Compressor 3 "no cluster found" message - EASY FIX

Greetings,
I have had to install compressor 3 times before I finally found this easy fix. In my case Compressor would stop working when a video would get "stuck" in the batch and just go on forever. From then on the batch would always say "no cluster found", and if I tried to submit a batch it would say something like cluster no found.
So how did I fix it without the dreaded delete everything and reinstall? I saw a post that said to check that your sharing name matches your cluster name in the qmaster system preferences. They did not exactly match. The name in sharing was "My Mac" and the name in qmaster was "My Mac Cluster" I changed it to match the sharing "My Mac" and hit the start sharing button. I reset my Mac (no sure if that's needed) and then opened the batch monitor. Instead of "no cluster found" it now said "My Mac" and when I submitted a batch in compressor the "This Computer" showed up again, and it stared working again!
Not sure if this works in all cases. But I hope this post helps someone else from having to reinstall everything, AND maybe apple can read this to help figure out what the problem is with their software.

i had the usual "no clusters found" in batch monitor, and "this computer" did not appear in batch monitor. so, when trying to submit a batch from compressor, i got the "unable to submit batch / retart your computer" error message.
so for 2 days i tried really EVERY METHOD i found in all blogs, threads, posts, discussion forums to remove / reinstall / make work compressor.
here what i tried:
fcs remover.app / completely reinstall fcp from scratch
(http://www.digitalrebellion.com/fcs_remover.htm)
partially delete / reinstall compressor / qmaster only via standard install
(http://docs.info.apple.com/article.html?artnum=302845)
partially delete / reinstall compressor / qmaster only via pacifist install
http://www.scottsimmons.tv/blog/2008/01/11/compressor-hatred-resolved/
http://www.charlessoft.com/
NOTHING WORKED. before completely re-installing my entire OS, i found this post here AND IT WORKS - at leat on my machine
i hope this will save some of you sleepless nights
regards
ivan

Similar Messages

My Adobe has stopped allowing me to move library books from my PC to my KOBO (both show authorized on the ADE. the message reads : CE_COPY_NOT_ALLOWED - No permission to copy book. It used to work. Any easy fixed for me?(I already tried uninstall and re-

My Adobe has stopped allowing me to move library books from my PC to my KOBO (both show authorized on the ADE. the message reads : CE_COPY_NOT_ALLOWED - No permission to copy book. It used to work. Any easy fixed for me?(I already tried uninstall and re-install)

Welcome to the Club! Got the same Problem and had a really hard time reaching the Customer Support because they were down due to maitenance! Just wrote to their experts chat and hope to get an answer in this life!
I tried to authorize my Computer and eBookreader with a new Adobe-ID, but it says I've done used this ID too often, even though it was brandnew! Can't copy my just-purchased eBook because "Copying is not allowed".
I hold my thumbs for you that Adobe solves this Problem fast enough. Other ways I'll sell my eBookreader and buy the Kindle-Reader from Amazon and say GOOD BYE to Adobe!

Large amount of "original file could not be found" messages

I'm looking for an "easier" fix to a strange problem - here's the situation:
1) I keep my iTunes music on a separate HD from my PB, and the HD was starting to die (as referenced in another thread - woohoo for DiskWarrior).
2) After rebuilding the directory on the old external, saving most of the music files, and copying them to a new external HD, I launched iTunes. In Preferences, I set the path to the new iTunes folder on the new HD under Advanced.
3) Once I did this, iTunes gave me the updating library message and it worked on that for a bit.
4) iTunes found most of my recent music - some Purchased and some ripped from CDs. However, I'd say 95% of my 12555 songs have the circle/exclamationpoint icon before them, and when I click on them, iTunes tells me it cannot find the original files.
5) The odd part is that all of the files are where they are "supposed" to be. Each song is nested safely inside the correct artist and album folders. Basically, I just have to go - one by one - through the files and reconnect the song name with the file.
Obviously, with 12555 songs, this is taking me FOREVER, and I've made only a small dent in the giant list of disconnected files.
Does anyone know of an easier way to get iTunes to "find" these files without having to go through and individually connect each and every file?
Thanks in advance!

Yeah, it's definitely not working - I'm not sure what "consolidate library" did, but it didn't help the double-file-listing-but-one-is-extraneous-and-has-the-exclamation-point-icon problem. Plus you can't sort that column in order to just delete them all at once.
The playlist problem is extra-annoying because if I delete the duplicate file listing that has the ! icon, it deletes from the playlist, rather than leaving the correct version of the song in the playlist.
Any other ideas? This is way more frustrating than I like my computing experiences to be, especially since iTunes is touted as such fantastic software. If the files weren't organized where they are "supposed" to be, I could understand there being this problem, but the files are all in the correct folders!

After my last itunes update, I get an "Original file could not be found" message. Does anyone else have this problem?

After my last itunes update, I cannot play my music on my PC. I get an "original file could not be found message." Has anyone else had this problem?

