Compression of 2lis_03_BX data gives CX_SQL_EXCEPTION error

Hi,
I'm trying to compress data(from 2lis_03_bx) in inventory cube and am getting the foll. error..
"Insufficient input parameters supplied (Exception CX_SQL_EXCEPTION occurred (program: parameter is missing)
Message no. RS_EXCEPTION102
I would really appreciate if anyone has any thoughts on this.
Thanks,
Ritu

Hello Girija,
Please check OSS note 973969.
Regards,
Praveen

Similar Messages

Reader XI still gives "insufficient data for image" error

Our fax machine creates .pdf files of the faxes and recently our back office has had trouble printing them. When I look at them they give an "insufficient data for image" error, but only on one page each. I've tried upgrading to reader XI but the problem persists. I've gotten around it by taking a screenshot and printing the one page that doesn't work so far, but I'd like to get this fixed. It only started happening today. I have a call in to our fax provider, but I was wondering if anyone here had any possible solutions.
Thanks,
Also due to the nature of the documents I'm unable to provide a sample.
Message was edited by: riderryuken

It is also happening to me (running v 11.0.2). I tried adjusting the various settings under the "View" menu and at best could only see part of what was missing. I resolved the issue by downloading and installing Foxit Reader. Bingo! now I can see the entire document.

Hi installed Photoshop Cs6 on my Vista os and crashes gives following error DEP (Data Execution Prev

Hi installed Photoshop Cs6 on my Vista os and is crashing the Photoshop and gives following error DEP (Data Execution Prevention) can someone help me..

no I did not receave any errors during instalation. Yes I installed it before but occured same problem so I unstalled and made a new isntall.
I found these in the end of the log hope these helps.
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
[ 4460] Fri Nov 02 19:54:12 2012 INFO
Exit Code: 0 - No error.
Please see specific errors and warnings for troubleshooting. For example, WARNING: DF029, DW024 ...
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

3.1EA2 simple table copy including data - gives error

hi
3.1EA2 simple table copy including data - results in error-message "Ora-01403 data not found Ora-06512 line 1 ....."
..... copy failed
although the copy did succeed and the table including data was copied.
regards Karsten

Hi Brian,
3.1EA2 shows a little bit improvement on the copy paste from grid.
However, these are another cases which I found :
1. This happens everytime
-invoke any select
select sysdate
from dual;
- leave the cursor position on after semicolon
- copy and paste the grid result, unto worksheet, so it will become like this
select sysdate
from dual;17-NOV-2011 10:42:29
- now, again copy the grid result using (ctrl + C)
- the selection on grid suddenly loose its focus (the yellow rectangle is disappear), instead the cursor on SQL worksheet makes selection.
- therefore the clipboard does not store the grid value
2. Intermittently, usually happens on the third attempts
- invoke any select
- copy and paste any cell into worksheet, press Enter
- copy and paste different cell into worksheet, press Enter
- copy and paste another different cel into worksheet, press Enter
- you'll notice the copy does not copy the correct value
- the workaround for this problem is to press Ctrl + C several times on the cell before pasting.
Regards,
Buntoro

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

My 3.6.14 keeps trying to update and gives this error message:"The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again."

My OS is Windows XP version service pack 3. I even tried to install FF4 but it never get installed. As I mentioned my FF keeps trying to update itself but it gives the error message I provided in title. Now I don't have access to my FF browser and my life is stopped because I have all my passwords saved on FF. I restarted my notebook but it stills try to update itself giving the same error message. I can not also upgrade my Adobe reader 7.0.7 to 10 I have tried more than 10 times but it never gets upgraded. I had this Adobe problem since long time ago.

