Compression Master software for compressing

Is anyone using Popwire's Compression Master for compressing their video?
I have it and want to test encode quality vs. Compressor but I am getting lots of internal muxer errors when I build. I have only been able to build one disc of about 3 seconds with a Compression Master encode.....

I know nothing about it but have a look at TrueCrypt (http://www.truecrypt.org/). It is a cross-platform application. Have you maybe thought about encrypting a flash drive and using that to store your files? I know it has a portable mode but again, I don't know anything about the program so you will have to look through the documentation.

Similar Messages

  • Compression software for Vado HD 2nd

    Could someone reccommend compression software for a Vado HD 2nd. Unless i can find some way to compress the rew files(most 3 minutes or less) the video is virtually worthless for internet updoading or emailing as it is mcuh two large in raw format as even short videos are about 50mbs.

    (Re: compression software for Vado HD 2nd? Thanks for the info. I started using Youtube for some of the videos, but some, especially where video quality is not important, I would like to have the email option. Handbrake should fit the bill for those. Thanks again for the valuable info, burrhead
    Just an FYI that the Vado file format is already a highly compressed format (H.264). it's just that it's also very high quality (ie HD) and file sizes are large for HD.
    That's just the fact of life if you want HD quality.
    If you want to downgrade the quality/bitrate/resolution, and are looking for a simple one-click solution, you can try a free app called "handbrake"
    <a rel="nofollow" href="http://handbrake.fr/"]http://handbrake.fr/[/url]
    However, In my opinion the best way to share videos with others isn't via email, but via Youtube. Upload your "raw" Vado file to youtube, and others will be able to view it in HD and the only thing you will need to send them is a URL not a file.
    Just an FYI that the Vado file format is already a highly compressed format (H.264). it's just that it's also very high quality (ie HD) and file sizes are large for HD. That's just the fact of life if you want HD quality.
    If you want to downgrade the quality/bitrate/resolution, and are looking for a simple one-click solution, you can try a free app called "handbrake"However, In my opinion the best way to share videos with others isn't via email, but via Youtube. Upload your "raw" Vado file to youtube, and others will be able to view it in HD and the only thing you will need to send them is a URL not a file.

  • I purchased Adobe Creative Ste 5.5 Master Collection for windows for my college student daughter in '12 and she would like to install in on her iMac.  Please advise on the process.  Software has not been used yet.

    I purchased Adobe Creative Ste 5.5 Master Collection for windows for my college student daughter in '12 and she would like to install in on her iMac.  Please advise on the process.  Software has not been used yet.

    you need to exchange your win cs5.5 for mac cs5.5.
    unfortunately, adobe only offers that for cs6, Order product | Platform, language swap

  • Unable to install CS6 master collection for mac book pro(late 2011)

    Recently, I have successfully downloaded Adobe creative suite CS6 master collection for MAC.
    However, I am unable to install it. After opening the installer nothing happens, it does not proceed further. I have tried copying the contents from MasterCollection_CS6_LS16.dmg to another folder and then open the install.app, still no progress.
    Please advice since I really need to install this.
    Screenshot below:

    Hey Vikrant thanks for the response.
    The situation is like this, I downloaded the image on my desktop pc(which is windows) and then compress & split the image using a winrar. I then transferred the files to my mac book pro and extracted the image there. Unfortunately, there was a bug in the unarchiver software that I was using on mac to extract the image.
    This bug was rectified today in a update given out by the dev.
    Now, I can install CS6 without any issues. Thanks for the repsonse once again.

  • Master Levels for multiple tracks on one CD

    working on an LP. of course, i would like all songs to be of the same volume/presence. how can i do this. with the little scrub volume marker on the lower right? i always thought it was levels for simply listening, but just realized it must be for the sake of Exporting to iTunes as well, right? i know you can adjust the master vol and master pitch via the track, but what role does the scrub marker in the lower right hand corner play?
    thanks!!!

    It's exactly what you think it is, it sets the final playing and exported level of the entire mix. To get all songs to sound like they're at a similar level you use the Master volume control with Compression, or limiting with-in GB. Using other software for proper mastering you might likely use a combination of Compression/EQ/Limiting.
    Search the web for "Mastering" to learn more.

  • Best DVD Burning Software for My Powerbook

    I just got a burner and was curious as to what the best software for burning was?

    The point is Popcorn does two things - compresses non-protected DVD media to fit a single DVD and some file conversions many of which you can cover with QT pro or MPEG Streamclip.
    Toast 7 does as well plus is a full service DVD /CD writiing program. Popcorn came out while Toast 6 existed which did not compress.
    For some reason Roxio still pitches Popcorn 2 and tries to sell it relentlessly to Toast 7 owners at a discount, which makes no sense. Since Toast 7 has the technology. I guess I should not be surprised as Roxio still pitches the new Toast 7 to people who already upgraded at a discount to Toast 7. From Roxio.
    As for a DVD burning program, it is not that at all - it is a MPEG-2 compressor and that is the extent of its value other than file conversions. You cannot make data discs or anything else since that would limit sales of Toast 7.
    The OP wanted a DVD burning program not a one hit wonder. Too bad you bought Popcorn, no need to flog it to people who want better.

