Compressor 4.1.2 bug tested this is my finding.

TEST 1
Apple OS X 10.9.4 Build 13E28 - Compressor 4.1.2 - Files used is QuickTime 1920X1080i Prores.
The Blu-ray creation work but if you re-insert the BD-RE disc (Verbatim) the disc refuse to eject.
You need to shtdown the computer to get the disc to eject because the finder ger unresponsive.
The MACGO Blu-ray player refuse to play the disc but the disc play in regular Blu-ray players.
The burner used is LG BD-RE WH.16NS40 and everything is clean install two week ago.
TEST 2
Apple OS X 10.9.4 Build 13E28 - Toast Titanium 11.2 - Files used is QuickTime 1920X1080i Prores.
The Blu-ray creation work perfectly with the BD-RE disc (Verbatim) reinsert and the disc eject perfectly.
The MACGO Blu-ray player play the Blu-ray disc perfectly and also any home regular Blu-ray player.
The burner used is LG BD-RE WH.16NS40 and everything is clean install two week ago.
Conclusion : Since Toast Titanium 11.2 with OS X 10.9.4 work Apple Compressor 4.1.2 is the bug.
The disc created with Compressor have make Apple disck utility crash when try eject.

If you have system backups, you can probably restore to an earlier version. That would take care of your needs prospectively. Any libraries that had been updated, would;t open in an earlier version of FCP X. But of course, your master files could be used in both Final Cut and Compressor.
Also, send your results to Apple using the Provide Compressor Feedback link in the Compressor drop down menu.
Russ

Similar Messages

Report a bug, if this problem is not solved, p2p of rtmfp will not be of much use

Recently, we have several clients on a p2p application, but we use the development version to test, two-way voice and video connection is not successful, several customers of the network environment is as follows:
First of all, there is no firewall;
These networks have in common is:
After an optical access, the subnet with a lot of routers, one by one, and some series, some parallel, some in series and then parallel, and some in parallel then in series, in short, they can be online, and then not the same segment of the computer, p2p connection is not successful, and other computer connection is not successful, and some also use the vpn.
Analogy: 192.168.5.10 and 192.168.10.10 to connect not, 192.168.5.10 and 192.168.5.11 is ok, is 192.168.5.10 may be outside the network of other computers can connect to, but 192.168.10.10 possible and other computers outside the network connections are not.
Hope you solve this problem as soon as possible, because rtmfp too expensive, otherwise p2p applications, are generally large companies (schools, government) affordable, and their networks are very complex, they do not take, you will no client .
My English is not very good, google translation
I gave you a bug report so long, how did not care for me ah;
This forum nobody, or you did not test this bug, you do not have time to correct this bug;
Either we modify not the flash player platform to the bottom of things, I will not give you advice.
In fact, standing on a technical point of view to think that I have is to use a socket network communication can be OK, network barrier, it is not.
But would like the user's perspective, I can be normal to the Internet, other p2p communications software, I can, on this thing, impossible, it is this software not work, so that this bug is that we must solve the .
I am very concerned about this issue every day and came to see nobody replies, I think this problem, I think, to solve this problem, you can proceed in two ways:
1.dns
I think it may be able to solve this problem, dynamic dns,
The idea is: to allow users to connect to the server, the user computer first upd listener (that is, iis services), then farid + domain to form a secondary domain name server dynamically to resolve the domain name to the user's computer, in a timely manner to refresh dns.
In this way, the user's computer, there is a fixed identity.
2 gateway
From users within the LAN to solve this problem, it can only proceed from the gateway.
For example, to use arp and other means to get to the router, where each segment ip then ip, similar to the route command to specify more than one gateway to the user's computer may be able to solve this problem.
In theory, these two methods may be feasible.
We also expect a new solution, I do not know Daoxing not
Speak before this program, take a look at our test for RTMFP p2p network topology, and the test results (explain, test, do not open the firewall and router are not set up static routing).
Computer A, computer B - "router A -" server S
The above NetConnection.Connect.Success 95% NetStream.Connect.Success 5% NetStream.Connect.Fail
Computer A - "Router A - servers S" - routers B - Computer B
Above, NetConnection.Connect.Success, NetStream.Connect.Success
Computer A - "Router A - servers S" - router B - routers C - Computer B
Above, NetConnection.Connect.Success, 50% NetStream.Connect.Success 50% NetStream.Connect.Fail
(Computer A - Router A, computer B) - router B - server S
Above NetConnection.Connect.Success, 100% NetStream.Connect.Fail
Computer A - "Router A -" router B - server S "- Router C" - router D "- computer B
Above NetConnection.Connect.Success, 100% NetStream.Connect.Fail
Computer A - "Router A -" Router B - "Router C -" server S "- Router D" - Router E "- computer B
Above NetConnection.Connect.Success, 100% NetStream.Connect.Fail
See the above test results, is not very bad, the key is FMS4.5 sell 450,000 RMB in China, their own software does not do a good job, but also to sell such a high price in China, a man named QQ. The above test environment, all 100% NetConnection.Connect.Success 100% NetStream.Connect.Success, free, QQ has more than 100 million users, QQ companies rely on advertising to make money game.
Seems to digress, huh, huh.
The test results, 100% NetConnection.Connect.Success, and NetStream.Connect.Fail the main reason is because the route connected in series or more than two or two and then caused.
From a technical perspective, as a packet travels through a number of the NAT router default all packets can be out, new packets can not be into the second layer of the router caused.
Find the reason, we think of a countermeasure to solve this problem from the software itself.
The last case of the above test environment, for example:
When computer A and server S NetConnection.Connect.Success computer B with the server the S NetConnection.Connect.Success, computer A to Router D sends an upd packets, not because the router can only broadcast the data packet to computer B, so 100 % NetStream.Connect.Fail.
The 100% NetConnection.Connect.Success, if we can NetStream.Connect, and NetConnection.Connect connected together, is not can be 100% NetStream.Connect.Success?
In other words, no matter what circumstances, computer A and computer B can and server S connection is successful, the other way round, that is, the server S and the Computer A or Computer B can connect.
We can not let the computer A or computer B, pretending to server S (In theory, called NAT, technically speaking, is to modify the source ip of the packet header and source Mac server S, and parity), the router not in the NAT, and other communications.

