Compression missing in aiff export

I can't seem to figure out what is going wrong here. I fimalized my mix so it sounds great, and added compression to even out the volume. When I export, however, the compression seems to be missing, and there are several jumps in volume.
I've read a few posts on this board with similar problems, but they all seem to point to mismatching bit and sample rates.
My input files are 32bit, 48khz, my project is 48khz, and I'm exporting at 16bit 48k (export won't allow 32bit).
I also tried moving the compression from the Master Mix to the Submix, but to no avail. (Annoying, though, because I can't seem to find a way to copy an effect from one track to another.)
How can I get my export to be like my mix? Help! Under a tight deadline here!
-t

You know, I had this problem with one particular project, but since then it's seemed to behave a little better... or perhaps the differences between playback and export haven't been as noticeable in more recent projects. There were definitely two distinct moments in that project that I couldn't fix.
Did you try the export using compressor option? I'm doing that every single time now.

Similar Messages

Missing data when exporting webi to excel (not 65536 limit problem)

Hi guys
I just meet a problem about webi that it will miss data when exporting webi to excel.
It's not about 65536 limitation, as my webi report do some aggregration and limitation and never beyond that limitation.
Also there are 2 tabs in my reports, if I split the 2 tabs into 2 separate reports and export them separately, then problem disappeared.
Any ideas on this?

Hello Claes
according to:
http://help.sap.com/erp2005_ehp_05/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Tools => Import and Export => Specifying the Sequence of the External Data Structure => External File Structure: Specification
Table EST07 should be part of export file. I am not sure if the packing requirement ist part of EST07.
Furthermore wirh ECC 6.0 EnhPAck3 some changes happend generally in the area of DG classification.
E.g. Dynamic dangerous goods classification. I am not sure if these changes are "included" in some sense in the EH&S data download.
With best regards
C.B.
PS: please check this link on the top:
http://help.sap.com/erp2005_ehp_05/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Refer to "Table Assignment: Specifications"
I believe packaging requirement is part of table EST0B but this is part of the download file.
Edited by: Christoph Bergemann on Aug 27, 2011 7:12 PM
Edited by: Christoph Bergemann on Aug 27, 2011 7:13 PM

Entities missing on pixel export

in illu cs6 x64 there are objects missing in the export file like jpg or png.
saving as pdf contains all objects.
is it a bug or an unseen feature??

Try checking Use Artboards
A screenshot of what you are working on would help us figure this out. You may have something white, set to overprint in the attributes panel, or a variety of other issues from save for web or export.

Compressed dump file while export on Windows!

Hi All
Could someone suggest how do we take and compressed dump file while exporting on Windows environment with oracle 9.2.0.6.Please specify the exact syntax how to proceed on this.
Thanks
Bala.

I don't think that exp tool can compress the export file it is creating (the compress parameter has nothing to do with the export file but with the way the database objects are going to be created in the target database).
If you run export under Unix, there is a possibility to use Unix pipes to compress the export file during the export using Unix commands (compress or gzip for example). I don't know how to do something similar under Windows I have some doubts about this possibility.

SSRS 2008 R2 - Missing Data when Exporting to Excel or CSV (Row Count is 500)

Hey Folks,
When exporting SSRS 2008 R2 report to an csv or excel file not all the rows are being exported. Any suggestions on why this is occurring. The number of rows is less then 500 and it seems to be a pretty straight forward export. Any help is
greatly appreciated. Inherited this and not sure if this would be configuration issues or something else. It is happening on a number of reports.
Thanks.

Hi Humbly,
According to your description, when you export report into CSV or Excel format, some rows are missing.
In your scenario, since you are missing data “rows” in your exported file, we are guessing if you have any visibility setting like toggle which hide those records. It’s possible that you have set toggle or visibility in your report. After exporting
Excel/CSV, some data might not appear properly. In SSRS 2008 R2, it has reported this kind of issue about data missing after exporting. However, those scenarios are not exactly same as your issue. It mostly turns out be conflict between data and “layout render”
and related to DataElementOutput property. DataElementOutput property controls export behavior, it indicates which report item data should appear in Excel/CSV render. For more information, please refer to this article: Reporting Services:
Why aren’t all my report columns exporting to CSV and/or XML?.
As we tested in our environment(SSRS 2008 R2), no matter what we export into CSV or Excel, we get same results as in BIDS . So I would like to know your report design structure. If possible, please provide some screenshots about results in BIDS and Excel/CSV
render extension results. It may help us find out the root cause of your issue. Thank you.
Best regards,
Qiuyun Yu

