Compression Rate, does Photoshop count it out for me while saving for web?

Just as the title says. Is it possible to see the compression rate of your image?
Thanks!

If you are think something similar to how zip or 7 shows the compression while it is working, no it does not.

Similar Messages

  • How can I get PS CC to always load my preferred Preset while saving for web output?

    For my purposes, I'd prefer to save all JPEGs at 100% quality while saving for web output. I've made a preset as seen below.
    However, PS doesn't always defer to this setting when I begin saving an image for web. Is there a way to make this preset automatically
    load every time I open the output to web process? I process a large number of images, and if I could avoid correcting this it would save me a lot of time.
    I'm using PS CC on a PC. Any help will be appreciated!

    This is the only custom preset I've made with this particular system. So I'd need to delete the pre-loaded PS presets?
    I'm a little loathe to remove the options in case they might be needed in the future or for a task other than the primary one described.

  • User Exit for ME22N while saving of PO

    Hi all,
    i want a USER EXIT for ME22N while saving. i want EKET data.
    After checking EKET data, i want to chage EKPO data.
    Thanks
    pabi

    Hi,
    Below Exit you can have access to EKET and EKPO data in the tables paramters before the SAVE
    EXIT_SAPMM06E_012
    TEKPO: EKPO data
    TEKET: EKET data
    Enhancement:MM06E005 (Check in SMOD transaction)
    Check for one Paramter: I_TRTYP (This is for Create/Change/Display Modes) or You can check on Sy-Tcode = ME22N
    Hope this helps
    Regards
    Shiva

  • Does Photoshop Touch have a built in raw converter for Canon, Panasonic and Olympus raw cameras?

    Does Photoshop Touch have a built in raw converter that you can use with your Canon, Panasonic and Olympus raw shooting cameras ?

    Thank you for getting back to me on this. Hopefully, raw conversion will be available soon and this fact will be publicized so people won't miss the opportunity.
    Walter

  • Photoshop Elements 12 Editor Shuts Down Without Saving for Web

    Hi
    I have a mac version of Photoshop Elements 12 Editor. I have been using the products for a few months with no problems until recently when I try to save for web (after the preview is shown), the program will shut down by itself when I click the "Save" button.
    Mac version OS X 10.9.5

    Oh, and while you're in there delete:
    com.adobe.PhotoshopElements.plist
    Adobe Photoshop Elements 12 paths
    Adobe Photoshop Elements 12 settings
    There's a saved application states folder at the same level as the Preferences folder. Delete anything in there for PSE.

  • Why does my Mac quit out of InDesign while it's trying to open a file?

    My Mac has decided to keep quitting out of InDesign while it's trying to open InDesign files. The problem started today so I updated InDesign CC to the latest version. But no good. It looks like the file is trying to open up there is an issue with the .idlk file.
    The Mac is pretty new (12 months old) and my colleagues are on similar macs with no problems with the same files.
    Any thoughts?
    Thanks
    Keith
    Here are the error messages

    It's not a signature I recognize, so I can't be definitive, but it appears to be related to text, possibly a bad font or incompatible font manager plugin. Maybe a corrupt style.
    Is it happening with every file you try to open?

  • Error while saving for Objective setting

    Hi,
    While saving the Objective setting templates i am getting the error as "Table HRPAD605 is not part of the Customizing object PDST T "
    <u>Error documentation is as follows</u>
    <b>Diagnosis</b>
    Entries in table HRPAD605 cannot be edited in connection with customizing object PDST      T as table HRPAD605 does not belong to customizing object PDST      T, according to the object definition.
    <b>System Response</b>
    The function terminates.
    <b>Procedure</b>
    Check whether the entered objects and keys are correct.Then check in the Implementation Guide whether the object was created correctly.
    Correct the object definition or the entry for the Transport Organizer interface.
    Thanks

    Hello,
    Most likely the is an inconsistency with the transport objects PDST and PDWS. Please run RHSOBJCH to correct this inconsistency.
    Afterwards you should be able to transport the templates via the catalog or via RHMOVE30. Please make sure that the category ID in the target system is the same otherwise you won't be able to locate the template.
    The report RHSOBJCH corrects the missing HR entries in the OBJS table.
    This step you need to perform only once. For OSA you need to overtake
    *5020 up to *5026, also PAD605,606 and 607 references.
    When you have done this (as said, only need to do it once) you can transport the categories and templates via the phap_catalog_pa transaction (righ-mouse click on the to be transported object).
    Hope this helps,
    Regards and Groetjes,
    Maurice

  • Improper Format error while saving for previous version

    Hi all,
    I have been developing some Daq code with LabView 8.5. Recently I needed to open the vi on a computer which has Labview 8. I used the save for previous version option. I used low-level vi's in my code which are both available to 8.5 and 8 instead of using new express vi's. LV warned me about converting fixed point numbers to double precision while saving, which in my opinion should not cause a problem.
    I have also enabled "Show front panel when called" and "Show front panel when loaded" options from VI Properties dialog (as adviced by previous threads http://forums.ni.com/ni/board/message?board.id=170&thread.id=369331).
    However I was not able to solve the problem. Are there any suggestions to solve my problems?
    Thanks.
    Gokcen

    I dont understand exactly what the problem is.
    Have you used fixed point numbers in your code? and if so does it matter if LabVIEW converts them to DBL? If not then dont worry about it.
    What problem do you have with the 'show front panel when called' as it isnt clear from your message.
    Also, if you can post your problem code as it makes it easier for people to see the problem
    David
    www.controlsoftwaresolutions.com

  • Dreamweaver (CS 6 12.2) freezes while saving for 1 second

    After the last Update Dreamweaver freezes for one second (with blue Spinner) while saving files. I cant do something, until the spinner disappears.
    Why does saving a textfile take so long in the new version?  Is this a bug? If yes: Is it possible to install older versions of Dreamweaver again? I have a CC Subscription.