Run the Firefox program once as Administrator (right-click: Run as Administrator).<br />
If that doesn't help then do a clean reinstall.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* http://www.mozilla.com/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Enhance BW Extractor - Transactional data ABAP CODING ERROR

i need to enhance CRM extractor with additional field.
This is transactional data so i used Exit_rs_001
Here is the extractor result -
Guid...date...........objectid...item guid
1122......1.1.10....901..........8811
1122......2.1.10....901..........8812
1123......1.1.10....902..........8813
1123......2.1.10....902..........8814
now i need field Product id in it which is called from DB Table CRMD_SRV_REFOBJ
itemguid...referencekey...product
8811............01.................110011
8812............02.................110012
8813............03.................110013
now i want to extract data--
Guid...date...........objectid...item guid...product
1122......1.1.10....901..........8811.........110011
1122......2.1.10....901..........8812.........110012
1123......1.1.10....902..........8813.........110013
so i appended the extractor...with field zproduct
FOLLOWING Code doesnot work:::
DATA: L_S_INFOSTRU LIKE ziw_orderma_i.
CASE I_DATASOURCE.
FIELD-SYMBOLS: <PRO_01> TYPE ziw_orderma_i.
CASE i_datasource.
WHEN 'ziw_orderma_i.'. " Upper case
LOOP AT c_t_data ASSIGNING <PRO_01>.
SELECT PRODUCT_ID INTO <PRO_01>-zZPRODUCT
FROM CRMD_SRV_REFOBJ UP TO 1 ROWS
WHERE ITEM_GUID = <PRO_01>-CRMD_SRV_REFOBJ.
ENDSELECT. " not whole primary key
ENDLOOP.
ENDCASE.

actually
coding doesnt give any error
but in output in rsa3 i dont see any data
it worked fine wit the same code for master data datasource in exit...2
now same code different parameters doesnt work in exit..1 for transactional data.

GRPO with Freight gives an error ...

Hello Experts,
When I post a GRPO without Freight it gives no error, but when I try to add with Freight Amount it gives an ERROR.
Inventory Account is not defined [Goods Receipt PO - Rows - Warehouse Code] Message 173-77.
Freight Setup: for that perticulat Freight that I am using... is Revenue and Expense Accounts are defined... Distribution and Drawing Methods are Quantity and Stock Check Box is CHECKED.
Help Required...
Thanks & Regards

Hello Nazir,
If your the items are set up with 'GL accounts managed by warehouse' (this is defined under the Inventory Tab of the Item Master Data), you should check that all the accounts for the warehouse have been set up under Administration => Set Up => Inventory => Warehouses => Accounting Tab.
In particulary you should check that you have defined an Expense Account for the specific warehouse in the GRPO document.
Also since you have chosen to affect the stock with additional expenses you need to specify an offsetting G/L account to the Stock account for clearing journal entries created by A/P Invoices and Goods Receipt POs.
I hope it solves your issue.
Kind Regards,
Magalie Grolleau
SAP Business One Forums Team

Ccashut gives an error

I'm trying to load data from SQL Server to Oracle. When I try to deploy my mapping, default agent gives an error and says restart agent. Ok, I go to Linux and say "ccashut", give pwd and get this:
[oracle@xware unix]$ sh ccashut
Checking admin port: 23791
Enter password:
Error: Could not connect to the remote server. Please check if the server is down or the client is using invalid host, ORMI port or password to connect: Disconnected
Exiting due to error.
That "remote server" is very weird, it's on the same server? How can I fix this, this is now a show stopper because I can't deploy my mappings. I have the Linux server in my clients hosts-file, I know pwd is right and now I don't know anymore what to do...
Thanks in advance,
Mari

I'm trying to deploy a mapping but can't do it because OWB says that CCA must be restarted (and that's done using ccashut ans ccastart, according to owb manual). Default agent location must be registered before I can deploy a mapping and that registration fails with "restart" error.
Connection failed. CCA-1536: Control Center Agent is unavailable, please restart. Details are: Error reading application-client descriptor: Error communicating with server: Connection refused: connect; nested exception is: javax.naming.Communication.Exception: Conenction refused: connect [Root exception is java.net.Connect.Exception: Connect refused: connect] ormi://xware:23791/jrt
BR,
Mari
Edited by: 860361 on 23.5.2011 0:47

Interactive report gives an error only for a specific user

An interactive report based on a very complicated select gives an error only when a specific user is logged on.
The error is:
ORA-00932: inconsistent datatypes: expected - got CLOB.
For other users logging using this page it works fine.
Authentication for this application is done using a stored function.
The query does not use the current userid in it.
Why does it fail for a specific user? if there is a problem, it should fail all the time.