Missing text after EXPORT from PMD to PDF

Hi,
I have a document, designed through Adobe pagemaker 70, which I would like converted to PDF. Within Adobe PageMaker 70 I performed a File-->Export-->Adobe PDF, kept all the default options and managed to generate a PDF version of the *.PMD document. However, some of the text in the PDF document is missing. I searched on the internet and discovered one can do Document-->Examine Document within Adobe Acrobat 9 Pro to display any hidden text. Doing this I was able to see the missing text.
There is an image in the source Pagemaker document, but the image is not square but cropped along it's outside edge and the text flows around the edge (hope that makes sense). What's puzzling is that in Adobe Acrobat 9 Pro the generate PDF has the image displayed in a box and some (not all) the text behind this box is shown as hidden, where as in the source document all text flowing around the image is visible.
Can anyone please help with this problem and tell me how I can get the hidden text in my PDF document to display so it's visible in an Acrobat Reader or when printed?... I am still a bit of a newbie with both Pagemaker and Acrobat so your help would be much appreciated.
Thanks in advance.
Sharon
PS: I have not uploaded the file but do not mind doing so if some one is able to help and requests either the source PMD file or the generated PDF file

Hi,
The "question mark" displayed may be refereed to the missing font.
Are you trying to convert a public web page? if yes then please share a link so that i can also test it.
Regards,
Anoop

Missing data when exporting to "MS Word (*.doc)" and "RTF (*.rtf)"

Hello,
We are using CR XI R2 SP3 in our product. The reports that we generate (using ODBC dsn) show URLs from the database as hyper link text fields. When we export the report to "Microsoft Word (.doc)" or "Rich Text Format (.rtf)" format, even though the export operation succeeds, the report is missing data when it encounters a URL that looks like following. There is basically no data after that URL.
http://www.xyz.com/kType=t;s.linkName=n;s.t()};s.ssl=(s.wd.location.protocol.toLowerCa
And when it encounters a URL like following, MS Word complains that the file is invalid even though the export succeeds.
https://www.xyz.com/m));if(m%3E0&m!=e)if(parseInt(c.substring(m+1,e%3C0?c.length:e))%3Cd.get
If we export the report to pdf format, then everything works just fine.
Any help on this will be highly appreciated.

Hi Sumit
Try to set the URL field with the RTF format. To do this try following:
1. Right click the field->Format Field.
2. Click the paragraph tab->Text Interpretation->RTF Text
Now try to export it.
Hope this helps.
Regards
Nikhil

Characters missing in PDF export on Windows

I have a EPS logo placed in InDesign.
When I export to a PDF there are characters missing in the PDF:
When I check the PDF's fonts it lists them as using a custom encoding.
When my collegue uses the same logo in InDesign on a Mac, all the characters are included in the PDF and the fonts are listed as using ANSII encoding.
If we open the logo in Illustrator and export it as an EPS, it works properly on both platforms. However, since we typically place this type of logo via scripting, we would like to be able to either have a fix for the bug or be able to identify the what types of logo files causes this issue so can automatically check the logo before using it. Is this a known problem?

Hmm .. (HelveticaNeue was a likely candidate for the source of your problem if, and only if, the file was made on a Mac -- its system version of HN is a bit ... messed up ... by Apple.)
Just for clarity, can you check with what software this EPS was made? Open it with a regular text editor, that info should be somewhere in the first lines, usually in a line that starts with "%%Creator:".
If you drop the EPS file on Distiller, is the resulting PDF okay?

Missing titles on export or closing out project/reopening

in FCPX everytime we export (either with the export in FCPX or sending to compressor) or close out project and reopen project -some of our titles go missing and show up as back as the default title or placement of our title gets moved back to default position - any thoutghs?

I don't think any amount of reinstalling is going to help.
I & others have the same problem with titles - https://discussions.apple.com/message/16179024#16179024
At the moment I'm resorting to using Motion for titles.
Which is really a ridiculous solution, but these are serious bugs.

Crystal Report "some parameters are missing values" while exporting/printin

I am able to pass parameters from a JSP to a crystal report through CrystalReportViewer and view the report. (I tried doing it using the code provided on this help forum. I was getting a message: "Some Parameters are missing values". I had to add 1 line: pfield1.setReportName(""); for every parameter field. And It worked..)
Now I can see the "Print" and "Export" buttons. But when I try to print or export the report, I get the same message "Some Parameters are missing values".

