Compressor 2 - Quicktime error 0 revealed

After upgrading to the latest version of QT, FCP5, DVDSP4, and Compressor 2 with all the latest fixes I could not compress a 1 hr 46 min video on my quad G5 without getting the dreaded quicktime 0 error message. I spent days trying to get around this and finally settled on getting the job done through DVDSP, (see my post "compressor 2 what works for me").
I finally decided to track down the problem by spliting my project in half to see which half was failing. Then I spilt that half in two and so on for hours until I found the problem video. Turns out I had a "spin 3D" transition between a slow motion clip at 50% and a clip at regular speed. I added 1 sec of regular speed to the slo mo clip so the transition would fall between to clips at regular speed and the problem was solved. My 1hr 46 min video compressed in 3hrs 30 min. (still not as quick as the 1 hr 10 min from DVDSP4 but thats another story).
Conclusion - "Quicktime error 0" seems to be Compressors way of saying "sorry this is too complex for me." I am sure there are other combinations of transitions, filters, etc. that will cause this problem as well so APPLE, IF YOU ARE READING THIS we need a fix.
I will try more expirements but complexity in the time line seems to be the cause of compressors failure due to quicktime error 0.

I am having the same issue. I have recently purchased quicktime pro and updated to lion, I dont know if that is that causes the failure but this *****! it's the 4rth time i try to compress a 15 minute file, it takes about 3 hours and when there is 10 minutes to go.... pooooof!!! game over!

Similar Messages

  • Compressor quicktime error -50

    i have an fcp project i need to convert to mpeg 4 improved for fast cable streaming. after completing my upgrades of fcp 4.5 and compressor 1.2.1 and fixing the QMaster the file got to the batch monitor. after a second of processing it quit. history says failed: quicktime error-50. any ideas for a fix?

    If I may just chime in here with my experience with QT error -50, this seems to be a bug, which I have reported to the FCP development team. There is also another error that compressors batch monitor also reports which is Quicktime error -6662.
    These error seem to be quite prevalent on the Intel Mac Pros, but on my G5/quad these errors rarely occur. I have tested the same source files on both workstations, (Mac Pro and G5/quad) and the errors are just about exclusive to the intel's. Once in a blue moon I will get a quicktime error -50, preventing the encode to complete on the G5/quad.
    The preliminary opinion of Apple support was that the errors may be related to writing to any drive other than the boot drive, but seems to be a guess at this point, rather than fact. My testing of this hypotheses seems to disprove this assumption, being that I used the boot drive in my test as the destination drive, for encodes.
    Still waiting for Apple to address this problem.

  • Help! I am getting: Quicktime error -50...when trying to use the "Share" and "Send to Compressor" function. I need to export my show! Thanks for your suggestions! (using FCP7)

    Help!  I am trying to export my show and commercials from the timeline. Both Share and Send to compressor are not working.
    Its starts compressing then I get Failed"Quicktime Error -50". I appreciate any suggestions.
    SYSTEM INFO
    Model Name:          Mac Pro
      Model Identifier:          MacPro5,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.4 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per core):          256 KB
      L3 Cache (per processor):          12 MB
      Memory:          10 GB
      Processor Interconnect Speed:          5.86 GT/s
      Boot ROM Version:          MP51.007F.B00
      SMC Version (system):          1.39f11
      SMC Version (processor tray):          1.39f11

    First try exporting a self-contained movie from FCP, the using the resulting file in Compressor.  To do it, go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion).  In the export window, check the self-contained option but do not "recompress all frames."
    Once the export is finished, launch Compressor then use the self-contained file as the source.  If that fails, you may want to try using theis: http://www.digitalrebellion.com/compressorrepair/
    -DH

  • Compressor 2.3 - Quicktime error:0

    HI All
    This morning I wake up with this new thing.
    Im using FCP 5.1.1 and a 15minutes DV Pal sequence, already converted in the past. This morning I've tried to re-encode the sequence using DVD 90 min. High quality and I've got this new message : Quicktime error:0
    According to Apple , this erro coul appear just in HD sequences with less 1Gb ram. In my case, I've got 1.5Gb RAM and a 720x576 PAL DVcam format.
    I've done just a small test. I've esported the sequence (using export/qt/) and compressor does his job! Any idea? What I could to re-export directly from FCp?Thanks in advance!
    Paul
    G5 MPP 2Gb   Mac OS X (10.4.10)   Panasonic P2 Camera and Fcp 5.1.1 - 1tera Discs

    I am going to attempt both of those options.   In the meantime, I made an H264 version of the file for Blu Ray using a Matrox setting.

