Compression possible with Tcube?

Hello BPS Experts,
There is no partioning by request in Tcube. please correct me if i am wrong. then how can we do the compression of tcubes ? i think i am missing some thing.
please suggest.
Thanks
BWer

Hello BWer,
compression does not depend on partitioning. Requests on transactional InfoCubes will be closed after 50,000 records. After that it's highly recommended to compress the requests.
Regards,
Marc
SAP NetWeaver RIG

Similar Messages

Non-cumulative initialization is not possible with historical data

Hi all,
While loading inventory cube.. 0IC_C03 .. after loading 2LIS_03_BX request get sucessful. while compress that request No Marker update. i getting following error msg.
<b>Non-cumulative initialization is not possible with historical data</b>
Regards
siva.

You sure you didn't use BF instead of BX? This messge indicates that you have historical data in your cube whereas BX only loads a fixed state at a specific point in time... Or maybe, did you initialize BX twice in R/3 without deleting the previous init, I don't know if that could cause that error but it's another possibility.

Has anyone had any luck compressing videos with resolutions higher than 1080?

Everytime I try, it fails instantly. Is this not allowed in Compressor 4? It was possible in Compressor 3.

I have a 4K video that I'd like to compress using H.264 or X.264 and restrict the data rate.
Here are some details of the video (created in Motion) I am trying to compress:
DIMENSIONS: 4096 x 2048
FORMAT: H.264
FPS: 24
DATA SIZE: 53.2 MB
DATA RATE: 52.03 MB
and here are settings that I would like to compress it with using Compressor 4.0.4:
CODEC: H.264 or X.264 (both fail)
FRAME RATE: current
KEY FRAMES: Automatic
DATA RATE: Restricted to 7000 kbits/sec (setting it to automatic or any other data rate also fails)
QUALITY: Best
HEIGHT AND WIDTH: 100% of source
I have been able to get a successful compression with this 4K video file using ProRes 422, so that leads me to think this is a codec problem, not a Compressor application problem. Furthermore, I have had the same problem just using Quicktime 7 to export a video with these settings, I get the same failed results.
In Compressor it gives me the message Failed: Quicktime Error: -108
and in Quicktime 7 it gives me the message Failed: qKitErrorCatchAll (-6662)
So, if you had any suggestions about a better codec to use, one that allows me to restrict the data rate on higher than 1080 video files, it would be much appreciated.
Thanks
Evan

I want to copy images to a memory stick for sharing with my family. This was possible in iPhoto via copy/paste but does NOT seem to be possible with photos...

I want to copy images to a memory stick for sharing with my family. This was possible in iPhoto via copy/paste but does NOT seem to be possible with photos...

You can drag and drop (this will result in a compressed JPG) or hold the alt key and drag and drop (this will copy the original). You can also select the pictures and choose Export from the File menu.

After Compressing file with Compressor when somthing move in the picture

After Compressing file with Compressor when somthing move in the picture , it will get a kinda interlaced in the edges of it , the orginal files was Uncompressed DV and I add subtitle on it and then used the 90 min best dvd preset for it .
I really need some help .
thanks a lot .

I would take a step back here before going further. William's suggestion might very well clean up the library but something obviously did not go right and to start mucking about in the library might make things worst.
For starters I'm surprised to see the folder structure you showed in your first post. Aperture stores managed masters (originals) by import date and time. The structure (in all libraries I've ever seen) looks like:
So something seems wrong with your master folder.
Also the three folders you showed the first and third are identical ( the middle one has the (1) added to which is how the OS handles duplicates in a folder) so this shouldn't even be possible, those folders should not be there.
I'm wondering if this is something left over from your using Duplicate Annihlator. Do you have a copy of the library before you ran the merge and used DA on it? Would be interested to see what the master folder looks like.
Finally when you ran the merge which library did you tell Aperture to use as the master, the one that was used to resolve conflicts?
Again William's suggestion might be all you need to do but it would be good to figure out want went wrong before proceeding.
regards
Message was edited by: Frank Caggiano - A better first step might be to run the Aperture first aid tools, repairing and possibly rebuilding the library.

Problems with compressing files with right hand click. it does not work.

