Compressor/Batch Monitor get stuck!

Hi,
Does someone know this problem?
Most of the time Compressor works correct, but sometimes (1 out of 5) it just get stuck, somewhere during the process. (only with audio)
Is there anything I can do against this?
Greetings,
Michiel
Powerbook G4 Mac OS X (10.4.3) -

Michiel,
Please post more information about your source files (format, lenght, etc) and the encoding preset you use.
That way more chances someone with similar jobs can help you.

Similar Messages

Batch monitor doesn't launch and doesn't exist at all :(

Hi,
I desperately need your help.
My problems started a couple of months ago when a less than 2-hour project in Final Cut was converted by compressor into a 6-gig file.
Following basic troubleshooting steps described in FAQ, I deleted user preferences and the program went back to normal.
Yesterday my 1 hour and 30 minutes project was converted into 5 gig file. My troubles started all over again. This time I also tried to delete user preferences but now it DIN"T WORK.
I decided to remove and reinstall compressor and Qmaster following by the steps described at
http://support.apple.com/kb/TS1888?viewlocale=en_US
All went well, BUT now when I export my project using compressor, batch monitor doesn't launch! And when I look into Applications->Utilities I don't SEE THE BATCH MONITOR program at all!
Maybe I have not installed the entire thing necessary for normal performance of the compressor application? (when I reinstalled compressor, I checked Compressor and Qmaster boxes only, and unchecked final cut pro, DVD studio pro and the rest of the applications I did not need to reinstall)
Please advise.
Regards,
Tatiana
P.S. I'm using FCP 5.0 not the newest FCP studio 2.0

Thank you for your reply!
Still trying to figure out what's going on.
I checked the option it IS on. Thank you for your suggestion, though.
Regarding Batch Monitor as a separate program, yes I know that I should look for it in the UTILITIES folder. But it is NOT THERE! How can it be possible if I reinstalled Compressor AND Apple Qmaster?
Any thoughts?
Maybe I did or did not delete some file(s) before the reinstallation? What should have I done before plugging in the installation dvd with the Final Cut Pro 5.0? I followed all steps described in the basic troubleshooting section on the Apple web site. Ironically, I got into even more trouble
I appreciate your help.
Message was edited by: VestaGirl
Message was edited by: VestaGirl

Deleted batch monitor accidently, do I need to re-install compressor to get it back?

Someone moved my batch monitor application to the desktop and didn't tell me. I saw it, thought it was just a shortcut, and chucked it in the trash and emptied it. Now, I've got no batch monitor. Do i need to re-install compressor to get batch monitor back? I've tried putting the install disk in and trying to re-install just batch monitor but theres no option for that in the install. Anyone know?

YES... Easiest way is to remove Compressor/Qmaster first. Use this free program for removal:
http://www.digitalrebellion.com/blog/posts/how_to_reinstall_compressor_and_qmast er.html
Reinstall Compreesor and Qmaster from you install disk.

Batch Monitor and Compressor do nothing when I submit...

Hey, guys,
I've re-install the whole OS and Final Cut Studio 2,
I use Compressor to encode my video clip,
after setup the format and the destination,
I click the "submit" Button, the batch job send to Batch Monitor,
but Compressor and Batch Monitor do nothing, the status bar didn't run.
Compressor's CPU usage is only about 0.x %.
Any body have the same problem?
How to solve this problem?

hi Thomas!
I have norton 2005 and turned it off when I downloaded itunes and I get the same result. quicktime will open for me however.
NIS 2005 is the usual suspect with "symptomless launch suppression".
first try:
b noir, "itunes wont open" #6, 02:11pm Oct 3, 2005 CDT
... but if no joy with that, try:
Lorraine M, "NIS/i-tunes problem rectified" #2, 01:51am Oct 17, 2005 CDT
keep us posted.
love, b

Compressor Batch - will NOT open batch monitor

i had to reinstall my friends FCP/Compressor/DVDSP (he didn't want the other stuff)
but now when we try to export a file from compressor to a dvd file such as dolby audio
we get an error saying "unable to connect to background process"
any ideas? maybe we need to install something else?
i did notice (at least i think) batch monitor was in the applications folder and now its in utilities
maybe thats the issue?
any ideas i can give him so we can continue to work on some stuff
thanks

Batch Monitor is meant to be in Utilities, so that is fine.
Try these steps (I assume you are using Compressor 3):
http://www.digitalrebellion.com/blog/posts/compressorerror_unable_to_connect_to_backgroundprocess.html

Multiple Compressor/Qmaster problems...clusters and batch monitor launch

Hi All,
I am continuing to have problems with Compressor and Qmaster. My original problem was that I was trying to create clusters to speed up my workflow. My computer is the only computer in the network. The issue came up when I created a cluster and it would work fine if I dragged in a QT from outside FCP to process in compressor, but if I tried to export a QT from FCP to compressor it would fail. Yesterday as I was about to leave work I was trying to export stuff through compressor and the batch monitor wouldn't launch. Sometimes I could get it to, but the QT it was exporting would disappear once it was processed.
I've deleted the compressor/FCP prefs and I also tried reinstalling compressor/qmaster. I trashed all the files I was supposed to and it couldn't get rid of all of them because it said they were still in use. AHHH!!!! I'm getting a little frustrated. I called apple and in so many words, they said, "Well, that's what happens with Studio 2. Try reinstalling it."
Help! I'm on FCP studio 2.

As mentioned in other threads, virtual clusters are very tricky to setup properly and, unless you're doing a lot of H.264 encoding there's almost no benefit in doing it.
I highly suggest that you (and anyone struggling with VC's) pick up a copy of "Compressor 3 Quick Reference Guide, Brian Gary" and get a solid understanding of the environment VC's create - and what they're really good for.