  • Ocr software for pixma mg4120

    ocr software for pix ma mg4120

    Hi cdmead,
    The MP Navigator EX can be used for basic OCR functions. Scan text in scanned magazines and newspapers and display it in Notepad (included with Windows).
    Important
    PDF files cannot be converted to text.
    Text conversion may not be possible depending on the selected image's data size.
    Scan documents into MP Navigator EX and save them, then open the View & Use window from the Navigation Mode screen and select the image you want to convert to text.
    Note
    In the Photos/Documents (Platen) screen of the Scan/Import window, select Text(OCR) for Document Type. Text conversion may not be performed correctly if you select an option other than Text(OCR). You cannot select Text(OCR) when the Compress scanned images when transferring checkbox is selected on the "General Tab" of the Preferences dialog box.
    Click Edit/Convert, then click Convert to text file on the list.
    Notepad (included with Windows) starts and editable text appears.
    Note
    Only text written in languages that can be selected on the General tab of the Preferences dialog box can be extracted to Notepad (included with Windows). Click Set... on the General tab and specify the language according to the language of the document to be scanned.
    When scanning multiple documents, you can collect the extracted text into one file.
    Text displayed in Notepad (included with Windows) is for guidance only. Text in the image of the following types of documents may not be detected correctly.
    - Documents containing text with font size outside the range of 8 points to 40 points (at 300 dpi)
    - Slanted documents
    - Documents placed upside down or documents with text in the wrong orientation (rotated characters)
    - Documents containing special fonts, effects, italics, or hand-written text
    - Documents with narrow line spacing
    - Documents with colors in the background of text
    - Documents containing multiple languages
    Note
    You can also scan a text document from the OCR dialog box in One-click Mode and extract the text in the image to display it in Notepad (included with Windows).
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Blu ray software for mac

    I just installed my new internal LG Blu-Ray drive in my mac pro. Now the DVD studio pro doesn't recodnise my old DVD drive. I know the DVD studio pro is not designed for Blu-Ray so now I am looking for an ulternate for this software where I can make menu and chepters and it works with final cut pro and compresser. I have received a software cd with this drive, but that is for Windows. Where I can find LG Blu-Ray software for mac?
    Please help me.

    You mentioned that DVD Studio Pro does no recognize your old DVD drive.
    When you format your project, look at the bottom of the Format window under the Destination section.  The "Output Device" pop-up menu lets you choose between any device that DVD Studio Pro can write to.  Both your internal burner and LG burner should show up.
    Of course, this is all for NTSC DVD.
    If you're going to go with Adobe Encore, be sure to use CS6 (the current version).  Prior versions were problematic when it came to BD menus.
    -Warren

  • Tried to install software for canon pro 100 getting  message "you can't open the application "setup.app" because it is not supported on this architecture"

    tried to install software for canon pro 100 getting  message "you can't open the application "setup.app" because it is not supported on this architecture"
    any suggestions?

    This is what Canon suggested,  still doesn't work.
    Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
    Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
    http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
    You will be required to download and install the following:
    1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
    Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
    still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
    Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
    thanks for your reply A Brody.

  • I have never set-up a master password for firefox. Somehow the browser to locked mode, now, and requests a master password. How can I get it to unlock?

    There is no URL line, into which anything may be entered.
    Also, I reinstalled the program as well. No change. Still defaults to a request for a password THAT I HAVE NEVER CREATED.
    Full disclosure: I reached to reconnect a cable, and pressed my chest against my keyboard, while the computer was in sleep mode, with Firefox running in the background. When I stood, the browser was locked. I've tried all passwords I know, and use. No luck. The following addy will not load, even if entered into home page.
    chrome://pippki/content/resetpassword.xul
    Again, no url line opens, which I launch the browser, anymore. I just get the following message:
    Please enter the master password for the Software Security Device.
    Help! Thanks!

    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    *Open the Customize window via "View > Toolbars > Customize"
    *Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    **If other missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
    If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    *Open the Customize window via "View > Toolbars > Customize"
    *Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    **If other missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up

  • Adobe CS6 Master Collection for Mac licensing

    I installed Adobe CS6 Master Collection for Mac, licensed it and updated it on twenty iMacs.  This a University computer lab with many users.  Sometimes Adobe software starts in trial mode as if the license key hasn't been entered.  What could be the problem?

    Hi Gutech,
    Could you please tell me how did you install Master Collection on 20 machines.
    If you have installed Master Collection on 1 Mac and created an Image of the OS and then installed it on the 20 Mac's then you may come across with this kind of issue.
    In Order to properly deploy the Master Collection please use our Deloyment Tool to create a Serialised Package and then use the same to deploy it on the 20 Mac's.
    You can find the Deployment Tools in this Link
    http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html
    Regards,

  • Master Password for Saved Username & Passwords

    I have been a Firefox user for many years - avoiding Safari - until I found out there are a number of plugins that I need and will make using Safari a possibility. One feature I LOVE on Firefox is the way it handles passwords. I have one Master Password that I have to enter in order for Firefox to auto-fill my username and password that is saved.
    Is there a way to do this in Safari? Is there a free plugin that will add this feature?