Problems with compressing files with right hand click.
I am using the compress function in the Mac OS (File > Compress XX) from time to time. Today it does not work anymore. OS 10.5.6
I get a message: The content list cannot be created for compressing.
I tried it with files and folders and keep getting this message. Anybody any idea as to how to fix this

Thanks I love my macbook!!!!
I also got further problems such as copy-paste not working etc.
so I fixed it just this morning by running Applejack 1.5 and am back up running noticing your post.
thanks for helping though!

I am getting old and looking forward to use I Pad as a Phone if possible through WIFI! I this possible? The screen is to small for me! If possible, with new I Watch taking calls, other uses through I Pad!

Like I wrote on title, I am getting old and it is not easy to see E-mails, news etc. on a I phone! New I phone will not help me for the size.
If possible, everything without calls, I would like to use I Pad as direct unit, and for calls through I Pad over WIFI all calls. If a call as Skype, I would like
to use the I Pad as a monitor. Is this possible?
I found on a side that there is a product for people for better hearing, which can be put into the ears, using WIFI with I Phone.
If this product could be used also for I Pad as a Phone for hearing, and the I watch or I Pad as Microphone, it will be great for old Mac users.
Is this possible with our system know?
I am using Mac since Classic II! Would like to continue with the newest items with the possibility for old person with bad Eyes or Ears.
Looking forward for a kind answer
with regards
Christian an old Mac user!

Definitely No

When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
You may have some problems because Apple has not certified that everything works with Windows 8 yet.

Multiple usage of Source System is not possible with installed DMIS version on source

Hello folks!
I`ve got a problem trying to adjust the Data Replication to SAP BW (on HANA) using SAP LT Replication Server.
I`ve deleted one connection and after that I`m trying to create new one through Configuration & Monitoring Dashboard (transaction LTR) with the same source / target systems.
As result when on the second step (Specify Source System) I specify RFC destination of the source system it appears an error with text
"Multiple usage of Source System is not possible with installed DMIS version on source".
But there`s no any adjusted connection in system now..
Please, help me to understand how to fix that problem, I can`t find a solution

Hi,
When you say that you 'deleted one connection', did you delete the RFC connection or the SLT Configuration? If it is not a real multiple usage scenario, then deactivate the 'allow multiple usage' flag, else install the correct DMIS version on both SLT and source.
Thanks
kris

What driver or software patches do i need to install in my windows 7 laptop, in order for the laptop to capture Bluetooth messages, which is possible with window 8?

Hi,
i am connecting a Bluetooth device to my laptop. I notice that Message Analyzer could capture Bluetooth messages only if I am using windows 8? I am using window 7. What driver or software patches do i need to install in my windows 7 laptop, in order for
the laptop to capture Bluetooth messages, which is possible with window 8?
Also, i notice that using window 8, i am able to capture Bluetooth message but i am not able to display wireless perfromance statistics such as signal strength, throughput, etc? Is there a way for me to get such information.
Please help.

If you look at the link you sent me:Default Trace Scenarios
http://msdn.microsoft.com/en-us/library/jj659262.aspx
"Windows 8 Bluetooth (Windows 8/Windows Server 2012 or later)
Troubleshoot Bluetooth issues"
So what about Windows 8 earlier? Not supported?
My question: What driver or software patches do i need to install in my windows 7 laptop, in order for the laptop to capture Bluetooth messages, which is possible with window 8?

Using BlackMagic Intensity Pro Video Compression card with FCP in a MacPro

BlackMagic is offering the Intensity Pro card that they claim is enhancing the quality of video compression for better results than software driven compression, even with Standard DV in addition to HDV, and at a surprisingly cheap cost (less than $300).
http://www.h-digital.com.au/hardware/hardwareview.asp?id=152
As someone used such hardware driven compression card in a MacPro ?
Does-it really help making better quality DVDs?
If not are there better hardware driven compression card?

