Compression options changed without any warning.

Recently I went to export my latest artistry using quicktime conversion only to discover that the export options have completely changed without me ever doing anything to make them change. Now the Sorenson 3 scheme is missing from the menu and I have no clue why. It's a terrible thing since all of my Vj clips are in this format.
What do I do? How do I get it back? GRR! These are the types off things that make me wish I had become a farmer instead of a video producer.

Hmmmm. It is off. as far as I can tell. Looking at the software update window from the System Preferences menu. The check for updates is not selected. Yet I often get little windows prompting me to download updates. I always say no but my partenr always says yes. Is there some other hidden control panel for this option?

Similar Messages

  • Safari has changed without any warning.

    I was using Safari and I noticed a few things:
    -In my bookmarks bar, Google Maps was removed. I never bookmarked anything or removed anything from that bar.
    -There's no option to empty my cache anymore.
    -I'm now asked if I want to save passwords.
    Can anyone explain what's happened?

    Safari 6
    Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
    Passwords
    Safari > Preferences > AutoFill
    Uncheck the box for "Usernames and passwords".
    Google Maps.
    It is in Bookmarks Bar > Misc.
    Apple removed some features and moved some around.
    Best.

  • Turn off suddenly without any warning when plugin Adapter(Charger)

    My Pavillion dv6-3208tx turn off suddenly without any warning when plugin Adapter(Charger) and it won't start unless i unpluged the adapter. I can run on battery. Pliz help...!

    Make sure the keyboard is seated properly.
    (Instructions can be downloaded here.)
    Sometimes, plugging in the adapter when the keyboard is improperly seated can cause this behavior.

  • I have big problem with battery, It's not working good just two hours and stop without any warning when the battery in 50% then reach 30% in the same moment, then the iphone stopped,what I can do for that and I live in Egypt???any help

    My Iphone 4 is very good until last Thursday, I used it from sep 2011 without any problems, My problem is the battery is down without any warning and working after 100% then 82% then 50% then 30% and down these things throw less than two hours
    what can I do with that??
    Also, I live in Cairo,Egypt
    waiting your recommendations

    Hi,
    "But it didn't work it's just turning them to black gray scale colors not what i was thinking about."
    If you want it to be colored, you'll need to create a color-palette for the 8bppIndexed bitmaps. The keyword for this process is "Color-Quantization".
    The whole yellow-green pie you get is from the wrong format. If you convert the 32bpp bitmaps to 24 bpp bitmaps, you loose the alpha channel ("transparency"). You can manually set one color to "transparent" with the mMakeTransparent-method
    of the Bitmap class, or simply use gif-images (they are 8bpp with a transparent "key"-color)
    Regards,
      Thorsten

  • SQL developer starts and then disappears without any warning

    Hi, guys:
    I need to use SQL developer where there are existing connections. however, SQL developer 3.1 asked the java.exe location, and I chose java 6, now I can launch SQL developer but not able to continue running it. SQL developer starts and then disappears without any warning. Could anyone help me on this problem?
    Thanks a lot!
    Sam

    Can you start the exe from the BIN subdirectory? That should open a command console, and maybe you can see any error messages there that explain what's happening. For step-by-step directions, here's some help:
    http://www.thatjeffsmith.com/archive/2012/06/how-to-collect-debug-info-for-oracle-sql-developer/
    OR
    Install SQL Developer to a new directory and run it from there and see if that helps you get around your current install's issue.