Hi ankur,
By what you said the report dont have any date parameters or no date columns.
"Query execution was not successful ORA-01843 not a valid month." This means it is related with date mask passing a invalid month into date column or argument to to_date function.Check once the session date that is 'dd-mm-yy' or anything else
select * from nls_session_parameters where parameter = 'NLS_DATE_FORMAT'
select to_date('01-DEC-06'),to_date('01-12-06') from dual;
Also a general question whenever I am trying to mark any question as 'Helpful', the status is not changing. Is there anything I am missing.While you flag it 'helpful' or 'correct',it takes you to other screen where you see "Yes, the question is now answered" click the radio button and then click ok button.
Hope its helpful.
Best Wishes,
Kranthi.
Edited by: Kranthi.K on Jun 8, 2009 9:00 AM

How to make screen field enable when table control gives an error

Hi,
I had a scneario like when table control data wrong then one parameter of the screen should be enabled for the input, i knew that screen-name will not work since it will have always table control fields only when table control gives an error.
How to make the other parameter enable when table control throws an error.
Regards,
Jaya

Hi Gobi,
Thanks for your response, but issue is - how to make other screen fields enable when there was an error in the table control data.
For table control - lets say we will use the code as i mentioned above.i am sure that we cant write the code for field enable in between loop & endloop.
as you said if we right outside the loop-endloop, the module wont be triggered when table control throws an error, because that statement was not there in the loop-endloop.
please let me know if you need any more information on the issue. I hope there is alternative for this in SAP.
Thanks
Jaya

Blue screen - Data Inpage Kernel Error on Satellite Pro L

I have had my laptop 6 months now.
Now a blue screen comes and says - Data Inpage Kernel Error.
I reset back to factory settings but it is still happening.Is the hard drive knackered?
If so is it covered by the warranty?
If not which hard drive do i need and where can i get it from.
Many Thanks for your help.

Hi mono33,
> I reset back to factory settings but it is still happening.
This would mean its no software malfunction and its serious hardware issue. If your notebook is under warranty, the repair is covered by warranty and ASP will repair the unit for free.
So at first I would check if the notebook is under warranty. If yes give it to an ASP and the gus can repair the notebook. Otherwise you can also ask an ASP for help but its not for free.
Theoretically it could be HDD related but it could be another hardware part as well.

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding",

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you

If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

Software update for iTunes gives an error. Please help.