Going to Compressor from FCEHD - file won't show up in Batch Monitor

Hello all: I am trying to export to Compressor from FCEHD, I am using compressor that came with DVD Studio Pro 2. On my iMac G5 flat panel it will not work because of the PCI card, so I found a work around on the discussion boards and it said to hit escape and go into compressor since I needed an AGP card.
Well I do that but the file is not in the compressor. The Batch Monitor is empty. How do I get the file into the batch monitor? What kind of file goes to the compressor normally? Is it just an FCE file? I have a lab full of computers doing the same thing.
I hope there is a fix, thanks for your time.

Hi:
I don't have FCE but most probably this FCP workflow works:
You can export your timeline as QuickTime Movie, current settings (self contained if you have disk space!) and drag and drop that movi into Compressor.
Hope it helps!
Alberto

Compressor 4 files not showing up in Batch Monitor

Appartenly Batch monitor doesn't work with compressor 4. Using a droplet and I can't monitor the progress. Any thoughts?

Batch Monitor got replaced by "Share Monitor".
Two ways to start monitoring:
1. check the "Automatically launch Share Monitor" in Compressor 4's Preferences
2. Nagiate intoi the Compressor 4 Package and there to /Contents/PlugIns/Compressor/CompressorKit.bundle/Contents/EmbeddedApps and start Share Monitor from there
Either way I recommend to stick it to the Dock once you've opened Share Monitor successfully.

Doc getting stuck on second monitor

On occassion my doc gets stuck on my second monitor even if my main monitor is the active display. Anyone else having this issue? Any way to disable the Mavericks new dual display feature?

hands4 wrote:
You can revert to the to the way multiple screens worked on Mountain Lion.
System Preferences > Mission Control > Uncheck Displays have separate Spaces.
You MUST log out and back in for the change to take effect too... A lot of people miss that step.

Batch Monitor Does Not Show Compressor Jobs

On one of my systems, Batch Monitor is not showing current compressor jobs, even though the jobs are running in the background -- and running and completing successfully. On the other systems, all jobs are shown in Batch Monitor as they are being compressed.
All processing is done on the local machine (no clusters). All jobs are submitted using the Compressor application....the jobs are basically conversions from one codec of QuickTime to another.
I saw a post regarding this issue, but it didn't appear to be resolved. Any suggestions?
G5 Quad Mac OS X (10.4.6)

So...guess what I learned?
How many cables do you have plugged into your monitor? The set came with a white and blue, and I plugged both in. Apparently, this causes the issue as the two cables are intended to provide dual screens.
Unplug the blue cable from both the computer and the monitor, and then press the "Windows" button with the letter p at the same time. Make sure "Computer only" is selected from the pop-up window, and press enter. This, according to an HP support tech, should fix the problem.
The instructions should make it more clear that both cables are not to be plugged in to a single monitor, but this may also be common sense to people who have experience with dual monitors.
I have not yet left my computer unattended to see if this fixes the problem, so let's keep our fingers crossed.

Compressor gets stuck and task bar doesn't progress at all

I have set the settings I want compressor to do but, it gets stuck from after I press submit. Task bar doesn't "progress" and, all the jobs are in "waiting"
Any ideas Anyone ?

I had a similar problem and Digital Rebellion's Compressor repair did not help but their FCS uninstaller did.
You will need all of your FCS discs because there are many shared elements related to Compressor and Q Master. It took a few hours but after I did this Compressor was back to normal.

Reinstalled Compressor, where's Batch Monitor?

Good Morning, I just finished reinstalling FCP Studio, and was wondering where batch monitor is located, or where can i downloaded from. I have not yet updated (still runnning Compressor 2.0) I have read that it comes with Compressor and Apple Qmaster, can anyone help me find this?
thanks for your time.

Batch Monitor is located in your Utilities folder (within the Applications folder).
Is this FC Studio with FInal Cut Pro 5.1?
DId you install the the full FC suite, all the applications?
If you upgraded from a previous version of FC Pro with an earlier install of Compressor you should read this:
• Compressor 1.x settings do not work with Compressor 2

Batch monitor with Compressor 3 does not say how long compression will take?

It seems to me that Batch Monitor no longer says how long compression will take.
Am I missing something?

I thought I had Compressor 4, but it's 3.

Batch Monitor - No Progress

I've read on these boards that there are problems submitting batches in 10.5 with compressor 3.0.2 - which is what I'm running. My problem is slightly different...I am able to submit a batch and call up the batch monitor, where the job is listed as "processing" - but the progress bar never updates - and I've let it run on a short clip for WAY over the time that it should take and it never completes...I've already deleted compressor, trashed the prefs. and re-installed...any ideas or am I seriously just stuck until Apple gets their act together and fixes this?

For the most part Apple doesn't monitor these discussions. Report the problem to the feedback page:
http://www.apple.com/feedback/compressor.html

Submitted tasks not appearing in the batch monitor

In other words Compressor seems to be totally useless after the update.
I select my preset, and the destination, I click submit, I get the little popup with the name, cluster and priority options, I click submit, and then nothing happens. Nothing at all. Nothing appears in the batch monitor, just nothing.
A little "last submitted at.." appears at the bottom of the upper window, but that's it.
Can anyone please help? Compressor was working so well before the update...

OK, now I've noticed something else. When I submit, the batch instantly fails.
If I open the batch monitor I can click on the failed files, revealing this fault: 3x INVOKING METHOD OR ACCESSING MEMBER FOR NULL REFERENCE

Compressor/Batch Monitor get stuck!

Similar Messages

Maybe you are looking for