Compressor Can Not Connect To Back Ground Processes

Anyone know how to resolve the error "Compressor Can Not Connect to Background Processes". I would attempt to reinstall only Compressor but I can not find it as a stand alone app on my Studio 5 Install Disks and I don't want to have to reinstall all of my FCP Studio apps.
Any ideas?

Hi:
Read this links:
UNABLE TO CONNECT TO BACKGROUND PROCESS
http://docs.info.apple.com/article.html?artnum=93234
What version of FCS do you have? HAve you installed Shake?
Alberto

Similar Messages

LQ02 Transaction not work in Back ground processing

Hi
LQ02 transaction working well in forground process but not working for background process. I did the bdc and use call transaction to post WM-IM transaction.
screen input as follows :
Warehouse number
Storage type
Storage bin
WM movement type
Storage Unit
batch job shows sucessfully completed but category stock status remain unchanged (ie quality to unrestricted.)
Any body know the alternative function module or bapi to post LQ02 transaction.
Appriciate your help.
Best regards
Pravin

when you run LQ02 in foreground, do you select anything manually or can you just hit save an everything is done?
What does job log and spool file tell you?
Did you flag the box for create mail in case of an error?
check OSS note 489286

Movement type 311 is not planned in Back Ground Processing

Hello,
I have created a BDC to run the transaction "MIGO" with movement type 311.
Its working fine in foreground. But i execute in Background i am getting a error message "Movement type 311 is not planned for this operation".
I think there should be some config settings. But i don know where to check configuration ?
If anyone has any sugggestions or answers , Pls post here.

Hi,
Better you can use the BAPI "BAPI_GOODSMVT_CREATE".
Check with your Functional Consultant for this issue......
You may also look for an OSS note and in Last raise a ticket to SAP..but there is no surety that every txn will work with BDC in Background Mode.

I can not connect my i phon with my pc it shows athorised computer when i am trying to do authorised process the process done but again i connect my phon again show this errore please help me to solve my prob....

i can not connect my i phon with my pc it shows athorised computer when i am trying to do authorised process the process done but again i connect my phon again show this errore please help me to solve my prob....

I have clicked on the connect button, but it brings up the same There is a problem connecting, and I have also tried SMB://
i tried pinging the ip address with in termial and it times out.
From my windows PC and I can access my MacBook Air just fine,

Laserjet Pro 400 MFP M425DN Can not connect to HP Web Services

I have a Laserjet Pro 400 MFP M425DN printer on a network running windows 7 and we Can not connect to HP Web Services. When we use the display on the menu it comes back with error "Internal Processing error, try again or check firmware update" We installed the new firmware but still get the same message. IF type in our printers IP address into our browser we get the info on our printer but if we go to the HP web services tap and click enable it trys but come back with a "connection error"
Any ideas?
Thanks
Paul

I just updated my Firmware on this printer today to the latest version dated May 3 2013 and Web Services
worked. Had the same type of problem you had for months and had worked with HP but could never get
Web Services to work at my location with my Modem/Router.
Had tried at other locations and it would work with the old Firmware. But for some reason it did not at my
location with the Modem/Router I was using.
Again the latest Firmware fixed it. I tried all the other solutions that I had found on the internet and non of them worked.

Back ground processing of the LDAP

Hi,
We are on XI3.1, SP2.
We are using LDAP authentication.
We wants to know the back ground processing when a using login to the deski using LDAP authentication.
Any one please help on this.
Thanks in advance.
Thanks & regards,
Collin Powell.

When logging with client tools the LDAP logon will be sent from the client, then the username will be authorized by the CMS which will in turn send a number of queries to the LDAP server to verify group membership. The variables include, graphtimeout (set or not) version/patch of BO (this behavior is different in 3.x vs XIR2 and even different in XIR2 SP2 vs SP4.
If you are not using SSL then all the traffic can be packet scanned using a tool like Micr4osoft netmon or wireshark.
Regards,
Tim

Regarding back ground processing for excel.

Hi,
i want to create the Excel sheet and i want to save in Back ground Processing....
give me some suggestionss.......................