It gives an error while performing a software update to iTunes 12.0.1
Error as seen below:
The update “iTunes” can’t be installed.
An unexpected error occurred.
My current iTunes version from About iTunes is 11.4(18) 64 bit
I saw few of them posting their install.log from console which I am putting for reference. Please help to update the version.
Marker - Dec 17, 2014 11:43:08 AM
Dec 17 11:45:36 Mihirs-MacBook-Pro Software Update[754]: JS: 10.7.5
Dec 17 11:45:37 Mihirs-MacBook-Pro diskmanagementd[769]: DM ->T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: inHostDiskUDS=0x107a39c20=disk0s2=Macintosh HD inWhatStr=RecoveryInfoBaseSystemVersion
Dec 17 11:45:38 Mihirs-MacBook-Pro diskmanagementd[769]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did get booterRecoveryUDS=0x107a39ae0=disk0s3=Recovery HD
Dec 17 11:45:39 Mihirs-MacBook-Pro diskmanagementd[769]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did mount nobrowse; MP=/Volumes/Recovery HD OMS=0x7f9903006430
Dec 17 11:45:39 Mihirs-MacBook-Pro diskmanagementd[769]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: getting dict from file=/Volumes/Recovery HD/com.apple.recovery.boot/SystemVersion.plist
Dec 17 11:45:39 Mihirs-MacBook-Pro diskmanagementd[769]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: got dict (or NULL=will return err): oooInfoDict=0x7f9901419cb0
Dec 17 11:45:40 Mihirs-MacBook-Pro diskmanagementd[769]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did if-needed-best-effort unmount
Dec 17 11:45:40 Mihirs-MacBook-Pro diskmanagementd[769]: DM <-T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: retErr=0 outInfoDict={
     ProductBuildVersion = 11D2001;
     ProductCopyright = "1983-2012 Apple Inc.";
     ProductName = "Mac OS X";
     ProductUserVisibleVersion = "10.7.3";
     ProductVersion = "10.7.3";
Dec 17 11:45:48 Mihirs-MacBook-Pro Software Update[754]: JS: 10.7.5
Dec 17 11:45:51: --- last message repeated 1 time ---
Dec 17 11:45:51 Mihirs-MacBook-Pro Software Update[754]: JS: Firmware is up to date.
Dec 17 11:45:51: --- last message repeated 1 time ---
Dec 17 11:45:51 Mihirs-MacBook-Pro Software Update[754]: JS: model = MacBookPro8,1
Dec 17 11:45:52 Mihirs-MacBook-Pro Software Update[754]: JS: 10.7.5
Dec 17 11:46:01: --- last message repeated 4 times ---
Dec 17 11:46:01 Mihirs-MacBook-Pro Software Update[764]: Acquired Lock: 501, 754, 0
Dec 17 11:46:01 Mihirs-MacBook-Pro Software Update[764]: Releasing Lock: 501, 754, 0
Dec 17 11:46:27 Mihirs-MacBook-Pro Software Update[754]: Calculated need 1870.195 MB; 317806.137 MB free; 317806.137 MB available with MTM reclaim
Dec 17 11:46:27 Mihirs-MacBook-Pro Software Update[764]: Acquired Lock: 501, 754, 0
Dec 17 11:47:58 Mihirs-MacBook-Pro installd[760]: PackageKit: ----- Begin install -----
Dec 17 11:47:58 Mihirs-MacBook-Pro installd[760]: PackageKit: request=PKInstallRequest <5 packages, destination=/>
Dec 17 11:47:58 Mihirs-MacBook-Pro installd[760]: PackageKit: packages=(
     "PKLeopardPackage <file://localhost/Library/Updates/zzzz031-08056/iTunesX.pkg>",
     "PKLeopardPackage <file://localhost/Library/Updates/zzzz031-08056/iTunesAccess.pkg>",
     "PKLeopardPackage <file://localhost/Library/Updates/zzzz031-08056/CoreFP.pkg>",
     "PKLeopardPackage <file://localhost/Library/Updates/zzzz031-08056/CoreADI.pkg>",
     "PKLeopardPackage <file://localhost/Library/Updates/zzzz031-08056/MobileDevice.pkg>"
Dec 17 11:48:00 Mihirs-MacBook-Pro installd[760]: PackageKit: Will do receipt-based obsoleting for package identifier com.apple.pkg.iTunesX (prefix path=/)
Dec 17 11:48:01 Mihirs-MacBook-Pro installd[760]: PackageKit: Will do receipt-based obsoleting for package identifier com.apple.pkg.iTunesAccess (prefix path=/)
Dec 17 11:48:01 Mihirs-MacBook-Pro installd[760]: PackageKit: Will do receipt-based obsoleting for package identifier com.apple.pkg.CoreFP (prefix path=/)
Dec 17 11:48:01 Mihirs-MacBook-Pro installd[760]: PackageKit: Will do receipt-based obsoleting for package identifier com.apple.pkg.CoreADI (prefix path=/)
Dec 17 11:48:01 Mihirs-MacBook-Pro installd[760]: PackageKit: Will do receipt-based obsoleting for package identifier com.apple.pkg.MobileDevice (prefix path=/)
Dec 17 11:48:05 Mihirs-MacBook-Pro installd[760]: PackageKit: Extracting file://localhost/Library/Updates/zzzz031-08056/iTunesX.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Dec 17 11:48:25 Mihirs-MacBook-Pro installd[760]: PackageKit: Extracting file://localhost/Library/Updates/zzzz031-08056/iTunesAccess.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Dec 17 11:48:25 Mihirs-MacBook-Pro installd[760]: PackageKit: Extracting file://localhost/Library/Updates/zzzz031-08056/CoreFP.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Dec 17 11:48:28 Mihirs-MacBook-Pro installd[760]: PackageKit: Extracting file://localhost/Library/Updates/zzzz031-08056/CoreADI.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Dec 17 11:48:29 Mihirs-MacBook-Pro installd[760]: PackageKit: Extracting file://localhost/Library/Updates/zzzz031-08056/MobileDevice.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Dec 17 11:48:30 Mihirs-MacBook-Pro installd[760]: PackageKit: update_dyld_shared_cache -overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Dec 17 11:49:16 Mihirs-MacBook-Pro installd[760]: PackageKit: xpchelper --rebuild-cache --overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Dec 17 11:49:26 Mihirs-MacBook-Pro installd[760]: PackageKit: Executing script "preinstall" in /private/tmp/PKInstallSandbox.3wcfFc/Scripts/com.apple.pkg.iTunesX.ClCbhl
Dec 17 11:49:37 Mihirs-MacBook-Pro installd[760]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “iTunesX.pkg”." UserInfo=0x7f9a026b5130 {NSFilePath=preinstall, NSURL=file://localhost/Library/Updates/zzzz031-08056/iTunesX.pkg, PKInstallPackageIdentifier=com.apple.pkg.iTunesX, NSLocalizedDescription=An error occurred while running scripts from the package “iTunesX.pkg”.} {
     NSFilePath = preinstall;
     NSLocalizedDescription = "An error occurred while running scripts from the package \U201ciTunesX.pkg\U201d.";
     NSURL = "file://localhost/Library/Updates/zzzz031-08056/iTunesX.pkg";
     PKInstallPackageIdentifier = "com.apple.pkg.iTunesX";
Dec 17 11:49:38 Mihirs-MacBook-Pro Software Update[764]: Releasing Lock: 501, 754, 0
Dec 17 11:49:38 Mihirs-MacBook-Pro Software Update[754]: Error: An error occurred while running scripts from the package “iTunesX.pkg”. (PKInstallErrorDomain code 112)
I also tried suggestions provided in other forum: Troubleshooting iTunes installation on Mac OS X - Apple Support
I downloaded dmg file from thelink provided and followed the steps. It still gives an error.
Error as below:
The installation failed.
The install encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Please help.
Please help to get iTunes install.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