Hi Mr. Wog,
My guess is that once you see an estimate for replacement for hundreds of dollars, those scratches won't look too bad anymore. There are products to cover the outer casing, and some people put stickers on, or even paint (I don't recommend either, but ymmv). Good luck.

Regarding color picking and color management - can someone, please test this?

Please take a few seconds to test this and let me know the result.
This is with CS5 but probably the same with older versions:
Create a new document and zoom out so that the canvas is smaller than the window.
Change the Standard Screen Mode color to Custom and choose some color, for example gray that is 60 for each R,G, and B.
You can do that in the Interface page of the Preferences or by right clicking on the empty area of the window that is beyond the image's canvas.
Using the eyedropper tool pick the color of that empty area
Press Alt + Delete to fill the canvas with that color.
Do you see a difference between the canvas and that area.
I see a slight difference when the color management preview is on and no difference when it is off (soft proofing using Monitor RGB)
I have some ideas but it will be great of someone can make a clear conclusion and explanation for this behavior.

Thanks for that confirmation, Chris.
Same thing with my apps, though with effort I suppose the colors for the controls and background COULD be put through the color management system at startup time... Lots more complexity though, and that would kind of diverge with the concept of theme selection, not to mention potentially uncovering bugs in the control implementations... And, if the user has gone out of his way to set everything to a pretty shade of blue, and along comes a color-managed dialog that's gone greenish because that's what those color values REALLY mean, that would likely be reported as a bug just because it's different...
-Noel

ITunes 7.4.1 error -3256 with airtunes -- doesn't anyone test this stuff?

I have problems with iTunes 7.4.1 and my Airport Express. Using iTunes to send Airtunes music runs for a bit, then hangs up. I also get error -3256 when trying to run both Airtunes and computer speaker. Isn't anyone testing this stuff before its shipped?

This isn't too helpful, but I'm not having this problem, so one piece of the puzzle is that it's not a consistent problem.