7-8 years ago, we said that analog video was at the low end and DV was at the high end.
Uh, DV was NEVER on the high end. Digibeta and Beta were analog, and were HIGHER end than DV. Just because it was digital doesn't mean it was better. DV is compressed 5:1 and has 4:1:1 color sampling. Beta was 4:2:2 and better than DV...and Digibeta was and still is the high end SD format. DVCPRO 50 a close second. No...DV came in on the low end...like HDV comes in on the low end of the HD spectrum.
If this Intensity card does not help to get better compression than software driven compression, is there another card which can do so ?
Well, I answered this, but you must have missed my answer, so I will bold it for you: *THERE IS NO CARD OUT THERE FOR THE MAC THAT WILL AID IN DVD COMPRESSION.* I don't know about the PC side, so I make the statement to include MAC only. There are several hardware solutions for encoding DVDs that distributors use when making the theatrical DVDs like OCEANS 13...but those are separate hardware encoders. And no, again, those encoders are not available on a Mac.
What I mean at the end is to find ways to have higher quality DVDs than when using software such as Compressor. Do you follow me ?
I follow you....you aren't following me. Since I am an editor and not a distributor, I don't know what those solutions are. They exist outside of the editing world, so you have to GOOGLE this or look elsewhere. Needless to say, the Intensity does not aid in this. No capture card does. That is not what they are designed for. They are designed to capture non-firewire formats and to output to non-firewire formats...not to aid in DVD compression.
Shane

F-90 TAX (Posting is only possible with a zero balance;correct document )

WHEN I AM POSITNG THE DOCUMENT THROUGH F-90 I AM GETTING THE FOLLOWING ERROR
ERROR:Posting is only possible with a zero balance; correct document
    Message no. F5060
ACTUALY I HAVE SLECTED VENDOR 31 ASSET 70 WITH TAX CODE AFTER SIMULATING THE DOCUMENT
THE FOLLOWING ENTYR IS COMING BUT WITH GREEN ERROR AS I HAVE MENTIONED ABOVE
ENTRY VIEW AFTER SIMULATING IS AS FOLLOWS
   PK BusA Acct                               INR   Amount        Tax amnt
001 31       0000700000 One time Vendor for        75,000.00-
002 70       0020001031 000040010498 0000          75,000.00                 H1
Other line items                3,000.00
D 75,000.00           C 75,000.00                   3,000.00 *    2 Line items
ACTUALLY I HAV SEELECTED CALCULATE TAXES ON NET AMOUNT IN FB00.AT THE TIME ENTRY IS POSTING AS FOLLOWS
31 VENDOR 75000
70 ASSET 72200
40 VAT     2800
BUT THE ABOVE ERNTRY IS WRONG
CORRECT ENTRY IS AS FOLLOWS
31 VENDOR 78000
70 ASSET 75000
40 VAT     3000
ACTUALY CALCUCULATION IS ON NET AMOUNTS.IS I DESELECT IN FB00 PROBLEM WIL SOLVE AND REFLECTING WITH GROSS AMOUNTS IN ASSET
BUT TAX IS NOT CALULATING IN CUSTOMER INVOICE
Regards
sumathi
Edited by: sumathi lakshmi on Jan 9, 2009 8:24 AM

I HAVE BEEN TRYING THE SAME CAN ANYONE HELP AS I AM NEW TO THIS SYSTEM?
F5060
Posting is only possible with a zero balance; correct document?
I HAVE BEEN TRYING BOTH VENDAR AND CUSTOMER WITH INPUT TAX AND OUTPUT TAX BOTH ARE SAME ERROR. IS THERE ANYTHING IN SETTINGS I NEED TO RECTIFY?

Posting is only possible with a zero balance; correct document

Hello SAP gurus,
Please help me here. I tried to post a vendor invoice but i got an error message "Posting is only possible with a zero balance; correct document".
The debit and credit balance is correct. In document entry i checked calculate tax and the GL master was assigned a tax code. How can i correct the document and be able to post the invoice?
Thanks in advance,
Prakash

Hi,
I had also faced same issue and got it resolved.
For resolving it, I made necessary changes in Editing Options in transaction FB01.
These Editing options are user specific settings and these can be found in transaction FB01 -
Go to Settings --> Editing Options (F9).
Alternatively, you can click Editing Option Button on FB01 Screen (Call Up Editing options for Accounting).
Please check if it resolves your issue.
Best Regards,
Rajinder Sharma

Batch: Open Bridge 'Stacks' as layers in PS CS5 + run action. Is this possible with script??