see posting "parameter driven export to excel" on April 26th

**Missing Audio when Exporting to HD**

Hi,
I have been trying to find a solution to missing audio for sometime and there are many discussions on this forum regarding this topic. I have an external drive and in the past I have lost audio, I guess because the event and the project were on different drives, I have resolved that. Also, the problem that I have is not related to the speed of a clip or that I have more than 10GB in my events (I don't). There have been other audio issues and I have always been able to resolve them but this one has me stumped! I thought that perhaps the graphics card was not up to the task but this has just happened and now I am confused.
I have just completed a project that was only 3 minutes long 403.5 MB. The movie was imported to iMovie from my video camera and listed as an Event, I also used movie clips and stills from iPhoto, I added titles and transitions. I then exported the movie to Media Browser (mobile size) so that I could import it into Garage Band to make an soundtrack. I then exported the soundtrack as an AAC to iTunes (as I have read that there are issues with MP3 and audio missing). I then opened iMovie and dragged the soundtrack into my project and republished the completed project to Media Browser in the HD size. No problem all works well, I was really happy! Onwards I thought and get another 2010 video finished, wrong!
On my next project I have done everything that I have described above, this time the project is only 349.8 MB (smaller). The audio on the HD size has failed. I have copied all the files onto my desktop and reimported everything. I have tried exporting using Quicktime or as a Movie but still no audio. I have found that the 'consolidate media' is grayed out when I have all my clips in the project editor, because they are all on my hard drive. As soon as I add the iTunes track that I have exported from Garageband the consolidate media option becomes available. If I select this I then get the message that the iTunes track cannot be copied as it is not on my hard drive! It is on my hard drive (I disconnected all external drives so that there would be no confusion!).
I cannot understand how the first project worked and the second smaller project failed using the same process! I thought that I would share this information with the forum in the hope that perhaps a solution can be found. I am able to publish the second project to my mobile me in the large and mobile sizes, it would be good to have the HD size for a DVD. There seems to be no logical pattern to the audio disappearing on export. Your thoughts or help would be very welcome.
Kind regards,
Watchthebat.

In Soundtrack if you have selected to use only channel 2 of a stereo file (right click on stereo file and select mono->channel2) you will hear channel 1 when you export. Its a massive bug.
Could that be the source of your problems? The bug can certainly create exported mixes that sound like stuff is missing.
There's a recent thread around here about this.

Gis map legend missing on .pdf exporting

Hi guys,
i've a big problem with the WAD exporting for printing.
I've a simple gis map template with legend visible.Template is running fine on internet explorer but when i try to print report (right clic on the map - printable version) in the output .pdf file the legend is missing.
I try everything: with ie print, with adobe pdf ie add-on, exporting in excel format but the map legend is always missing.
Can anyone help me?
Thanks in advance.
Andrea

Hello Andrea,
you should check the properties for the map web item in your export template.
The content template is 0ANALYSIS_PATTERN_EXPORT for the print version.
There might be the "display legend" flag turned off.
Regards
Tobias

Missing masters in exported library

I have a managed library in Aperture 3. I am trying to export a project as a new library so I can transfer it to another mac.
After I have exported the project as a new library, if I open the new library, many photos have the badge saying "Missing master". I have exported with "Consolidate masters" and "Include previews" options active but it still happens.
In the original project, there is no "missing master" badge.
Does anyone know what's gone wrong here?

Ann's link is to install the "functional content" for Premiere Pro and Encore. This includes templates and styles in addition to the Encore "library." To get the templates (I think this includes Flash export templates), you must install this. However, this installs only a limited library of full templates - no buttons etc.
I think the OP had already downloaded and installed this.
John's link is the latest version of the full Encore library. An earlier version (but probably identical in content) is at the bottom of the link Ann provided. I think they improved the file size at some point.
Getting the filename the OP downloaded would help.

Missing elements when exporting in After Effects CC

Hi there,
I really hope someon is able to help me with this problem.
I have this animation in After Effects. It contains PSD files of lines. I animated the lines using the Stroke-tool form AE.
When pre-rendering the animation does what it's supposed to do. It works fine.
However, whenever I try to export it through Render Queue, it seems to forget just two PSD elements in my project. I can already see the animation will not export as it's supposed to do while rendering in the render Qeueu.
I've tried several things:
- Change my PSD files from CMYK to RGB and replace footage in After effects
- Copy my original PSD files and replace footage in AE
- exporting in different kinds of files (MOV/AVI) H264
Can anyone help me? I've searched on Google but couldn't find anyone with the same problem.
Further info:
- I'm using Adobe CC (legal of course )
- Windows 8
- I've updated my computer with every update available
Please help?
Thnx!

What is the full version number of AE that you're using? 12.2.1.5? 13.2.0.49?
Can we see a screenshot of your timeline panel with the missing layers? Are they set to guide layers?

Missing Frames after exporting a video with Premiere Pro cc

Hi guys, i was working on adobe premiere pro cc (342) at work, is the first time i use cc,
by the way, 40 minutes mp4 video(h264/aac,720p), a video of 100 clips,50 images(title image), fade in/out (each clip), and other stuff( all the clips are mp4).
i go for exporting in h.264/aac, maximum quality rendeing,and after a perfect exporting(premiere pro cs6 takes 7 hours, premiere pro cc takes only 25-30 minutes,shocking) i see that the exported video is fantastic, but some video frames are missing(the image/title stille remains there), and sometimes even the image/title disappear for some frames, sometimes il like a intermitted flashing.
i use mpe with my HD7970, is the first time i use it, and during the exporting my AMD FX8350 runs over the 90% of use, it's ok for me, but i want to use ppcc and exporting without problems.
can you help me?
sry for my bad english.

I've never seen an export come out with frames missing. Try turning of hardware acceleration.

Compression missing in aiff export

Similar Messages

Maybe you are looking for