When installing One Drive Application on windows xp sp 3 gives following error

when you try to install OneDrive Application on Windows xp sp 3 it gives following error,
OneDriveSetup.exe is not a valid Win32 application
plz try to help me remove this error.
Tx.<mytubeelement data="{"bundle":{"label_delimitor":":","percentage":"%","smart_buffer":"Smart Buffer","start_playing_when_buffered":"Start playing when buffered","sound":"Sound","desktop_notification":"Desktop
Notification","continuation_on_next_line":"-","loop":"Loop","only_notify":"Only Notify","estimated_time":"Estimated Time","global_preferences":"Global Preferences","no_notification_supported_on_your_browser":"No
notification style supported on your browser version","video_buffered":"Video Buffered","buffered":"Buffered","hyphen":"-","buffered_message":"The video has been buffered as requested
and is ready to play.","not_supported":"Not Supported","on":"On","off":"Off","click_to_enable_for_this_site":"Click to enable for this site","desktop_notification_denied":"You
have denied permission for desktop notification for this site","notification_status_delimitor":";","error":"Error","adblock_interferance_message":"Adblock (or similar extension) is known to interfere
with SmartVideo. Please add this url to adblock whitelist.","calculating":"Calculating","waiting":"Waiting","will_start_buffering_when_initialized":"Will start buffering when initialized","will_start_playing_when_initialized":"Will
start playing when initialized","completed":"Completed","buffering_stalled":"Buffering is stalled. Will stop.","stopped":"Stopped","hr":"Hr","min":"Min","sec":"Sec","any_moment":"Any
Moment","popup_donate_to":"Donate to","extension_id":null},"prefs":{"desktopNotification":true,"soundNotification":true,"logLevel":0,"enable":true,"loop":false,"hidePopup":false,"autoPlay":false,"autoBuffer":false,"autoPlayOnBuffer":false,"autoPlayOnBufferPercentage":42,"autoPlayOnSmartBuffer":true,"quality":"default","fshd":false,"onlyNotification":false,"enableFullScreen":true,"saveBandwidth":false,"hideAnnotations":false,"turnOffPagedBuffering":false}}"
event="preferencesUpdated" id="myTubeRelayElementToPage"></mytubeelement><mytubeelement data="{"loadBundle":true}" event="relayPrefs" id="myTubeRelayElementToTab"></mytubeelement>

Seems you are installing a 64-bit application on a 32-bit machine. Try installing a 32-bit setup for Onedrive on your machine..

Compression of 2lis_03_BX data gives CX_SQL_EXCEPTION error

Similar Messages

Maybe you are looking for