I used to have a Snow Leopard that could run as fast as I could type and jump any hurdle. Now I have a mountain lion that can't get up in the morning and takes 2 minutes just to bring up the settings panel. Did Apple actually test this thing????

Apple,
How did you test this Mountain Lion? Was it in a zoo cage with just 30 feet for it to run? Because out in the open it can't even walk!
Not to mention the fact that once I had upgraded many of my preferences and setting had disappeared.
Thank you also for telling me that the upgrade would take 34 minutes - it took 56.

It did work properly, for almost everyone.
You must have something on your computer that is causing it problems. Try booting into Safe Mode and see if you still have the problems.
If not, then you have a third-party incompatibility.
If the problems still exist, I would suggest reinstalling. Lion had the same complaints. Many people fixed it just by reinstalling.
Others had to resort to erasing the drive and then reinstalling and migrating from Time Machine.
Others gave up and went back to Snow Leopard.

How do I get to the InDesign screen to begin testing this product out in the free trial?

How do I get to the InDesign screen to begin testing this product out in the free trial?

in ios 7 if you click the home button it takes you home. if you double click it it shows all the apps running in the multitasking bar. on ios 6 they looked like actual apps on ios 7 its the page of the app

Please help me test this problem with CSR4 and Flash10.

I have tested the below problem on 2 desktop and 2 laptop Windows systems with the same result. Would you please test this procedure and report whether you do or do not have the same results.
I am assuming that the systems you use are the latest with all updates installed.
1. Start Photoshop and open any image file. Click on the move tool and see that you get the normal tool cursor.
2. Navigate to http://www.layersmagazine.com/working-with-text-in-flash-part-2.html (uses Flash 10 as the tutorial engine).
3. The tutorial should start automatically. While it is running switch to Photoshop and verify you still have a move cursor.
4. Switch to the tutorial and click on the flash icon to watch it in full screen mode. Watch it for a couple of seconds. Press ESC to return to normal size mode.
5. Switch to Photoshop and look at the cursor. On the 4 systems I have tested this on, the cursor changes to a hand and remains a hand no matter what tool icon is clicked.
Sometimes closing the tutorial and Photoshop returns everything it normal functioning. I have reported this to customer service. Sometimes I have to reboot to cause it to happen.
I would like to determine if it just the 4 systems I have tested or if others experience the same problem. Thank you for your help.
Mike

That works! Thank you.
How did you know to try that and what is happening?
Mike

Cannot Test this Web Service using the Test Page

Hello,
I'm using
- JDeveloper 11.1.1.3.0
- SOA Suite 11.1.1.3.0
- Weblogic Server 10.3.3
- Windows XP SP3 (german version)
Now I'm having a BPEL-Process (SOA) Project created in JDeveloper and deployment to the server works fine, i.e. the service can be seen in enterprise manager.
But if I want to test the service using the webservice tester it get the following error if I copy the URL for getting the WSDL file to another browser tab:
Cannot Test this Web Service using the Test Page
Endpoint Name : FabricProvider (Service Description)
You can test the Web Service using a Java client.
Failed to Load a composite for composite identified by default/ReisebuchungService!1.0*soa_6aebb5fb-7830-497b-b853-839518d112f0
Please verify that the composite has been deployed.
Can you help me with this issue? I have no idea where to start debugging or resolving the problem.
Thanks in advance

Heya
others and I face the same issue, reported here:
TP4: Cannot Test this Web Service ...
Oracle is not too responsive on the issue though.... :(
Cheers Christian.

h:inputText value=" " onblur="test(this);" / What I can do with "this"

As there is no id for input text and I have to validate the input text.
I have looked some where onblur="test(this);" but don't know what "this" is in the argument in the test() and how can I use it in the script to validate input.
Thanks.
Roshan

this refers to the calling object itself, in your case the text field.
Your script may look like:
function test(obj) {
alert(obj.value);
//To do
Message was edited by:
MrsG

Preparedstatement - please test this code!!