  • Laptop shuts down without any warning

    My laptop is shutting down without any warning. It has done so twice. When I run the preboot diagnostic, everything is fine. When I run Dell Support Assist app, this is the error message that I got from the System History:
    Application Error
    Fault bucket 86066676302, type 4
    Event Name: APPCRASH
    Response: Not available
    Cab ld: 0
    Problem signature:
    Pl: DllHost.exe
    P2: 6.3.9600.17415
    P3: 54504134
    P4: StackHash_216b
    P5: 6.3.9600.17736
    P6: 55014336
    P7: c0000374
    P8: PCH_CF FROM_ntdll+0x000000000009177A
    P9:
    P10:
    Attached files:
    C:\Users\Raymond\AppData\Local\Temp\WER6C2E.tmp.WERInternalMetadata.xml
    These files may be available here:
    C:\Users\Raymond\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_OUHost.exe_fcb15f1d8bcda961763f8dc9a8f899f8621977b_30a79b3d_14cf863e
    Analysis symbol:
    Rechecking for solution: 0
    Report 10: toala596-eca4-11e4-bfac-08edb9244ef6
    Report Status: 0
    Hashed bucket: 7b43e3b419dd3feaa74b55be5e190271
    These files may be available here:
    C: \Users\Raymond\AppOata \Local\Microsoft\ Windows\ WER\ReportArchive
    \AppCrash_OUHost.exe_fcb15f1d8bcda961763f8dc9a8f899f8621977b_30a79b3d_l4cf863e

    Hi ,
    Thank you for writing to the Dell Community Forum.I am Jennifer and I work for the Dell Social Media Team .
    To assist me to resolve this issue I would suggest you to try these steps and advise the result ,
    *)Is this issue seen with all applications and any particular applications.
    *)When the system crashed did you experience any over heating issue.
    *)May I know the operating system installed on the system .
    *)Would suggest you to work on this system in safe mode with networking then test if the same issue is seen .
    *)Also as you mentioned that with the preboot diagnostic the system passed all the test so  the system's hardware is working fine.
    If there are any more queries do reply to this post with the system model ,operating system installed on the machine, service tag of the system(sent via private message) so that I can look into the details of the system and assist you better .
    Awaiting a reply from you .
    Kindest Regards,

  • PSE 9 reboots my machine without any warning message..

    I am using Photoshop elements 9. i brought it recently. And the installation went
    well.. but when i am using the software, my machine reboots without any warning message.
    My System Configuration:  INtel Pentium 2.19GH,  80GB Hard Disk and 2GB RAM. and operating system is XP.
    Please help me in this regard.. what needs to be done...???

    Hi,
    Since nobody else is coming up with ideas for your problem, I'll let you know my thoughts.
    As the system is suddenly rebooting, I tend to feel you might have a hardware problem. PSE 9 does use a lot of resource when it is working and could be causing the hardware to fail.
    Just a few questions first:
    1) how much free space on your disk drive?
    2) does the system reboot when using any other software?
    I have seen similar failures caused by overheating - sometimes a fan fails and needs replacing. Other causes could be a problem with the power supply unit - the extra processing load can sometimes cause the voltages to drop.
    Since you said about the screen becomes blurry sometimes, it could be that there is a problem with the graphics card.
    I'm not being rude, but how well are you with computers? If I were to ask you to check the event viewer, would you know what to do or would I have to give detailed instructions?
    Brian

  • Macbook Shuts downs without any warning.

    Hi All,
    Recently I have noticed that my Macbook shuts down without any warning when the battery is out of power. Previously i used to get a warning when about 9-10 mins of power was left.
    I have all the updates installed. Also I have not installed any new hardware.
    Is there any settings in the System Preferences. What should I do to correct this situation.
    Best,
    Siva
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 4600
    Remaining Capacity (mAh): 3580
    Amperage (mA): 1542
    Voltage (mV): 12220
    Cycle Count: 113

    I'd try a SMC reset - that usually clears battery/power related settings and might do the trick.
    Blackbook C2D   Mac OS X (10.4.9)   120Gig, 1Gig, Superdrive.

  • When dragging an iPhoto event to iDVD, the order in which the pictures appear changes without any apparent rhyme or reason.  Any ideas on how to prevent that from happening?

    When importing an iPhoto event into iDVD (iLife '11 versions of both) by dragging it from iPhoto to iDVD, the sequence of the photos is far different in the iDVD project than in the iPhoto event, without any apparent rhyme or reason for the change.  Any way to avoid having to resort all the photos in iDVD?

    Create an album from that Event and sort the photos the way you want.  Then drag that album icon from the Media Browser in iDVD into the slideshow area.  They will import in the order that's in the album.
    OT

  • Macbook shutdown without any warning after 40%, when run on battery.

