Compressor effect modes missing

In the training videos that come with CS3 Production Premium, when the compression effect is added to the rack, the pop up settings include a mode selection dialog. When I am editing audio from a type 2 AVI, I do not have that option. The tool only displays a slider for the amount of compression.
Where are the modes?

In the Effects panel, when you click the "fx" button and see a flyout listing the effects, the bottommost entry is another flyout labeled "Advanced." These consist of the same effects, but with full parameter options.
For example, the basic Analog Delay effect allows users to choose from the available presets and adjust the amount that the preset parameters are applied. The Advanced Analog Delay effect displays all of the available parameters to the user.
Durin

Similar Messages

Please help, Effects are missing in the Effects Panel of Adobe Premier Pro CS6, like "WIPE",

Please help, Effects are missing in the Effects Panel of Adobe Premier Pro CS6, like "WIPE",

Here is a list of what's missing
Adobe Premiere Pro Help | New features summary

Running STAR program in Date Effective mode

Hi All,
How the date effective mode of Synchronize Territory Assignment rule concurrent will work? Will it sync all the active territories in that date range? For example if I run the STAR program from 01-Mar-2010 to 31-Mar-2010, will it sync all the territories which are all active in this date range? Will it pick up the territory which has start date as 01-Feb-2010 and end date as 30-Apr-2010?
Please advice..
Thanks,
Suresh.

The only emulator for running Classic apps I know of is SheepShaver, and from what I've read (though not confirmed) it doesn't work under Snow Leopard (not surprising; SheepShaver hasn't been update in over three years, from what I can see). It also requires the ROM image from an older Mac, and if someone had access to an older Mac to get the image, they could just run the app on that older Mac.
So I think that the ability to run Classic apps is now completely dead as of Snow Leopard.

When opening CS4 AE template in CS5 "particular" effect is missing

Hi,
I purchased CS5 today so that I could wotk on a last minute client request involving modifications to a template. However when I open the project I receive the message "particular" effect is missing. Was this bundled with CS4 and is it now not available in CS5? Any suggestions on how I can correct this error?
Best regards,
Chris McLaughlin

Particular is a third party plugin from Trapcode. It is not, and has never been, bundled with any version of After Effects.
http://www.redgiantsoftware.com/products/all/trapcode-particular/
It's probably the most useful plugin in my After effects tool kit - well worth the money.
Depending on what Particular is used for in your project, other AE-bundled particle plugins like CC Particle World, may be able to replicate what it is you need.

After Effects error: Missing Filters in the file.

I'm using CS4 in Windows XP SP3. When I work with video in Photoshop, apply filters as smart object, and save as psd, then import into AE as footage>merged layers, I get this message: After Effects error: Missing Filters in the file. The file open as just the footage with none of the work I did in PS.
Does anyone have a solution to this? Am I missing some step along the way?
Thanks!

Isn't it obvious? AE does not support smart filters. It will only use the rasterized content of a PS layer. Hence you will have to rasterize the layer in PS to retain its appearance with all the effects applied. Look in the help which specific PSD features AE is able to support and translate.
Mylenium

Premere and After Effects are missing from Cloud Adobe Application Manager... please help ASAP

Premere and After Effects are missing from Cloud Adobe Application Manager... please help ASAP

Short and to the point: If they don't show up, your system doesn't support them. Refer to the Tech Specs on teh product pages and make up your mind...
Mylenium

After Effects CS6 Missing 'Template Projects'

Hello,
The following support page identifies the problem...
Library, title templates, template projects missing: Premiere Pro, After Effects, Encore
• When you access the template projects in After Effects CS6 or CC, the template projects are missing.
After Effects Solution: Download and install content from the Adobe After Effects Exchange
Here is the link provided by above solution....
https://creative.adobe.com/addons
However, there does not appear to be any After Effects 'Template Projects' posted at the Add-ons site.
This help page provides a description of the missing content...
After Effects Help | Projects
Could someone please identify where I can download these files from.
Thanx.../John

Hi Todd,
There is still no solution to the After Effects CS6 Missing 'Template Projects'.
Could you please post this requested content and provide a link.
.../John

Effects Palette missing .ant file image

I had to reinstall my PSE and now am in the process of reloading ALL my Actions. I am finding that half my Effects Palette is missing it's images (.atn). I have checked the options box and it is marked to show the image. I have deleted the .db3 after install. The weird thing is that even the pre-installed effects are missing as well.
Any insight would be appreciated.