  • Compressor Job Fail Quicktime Error -120

    The program quits before it even starts compressing after I click "Submit"  There is no error message or any indication of why the attempt failed.  Except a grey message to the side that says QuickTime Error -120
    I'm using the presets.  Trying to convert a QT movie (Current Settings) to a YouTube file.
    Still using Compressor 3.5.3
    OS 10.5.8
    I trashed the prefs and started over, but the same error continues to occur.
    It's odd, this is the first time it's happening.  I'm taking following the same steps I've always taken.

    OK.. just now out of curiosity I went back into my prefs.
    Deleted 2 Quicktime P.Lists
    Deleted Compressor P.List again
    And just for the heck of it deleted my Final Cut User Data and Final Cut P.List
    Instead of putting the word YouTube in the file name for either name, I took that out.
    Clicked Submit and renamed the file once.. then the second drop down asked me to rename and I named it a different name with no spaces.
    Now it's processing fine.
    Not sure what I did, but something worked. 

  • Compressor error - Failed:  Quicktime error 0

    I'm sending my FCP sequence directly to Compressor and I'm getting this message after I submit:  "Failed:  Quicktime error 0".  It's a 34 minute sequence.  I'm using DVD Best Quality - 90 Minutes as my setting.  I've googled this error and I'm seeing some folks suggest that there may be a corrupt file in the FCP sequence.  Others say that it may be an insufficient RAM issue (not my issue).  My questions:
    -  Has anyone seen this before?  If so, how did you resolve?
    -  If this is due to a corrupt file, how would I go about finding that corrupt file?
    Any help would be appreciated.  I'm up against a deadline about to get into panic mode.  thanks!

    Michael,
                Try cutting your sequence into ten minute segments to narrow down the problem, if indeed it is a corrupt clip or file.
    You may also want to post your sequence settings, also do you have any stills in your timeline, if you do are they in RGB color space and not CYMK
    DM

  • Compressor issue, keep getting Failed: QuickTime error.-50. Anyone knows why?

    Compressor issue, keep getting Failed: QuickTime error.-50. Anyone knows why?

    I have this problem too, I sent a 1hr long video to Compressor from FCP and trying to save it in H.264
    If works for a few hours and then says it failed.
    Any help would be much appreciated!

  • Quicktime error -2045. I can't use compressor! someone can help me?

    When I try to send any video with compressor, never starts. Always appear this message: Quicktime error -2045. I have looked on internet and didn't find anything about that. Someone can help me? what I'm doing wrong?
    thanks, Noelia

    What version of Compressor? Are you sending fom FCP X or another version of Final Cut?
    I don't know the implications of getting that particular error code.
    Russ

  • Compressor error "QuickTime Error 0"

    I am trying to compress a 7 min. video using Final Cut Studio outputting directly to compressor, after about 45 min. of compressing I get the error message "Failure Quicktime Error 0"
    Settings: 2 pass VBR 6.7 - 7.2, 16 x 9
    This movie does have alot of transitions, effects etc.
    I am able to compress a Sorenson version for review.
    Any guidence would be greatly appreciated.
    Thank you,
    James

    ...Some more info on this topic.
    I tried the same process on another G5 and got the same error so I don't think it's a machine specific related problem. I also tried rendering the video via Quicktime export uncompressed and got the error: FXScript Divide by 0. Now I think it must be one of my effects or several that is causing the problem.
    I am going to go back to previous versions of the project and see if I can render, then perhaps I can isolate the problem. I'll let you all know if I solve it. I have searched the threads and google but have only found more people with the problem and no solutions.
    Thanks,
    James

  • QuickTime Error: 0 message from Compressor

    I recently exported several sequences from FCPro 5.5 to Compressor for conversion to MPEG-2. For some reason, two of the sequences (one is the longest, but only by several seconds; the other is nowhere near the longest) fail in Compressor with the message "QuickTime Error: 0".
    I'm pretty sure I'll be able to export those sequences to QuickTime movies then bring those movies into Compressor afterwards...but I'd really like Compressor to work the way it's supposed to. Anyone know what might be going wrong here?
    Thanks.
    G5 Dual 2.5 GHz   Mac OS X (10.4.8)  

    Okay, I solved the problem. Turned out I had installed Perian (http://perian.org/) a few days back so I could generate FLV movies. (Turned out I didn't need it anyway.) Anyways, it seems to interfere with playback of certain QuickTime movies. I removed Perian, and the problem went away.

