Compression in a Planning cube

I was trying to compress 2009-2010 data in a planning cube and when i collapse the request it got csheduled but the compressio didnt happen.
When i look at the logs of the batch job it says that -
No requests needing to be aggregated have been found in InfoCube DE_RBQTPL
Compression not necessary; no requests found for compressing
Compression not necessary; no requests found for compressing
Job finished
Can you please help me in resolving this issue.
Thanks,
Sravani

Please check that all the request are loaded properly
into the info cube.
Is there any yellow request in the cube?.
Then wait for some time and two the compression.
Thanks,
Saveen

Similar Messages

Planning cube Key figure over flow error

Hi Experts,
I am getting the following Key figure errors in Planning cube while running the Planning sequences.
1.Over flow occurred when calculating KF
KF details : Data type: DEC-Counter or amount filed with comma and sign.
2.ORA-01455: converting column overflows integer data type
Data type : INT4- 4byte integer,Integer number with sign.
The number s are growing in cube and it is giving overflow error .We are compressing the cubes once in a week.we are using these KF's in two cubes.Please help me to resolve the issue.
Regards
Prasad
Edited by: PRASAD on Feb 1, 2009 9:39 AM

Hi Prasad,
Check here.........
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3131393536373226
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=460652
Thanks,
Vijay.

A/P & Consignment data pull to Planning Cube.....

I put this in "BC & Extractors" section, but did not get any response.....
Need couple of clarifications (brief background is provided.....):
1. We do DELTA extractions using 0FI_AP_3 adn 0FI_AR_4 to a base cube which includes both 'Open' and 'Cleared'
items. From this cube we do a DELTA load to a Planning Cube on a DAILY basis. We filter the data on Company Code
and 'Item Status' (OnlyOPEN Items) for Planning purposes. The key figure pulled to Planning Cube is '0DEB_CRE_DC'.
The bsae cube has data at Line Item Document level, where as the planning cube is only at Customer & Vendor level.
The question is - Will this Daily DELTA to Planning cube with filter on Open Item bring correct key figure? For example,
if the status of one of the items pulled as OPEN in earlier Delta changes to "CLEARED" the subsequent day, will the Key
Figure reflect the changes and show correct value? Is there any impact on the key figure due to the filter on Open Item?
My thinking is the key figure 0DEB_DRE_DC will reflect he correct number (adjsuted) since it is a summated key figure.
I could be totally wrong and want to understand this with comments from experts.
2. Has anyone worked with pulling Consignment (SMI) data into Planning cube? We pull this data using a generic extractor
from a SAP table "RKWA" with some logic. Since I pull A/P data that contains SMI & Non-SMI transactions. To avoid
Double Counting, how can I avoid bringing in the SMI transactions from A/P? There is no flag to diffferentiate the SMI /
Non-SMI transactions....
I am hoping someone has worked in these area to offer expert comments/ recommendations.
Thanks.. Shaun
Please post one question only once
Edited by: Vikram Srivastava on Aug 13, 2010 1:02 PM

Hello Lee,
For your first question as you are using the Filter on the status of the record,
lets say today the status is OPen and as a part of the filter the Delta will be able to pick this record as the status is OPen but if the status is changed to Closed tomorrow then this record will be completely ignored and hence in the next level target you will not have the right status at all.
So you need to plan your filters accordingly.
Hope this helps.
Thanks
Murali

How to Get the Current data into Planning Layout from the Planning cube

Hi,
I have a problem in BPS.   I am selecting the data from cube based on Month org details but I want to see the latest data.   How can i get this data into planning cube.
Like
data
Tran           cal month            org               amt
1                 jan                        a                  100
1                 feb                        a                   200
if i want to read based on Tran org as input values I shoud get the below data but I am getting the previous data.
Tran           cal month            org               amt
1                 feb                        a                   200
Kindly help me in this regard
Thanks
Naveen

Naveen,
    Are yo having issue when you save something in the layout, the data doesn't appear in the listcube ? Or do you have issue that the latest data you see in the cube doesn't appear in the layout ?
For the former issue, please look at your selections of listcube and for the second issue, please check your planning level definition, make sure all the restrictions you have applied are valid for this latest data to be presented in the layout.
Hope this helps.
Cheers
Srini

Unable to load data into Planning cube

Hi,
I am trying to load data into a planning cube using a DTP.
But the system throws a message saying that, real time data loading cannot be performed to the planning cube.
What would be the possible reason for the same?
Thanks & Regards,
Surjit P

Hi Surjit,
To load data into cube using DTP, it should be put in loading mode only.
The real time cube behaviour is set to planning mode only when the data is input to the cube via the planning layouts / or through the Fileupload program.
You can change the behaviour of the cube in RSA1 -> Right click on the cube -> Change Real-time load behaviour and select the first option(real time cube can be loaded with data; planning not allowed)
Best Rgds
Shyam
Edited by: Syam K on Mar 14, 2008 7:57 AM
Edited by: Syam K on Mar 14, 2008 7:59 AM

