Compressor 3.05 "unable to submit to queue" after upgrade to Mountain Lion

I have successfully compressed 1500 videos using Compressor 3.05 while running OS X10.5 (Leopard). I just upgraded to 10.8.3 (Mountain Lion) and the first batch I sent to Compressor had destination issues that I fixed (I think). I'm not getting any more exclamation marks but now it drops down the error message "Unable to Submit to Queue - please restart your computer or verify your Compressor installation is correct." I have restarted, of course. I have no idea how to verify the installation is correct. We did migrate all the files to a new boot drive, but FCP 6.0.6 and all other programs are working well.

Perhaps Compressor installed correctly but Qmaster didn't. You could try running Compressor Repair (check the trash preferences box) and see whether that changes anything. Also repairing permissions after installing is always a good idea,
FWIW, I've been skeptical about the reliability of using Migration Assistant on pro apps – although I know there are a lot of hurdles to get over if installing FCS 2 on either Lion or ML and can understand why. I hope that someone who has actually installed FCS2 on either of those OS versions will chime in with suggestions based on their experience. Have you tried getting the Rosetta installer to install on ML so you can use the FCS disks?
Russ

Similar Messages

Unable to access connected server after upgrade to Mountain Lion

I upgraded from snow leopard to mountain lion and now am unable to connect to my server.
The error given is "there was a problem connecting to the server"
And in console I get a sharepointbrowser error
There are a few other posts on this but none seem to actually have a fix (for example one recc. was to reboot a bunch of times) I would think deleting/removing the server from the list would work but I don't know how to do that.
I can access the share if I cmd-k and access it manually though so it isn't a SMB issue it seems to be a mountain lion/OS issue.

Hi DWAM_2
Same question to matthew:
1. Are you accessing the KVM through CIMC?
If so, try using a monitor, the CIMC may have been restored to default and has no IP address
Verify(ping) as well that you can reach CIMC and if you do use https://
Also, verify if you connected to the connect ethernet port :)
2. Did you upgrade using HUU(Host Upgrade Utility)
If you didnt, you may have a problem there, both BIOS and ucs firmware needs to be compatible with each other. That is why cisco developed HUU to assist in updating
3. Still does work?
You might need to reset the CMOS, check the manual of your C-series
Typically, you need to short out some pins inside the server or worse case, you might need Cisco's tech support on site
to reload the firmware through hardware

Compressor 4.2 Unable to submit to queue

I am having trouble with Compressor 4.2, "Unable to submit to queue, Please restart your computer or verify your Compressor installation is correct."
I am not able to compress anything from Compressor 4.2, but I am able to use all the Compressor preset including that one that I create in Compressor from FCP X.
I have repairer Compressor with Digital Rebellion,
I have delete Compressor with FCS Remover from Digital Rebellion,
I have remove the Compressor folder in Library Application Support,
If I open Apple Qmaster there is a massage "Apple Qmaster cannot be opened because of a problem.
I have also remove Apple Qmaster.
I don't know what else to do.
Any help would be appreciated.
Ricky

Im surprised that trading trashing the Compressor folder wasn't the cure.
Try moving Qmaster to the trash (you don;t have to empty it).
Any luck?
Russ

Server admin is unable to login to server.app after upgrade to Mountain Lion Server?

After upgrade to Mountain Lion Server I am unable to login to the server tools. When I input the admin user name and password the dialog box just shakes indicating the wrong password. But it is the correct password. How do I reset the password or if necessary how do I rest the server and start over on Mountain Lion. I found info on how to reset the server on previous versions of the server which involved executing a plist in the LaunchDaemon folder. However that file does not exist on the server following upgrade to Mountain Lion.
Thanks, Howard

I upgraded today and had the same issue. I took following steps to fix my computer.
Boot into Recovery Partition (Hold Option Button while booting)
Open Terminal.
Type resetpassword
Select your hard drive
Select the user account (Administrator)
Enter a new password for the user
Reenter password
Save
Restart
Boot normally, Login as Adminstrator with the new password and add "Admin" permission to your account.
Restart
Everything should be working as expected

After upgrading the Mountain Lion I am unable to play any DVD's

After upgrading my late 2009 iMac to Mountain Lion I am unable to play any DVD's. When I put a DVD into the superdrive, it tries reading the disk and then it ejects it. Is this problem related to the upgrade?