  • Quicktime error 0 with compressor

    Every time I try to export a sequence from FCP 5.0.2 using compressor I get an error when it tries to export the video saying "quicktime error 0" also when I try to export as a quicktime movie, I get a message saying "general error" im running compressor 2.0.1
    any help is greatly appreciated
    thanks
    ~jon

    Udate:  The contained Quicktime file that I exported from FCPX rendered fully with no errors in Compressor, so I guess I"m in the clear, but I think this was an unnecessary extra step.  Its a mystery why I was getting the error when sending the render to Compressor from within FCPX. 
    Anyone else that has this issue, please share any solutions if you have them.

  • QuickTime Error:-23 in compressor when I try to render any sequence

    QuickTime Error:-23
    I have been getting this error in Compressor when I try to render out of FCP and have tried reinstalling FCP and Compressor and then QuickTime 7.6.4. Has anyone ever seen this.
    I am running OS 10.5.8 FCP 6.0.6 and QuickTime 7.6.4
    Thanks in advance

    Ok I am going to answer my own question.
    I just uninstalled the matrox mxo2 software to run the device. Now I can render out of compressor. I guess I have to find a way to run both. I have to go to matrox and get find out how to get this to work.

  • Compressor keeps failing - "Quicktime Error 0"

    Hi all
    Compressor 1.2.1 has decided to start playing up - whenever I submit a sequence from FCP HD 4.5, and use any of the mpeg2 presets (or indeed a custom preset) the Batch Monitor opens fine but the batch fails almost immediately, with the error message:
    "QuickTime Error: 0"
    Neither Compressor or Batch Monitor are crashing, the encodes are just failing. I've tried exporting from several different sequences in different projects, and they all fail.
    One of the sequences is only 20 seconds long, just a clean clip captured from tape, no added effects, transitions or edits. So it's not that there's a tricky or dodgy bit of rendering or processing in the middle of the sequence that's making it stumble.
    My sequence video setting is Uncompressed 8-bit 4:2:2 - could Compressor be having problems with uncompressed video? Seems unlikely...
    Oddly, the mpeg-1 preset in Compressor seems to work fine, it only fails on the mpeg-2 presets.
    Any ideas how to fix this?
    Dual 2.5 GHz PowerPC G5 Mac OS X (10.4.6)

    Im have the same problem as well. Did you guys ever figure out how to resolve the issue?
    It seems like this error came up alot in previous versions of fcp, and it was tied to currupt/missing render files or missing mpeg2 components. I think the error is a bit different for fcpx. Ive tried everything I can think of as well.
    Thanks,
    Carlton
    Project is 1080p - 1 Hour:45 - from canon dslr

  • Quicktime Error:0 with Compressor 4

    Here's what I'm working on:
    Mac Pro Quad-Core
    16gb RAM
    Mac OSX 10.7.5
    I"m exporting from FCPX 10.0.7 to Compressor 4.  I have an 82 minute timeline.  When Compressor opens, I select the standard DVD presets for mpeg2 video and ac3 audio.  The audio file renders fine, but the video files fails and I get this error- "Failed: Quicktime Error: 0"  
    When importing every source file, I have optimized media selected.  Any ideas whats causing this? 

    Udate:  The contained Quicktime file that I exported from FCPX rendered fully with no errors in Compressor, so I guess I"m in the clear, but I think this was an unnecessary extra step.  Its a mystery why I was getting the error when sending the render to Compressor from within FCPX. 
    Anyone else that has this issue, please share any solutions if you have them.