Have you checked to be sure they're in the PSE program/application folder?

I'm using proxy media for a video I'm editing but now that i switch back to the original media some of my effects are missing can anyone help me.

I'm using proxy media for a video I'm editing but now that i switch back to the original media some of my effects are missing can anyone help me.

Shouldn't happen.Only thing I can think of suggesting is to delete render files and try again. Trashing preferences is a long shot, but no harm in trying. Use the Digital Rebellion Preference Manager, a free download.
Assume you have a reason for using such an outdated version of FCP X. That may be contributing to your problem.
Russ

Common effects are missing in Premiere Pro CC

Today I noticed that many common effects are missing. Example: I goto Transitional effects and then to Zoom effects. All I have are two choices? Not before last update. What's up with that? I'm paying more now for less product?

Hi Shooternz, Yes the search box is empty and all I get under "Zoom" is one choice, "Cross Zoom". Under Page peel, all I have is two choices. Under 3d Motion, all i have is two choices.

TUTORIAL: Previously working effects now missing? Here's the fix...

WARNING: This process involves editing the Windows registry, so if you are squeamish about that sort of thing, do not attempt this. I'm not responsible for broken computers, hurt feelings, or terrified household pets.
I've ocassionally run into an issue since CS4 where certain plugins/effects would spontaneously cease loading in Premiere Pro and functioning, and it apparently continues to affect CS5. This happened on three total different computers, so I'm not sure what the underlying cause is. There was no clear reason why this would happen: I'd use the effect one day, come back the next and load my project, and the effects would be reported as "missing" upon project load:
This doesn't happen with the "built-in" effects that ship with Premiere, but it has happened repeatedly with the Cycore effects (copied from the AE plugins directory) or with third-party plugins like those from DigiEffects, Red Giant, Trapcode, etc. After this loading mesage, the instance of the filter would show up in the Effects Control Panel as "Offline Filter" and the filter would have no effect on the clip to which it is applied. This isn't a case of the effect simply not being compatible with Premiere, as they had previously showed up in the Effect bin and could be applied and used, as evidenced by the error pop-up above. Uninstalling and reinstalling the plugins has no effect on correcting the issue. After a bit of hunting around, I finally figured out how to correct the problem--not the underlying cause, which I still cannot pinpoint, but I can at least get the filters/effects/plugins loading and operating again. Note that the following applies to Windows systems; I'm not sure if this affects Macs, and if it does, I have no clue as to how to correct it.
In Explorer, go to the following folder: C:\Users\username\AppData\Roaming\Adobe\Premiere Pro\5.0. Inside, you will find a file called Plugin Loading.log. This is simply a text file which you can open with Notepad or a similar text editor. In it, you'll find a long list of entries like this:
Anything that says "The plugin was successfully loaded from the registry" was obviously successfully loaded, and therefore able to be used in Premiere. However, upon scrolling through the file, you will see something like this (using the CC Snow example from above):
At some point in the list, the successfully-loaded plugins will stop and the list will change to "The plugin is marked as Ignore, so it will not be loaded." Herein lies the problem and the solution; we need to correct this issue in the registry, since we know from the above example that the plugins are loaded from the registry.
In Windows, click the Start button/orb, and select Run; in the panel that appear, type in regedit. This will launch the Registry Editor. A good safety precaution before going any further is to select File > Export and save your ENTIRE registry by selecting the All radio button. Pick a location and back it up; it may take a few moments. This is important to do if you're not familiar with editing the registry, because you can pretty quickly toast your OS installation if you poke at animals you shouldn't. You've been warned.
Navigate to the following key in the Registry Editor: HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\5.0\PluginCache.64\en_US. Here, you will see a long list of other subkeys, each of which bears the name of a plugin. If you click on one of the keys in the left pane (looks like a folder icon from Explorer), you will see a list of values, their types, and the data they hold in the pane on the right. Using the Plugin Loading.log text file as a guide, compare a plugin that loads with one that doesn't. You'll see the following disparity:
If the "Ignore" value is set as "0" (binary data), the plugin loads; if the "Ignore" value is set as "1," the plugin does not load. Based on this information, the solution should be apparent:
Using the Plugin Loading.log text file as a guide, change this data for any "Ignore" value set to "1." An important note: this does not "enable" effects that wouldn't otherwise work in Premiere Pro anyway. For example, some of the Cycore effects, like Time Blend, Time Blend FX, and Split 2, do not work in Premiere, regardless of how the "Ignore" value is set. If you should happen to change them, Premiere will set the value to "1" the next time you launch the program.
Once you've changed these values (there's no need to save, as the changes are immediately made to the registry), launch Premiere. If you were successfully, nothing interesting will happen--you'll be greeted with no error messages, and your once-missing effects will resume their place and settings on your sequence clips. You can confirm the "fix" by reopening Plugin Loading.log (be sure to have closed this file before relaunching Premiere, as it is simply overwritten each time), and looking for the entries that were previously ignored:
There you have it. Again, I don't know the reason why this happens, but I've been bitten by this oddity numerous times in CS4, and now in CS5. My best guess is that it happens when Premiere crashes during loading (which seems to happen to me) or there is some other "issue" during launch. As a sort of self-defense mechanism, Premiere tells the registry to disable these plugins to ensure a successful load the next time the program is launched, but then they are not automatically re-enabled, and hence the need for this somewhat convoluted fix. Under normal circumstances, I would imagine that relatively few users will ever encounter this issue--but if you do, you now know how to get back to work.

