Compressor 4 insert DVD dialog box does not come up after rendering

Does anyone know what I might be doing wrong when after rendering a DVD project, the process looks like its finished rendering but the insert DVD dialog box never comes up. 
Very frustrating, but probably something dumb...
Thanks

Everything looks good in the Batch Window.
I'm guessing permissions or preferences, assuming it's not hardware.
Run Compressor Repair to flush things out…make sure the Trash Preferences box is checked.
Run Disk Utlity, select your boot drive and Repair Permissions.
If that doesn't do it, in Job Action, change output device to Hard Drive and se whether it will make a disk image.
Good luck.
Russ

Similar Messages

  • Save As dialog box does not gain focus (bring to foreground) with Windows 7?

    Hello,
    I've got several users with Microsoft Windows 7 (64bit) and Adobe Acrobat 9 Standard (OEM) with the same problem.  When you go to Print to your PDF Printer, the Save As... dialog box does not come to the foreground and gain focus.  Most often it just sits in the taskbar blinking to get their attention.
    However the users get frustrated and often don't realize the Save As box popped up at all.  They did not have this problem with Windows XP.
    I actually can replicate the problem on my own PC.
    Any workarounds for this behaviour?
    Thanks,
    -Tim

    This appears to be a Windows 7 focus issue.
    You can back up your registry and try the fix below, it worked for me.
    Fix number 1
    1. Open Start >> Run and type “regedit” (without quotes)
    2. Navigate to the following path:
    [HKEY_CURRENT_USER\Control Panel\Desktop]
    3. Right Click on the empty space and create a new DWORD value, or modify the existing value named ‘ForegroundLockTimeout’, set or modify the value to 0. (this value will cause the application to take the focus instantly.)
    4. That’s it Done, exit registry and restart windows for changes to come into effect.

  • Image src dialog box does not appear

    Hello,
    For some reason when I click the insert image button in
    dreamweaver cs3, the image src dialog box does not appear any more.
    It now just inserts <img src="" />. It used to allow me to
    choose an image, anyone know how to fix this? Thanks,
    Jasontor

    No idea....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "jasontor" <[email protected]> wrote in
    message
    news:go785j$ja0$[email protected]..
    > Anyone?

  • HDR Pro Merge dialog box does not appear. The layer disappear. What are the solutions?

    HDR Pro Merge dialog box does not appear.
    The layer disappear. What are the solutions?

    Hi Noel,
    Actually, I just checked my scratch disk available space and it says ot is over 1.7 TB!!  I am only using the C drive as my scratch drive, as that is my only drive.  Anyway, I appreciate your help! Still will not function properly.  Maybe I should try reinstalling Photoshop.
    Cheers,
    Russ

  • Ryanair 'flights' dialog box does not load; all the rest works, and in Opera it works; can you help? it seems everything else works fine

    Ryanair 'flights' dialog box does not load; I tried in other languages too, it is the same error; it works fine with opera browser in this very same computer I am writing in; please help, if you can; it worked up to two months ago, then I don't know, too long has past from last time I used ryanair, and the rest works all fine, it seems... thanks so much for your time,

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
    <br />
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br />

  • My project is set up with "rotation" menu intro, video, and then "rotation" on end, however, when you put DVD disc in DVD player, menu does not come up on front end, it goes straight to the video.  Is there some step I am missing?

    My project is set up with "rotation" menu intro, video, and then "rotation" on end, however, when you put DVD disc in DVD player, menu does not come up on front end, it goes straight to the video.  Is there some step I am missing?

    Open your iDVD project and go into the Map mode.  Made sure the autostart bin on the left is empty.
    Click to view full size
    If you find a video in that bin remove it, save the project as a disk image and check the disk image with DVD Player.  Then you can burn the disk image to disk with Disk Utilitiy at 4x for optimal burning.
    OT

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • MBP does not come back after hybernation

    Hello everyone,
    I am enjoying my MBP except for one problem. It does not come back after it hybernates sometimes.
    I hit a key, hear the superdrive do it's "thing" and then after much waiting (approximately over 10 minutes) no picture or video on the screen!
    I can tell that it's still powered on because it's plugged in and when I hit the Caps Lock key it lights on and off.
    The only way that I can get it out of this state is to hold down the power button, unplug the power cord, take the battery out, hold in the power button for 4 seconds, reinsert the battery and power back on.
    I have to then cycle the power back off because the first time it does not come back but I just get the blank white boot screen and no 'apple'.
    When I turn it back on the second time, it boots up.
    Anyone else have a problem with this?
    Thanks for listening!
    Mark

    Hello Gweedo!
    Yeah I have the same issue and am up to date. Apparently this is a pretty huge problem with the Macbook Pro since the last Graphics update after updating to 10.5.2.
    http://discussions.apple.com/thread.jspa?threadID=1394449
    I have been perusing through that topic and hopefully they will come up with a fix for this.
    The only work-a-round that I have found (but haven't tested extensively yet) is to disconnect to the wireless, turn off blue tooth, disconnect my external monitor and then go into sleep mode. Then it always comes back. But if I leave it connected to the wireless, bluetooth, and external monitor - it's a crap shoot as to weather or not it will come back up.
    This is pretty frustrating because half of using a laptop is being able to hybernate and sleep properly.
    I even have the 'smartsleep' installed.
    Thanks for commenting everybody!
    Mark

  • Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.

    Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
    I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
    Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
    I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
    I'm using Firefox 30.0 and Windows 7 (64 bit).
    Thanks.

    Hi moose53,
    Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
    If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

  • My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???,

    My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???

    Return it for a warranty replacement.

  • Dbca does not come out after 100%

    I have installed and configuredthe Oracle 9i Rel2 on RH Linux 9.
    When I followed dbca steps to create a database, it does not come out after reaching 100%. I had to kill the process to end it. What could be reason? Because of this the init<SID> file is also not created.
    Please explain
    Mehul Trivedi

    I have installed Oracle9i on RH9 and I was able to use
    the dbca and really If your swap values in the OS are fine
    I do know whatelse you can check.
    If you want to create a database and the dbca is not
    functioning you have another option ( Create it manually )
    Chapter 2
    Administrator's Guide Contents / Search / Index / PDF
    http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96521.pdf
    Joel P�rez

  • Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

    Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

    so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

  • The print window settings dialog box will not come up

    When attempting to print a website, I need to select the option to print as laid out on the screen as described in this how-to: https://support.mozilla.org/en-US/kb/how-print-websites#w_print-window-settings.
    However, I have attempted to get this dialog box to come up on 4 different machines that all have Firefox 32 installed and updated. The operating systems of the 4 machines were 2 Windows 7 64bit, 1 Fedora 20 64bit, and Windows 8.1 64bit.
    It appears that using the print button launches the print preview screen. Pressing CTRL+P does not open this page either. Is this something I need to change in about:config? I already reset all the printing settings and reset firefox on these machine to see if that was the issue.
    Please let me know how to correct this behavior.

    On Windows 7 and Windows 8.1 systems, it does not come up. I did try disabling the pop-up blocker, but it just won't load the dialog box. It is driving me a bit crazy.
    And Office 365 does put the email out to a new window, but it still has frames :(. Microsoft's support forum advised setting IE and other browsers to print as displayed. The issue is I can't seem to figure out how to get that dialog box to come up. I have tried disabling the native dialog box in about:config, but didn't have any success with that either

  • System does not come up after homogeneous system copy

    Hi there,
    after a regular system copy of our Java-only Portal the system does not come up.
    'startsap' warns with these messages :
    Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/ext/jdbdictionary/jddi.jar file stated but does not exist !
    Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/ext/antlr/antlr.jar file stated but does not exist !
    Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/system/frame.jar file stated but does not exist !
    and, yes , these really important directories do not exist - under /usr/sap/<SID>/JCxy/j2ee/cluster/server0 there is
    only ONE directory , which is 'apps' .
    database starts, but not the j2ee engine
    OS :Solaris 10, Oracle DB
    I'm confused (i did the system copy 2 times, because I did not believe what I saw ....)
    Regards,
    Ronny

    >
    Sunny Pahuja wrote:
    > Hi,
    >
    > Have you done system refresh with sapinst ?? was it successful or not ?? Could you please paste dev_server, std_Server and dev_dispatcher logs here ?
    >
    > Thanks
    > Sunny
    Hi Sunny,
    thanx for your answer.
    There are NO logs, either dev_server* nor dispatcher.
    the only thing I found were under the work-directory, the dev_jcmon says :
    [Thr  1] Wed Oct 27 11:01:40 2010
    *[Thr  1] *** ERROR => Can't attach to administration shared memory (rc = 3) [jcmonxx_mt.c 228]*
    and the bootstrap says mainly that it could not find the framework :
    [Thr  1] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr  1] JLaunchRequestQueueInit: create pipe listener thread
    [Thr  2] JLaunchRequestFunc: Thread 2 started as listener thread for np messages.
    [Thr  3] WaitSyncSemThread: Thread 3 started as semaphore monitor thread.
    [Thr  1] Tue Oct 26 10:00:01 2010
    [Thr  1] SigISetDefaultAction : default handling for signal 18
    [Thr  1] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr  1] CPIC (version=701.2009.01.26)
    [Thr  1] [Node: bootstrap] java home is set by profile parameter
            Java Home: /usr/java
    [Thr  1] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/SPE/JC51/exe/jvmx.jar
    That make 'sense', because there is nothing  it could find ..
    Regards Ronny

  • Printer dialog box does not appear in Photoshop CS.5

    I use Photoshop CS.5.1 with a Macbook 2013 using version 10.9.5. The printer works perfectly with all other applications but in Photoshop no printer dialog box comes up and the print job does not appear in the printers queue. Anyone the same issues?

    First, try nuking (deleting them and letting the application create new ones) your Photoshop preferences:
    To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
    Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
    Important: If you re-create the preferences by deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
    Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
    NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here.
    Mac OS
    Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If  you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

Maybe you are looking for