Compressor/BatchMovnitor won't stop even after file has been removed?

I was trying to compress a 12 minute FCS file and it said it would take 1200 hrs. so I figured I'd better stop and try again. I hit Cancel in Batch Monitor but it kept going anyway, so I quit and re-started and the same file showed up again even though I didn't place it in a new batch or anything. I deleted the preferences for Compressor and BatchMonitor and re-started and it still shows up - says it's "canceling" but never cancels. How do I stop this from happening and get rid of it?

In classiclly typical fashion , immediately after posting (after searching compressor topics) I searched under Batch Monitor and found a bunch or similar problems. The answer came by deleting a file from the Qmaster folder. Now it appears to be working "normaly" again.

Similar Messages

Audio from video clip comes though even after it has been removed

I have detached audio from my movie clips and they still come though on some clips after I share to iDVD. I then muted them and they come through, I then just move them to 0 volume and they still come through. It was working in iMovie and then when I shared it would come through. Only after I shared. Now it is happening in iMovie. I have spent days on this. Any help would be grateful.

Yes, on the speed slider you will see tick marks at the presets. I think they are 25%, 50%, 100%, 200%, 400%, 800% but there may be some more.

Format address panel in iCal to show Department from the address book. At the moment it is showing 'Job Title' even though that has been removed in Address Book.

Can anybody help please How do I Format address panel in iCal to show Department from the address book. At the moment it is showing 'Job Title' even though that has been removed in Address Book.

I have a similar problem. I actually spoke with a Paypal customer Representative a few months back who informed me that they had deleted all of my previous *Hidden* Address but when I just purchased an item today on a online merchant's site that I had never been to before and checked out using their Paypal option, I noticed that my default shipping address was in fact my old address and when I went to change the address to my current address, I noticed all of the old addresses I ever used were still there. I've just spoken with 2 separate paypal representatives who confirmed on their end that all of the old address have been deleted and the only one they have on file is my current address. Can anyone provide me an explanation as to why the old hidden address can still be showing up when I check out on merchant's sites using paypal even after they've seemingly been deleted? The last Representative suggested clearing out my browser's cache, but I don't believe that will resolve my issue. Thank you in advance.

Unable to initialize Photoshop because the preferences file has been removed

Hello
After a week without using photoshop, I can no longer open it. As soon as I try this message appears: "Unable to initialize Photoshop because the preferences file has been removed."
So, I went to look for this preferences file that I've never deleted and I can't find it.
I tried to reset photoshop with keyboard shortcuts preferences, it does not work. I also uninstalled and reinstalled the software, it does not work either.
What else could I do ...?
Thank you for your help.

lola.marceau wrote:
I tried to reset photoshop with keyboard shortcuts preferences,
Seems odd that such a problem would crop up on its own. That kind of sounds like a registry or permissions problem. What other things did you do with the computer between the time it worked and it didn't?
And if you're willing to uninstall / reinstall to try to recover operation, it might be prudent to try the Adobe cleaner tool to really be sure you've uninstalled everything...
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
-Noel

My company email is starting to save numerous drafts of the same email even after it has been sent

Earlier today my company email (set-up in Mail) started saving numerous drafts of emails even after they have been sent out? Any idea why this is-I have talked to the service provider and they have led me to believe it is an Apple issue

There is no anti-malware for iOS, at least none that actually does anything useful. The odds of getting any malware infection via an email attachment on an iOS device is quite low - practically non-existent. Unless you are seeing any issues, there isn't much to do, other than deleting the email and being more cautious in the future.

Apple TV is requesting payment verification constantly, even after it has been confirmed multiple times, why will this not stop?

Apple TV has gone off the deep end and is constantly asking me to re-verify my paymetn info... I do it time and time again and the message never stops. It pops up alomst anytime I do anything... When I first got the apple TV I only had to do this occasionally... Now it asks multiple times a day... Any idea on how to make this stop??? To the point that I will start using another streaming device soon...

I have been able to eliminate the Verification Required problem. I believe the thing that made the most improvement happened to be an OS update on the Mac where the home share lives, but it might also be the combination of trying many fixes. The Mac was already running the latest iTunes (10.7), but the my OS (OS X Lion, 10.7) was not patched all the way up to 10.7.5. I am not running Mountain Lion. My Mac is a Mini, 2 GHz Intel Core 2.
I applied the OS patches, after having changed my AppleID password (more complex) and payment method back and forth, and now with all of that done, the Verification Message has gone. I do, still, have the ATV saying it can't connect to the iTunes store frequently, but that message is not as frequent and as annoying as the constant Verification Required message. Note that my ATV showing the error message about "Can't connect to iTunes Store" is on Ethernet and I believe that there is a bug with the ATV update that pertains to Ethernet connectivity which is discussed in the Support Forums on other threads (one I can recall is MLB TV not working, look for MLB, Update, and Ethernet if you want to find that).
Summary of my personal experience to arrive at a fix for Verification Required:
iTunes on host Mac is up to date (10.7)
AppleID password is complex enough (it previously was not)
Payment method was changed away to another method and then re-established, re-confirmed to my Visa
Mac OS Lion was updated to latest patches, 10.7.5
Also, for what it's worth, my Mac is also on Ethernet and my switches are all new Linksys GB switches with the exception of my Linksys WiFi/Router which is only "switching" for WiFi users and connections off of the LAN to the internet.
Best of luck to all, here. This has been terribly frustrating, and lacking any official Apple participation or even clear, cut answers from the user community. I hope my experience helps someone. You may also contact me directly at my first name at my lastname dot com.
Sincerely,
Chris Adragna

It is remebering login info even after it has been deleted and cookies removed.