Automatically trigger the event to load data from Planning cube to Standard Cube

Hello,
We have a below set up in our system..
1. A Planning BEx query using which user makes certain entries and writes back data to the planning cube.
2. An actual reporting cube which gets data from the planning cube above.
Now, what we want to do is to automate the data load from Planning cube to Reporting cube.
This involves 2 things..
1. Change the setting " Change real time load behaviour " of the planing cube to Planning.
2. Trigger the DTP which loads data from Planning cube to reporting cube.
We want to automate the above two steps...
I have tried few things to achieve the same..
1. Created an event in SM64,
2. In the Planning cube "Manage" Screen, clicked on "Subsequent Processing" and provided the event details. ( Not sure if its the correct place to provide the event detail ).
3. Wrote a ABAP program which changes the setting of the planning cube ( " Change real time load behaviour " to Loading )
4. Created a process chain, where we have used the event as a start variant, used the ABAP program as a next step, DTP run as the last step..
This i hoped, would trigger the event as soon as a new request comes and sits in planning cube, which in turn would trigger the process chain which would load the data from Planning cube to reporting cube..
This is not working. I dont think the event is triggering, and even if does i am not sure whether it will start the process chain automatically. Any ideas please ?

hi,
try to do the transformation directly in the input cube by using CR of type exit, more details :
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/43/1c3d0f31b70701e10000000a422035/content.htm
hope it helps.

Error in delta loading from a planning cube

hi all,
I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
any help is appreciated.

Hello Ajay,
Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
It is a customizing issue to tell the infopackage to end "green" when it has no data.
Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
Hope that helps
best regards
Yannick

How to write data from planning folder into a planning cube in BPS

Hi All,
I have an issue in writing data from planning folder to planning cube.
I updated the excel sheet in planning folder in UPSPL tcode.
After clicking on save button in the excel sheet the data did not get updated into the cube.
I set the real time cube to planning mode.
Please let me know if there are any settings to save the data to cube or how can it be done.
Thanks in advance.
Regards,
Lavanya.

Hi Lavanya,
What do you mean by "the data did not get updated into the cube" ?
Don't you find a yellow request in the cube administration transaction ? What happened if you set it to green ?
Regards,
Fred

Data from planning cube to TEXT FILE IN directories of BW

hi all
i have 2 transactional planning cubes in BW. the data in these cubes in bw needs to be uploaded monthly in to a single text file so that APO system can access the data for some purpose.
my question is how to upload the data from transactional cubes to the text file, which is more detailed. is that use ful to construct a ODS or CUBE(basic) on top of the transactional cubes.
if i keep the file in BW directory whethere APO can access that.?..
please help me out
praveen.

Hi,
You could create a multicube over your 2 transactional cubes and extract your data with a query on the multicube.
Make sure you restrict 0REQUID 'request id' using 0S_RQMRC 'most current data' to be sure you extract the most recently planned data.
No need to convert the transactional cubes to basic cubes.
To download the query I think you have to use the reporting agent of the broadcaster.
Thanks for you points if you found this helpful or if this solved your problem.
Best Regards,
Filip

Newbie questions regarding pulling data from hyperion planning cube w/OBIEE

Hello there,
we've recently implemented Essbase and are currently pumping it full of revenue/expense data from out source systems to calculate NOI. This data is stored in a staging table at the detail level where it is sourced into Hyperion and aggregated. We also have OBIEE 10g (plan to upgrade to 11g later this year) and we would like to connect to and report out of Essase. Our ultimate goal is to be able to report on the NOI numbers in the planning cube but have the ability to drill down to the detail level which is not stored in Essbase. We've heard it is possible, albeit not native for OBIEE 10g to do this. We've also heard that it is not best practice to use our transactional cube for this type of reporting but to actually create a second "reporting cube".
What are best practices for getting this NOI data out of Hyperion and merging it with our relational detail reporting? Can we somehow export the data from the cube and store it in a relational database? Should we clone the cube (if even possible) and configure both it and our relational source in the BI repository and setup all drill-throughs there?
Any info is GREATLY appreciated. Thank you.
Edited by: cisGuy on Sep 20, 2010 5:31 PM

i have found information on how to use ODI to extract data for the cube. What I'm really trying to find out though is best practices for reporting off summary level data in Essbase with the ability to drill-through to the detail.
We've heard reporting off the same cube that users are writing back and transacting on is bad. Do we need to make a "reporting cube" and then bring that in OBIEE and merge it with a relational source or is it better to extract the data from Essbase into flat files and join it to detail tables in our relational source?

How to give planners read only access to Planning cube for ad-hoc analysis?