I posted this topic a couple of days ago - I didn't know about this forum/group so the thread appears in Photoshop Scripting and Bridge Windows. I haven't found a solution on those forums - can any one here help?
http://forums.adobe.com/thread/880777?tstart=0
http://forums.adobe.com/thread/880779?tstart=0
I would like to automate part of my workflow that involves opening stacked images (in Bridge CS5) as layers in Ps CS5 and running an PS action that composites the layers and processes the image. Something similar to 'Process Collection' in Bridge CS5 only with my own action instead of merge to HDR/Panorama.
Apparently this is possible with Mac 'Automator' - is there anything I can do in Windows? I don't have any experience with writing scripts, but have friends that can help. Can someone tell me if its possible and point me in the right direction please?
This needs to be a batch process. I know how to open images as layers from Bridge so that I can manually run the PS action - I would like to automatically process lots of images in this same way.
To clarify, the script if possible will need to
1) find first stack (in Bridge [in selected folder])
2) open as layers in PS
3) run PS action
4) save and close (as psd preserving layers)
5) find next stack in Bridge (selected folder) and repeat.
By 'stack' I mean a set of similar files (for instance same scene -2EV, 0EV, +2EV)
Bridge's 'Process Collection' feature is great because it very cleverly recognises similar images (I think you have to stack them first) opens them and either processes them into a hdr or panoramic image. Instead or hdr or pano, wouldn't it be great if you could run your own action.
Bridge's Image Processor is fantastic at opening a batch of individual files and running your own processing action, but it won't open groups of images ('Stacks' or sets) as layers.
What I need is basically a hybrid of the two.

In case you miss my late append in the other thread you may want to look at the auto collection script that ships with the Bridge and use it as a base for what you want to do. You may also be able to automat the creation of your stacks if their time stamps are close. The Auto Collection Script night now does two types of stacks HDR and Panoramas. You may be able to modify it to do a third stack type. You stack type and use your stack processing process instead of mearge to HDR or PhotoMerge.
From Bridge help:
The Auto Collection CS5 script in Adobe Bridge assembles sets of images into stacks for processing as high dynamic range (HDR) or panoramic composites in Photoshop CS5. The script collects images into stacks based on capture time, exposure settings, and image alignment. Timestamps must be within 18 seconds for the Auto Collection script to process the photos. If exposure settings vary across the photos and content overlaps by more than 80%, the script interprets the photos as an HDR set. If exposure is constant and content overlaps by less than 80%, the script interprets the photos as being part of a panorama.
Note: You must have Adobe Bridge with Photoshop CS5 for Auto Collection CS5 to be available.
To enable the Auto Collection CS5 script, choose Edit > Preferences (Windows) or Adobe Bridge CS5.1 > Preferences (Mac OS).
In the Startup Scripts panel, select Auto Collection CS5, and then click OK.
Select a folder with the HDR or panoramic shots, and choose Stacks > Auto-Stack Panorama/HDR.
Choose Tools > Photoshop > Process Collections In Photoshop to automatically merge them and see the result in Adobe Bridge.

Is synchronous scenario possible with JDBC & JMS adapter?

Suppose,JDBC adapter is updating a table or deleting some entry from a table.Can we have an acknowledgement back that the work has been done successfully??
same qstn for JMS adapter also..
Suppose JMS adptr is communicating with any messaging system,can we have acknowledgement back?

Jms Adapter supports Asynchronous scenarios only but If u want to use Synchronous then possible with Standard module beans :
For ex: JMS to Rfc synchronous scenario:
In id:
Sender jms adapter supports Asynchronous scenarios so we have to use standard module beans in Module tab.
Like :
AF_Modules/RequestResponseBean -> 0
CallSapAdapter
AF_Modules/ResponseOnewayBean -> 1
And Provide values in configuration:
0 -> passThrough -> true
1 -> receiverChannel ->provide RECEIVER JMS adapter name ( have to create one more JMS receiver communication channel for responce )
1 -> receiverService ->provide receiver adapter service name (that is provide sender business component because need response for sender )
jdbc adapter :
http://www.****************/Tutorials/XI/SOAP2JDBC/Page1.htm

Compression possible with Tcube?

Similar Messages

Maybe you are looking for