A great set of screen clips & tutorial. But I'm compelled to tell you guys it's even simpler than that.
All you have to do is delete the en_US keys for both the Premiere Pro & After Effects plug-in caches in the registry at:
HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\5.5\PluginCache.64\en_US &
HKEY_CURRENT_USER\Software\Adobe\After Effects\10.5\PluginCache.64\en_US
Of course, have the applications closed prior to deleting the keys. Upon launching the Premiere Pro & After Effects again, both applications will regenerate their cache folders (they'll re-appear) in the registry & you should then see all your installed plug-ins if they are installed in the correct folders & aren't corrupted.
Note that Pr & Ae will take significantly longer to launch as it re-scans all the installed plug-ins again.
If you don't want to dig through the registry, here's a copy of VBscripts to do it for you. Don't see all your plugins? One of the apps choose to ignore your plug-in's without provocation?
...just run these & re-launch the Premiere & After Effects. Enjoy.
tC
Reset Premiere Pro CS5.5 x64 Plugin Cache.vbs
**BEGIN CODE**
Const HKEY_CLASSES_ROOT = &H80000000
Const HKEY_CURRENT_USER = &H80000001
Const HKEY_LOCAL_MACHINE = &H80000002
Const HKEY_USERS = &H80000003
' Object used to get StdRegProv Namespace
Set wmiLocator = CreateObject("WbemScripting.SWbemLocator")
' Object used to determine local machine name
Set wshNetwork = CreateObject("WScript.Network")
' Registry Provider (StdRegProv) lives in root\default namespace.
Set wmiNameSpace = wmiLocator.ConnectServer(wshNetwork.ComputerName, "root\default")
Set objRegistry = wmiNameSpace.Get("StdRegProv")
' Deletes Key with all subkeys
sPath = "Software\Adobe\Premiere Pro\5.5\PluginCache.64\en_US"
lRC = DeleteRegEntry(HKEY_CURRENT_USER, sPath)
Function DeleteRegEntry(sHive, sEnumPath)
' Attempt to delete key. If it fails, start the subkey
' enumration process.
lRC = objRegistry.DeleteKey(sHive, sEnumPath)
' The deletion failed, start deleting subkeys.
If (lRC <> 0) Then
' Subkey Enumerator
On Error Resume Next
lRC = objRegistry.EnumKey(HKEY_CURRENT_USER, sEnumPath, sNames)
For Each sKeyName In sNames
If Err.Number <> 0 Then Exit For
lRC = DeleteRegEntry(sHive, sEnumPath & "\" & sKeyName)
Next
On Error Goto 0
' At this point we should have looped through all subkeys, trying
' to delete the registry key again.
lRC = objRegistry.DeleteKey(sHive, sEnumPath)
End If
End Function
**END OF CODE**
Reset After Effects CS5.5 x64 Plugin Cache.vbs
**BEGIN CODE**
Const HKEY_CLASSES_ROOT = &H80000000
Const HKEY_CURRENT_USER = &H80000001
Const HKEY_LOCAL_MACHINE = &H80000002
Const HKEY_USERS = &H80000003
' Object used to get StdRegProv Namespace
Set wmiLocator = CreateObject("WbemScripting.SWbemLocator")
' Object used to determine local machine name
Set wshNetwork = CreateObject("WScript.Network")
' Registry Provider (StdRegProv) lives in root\default namespace.
Set wmiNameSpace = wmiLocator.ConnectServer(wshNetwork.ComputerName, "root\default")
Set objRegistry = wmiNameSpace.Get("StdRegProv")
' Deletes Key with all subkeys
sPath = "Software\Adobe\After Effects\10.5\PluginCache.64\en_US"
lRC = DeleteRegEntry(HKEY_CURRENT_USER, sPath)
Function DeleteRegEntry(sHive, sEnumPath)
' Attempt to delete key. If it fails, start the subkey
' enumration process.
lRC = objRegistry.DeleteKey(sHive, sEnumPath)
' The deletion failed, start deleting subkeys.
If (lRC <> 0) Then
' Subkey Enumerator
On Error Resume Next
lRC = objRegistry.EnumKey(HKEY_CURRENT_USER, sEnumPath, sNames)
For Each sKeyName In sNames
If Err.Number <> 0 Then Exit For
lRC = DeleteRegEntry(sHive, sEnumPath & "\" & sKeyName)
Next
On Error Goto 0
' At this point we should have looped through all subkeys, trying
' to delete the registry key again.
lRC = objRegistry.DeleteKey(sHive, sEnumPath)
End If
End Function
**END OF CODE**