Hmmm, this page:
http://store.apple.com/us/product/MD564/apple-usb-superdrive
Does not list the iMac as one of the computers the SuperDrive runs with.
I assume you literally mean the USB SuperDrive in your statement above.

Unable to see certain folders on server after upgrading to mountain lion

Hello, I recently upgraded from lion to mountain lion on my MacBook Pro.
With lion I would connect to the server at work through finder under shared. Now with mountina lion, the server still shows up but when I connect to it only shows 3 folders there now when there are a lot more than that in there. I finally was able to connect to the folder I needed by hitting command + K and tryping out the path with smb.
The folder appears as an external disk icon when I connect to it like this so I guess maybe mountain lion recategorizes it as such and no longer displays it in finder when I connect to the server. Does anyone know how to fix this?

Hello nikkjazz. Welcome to the Apple Discussions!
The 802.11n AirPort Extreme Base Station (AEBSn) supports USB storage devices that use a block size of 512 bytes ... and is true whether the device is formatted for HFS+, FAT16 or FAT32. If yours is not, then it may explain why you can see the folders when the drive is directly attached to the Mac, but not so when connected to the AEBSn.

TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
My iphoto was working with photostream and now it will not connect at all.
I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
help!

FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

Unable to sign into icloud preferences, after upgrade to Mountain Lion

I upgraded to Mountain Lion yesterday and I can't now sign into Icloud preferences but password works for everything else.

Open Disk Utility, select Macintosh HD in the sidebar and repair permissions. If it doesn't work, reinstall OS X 10.8.2 > http://support.apple.com/kb/DL1581

Compressor unable to submit to queue

hi there, i was using compressor3.0.3 and everything worked fine then a message would come up when i submit a project saying " unable to submit to queue. please restart or verify compressor install is correct". i spoke with a mac person that had me trash my prefs then open a new user. it worked at first then i got the same message. i uninstalled fcp then reinstalled but it is still the same. can anyone help??? thank you

I had the same issue on a couple of machines, the common denominator seems to be a character that is not a valid network address character i.e. "&". I removed it from four locations I am not sure which is actually important. Here are the 4 locations: 1. Sharing preference option "Computer Name" 2. Sharing preference then in "Edit..." option "Hostname" 3. Apple Qmaster preference Setup pane option "Identify this QuickCluster as:" 4. Apple Qmaster preference Advanced pane option "Identify this computer to Qadministrator as:".

Getting "Unable to submit to queue" message

I'm trying to run a .mov file through Compressor 3.0.5 to shrink the audio track using a Dolby Digital Pro 2.0 setting. I load the necessary file, destination, and settings info into the job, but when I hit "Submit," I keep getting a dialog box that says "Unable to submit to queue. Please restart or verify that your installation is correct."
Well, restarting hasn't helped. Neither has trying some different settings, to see if the problem is just associated with one configuration. I don't use Compressor often, but the last time I tried this routine - quite a while ago -- I believe it proceeded without a hitch. All my other FCS apps - Final Cut and Motion, at least -- have been working fine.
Any suggestions on how to break through this submission barrier? I've got a DVD project that needs to be delivered in 24 hours. Thanks.

There may be an issue with the installation of Compressor.
Digital Rebellion also has FCS remover which can assist with properly removing Compressor from your system. You can then reinstall from your discs.
Due to the shared elements in FCS you will need to feed a large part of the discs to complete the reinstall. You may just want to consider uninstalling all and then reinstalling all of FCS.
Digital Rebellion also has a preference manager that can save preferences for FC, DSP, etc. You get to choose what you would like to save.