If you post back the two paths I may be able to suggest an easy fix
(that would not have created duplicates).
Oh well...
Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls, such as lost ratings and playlist membership.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

Replacing the "No Items Found" message with Javascript

On this page http://www.sedonamagoretreat.org/test in the second "Program Dates" box in the righthand sidebar, I'm attempting to implement a script I found to replace the "No items found" message with a custom html file.
The javascript is here: http://www.sedonamagoretreat.org/js/no-items-found.js and the html file used to replace the message is here: http://www.sedonamagoretreat.org/prog-dates-alternate-content.
I'm sure it's an easy fix and I'm just overlooking something...any suggestions to get this script working are welcome - thanks!
Linda

If it still doesn't work after you move the script then you might need to update your script to the following:
$(document).ready(function() {
     $.each($("."+webapp_wrapper_div), function() {
               if($("." + webapp_wrapper_div).html().indexOf("No items found.") != -1) {
                         $.get(alternate_page_html, function(data) {
                                   $("." + webapp_wrapper_div).append('<div id="ajax-temp" style="display: none;"></div>');
                                   $("#ajax-temp").html(data);
                                   $("." + webapp_wrapper_div).html($("#ajax-temp #" + alternate_page_div).html());
All I did was wrap the if statement in an $.each() function so that it does this to each instance of your web app item list.
Also, you should probably change your variable for "alternate_page_html" to "/prog-dates-alternate-content" so that this would work on pages that are in a folder in your site. Without the "/" this might only work on pages that are on the first-level of your site. If you tried this on a page at "/about/contact" then your get request without the "/" would be trying to get "/about/prog-dates-alternate-content" which doesn't exist.

'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK. Help, please!

Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPal

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

I am getting a 404 not found message on my mac before the web page closes down

I am getting a 404 not found message on my mac before the web page closes down. How do I fix this?

Is it an internal or external web page? Does this occur on all web pages? If not, post the URL of one that 404s.

Xcelsius exe won't launch - Entry Point Not Found message given

-Operating System: Windows XP
-OS Patch level: SP3
-Office Version: 2007
-Flash Player version: Adobe Flash Player 10
-Xcelsius Version and Patch Level: Xcelsius 2008 5.3.0.0
-Xcelsius Build number (Help>About Xcelsius): <not accessible>
-Business Objects Enterprise version/patch level (if applicable): Crystal Reports 12.1.0.892 - SP1
-Issue Description: Xcelsius exe won't launch - Entry Point Not Found message given
-Steps to Duplicate: When I try to open Xcelsius.exe, I receive a message box that says "Xcelsius.exe - Entry Point Not Found" "The procedure entry point ?LevelDiffToFirst@CTreeBtnCtrl@@QAEHPAU_TREEITEM@@@Z could not be located in the dynamic link library TreeBtnExtDll.dll."
I have uninstalled and re-installed Xcelsius with the same results.
Also, when I open Crystal Reports 2008, the "Crystal Reports 2008 SP1 - Software Manager" opens and shows an update available - SP2. When I try to install the update, it downloads and then displays a message the this update is only available for Crystal Reports 2008 SP1. I believe that is my current version.
After some research, I believe my CR Runtime app may be a different version than what Xcelsius.exe is expecting, but I don't know how to check or fix that. Any help is appreciated.

Hi
I think I've managed to fix this error. I compared the TreeBtnExtDll.dll in my Xcelsius directory on the machine that wasn't working and one that was and found that the broken machine was using an older and smaller version of TreeBtnExtDll.dll. 89k and a date in 2008 I think. So I copied my newer version which was 109 k and dated 11/2009 into the C:\Program Files\Business Objects\Xcelsius directory of the broken machines and now xcelsius appears to be working fine.
I had lots of trouble installing the SP3 release because of the media issues so maybe the install wasn't complete.
Anyway, I hope this helps you
Rowena

I can no longer access the movies I have downloaded. I get a "original file cannot be found" message. Can anyone tell me how to access them? Thank you

I cannot accessmovies that I have downloaded, I get "origianl file cannot be found" message does anyone know how I can fix this problem. Thank you

This is what I had to do to access iTunes store with 10.4.11 (took all day for the downloads)
1. download & install iTunes 9.2.1 (101 MB)
2. download & install Quicktime 7.5.5 (61 MB)
3. message 'need to install Safari 4.0.3 or later' (and I never use Safari)
4. download Safari (26 MB)
5. Safari won't install without 'latest security update'
6. download latest security update 2009-005 (Intel) v. 1.0 (172 MB)
7. take a long walk
8. install security update and restart
9. install Safari and restart
And yes, now I can download music again from the iTunes store. I would have given up and gone with Amazon.com but mp3 downloads are only available to folk in USA, and I'm in Australia.

My MacBook Air says it has no wifi hardware. This happened yesterday. Any ideas? it is almost 3 years old. It is under warranty but I wonder if there is an easy fix. I am not very tech oriented, so I am looking for a very easy fix.

Is there any easy fix to the problem I encountered yesterday (and which continues)? Since yesterday I have had no internet access on my MacBook Air. The icon at the top of the screen shows just the shield outline, and underneath in faded letters says "Wi-Fi: No hardware installed". I received an error message that said s
something with a minus 50 referenced.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".