I hope someone can test this code and tell me if it works. It seems to work on my computers (win98 and win2000, and access 2002 database, compiling etc,and even returns that it updated 1 record. But the database is unchanged. Commit is default to autocommit, what else could be causing this? None of the setxxx commands work. Yet no errors are given. Please test and let me know. Or, send me similar simple code that works on an access 2002 database from win98 or 2000. I am wondering if access 2002 has something to do with this. I am using default ODBC driver that came with the OS.
Thank you,
Jacques
import java.sql.*;
import java.io.*;
public class test {
static Driver d;
static Connection conn;
final static String jdbcDriver="sun.jdbc.odbc.JdbcOdbcDriver";
static String databaseURL = "jdbc:odbc:" + "dbtest";
public static void main(String[] args) {
try {
d = (Driver) Class.forName(jdbcDriver).newInstance();
conn = DriverManager.getConnection(databaseURL);
PreparedStatement stmt = conn.prepareStatement(
"UPDATE employee SET emp_id = ? WHERE Index = ?");
stmt.setString( 1, "John" );
stmt.setInt( 2, 2);
System.out.println("about to update");
int count = stmt.executeUpdate();
System.out.println("number updated=" + count);
catch( Exception e ){
System.out.println("Error:" + e);
Database: Set up access database with table employee at least 2 records, one field called emp_id, register it in odbc as dbtest

Ok, for anyone else that encounters this, I found the answer! After a week of very frustrating testing, I stuck in a close() to the connection, and the changes were then actually made. I had counted on Java to close them properly upon exit, but I must specify the conn.close() after the executeUpdate before they take effect. Another weird worm of Java IMHO.

When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging

Contexts: I am very competent with GFX and have worked on many projects.
When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging in the same render. It snaps again. I don't want to re-size from the canvas dimensions, I want to resize from the render's original dimensions.

Ap_Compsci_student_13 wrote:
ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long.

My Iphone 4S has far less battery life since before I downloaded IOS 7.1, Is there a bug in this IOS that wears the battery down faster?

Since I downloaded IOS 7.1 my phone (4S) battery won't last more than eight hours and takes three or four hours to charge. There must be a bug in this IOS that affects battery life.

Hi Smilesalong,
If you are experiencing shorter battery life you may want to read through this article to help you extend it -
Apple - Batteries - iPhone
http://www.apple.com/batteries/iphone.html
Thanks for using Apple Support Communities.
Best,
Brett L

MOVED: Power of the Press - Neo4 Bios Issue - Can Anyone Test This?

This topic has been moved to Overclockers & Modding Corner.
Power of the Press - Neo4 Bios Issue - Can Anyone Test This?

This topic has been moved to Overclockers & Modding Corner.
Power of the Press - Neo4 Bios Issue - Can Anyone Test This?

Battery running down fast using Yosemite, running the latest update 10.10.2. I think there is bug in this update. Please help me out or is there a way can i switch back to mavericks and how

Battery running down fast using Yosemite, running the latest update 10.10.2. I think there is bug in this update. Please help me out or is there a way can i switch back to mavericks and how

1. Check the cycle count of the battery against the rated life for your model. The battery may be due for replacement. If the power adapter is connected almost all the time, the battery may need replacing even though the cycle count is not too high.
2. Follow these instructions, or these for OS X 10.8 or earlier.
3. In the Energy Saver preference pane, uncheck the box marked
Enable Power Nap while on battery power
if it's shown (it may not be.)
4. You can also try resetting the SMC.
5. Make sure your system is up to date in Software Update.
6. Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

How quickly does the basic iMacMini connect to a Sling Media account and then handle streamed Sling Media content? Is it possible to test this at an Apple store?

How quickly does the basic 1.4GHz/4GB/500GB iMacMini load Sling Media New Watch application and connect to one's account? Is this iMac fast enough to stream a video stream of approx. 2MB bandwidth without buffering (assuming an adequate internet connection) ? Is it possible to test this on a display model at an Apple store in the UK?
Thanks for your assistance

You said " 1.4GHz/4GB/500GB iMacMini"
There is not such thin. There is the 1.4 GHz.4G/500GB Mac Min desktop computer.
iMac computers are ingratiated computers that includes the display.

Compressor 4.1.2 bug tested this is my finding.

Similar Messages

Maybe you are looking for