Simple Solution to "Unable to submit to queue..." Problem

This may not work for everybody -- configurations are so different
Did a clean install of the OS, reinstalled FCS2 (all parts), but still got the "Unable to submit to queue..." message. While I was looking at the Compressor screen with that frustrating message, I clicked on the Batch Monitor button.
Up came the Batch Monitor screen saying "No cluster" in the left side column and "No cluster" in the right side column. Then I went to the Batch Monitor User Manual under the Help menu. On page two, I found this wording accompanying the "Cluster List" section: "Displays a list computers (sic) available for processing batches, including 'This computer' (the one running Batch Monitor) and all enabled Apple Qmaster processing clusters..."
Well, "This computer" did not show up in either of the columns -- both showed "No cluster."
I called Tech Support to see if this could be at the bottom of my "Unable to submit to queue..." problem.
The helpful staffer told me to go to the System Preferences panel and check the "Computer Name" under the "Sharing" settings. There was no computer name. Since I am the only person using the G5, I never saw a need to name it.
I put in a name and rebooted. Problem gone! Compressor works fine after all these months of frustration and doing clean installs, etc.
Hope this works for some of you, too.

Hello David,
I cannot agree with you I am afraid. iChat works fine for me on 10.4.3. I am sure it works fine for many others too. There are some set up issues, they seem to get resolved pretty quickly in here.
Not a criticism as such David - But suggesting that the best fix is a retro grade one is perhaps not the best resolution to a problem.
I am not saying I can fix your problem - there are many here better than me at sorting out problems ( I won't name names but they know who they are! ) :-)))
Why not post back with some more information about the problem. The set up there. Any error messages you get.... I'll bet you a Pound of Apples and a large Pineapple that some one can get you chatting happily on 10.4.3.
Now theres a challenge!!!
Best regards
Ian

Upgrading to Mountain Lion using free upgrade, download froze halfway, tried again and unable to use same code twice. Please help?

Upgrading to Mountain Lion using free upgrade, download froze halfway, tried again and unable to use same code twice. Is there a way I can get a new code without having to submit other information (scan/photo of proof of purchase)?

Open the App Store and navigate to the Purchases tab. You should see Mountain Lion there. You can click there to restart the download.

I just upgraded to mountain lion. I am unable to use airplay mirroring through my apple tv. They are both on the same network. It says a airplay icon should appear in the menu bar but it isn't there. What am I missing here?

I just upgraded to mountain lion. I am unable to use airplay mirroring through my apple tv. They are both on the same network. It says a airplay icon should appear in the menu bar but it isn't there. What am I missing here?

http://www.apple.com/osx/specs/

Upgraded to Mountain Lion a week ago suddenly unable to receive incoming emails from Mail.6

Upgraded to Mountain Lion a week ago. Suddenly unable to receive incoming emails from Mail.6
Can successfully send outgoing messages.
Have completed following tasks to no avail:
1)          When click on "Take all accounts online" and entering password for gmail / looking at Mail Connection Doctor: Got Green light, Mail was able to connect to the Internet. But…
"Trying to log in to this Goggle Imap account failed. Verify username and password are correct."
I have verified username and password being correct.
2)          System Preferences > Mail, Contacts and Calendars typed in name, email address & gmail password and got this message.
"Unable to verify account name and password."
3)          Mail> preferences>account>password. Confirmed correct password, name, email address and imap "address" Then to Advanced & confirmed correct port . Restarted computer.
"lay person terms" appreciated.
Thanks!
Laila

Found solution, Yeay!   No coincidence. Mountain Lion (osx 10.8, upgraded) is not compatible with Gmail if one has 2-step verification set up on their gmail security settings.
There are 2 options to solving problem
1)   https://discussions.apple.com/message/19109209#19109209)
This will take you through the process to disable 2-step security feature on gmail security page. Thank You iPatA.
2)   http://support.google.com/accounts/bin/answer.py?hl=en&ctx=ch_b/0/SmsAuthConfig& answer=185833
This will take you through the process of assigning an "application specific password" to upgraded Mail 6.0 for successful communication between Mail 6.0 Mountain Lion while keeping a 2 step verification process if you prefer.
Thanks for you energy & effort rkaufmann87.
Sincerely, much appreciated.
I love this Apple community.

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

Nicholas...
You may need to restart the Apple Mobile Device.
Follow the instructions here > iOS: Device not recognized in iTunes for Windows

Compressor 3.05 "unable to submit to queue" after upgrade to Mountain Lion

Similar Messages

Maybe you are looking for