The newest version of Firefox is remembering login information even after I have removed it and all associated cookies that I can find from every known location. How do I stop it from doing this.?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Downpayment is not clearing even after invoice has been fully paid

Good day to everyone,
I am currently having an issue with a down payment not clearing even though the invoice has been fully paid. to my understanding, once the order is fully invoiced- down payments should be cleared as well, am i correct?
The order related billing's status containing the down payment is set to "fully invoiced", yet when i view the document flow containing the down payment, it states "not cleared". What could be the problem? Could i just manually release the down payment? thanks in advance!

hi
if you are doing vendor manual payment program then you clear down payment as below.
T-Code-F-44 Clear down payment
Select special gl indicator
then press enter and clear down payment against invoice.

Material goes straight into 'unrestricted' even after QI has been setup

hi SAP gurus,
QI has been setup for this material, in the PO and also MIGO goods receipt, stock type has been defaulted to "QI" as well.
however after the GR has been posted and i checked MMBE, the stock went straight to "unrestriced".
how to i know if there's any user exit or setup in the QM that causes this?
thank you very much.

Hi,
Were you able to get an inspection lot for this GR? Is the Q-info record maintained for the material?
This could be another reason besides the 'Post to Inspection stock' activation.
ntn

AE CS 5.5 info boxes stop appearing after App has been up for ~30 min

I've encountered a strange behavior with 5.5(up to date according to Adobe) running on MacPro 10.6.6. After having the program launched for a period of time (over 30 minutes) all info panels that might pop up indicating an error in an expression, missing footage, a missing font or effect, even basic "about" info for an effect, just stops functioning. Quitting AE and re starting restores this function, but only for a period of time. Its not the end of the world, but it can be frustrating. Anyone else encounter this?

Hey Todd,
I have not noted this issue within Premiere, but I will check more closely (plug in info boxes etc) . Its really an issue with debugging expressions which don't happen within Premiere so it could be an issue and I am just not noticing it there.

S2disk stops working after laptop has been on for a day or two

Hey,
Running s2disk usually works flawlessly. However, I've discovered that after maybe a day or two, or three of the laptop being on (being put into a hibernate whenever I travel) hibernate stops working. There will be no error message on the screen when it runs, neither will there be any errors that I spot in /var/log/messages or /var/log/pm-suspend.log if I try pm-hibernate.
What happens is the screen goes blank and starts showing the s2disk messages, then it says that it's compressing the image, then it just pops up into my normal desktop environment.
The only difference I've seen on the screen between a successful hibernate and a non-successful hibernate is that the non-successful one never says "compressed image to ..... "
Thank you for your time
Edit: On a similar note, which may help to solve this, a similar thing happens when I s2ram (although they don't coincide - right now I can s2ram but not s2disk). When I s2ram it works but immediately wakes up without me moving the mouse, hitting a key, etc.
Last edited by pdexter (2012-10-02 20:11:48)

Hello Albert, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

Bridge does not mark thumbnails with icon after file has been worked.

I use Windows Vista and process photo files in Bridge using the latest Camera Raw plug-in and Photoshop CS2. Bridge does not mark each thumbnail with a icon as it should after processing. I use the same PS program on another computer using Windows XP and Bridge does mark each thumbnail with an icon. Why will Bridge not mark each thumbnail with an icon as stated in the PS manual on my Vista computer?

I use Vista and CS3, Bridge marks my RAW files when changes are made. Check to see if you have different settings in Bridge between the 2 computers. PS is not supported by Vista Basic.

Adobe X Standard cannot load/create EuroRoman.ttf font after file has been created using AutoCAD LT 2015. File was loaded and refereneced with Distiller X. Font has been installed to Win7

Need suggestion on how to get Adobe X to create/load the font. Others in the office can create the same Adobe file with no issues. Help please.

You have the required Xorg drivers and those errors appear to be expected (https://www.virtualbox.org/ticket/4789). As a matter of fact, Xorg is terminating successfully. Just to make sure, is your ~/.xinitrc setup correctly?

Having issue viewing purchases done through one Apple TV, on other Apple TV's, even after it has been downloaded to the synced I-Tunes shared account.

Having a problem accessing movies purchased on a Apple TV by other Apple TV's.
I downloaded the purchase to the computer that is used to sync to all my Apple Tv's.
Still all the other Apple TV's give me a...go to authorized the computer in order to watch this content...
I have verified a number of times that the computer is authorized.....

The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

Is a reinstall necessary to fix possible corruption, even after BSOD has been resolved.

My question is a little strange, and I am having difficulty getting a straight answer through search engines, so I thought I'd go straight to the source. I just built a budget gaming PC and I was having issues with my video driver causing BSODs while playing
Far Cry 3. I resolved the issue by reinstalling my drivers and my game. BUT, I wanted to know: Just because I've fixed my original BSOD errors and my PC is now working fine, is there a chance that future data corruption can happen as a result of the BSODs
forcefully restarting my PC? If so, I plan on reinstalling as a precaution.

Mistabla07,
If you’ve resolved your driver issues and everything is working properly now, you shouldn’t run into any related errors down the
road. With that being said though, it can’t hurt to go ahead and look for any other errors that might be existing.
In order to do this:
Press your Windows key and X simultaneously.
This will bring up a menu with administrative tools you can choose from.
Select Disk Management.
Highlight your C:\ drive by clicking on it.
Right-click on your C:\ drive and select Properties.
Go to the Tools tab.
This will bring up a tab that has the options for error checking and also to
defragment and optimize your drive.
Click on Check under error checking.
This will scan your drive for any errors and also repair them.
I hope this helps.
Mike
Windows Outreach Team – IT Pro

Compressor/BatchMovnitor won't stop even after file has been removed?

Similar Messages

Maybe you are looking for