Hi Everyone,
I am trying to issue smartview reports to the planners. Most of the reports are coming off Essbase (reporting) application. However, we have to generate one report from planning server because of the text fields. Currently, on planning server, planners have access only to the forms. They dont have access to the planning cube. But to make them able to refresh this report, we need to give them access to the planning cube.
But we dont want them to do ad-hoc data write on planning cube. So my question goes like this - Is there a way for planners to have write access on the web forms but only read access to the cube through samrtview ??

The access permissions will match between planning and smart view if a planning connection is used.
Cheers
John
http://john-goodwin.blogspot.com/

Does exist a way to read data from IP planning cube with ABAP?

Hello All.
My scenario is as follows:
I have an ODS where we store costcenters to be planned. This ODS is loaded via a manual falt file load (regular dta transfer process). In order to avoid inconsisten data in the planning cube, I want to check in my ODS load process, if any costcenter which is already planned (it has planned data in my planning cube) is being deleted in the loaded file.
To do this, I need to access my planning data cube ( i guess also planning buffer), so my question is if there is any function module which retrieves data from a planning level as reference data.
Thanks a lot and best regards,
Alfonso.

Hi Alfonso,
note 1101726 shows how the plan buffer can be read.
     l_r_plan_buffer = cl_rsplfa_plan_buffer=>if_rsplfa_plan_buffer~get_instance( i_infoprov ).
     l_r_plan_buffer->get_data( EXPORTING i_t_charsel = l_t_charsel
                                          i_include_zero_records = rc_false
                                          i_r_msg = l_r_msg
                                IMPORTING e_r_th_data = l_r_th_data
                                EXCEPTIONS OTHERS = 2 ).
Please take a look at the note. You do not need to implement the after_burn_selection exit, but you can find sample code how to read the planning buffer. Please give it a try.
Another solution would be to use the function module RSDRI_INFOPROV_READ. But you need to make shure that you first close the yellow request. This can be done using function module RSAPO_SWITCH_BATCH_TO_TRANS.
Hope this helps
Matthias Nutt
SAP Consulting Switzerland

Issues with Writing back data to Planning Cube After adding a new characterstic

Hello,
We have two cubes and a MP on top of it. ( Reporting Cube and Planning Cube ). An aggregation layer has also been built and so does a planning BEx query on top of it.
Before Scenario: things were working fine as we were able to write back data to planning cube using the BEx.
After Scenario: We created a new Dimension in the planning cube and added a new characteristic ( lets call it ZX_KEY ) . This Characteristic holds the concatenated values of some of the other characteristics in its master data tables . ( For ex: Account_Customer ID_Country-code_Industry-code ).
This new characteristic is also present in the reporting cube and has been added and transferred to MP.
This new characterstic was added to the planning BEx query as one of the rows and we executed it the analyzer. After entering the required values for all characterstics ( including the newly added ZX_KEY ) and the key figure values, we tried saving it. Now this is where the Analyzer is throwing up this error..
~~Characterstic combination cannot be assigned to part provider ~~
~~Characterstic 'ZX_KEY'; Characterstic value 'R123000000_12_US_TX'~~
~~ Entered values are incorrect:Correct before navigation ~~
The value that we are entering ( R123000000_12_US_TX ) is picked up from the master data table of ZX_KEY by double clicking and selecting it from the fetched values. So i am not sure as to why its throwing up the above error. Request your help on this please.
regards,
Karthik

Hi,
Try to check that all characteristics are correctly assigned at multiprovider level.
hope it helps

Data requests in planning cube

Hi Friends,
I like to find out from you how can I delete from the cube data I loaded into a planning cube via planning activities given that the cube only creates new request after n thousand records have filled the request.
In short, how can I manage the changes I introduced, for example, delete the loaded data to undo?
regards
Michael

Hello Micahel,
There is one more easy option to delete plan data without having the need to close any open requests. BEWARE .. deleting data using this method will be difficult to undo once saved.
If you can identify the exact subset of data that you want to delete, you can create a planning level which has all the characteristics and key figures. Create a function of type delete.
You can then set the selection criteria in the planning level and delete the data. In most cases, we have restricted the access to this functionality to one or two super users only.
Hope this helps.
Sunil

Compression status of all cubes at a time

Hi Experts ,
How can I check the compression status of each cube without going into mange screen
Regards,
Puru

Hi Sven,
May be this is help full answer from Srini
Open 2 screeens RSMDATASTATE get the SID from this table where field = COMPR which is last compressed request in the cube
and nother table RSICCOMP - enter cube name and SID(SID from RSMDATASTATE ) and choose greater than - click on number of entries.. will show number of requests which are not yet compressed
Hi Srini Thank you very muh for urs help
Regards,
Puru

Compression in a Planning cube

Similar Messages

Maybe you are looking for