!File Not Found message

My itunes does not connect to the underlying music files on my external drive. When I try to play, I get the dreaded exclamation point and "file not found" message for all. While I could click on each of the 10,000+ songs and reassociate the file to the location on my external drive manually, this would take forever. So I am looking for a way to reassociate all at once.
How it happened: I am not sure. But when I went to check the settings, it showed that somehow it had restored the default location of my files to the C drive, instead of the F drive (where my external drive is located with the files).
What I did: I changed the setting back to the F drive as the location of the music files. I thought that would do it, but unfortunately the error message still appears. I surveyed the support boards last night on Apple.com before I got too tired and couldn't find anything exactly on point.
My concern: While at last resort, I could back up all my files and then attempt to drop and drag my whole library into Itunes again, I will lose all my many playlists and the play count. This information is important to me. How can I preserve it?

There is a support article HERE that discusses moving your iTunes music folder (which is pretty much what you are trying to do). I''m not sure what will happen when you run the "consolidate library" since there is nothing actually there to move.
There's also some documentation in the iTunes help file under "Changing where your iTunes files are stored."
A last resort would be to edit the itunes library.xml file (after making a copy of it). I did this a while ago when I wanted to get rid of the drive letter designation and replace it with UNC (my music sits on a networked drive).
By the way, are you sure Windows is still reporting the drive as "F:"? If Windows has changed the letter, iTunes will revert the default location to My Music\iTunes until the drive is "fixed."
Good luck.
Message was edited by: GLNHP

CNA 6 InstallShield Wizard will not install with a JVM not found message

I ran CNA 5.5 up until last week when Java 7 71 update hit. When I tried to launch, I received JVM Not Found, that was all. So I figured it was time to install CNA 6, however during the install process I now get a pop up box stating InstallShield Wizard will not install with a JVM not found message. No other error messages, no logs, and the installation ceases. Tried installing CNA 5.8.9.1, and CNA 5.5 again, all stop at the same point with the same message. Anyone else see this issue?

When you start Network Assistant, Java determines whether the resources it needs are available. If they are not, Java displays the message Could not create Java Virtual machine, and the session ends. To overcome this problem, open the file C:\Program Files\Cisco Systems\CiscoSMB\Cisco Network Assistant\startup\startup.properties (the default installation path), and modify this entry:
JVM_MAXIMUM_HEAP=1024m
Replace 1024m with a lower setting that does not exceed the available RAM. There is no way to foresee what value will work. Try 512m , and lower it further if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to define your own dial peers.
If the Network Assistant InstallShield wizard fails to start, it is likely that the temporary folder location defined through the environment variables TMP and TEMP has some problem. Assigning a correct temporary folder location can fix such problems.
Source: http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html#pgfId-840748

Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274: TRexUtils/ParallelDispatcher.cpp:275 message not found; $message$=

Hello Gurus,
I have a couple of calculation views in HANA and each of them has text fields (like Employee Name, Country Name etc.).
As part of my project requirement, I have join those two views and get all the fields that exist in them.
When I am doing so, I am getting a weird error as shown below.
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274:
TRexUtils/ParallelDispatcher.cpp:275
message not found; $message$='TSR HTKD JFSDFM'
Please check lines: 59,
Upon, researching further, I could see that the value 'TSR HTKD JFSDFM' is the value in text field of Employee Name.
I did try to increase the length of the field and change the data types but nothing has worked.
Could you please help me in getting this one resolved.
Thanks,
Raviteja

Hi,
I am exactly facing the same issue:
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274:
But i found a fix :-) .....
This may be a very late reply but it would help people who desperately searching for an answer for this issue.
I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
So i used CAST function to truncate the excess junk values (may be spaces).
Example:
I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
Enjoy....
Thanks & Regards
Prakash K

Second day after updating to iOS 6 on my iPhone 4, my contacts have duplicated. Probably not all but many, and my contacts already numbered in the thousands. Please tell me there is an easy fix to this problem!! I already had to go through contact-by-co

Second day after updating to iOS 6 on my iPhone 4, my contacts have duplicated. Probably not all but many, and my contacts already numbered in the thousands.
Please tell me there is an easy fix to this problem!! I already had to go through contact-by-contact when I bought this phone and added contacts from my Blackberry and MS Outlook on the phone. Many duplicated at that time and Apple said the only fix was to go through each one and decide to keep or delete. I really don't want to do that again!

I had this problem while I had iOS 5.1.1 installed for many months. Fortunately I only have about 150 contacts and only about half of them duplicated. I found that my problem was the way thing were set up in Outlook. I removed all of the duplicates and corrected everything in Outlook contacts (ignoring the address book) and have not had the problem since, Hope this helps.

AppleSyncNotifier.ex-Entry Point Not Found message, "the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.

After an update, every time I start my computer (that uses 64-bit Windows 7), there is an AppleSyncNotifier.ex-Entry Point Not Found message, "the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll. I have checked and tried suggestions to resolve this from this site and several other places with no success. Appreciate advice how fix and resolve this

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Compressor 3 "no cluster found" message - EASY FIX

Similar Messages

Maybe you are looking for