    Hello,
    My Macbook when run on battery after 40% shuts off without a warning. Is there a way to avoid it? Is there a setting in the battery preferences where I can change to avoid shut down?
    Battery Information:
    Model Information:
    Serial Number: DP-ASMB016-370e-4db1
    Manufacturer: DP
    Device name: ASMB016
    Pack Lot Code: 0002
    PCB Lot Code: 0000
    Firmware Version: 102a
    Hardware Revision: 0500
    Cell Revision: 0200
    Charge Information:
    Charge remaining (mAh): 2496
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 4276
    Health Information:
    Cycle count: 142
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): 1488
    Voltage (mV): 12281
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 60
    Disk Sleep Timer (Minutes): 180
    Display Sleep Timer (Minutes): 45
    Automatic Restart On Power Loss: Yes
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 60
    Disk Sleep Timer (Minutes): 180
    Display Sleep Timer (Minutes): 45
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    Charging: Yes
    If you can suggest me with the above problem will be of great help. Thank you in advance.

    Same issues here:
    - When powering the MB on the battery, the MB can go off suddenly without warning, usually at about 20% but, since it started about 2 months ago, it occurred also at 7%, between 30 and 40% and even 70% once… It occurs every time when on batteries. And every time, if I start the computer again, it will shut down suddenly without warning after a few seconds/minutes. When back on mains, it can be powered on normally. It does not go to sleep, it's a complete and sudden power off without warning.
    - The battery at about 173 cycles sees its capacity dwindling way too much (it's been dwindling since day one, but it's going down faster and faster, the graph since November 2007 in MiniBatteryLogger is edificatory). The capacity right now is between 2900 and 3460 depending of the feel of the day. It's been calibrated regularly since day one in July 2007. Note that the capacity dwindled from its original capacity but never went higher than this value even if along the way it recovered sometimes more capacity.
    I have tried all the tricks from calibrating a little bit more often, reseted the SMC, even a complete system reinstall (that I wanted to do anyway as I had to get rid of the evil spotlight bug). All this to no avail.
    So what? :-/
    Model Information:
    Serial Number: DP-ASMB013-3629-1bbc
    Manufacturer: DP
    Device name: ASMB013
    Pack Lot Code: 0001
    PCB Lot Code: 0000
    Firmware Version: 0102
    Hardware Revision: 0300
    Cell Revision: 0200
    Charge Information:
    Charge remaining (mAh): 3320
    Fully charged: Yes
    Charging: No
    Full charge capacity (mAh): 3412
    Health Information:
    Cycle count: 173
    Condition: Check Battery
    Battery Installed: Yes
    Amperage (mA): -1
    Voltage (mV): 12411
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 0
    Display Sleep Timer (Minutes): 5
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 5
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 1
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    Charging: No

  • PWG4 12 inches turn off without any warning still 47% bat

    Hi
    Is anyone have this problem before, whithout any warning my PBG4 12I turn off even if is still have power in battery 40 to 50%, The only way to turn it on is to plug it and it came alive again.
    By the way i dont remember wher to set the warning time % of battery,i check in pref sys pwr energy on battery mode see nothing.
    Thanks for help

    This is the sign of a lithium battery almost on it's last legs, and it's not an unusual indicator. You can charge it up, and somewhere below 50%, it will just go to zero, shutting the computer down. It happens so quickly you don't get a warning. IF the battery stats are still good, you probably have a fair number of cycles on the battery.
    Time for a new battery. Recommend either an OWC battery, which has gotten good reviews here, and can be seen at http://eshop.macsales.com/shop/powerbook/battery/g4-12inch-aluminum/ or an Apple battery, although the comments on the Apple web site are not very positive.