This can create any file (spreadsheet/plain text/ dat files). but to add workbooks to the sheet you need to use OLE Object concepts.
PARAMETERS:    p_terms(256) TYPE c OBLIGATORY,
            p_del(1)     TYPE c OBLIGATORY DEFAULT cl_abap_char_utilities=>horizontal_tab.
DATA:       lv_str       TYPE string,
      lv_char(256) TYPE c,
      lr_descrref TYPE REF TO cl_abap_typedescr.
FIELD-SYMBOLS: <comp> TYPE ANY.
IF itab IS NOT INITIAL.
    OPEN DATASET p_terms FOR OUTPUT IN LEGACY TEXT MODE .
    IF sy-subrc EQ 0.
      CLEAR : lv_str.
Header of the file
      CONCATENATE
        'Action'
        'Name'
        'EE User ID'
        'Termination Date'
        'Last Day Worked'
        'End Of Notice'
        'Employee Type'
        'Department'
        'Department_type'
        'Office Location'
        'Manager Name'
        'Has Cellphone'
        'Has Home Office'
        'VP and Above'
       cl_abap_char_utilities=>cr_lf
      INTO lv_str SEPARATED BY p_del.
      LOOP AT itab INTO ls_terms.
        WHILE sy-subrc EQ 0.
          ASSIGN COMPONENT sy-index OF STRUCTURE ls_terms TO <comp>.
          IF sy-subrc NE 0.
            EXIT.
          ENDIF.
          lr_descrref = cl_abap_typedescr=>describe_by_data( <comp> ).
          IF lr_descrref->type_kind = 'P'.
            WRITE <comp> TO lv_char DECIMALS 2.
          ELSE.
            WRITE <comp> TO lv_char.
          ENDIF.
          SHIFT lv_char LEFT DELETING LEADING space.
          IF sy-index NE 1.
            CONCATENATE lv_str lv_char INTO lv_str SEPARATED BY p_del.
          ELSE.
            CONCATENATE lv_str lv_char INTO lv_str.
          ENDIF.
          CLEAR: lv_char.
        ENDWHILE.
        TRY.
This statement passes the content of data object to the file specified
            TRANSFER lv_str TO p_terms.
          CATCH cx_sy_file_authority .
            FORMAT COLOR 6 ON.
            WRITE:/ 'No authorization to access the Term file'.
        ENDTRY.
        CLEAR lv_str.
      ENDLOOP.
      CLOSE DATASET p_terms.
    ENDIF.
ENDIF.

BDC is not working in back ground

Hi all,
I have created bdc for F-51 but it is not working in back ground (mod N) and it is not showing any error in error tab , but it is working fine in mod A & E .I tried with mod P and using CTU_PARAMS but no use..
I have tested my recording in SHDB , in SHDB I have assigned session ,
And I executed that session in SM35 .
In SM35 I given processing mod foreground and error mod both are working fine but while trying in Background mod it is showing below error
u201CThe difference is too large for clearingu201D
How can I resolve this problem?

Hi Rakhi,
The error which you are getting u201CThe difference is too large for clearingu201D will come if the DEBIT AMT - CREDIT AMT <> 0. So the document which you are trying to select is either not there on the list or it is not getting selected while running in background. If it is not getting selected them the reason may be of you screen resolution, have you selected Default Size while recording ? and have you passed the same to CTU_PARAMS.
Thanks & Regards,
Faheem.

HT1430 How do I fix my locked IPad that can not connect to ITunes

My IPad is disabled with a passcode on it and I can not connect to ITunes like it is telling me in order to reset it. How do I get back into the IPad to fix this problem? Also, I don't remember the passcode. It is from my IPad 1 and I am trying to fix it for games for my 5 year old son.

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Can not connect outside of Lan to with rtsp PVC2300

I have the following cameras set up at my office
1 - PVC2300
2 - WVC54GC
3 - AXIS 225FD
I have a BEFSR81 Router
I have a computer on Windows XP running the surv software to record. Everything with that is good.
I also have 2 desktops.
I have been playing around with the rtsp feed with the pvc2300, but have run into a few problems.
1(a). I can not connect outside of the LAN with RTSP with either the VLC player or quicktime. It connects and asks for a password and then just hangs.
The PVC 2300 local address is 192.168.1.102 with ports 554, 5000-5010, and 6970-6999 forwarded on the router. What am I missing?
1(b) I can successfully connect with my blackberry bold, although when I try to change the default port (554) to something else (I would like to RTSP my the AXIS camera as well, so I will need a different port) it connects on my bold, but then says server is unresponsive. What am I missing here?
2. The voice with the PVC 2300 using http outside of the LAN (internet) lags quite baddly and is choppy. This happens without fail when I have all 4 cameras running, which I understand is upload bandwidth problem. But it also happens when I connect to just the PVC2300. I do have a connection to all 4 cameras inside the LAN to the XP running the surv software, but that is it. Is the my router acting buggy? I have unplugged the router for 5 sec, and it fixed it for a while, but it always comes back. I have donwloaded the latest firmware for the router and PVC 2300 and that didnt seem ot fix it either. Suggestions?
3. This is more of a question. I know the mobile streaming of the PVC 2300 does not include voice. Is there an app or way that I can just get it to my Blackberry. Even if I didnt get the video, voice is sometimes more important to me.
I hope Ive been clear enough in my description, Im very self taught (google is amazing), but I am in no way a techy.
Thank you in advace for your help.
Colin

Glad to hear you are successfully using the SWVMS16. That program is really cool and useful. I just cant tell you how that model of Linksys Router can work for you here (that is not a model we support on this community as its not small business)
Regarding RTSP access, are you also including the mobile.sdp in the URL?
RTSP:///mobile.sdp I noticed in the camera GUI with the newer firmware, you can specify an access code under mobile settings after checking the enable mobile streaming box. That word may be what you have to include, so check that too...
Try this locally first and then remotely is the easiest way to see if you got it right, then it just becomes a routing or firewall issue to figure out.
But your forwarded ports look right and should be opened.
Under advanced settings, you can define an alternate HTTP, HTTPS or RTSP port

I can not connect to iTunes on my pad or phone. No error message just says I can't connect. Can anyone help. I have tried turning it off and both are fully up to date

I Got an iPad air 2 yesterday and had no problems downloading apps. The pad has been synced to my phone. Today I am unable to download apps on either devise Tried logging out of iTunes on both but now can not connect to iTunes and do not receive an error code.