    Hi and Welcome to Apple Discussions...
    s there a way to do this in Safari? Is there a free plugin that will add this feature?
    Yes. No need for a plugin.
    You don't need third party software for usernames and passwords. You have the Keychain Access application already. (Applications/Utilties).
    To set Safari preferences, launch Safari. From the Safari Menu Bar click Safari/Preferences. For usernames and passwords select the Autofill tab.
    Select the box next to: Usernames and Passwords.
    In Safari, go to a site you login using a username/password. You will be prompted to save that data so a "keychain" can be created for you.
    Carolyn
    Message was edited by: Carolyn Samit

  • Master collection for K12  500 license pack - installation error

    Dear All,
    our client has a problem with his license installation. He bought a Master collection for K12  500 license pack. He were made an „msi” package with Adobe Application Manager Enterprise Edition application, because he didn’t want to activate one by one the softwares. When he tried to install it, but most of the time it was fail. He has some of different phisical place, where he want to install. He has three „Domain controller” account –if he use this, the installation was OK, but if he try to install  in „Local administrator” or „User” account – it Doesn’t works. 
    He would like to use for the installation with the „Local administrator” account too – please tell me, what’s the method?
    Thank you for your help.
    Regards,
    Tunde

    Hi,
    I would suggest using the Adobe Support Advisor which will analyze installation log files to detect the cause of the problem and will also try to point you to troubleshooting documents relevant to the error you are facing.
    The above link will will also help you with downloading and using the Support Advisor.

  • I've been using a master password for years. Today I noticed that it had been cleared. What could cause this?

    I've been using a master password for years. I also use Sync. Today I wanted to look up one of my saved passwords. When I went to do this I noticed that Firefox was no longer set to use a master password. I'm afraid that I may have been hacked, or that something else happened (recent Firefox update?) that caused the use of the master password to be disabled.
    I have not yet checked my other Synced computers to see if their master passwords have also been turned off.
    I have re-enabled the master password feature on this computer.
    On this particular computer, I've had a long-standing issue where Firefox "Help>About Firefox" always shows that I need to "Restart to Update". This means that I cannot use "Help>About Firefox" to check for and install the latest version. I need to download Firefox manually and update by running the installer.

    Hi,
    You can try to '''Clear Now''' the '''Active Logins''' with '''Time range to clear''' set to '''Everything''' via '''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History Clear Recent History]. Alternatively via '''Tools''' ('''Alt''' + '''T''') > '''Options''' > [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Advanced] > '''Encryption''' > '''Security Devices''', select '''Software Security Device''' and choose '''Log Out'''. You can then restart Firefox and check.
    If the problem persists you can reset Firefox and start afresh.
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    If you would like to take a listing of the add-ons, changed preferences/settings etc. to quickly replicate the previous profile, please '''Copy all to clipboard''' (on the left of the reset button), and paste it into MS Office Excel, or OpenOffice/LibreOffice Calc, or notepad. However, it would be a good idea to check for the existence of the issue immediately after the reset.
    For the update error, please try searching for all instances of '''updates.xml''', open the containing folder to make sure it belongs to Firefox/Mozilla (path) and delete all instances of the file along with the '''updates''' folder.

  • Bypass master volume for constant white noise play (KDE)

    Is there a way to play sound while ignoring the master volume control, even bypassing mute?
    I have tinnitus (ringing in the ears) and I get relief of these symptoms by playing white noise 24/7, I currently am using http://playnoise.com/ but there are many different sources of white noise, it could even be an mp3. I like it to be playing at the same volume, all the time, no exceptions. But, when I turn the volume up and down via my media keys or system tray, for a song playing in Amarok or a video playing in YouTube the white noise is also turned up and down, this is not needed or desired.
    What I'm trying to do goes against the definition of what a master volume is, but I figure it's worth a shot to ask.
    The next option would be to have volume adjusters for applications which I have seen done before. 90% of the time I'm adjusting web browser volume.
    (I have medium-ish experience with Arch)
    Thanks
    Last edited by spotshot6544 (2013-09-22 21:42:48)

    tricky, but you could achieve that with alsa's softvol plugin.
    first you need to have alsa-plugins installed
    then add something like this in your ~/.asoundrc
    pcm.!default {
    type plug
    slave.pcm "softvol"
    ctl.mixer0 {
    type hw
    card 0
    pcm.softvol {
    type softvol
    slave.pcm "hw:0,0"
    control {
    name "Master2"
    card 0
    this should create software volume control called 'Master2' and make applications use it as default (you need to restart all audio applications and sound servers until it takes effect.)
    now you should be able to play white noise from mp3 and set the 'real' master channel for it's output, while all other applications are controllable via Master2. Ideally you should set your card's real master volume to 0db
    only issue with this that your white noise will be played full blast unless the application from where you're playing it from has its own software volume control. You can solve this by adding another softvol device in your .alsarc (simply copy the pcm.softvol part and change the control name from Master2 to something else) and use it as output and volume control for the noise.

Maybe you are looking for