  • SC created without any warning or error message

    Hi,
    I'm working with SRM 5.0, classic scenario.
    Problem is following:
    I create a SC for a specific material for storage location A for example. But this specific material wasn't created for storage location A. SRM doesn't block my SC cart created neither give me any warning or error message.
    After SC goes into error into shoppingcart monitor indicating that this specific material wasn't created for storage location A.
    Is this normal SRM behaviour? I don't think so...
    Can I activate any warning or error message in order to avoid this?
    Thanks a lot,
    regards,
    caroline

    Hi
    This seems to be normal behaviour.
    Please check for errors, dumps etc. using BBP_MON_SC, RZ20, and ST22 Transactions, if any.
    You need to use BBP_DOC_CHECK_BADI for issuing Warning / Error messages.
    Implement BBP_DOC_CHECK_BADI for filter type - BUS2121 (Shopping carts) and get the job done.
    P.S. Carefully read the Standard SAP Documentation of this BADI using SE18 Transaction.
    Hope this will help. Do let me know.
    Regards
    - Atul

  • Labview crashes without any warning or error messages

    Hi,
    I have been using Labview programs for the last 2 months without any problem. All of a sudden the program has started crashing while running. There are no error messages on the screen. The program runs for long hours and during my intermediate inspections i find that Labview has closed without any sign on the computer. This has happened about 2-3 times in the last week but before this there was no such problem. Also this problem is not specific to one program alone. There are other independent modules that have faced the same situation. No two programs are run simultaneously, and the programs use only serial (one of the program also uses parallel) communications with connected devices.
    Any suggestions to troub
    leshoot / diagnose the problem will be highly appreciated,
    Thanks
    Gyro

    Thanks for your comments. I can use the vi as a sub vi. The error/crash occurs randomly (anywhere from a before running the program to about 8hrs after starting it). Improtantly i have used this program for about 15 times without any problem. The same error is also occuring for other programs. And all of these errors have started occuring in the recent past 3-4 days. Any clues as to what might have triggered this?

  • Help, direct debit options changed without my cons...

    help,   Any ideas how to get through to some in BT security time in UK ?   Recieved an email to say  "Thanking me for setting up a direct debit and that you are taking £xxxx from my account in  8days !" As I already have a debit debit for many years with you have not authorised you to take this payment I'm a little alarmed"   BT call centre have advised me that I have requested " Whole Bill Direct Debit", but I haven't. They then advised someone in my family has, but that is not possible as it's only me. I have asked if my account has been hacked but they just say  I requested this change.   My direct debit has been changed from a fixed payment to "Whole Bill Direct Debit".    I am quite alarmed, the call centre do not understand or ignorning what I am saying. Has my account been hacked or is this an error on BT's part ?            

    It's very unlikely that anybody would bother to hack into your account just to change the way you pay your bills.  They would have nothing to gain by doing so.
    Much more likely, it's some misunderstanding.  Have you changed anything about your account recently that may have prompted BT to change your billing?  BT have a nasty habit of combining changes to one service with changing something else that's apparently unrelated.
    If it's really necessary, you can always cancel the direct debit with your bank.  But that will leave the bill unpaid, so that could just cause more problems than it solves.  Better to contact BT, and be more insistant that they tell you who made the changes, when they did it and why.
    I don't suppose it's any help to you, but many of us on this forum much prefer Whole Bill Direct Debit anyway.  You just pay what you owe every month, rather than paying some arbitrary figure that BT plucked out of thin air.

  • Even after enabling "Warn me when closing multiple tabs", firefox closes without any warning even if multiple tabs are open.

    I recently installed Firefox 4.0 and in the options, under the section "Tabs", I have enabled "Warn me when closing multiple tabs". But if I have multiple tabs opened with websites loaded in them, and then try to close the browser, it simply closes. No warnings are shown (which was there in previous versions). Couple of times I clicked on the close button of browser and then realized that I had some important sites opened in different tabs, which I lost as it didn't warn me. Can you please let me know whether this is a bug or a mistake from my side?

    I'm sure you are using Private Browsing mode in Firefox 4. I have also the same problem and I tried to uncheck this option after many times accessing about:config\browser.warnOnquit. And it's wonderful, the warning cameback. I think it's a bug about Private Browsing mode. Hope Mozilla's Developers will fix it.

Maybe you are looking for