Why is the sound effects library missing from the audio menu is FCPX 10.1

Up until version 10.1 Final Cut Pro had a sound effect library under the music tab.
Its now completely missing and only shows itunes.
Has anyone else noticed this problem and know how to put it back to the way it used to be.

follow BenB's solution as follows:
Minor upgrade glitch, don't move any folders.
Quit FCP X.
If you have GarageBand, launch it.
Quit GarageBand.
Reboot your Mac.
Open FCP X, you should be fine.
Repeat once or twice if needed.

Read Mode missing buttons

As of this morning i'm missing the page number and up and down arrows in the tranluscent hovering Read Mode when viewing PDF's in a browser
i have checked/done the following
I clicked on the Show Reader toolbar (icon
on the very right) and then right clicked on the toolbar and selected Reset
toolbars.
Same as above but instead went to Page
Navigation and then chose Reset Page Navigation Tools

Please try this: Adobe Reader: how to disable toolbar buttons and menu items

Context menu & drag/drop mode missing

Hello,
when I place an existing Analyzer query in Excel there is no drag/drop mode available, even if this setting is checked by default. Also I don´t get the context menu on the right mouse button - what am I missing here? Maybe others have experienced the same thing.
I have saved a workbook, where these settings are active and working, so why not with a new query?
I am using Release 2004s SP9, Patch1, Revision 321.
Thank you & Regards,
Jochen

Hello Jochen,
It should not matter whether you use new or old query in the excel.
1. Please check the workbooks settings icon in the new design toolbar in BEx Analyzer and check the option "Allow Drag and Drop"
( But if this is the problem, you would get context menu )
2. Also check the properties of Gris(Table) item in the new design mode in BEx Analyzer and check the option "Allow Navigation"
( If this is not checked, you would not get context menu )
2. If you are not getting context menu, it might be possible that there is a failure while including the query. Please check the status bar of excel at the bottom.
There could be some failure messages.
Double Click on the status bar of excel. It will pop-up the error messages or
it will say "there are no messages"
Thanks,
Sheik Bilal
Message was edited by:
Sheik Bilal

Compressor plug-in missing drop down for side chaining

I want to use side chain compression but the Logic Pro X 10.1 compressor seems to be missing the drop down menu to specify what track I want to side chain to. I looked at screen shots of the compressor online and mine looks exactly the same except for missing that and a couple other elements in the header bar of the compressor.
Any thoughts about how to fix this? Should I just delete and reinstall Logic?
Thanks

Make sure you have the correct Advanced Tools enabled.
Sidenote: lots of people seem to think that reinstalling Logic will solve issues, but it will not, except maybe in very rare and unusual cases (when a harddisk crashed or hung during install, for instance)

Compressor effect modes missing

Similar Messages

Maybe you are looking for