  • Quicktime Error -50 on output to compressor

    For the life of me I cannot output my edit!  I have tried a variety of ways, Share, Export via QT Conversion and Compressor.  Each of which fails with the quicktime error code -50.  Despite a general google search i cannot seem to find any reference to thois error code at all.  The problem is particularly frustrating since each output iteration takes several hours before it reports a fail.  I have been at this for a week now and have missed the films output deadline. 
    In anticipation of the questions to this post see below for the following:
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro3,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          3.2 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per processor):          12 MB
      Memory:          8 GB
      Bus Speed:          1.6 GHz
      Boot ROM Version:          MP31.006C.B05
      SMC Version (system):          1.25f4
    Final Cut Pro:
      Version:          7.0.3
      Last Modified:          18/11/2011 14:22
      Kind:          Universal
      64-Bit (Intel):          No
      Get Info String:          Final Cut Pro 7.0.3, Copyright © 2001-2010 Apple Inc. All rights reserved.
      Location:          /Applications/Final Cut Pro.app
    Compressor:
      Version:          3.5.3
      Last Modified:          28/06/2011 09:54
      Kind:          Universal
      64-Bit (Intel):          No
      Get Info String:          Compressor version 3.5.3, Copyright 2003-2010 Apple Inc. All Rights Reserved.
      Location:          /Applications/Compressor.app
    Film details
    20min duration orginal edit captured from JVC 201 camcorder in .m2t format re-formatted via 4 square to appleproresproxy and edited.
    recaptured at appleproresHQ and put onto appleproresHQ sequence before output.
    A couple of attempted Outputs as example:
    1.  Compressor
    Name: H.264 800Kbps Streaming
    Description: H.264 for high-bandwidth streaming
    File Extension: mov
    Estimated size: 107.32 MB
    Audio Encoder
              AAC, Stereo (L R), 48.000 kHz
    Video Encoder
              Format: QT
              Width and Height: Up to 428 x 240
                        Selected: 427 x 240
              Pixel aspect ratio: Square
              Crop: None
              Padding: None
              Frame rate: (100% of source)
                        Selected: 50
              Frame Controls: Automatically selected: Off
              Codec Type: H.264
              Multi-pass: On, frame reorder: On
              Pixel depth: 24
              Spatial quality: 50
              Min. Spatial quality: 50
              Key frame interval: 150
              Temporal quality: 50
              Min. temporal quality: 50
              Average data rate: 0.688 (Mbps)
              Maximum data rate: 0.688 (Mbps)
              Hinted for QuickTime
                streaming server
    2. Share to Youtube
    H.264 video at 8Mbps audio aac 44.1KHz
    Help!!!!!!!!!!!!

    Hi David, thanks for the prompt reply.
    Currently locked out as I am attempting another output.  I have succeeded outputting as a self-contained fcp mov with very large output size ~24Gb.  Took a few minutes to process
    Dimensions 1280X720
    Codec:  Apple prores 422HQ, Linear PCM, timecode
    Colour Profile:  HD(1-1-1)
    Duration 20mins
    Audio channels 2
    total bit rate:  145, 064
    Ok as i'm typing that processing completed kicking out a 1.29Gb Youtube version as follows:
    Dimensions 1280X720
    Codec:  H.264, AAC, Timecode
    Colour Profile:  HD(1-1-1)
    Duration 20mins
    Audio channels 2
    total bit rate:  8,289
    I achieved this by re-ingesting the above outputted selfcontained FCP mov back into a new project, dragged to sequence and re-output via share option took around an hour to process.  So I'm geting somewhere, but still not convinced of quality

Maybe you are looking for

  • Hp Laserjet p1102w can't install wireless

    I'm trying to connect my printer wirelessly to my home network but when the software asks me to connect the usb cable it stops and I get the message "HP Printer Software has stopped working" My OS is Windows 8.1, the printer is HP Laserjet p1102w and

  • Is there a replacement plug in similar to the "Variations" command that was aborted in CS6

    Is there a replacement plug in similar to the "Variations" command that was thoughtlessly aborted in CS6... ANYTHING SIMILAR AT ALL. I know what all you "pros" will say, but I have been using it since it was created and I like it

  • FTREE_NODE: Find parent node which has no child nodes

    Hi guys Does anybody know how to find a parent node which has no child node(s)? I couldn't find any build-in at the online help. Is there a trick to got this? Thanks in advance Remo

  • ITunes Playlist Main file disappears!!!! Alarm

    Since I updated to 7.6.1.(9), 2 times this wk when I opened iTunes, it gave me a message, about a problem with the playlist, and turns out that the file containing all the info, folders, playlists, play counts, etc., etc., got erased or corrupted, an

  • Back up & restore/erase or ignore??

    Hi all. I have ordered a repair for my iPhone. The instructions I recieve say to back up & erase all data from the iPhone before sending it off! However my iPhone has lots of problems (cant hear when making/receiving calls, dodgy home button, phone r