Thank goodness it's not just me. I also have tried everything from previous forums and nothing works. I logged out and cannot log back in. Even changed password to no avail. How can we find out if this is an Apple problem.

TS1368 I can not connect to the ITunes store. I have updated my apple ID and made sure that everything is set correctly. However, I can not purchase or update any apps no matter what I do. My partner has the same phone and hers works perfectly. I'm not su

I can not connect to the ITunes store. I have updated my apple ID and made sure that everything is set correctly. However, I can not purchase or update any apps no matter what I do. My partner has the same phone and hers works perfectly. I'm not sure how to sort this out. Please help
Thanks
Andy

I've been having this problem for weeks and have found no solution to it. There are lots of other people with this issue too if you look back on the boards. I even e-mailed AND called Apple and have had no luck. I tried all the suggestions they gave me and all the ones I found on here- nothing worked. I even uninstalled and re-installed iTunes (boy was that a pain!) and no difference.
The weird part is that I have an old laptop that works and if I buy music with the laptop I can download it with my regular computer buy buying does not work on my regular computer. That tells me it's not a connection issue. I can't get to my account either.
I can't figure out why an issue that has kept so many people from purchasing a product has been ignored!

Ipod touch 1st generation says "can not connect to itunes store" when trying to get free apps. we have a new computer and i downloaded the newest version of itunes...please help

I bought my son a 1st generation Ipod touch off of Ebay. We set it back to factory settings and downloaded the newest version of itunes. Whenever he tries to download any apps it says "can not connect to itunes" I have checked the wifi connection and that is working (he can get on safari) and we have the newest version of windows. He was so excited to finally get his first Ipod and now cant do anything with it...please help

Try here:
Can't connect to the iTunes Store
What iOS is on the iPod (Setings>General>About>VERSION)?

Can not connect to wireless network any more, missing command

I can not connect to any wireless network. I have been having this problem for days. In desperation I installed 10.4 in a seperate HD. I clicked on the airport icon in the upper tool bar, selected my network name and clicked on "open internet connect" and I was connected, what?? I rebooted into 10.5 and tried the same thing again. But the panel that opens when you click on the airport icon has NO "open internet connect" command. A couple of weeks ago I reinstalled my OS. I have run diskwarrior and Techtool pro. Thinking back to the time I first installed 10.5 I don't remember ever seeing that command. Is Leopard compatible with the airport card? How do I get my "open internet connect" command back??

It sounds like a problem between hardware and software. When you select your network, does anything freeze or does nothing happen?
Nothing happens.
Try this, open your Network Preference Pane, turn off airport off and delete the Airport connection by selecting "Airport" in the left pane and click the " - " button. Click on the "+" sign and create a new Airport connection. Hit Apply if it is available. Turn AirPort on and try to select your network and login if you can. The status should show Connected and an IP address should show up after of a couple of seconds.
I get "AirPort has a self-assigned IP address and may not be able to connect to the Internet". On a couple of occasions (over the last couple days) I got you are connected to the internet on IP 172.17.90.251. However when I tried to open a web page I got the banner you are not connected to the internet. Strange, the pref panet said I was the Safari said I was not. Certainly the IP address does not show up in a few seconds. I also have ComCast cable but I need to use the MetroFi-Free wireless so my wife has the bandwidth to do her company work using VPN.

HT201401 since iSO 7.02 update bluetooth with my car is no longer working at all. also can no longer access my mail! the browser is turned off and I can not turn it back on!!!!!

last week my phone was automatically updated after a trip to Europe, now I can no longer access gmail because the browser capability for cookies has been turned off and I can NOT get it back on. Before the trip bluetooth was on partially working with my car and now since the newest update works no more in any form. Anyone else having these problems? Need help!!

As far as automatic update, the iOS cannot be updated without user intervention, so it could not have been automatically updated.
You need to provide more information about your mail. Does this mean you cannot access the Mail app, you cannot download mail, or what? Not sure why you cannot access the cookies setting in Safari. Go to Settings>Safari>Block Cookies>set to what you want.
Problems with 3rd party Bluetooth devices, such as car audio, etc., generally has to do with vehicle manufacturers not providing updates to match the current Bluetooth stacks that are found in today's phones. You can go into the phone and remove the pairing for the car, and then go into car settings and remove the iphone. Then put both devices back into pairing mode and attempt to connect them again. See this support document http://support.apple.com/kb/TS3581

Compressor Can Not Connect To Back Ground Processes

Similar Messages

Maybe you are looking for