    Not sure why that would happen. I don't see the same thing here. You could try uninstalling and reinstalling. IIRC, you should get 13.0 again on a fresh install.
    You can also have DWCS6 and DWCC installed at the same time (they just can't be used at the same time) if you are a subscriber. You can follow the instructions here to get it: http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

  • HT204291 I had airplay with my ipad 2 and the apple tv before for a while. For some reason after a sync, i can no longer find the airplay icon on my ipad. Any idea why?

    I had been using airplay on my ipad2 mirror to my apple tv. Worked fine for a while.
    I sync and backed up my ipad yesterday and i could no longer see the airplay icon.
    Anybody know why and the solution please?

    Is your Apple TV "awake"?  Sometimes the AirPlay icon won't show for me if the Apple TV is sleeping - pressing a key on the Apple remote ususally resolves it.

  • User exit or BADI for FB60 while saving data.

    Hi All,
    I want apply check while saving the document in FB60 transaction.
    I want to check for account number and quantity.
    I check some BADI and exits but couldn;t stop while saving the document.
    If anybody has worked on this or have any idea let me know.
    Thanks in advance.
    - Umesh

    1. Try the BTE P/S events mentioend below. These should work for validation. Can be configured in transaction FIBF. You can create your own function module and add the validation.
    <b>00001020</b> POST DOCUMENT:       Prior to Final Checks    
    <b>00001025</b> POST DOCUMENT:       Final Checks Completed   
    <b>00001030</b> POST DOCUMENT:       Posting of Standard Data
    2. You can also used Validation of Accounting documents;
    Transaction: <b>OB28</b>

  • Exit for ME21n while saving

    Hi,
      Let me know if there is any exit while saving ME21n tran.
    Requirement is while while saving the PO,a pop-up information message should be displayed depending on certain purchase organization validation.
    Do let me know.
    Regards,
    SP

    Hi,
    Below is the enhancement: MM06E005 (Check in SMOD) and in that enhancement, there is an customer exit: EXIT_SAPMM06E_012 where in you can perform the validations for the purchasing document.
    Since your requirement is at header data(Purch Org) the same is available in I_EKKO parameter of the customer exit EXIT_SAPMM06E_012.
    Implement this exit and throw an information/error message upon validation
    Hope this helps
    regards
    Shiva

  • Does photoshop have a simple date and time stamp for photos taken?

    I am an enforcement office and require date and time to be printed on my photos. Does this app give me that feature?

    HI Lbheobrown,
    I think this might be too specialized a feature to be something that every Photoshop Touch user would need/want. I went to the app store and just did a search for "timestamp" (no qoutes with the actual search). I did find some apps that read the metadata and can add timestamp info to photos. You might be able to timestamp your photos first with some other app then import the images into PS Touch.
    Some of the apps I saw were
    - StampPhoto - added timestamp and geotagging location info (included a little map of the location on the photo itself)
    - phoTime - has a camera button in the app that adds the timestamp at the bottom as photos are taken
    - Timestamp It! - New and existing photo support, change text color, custom date and time entry support
    You might investigate these further, all were in the $1 app price range
    Hope that helps,
    -Dave

  • When using imessage, does it count against your minutes in your plan for texting or is it totally free?

    when using imessage, dos it count against your minutes in your plan or is it totally free?

    iMessage does not use call minutes or SMS message quota in your plan.  It does use data when when the phone is connected to cellular data.  When you use WiFi, it's completely free.

  • Why does photoshop automatically rename file names when using save for web?

    All of a sudden when choosing Save for Web, when i type in a name for my file in the File Name: dialog box, when you click "save", it saves the selected slices as the name of the document and not what i typed.
    For example: My psd file is called "website header" and i want to save the slices with the name "index". If i save slice-02 or slice-06 it will save as "index_02.jpg" but if i choose slice 01, it will save as "website-header_01"

    Check your settings in the SfW output options and yopur slice names in PS itself.
    Mylenium

Maybe you are looking for

  • Can I have two different iTunes libraries on one computer?

    I have my iTunes library all set up. I just bought my fiancee an iPad. She has no computer nor an iTunes account yet. I wanted to set up her iPad on my computer, but dont want my account put on it. How can I do this?

  • Using user-defined record as a parameter?

    I defined a record and passed it as a parameter to a procedure. How do I declare it in the procedure? The same problem occurs with cursor-defined records: create procedure update as begin declare cursor tbl_csr is select col1, col4 from table_with_15

  • Syncing photo stream

    Why can all of my pics show on photo stream?

  • Can't install Adobe any longer - what to do?

    I had no problem with Adobe Acrobat Reader on a Windows XP system.  Problems began about a day after installing Adobe Air at the prompting of the Avast anti-virus program.  Tried re-installing Reader 11, no luck, it hung up during the installation. 

  • Create new Application on Designer 6.0 with Oracle 8.1.6

    ORA-01403.....i tried placing all the rights but to no avail. i keep getting the error ORA-01403, no data found. It seems that many are having the same problem so i hope that the headstart team can help us on this.