Compressor error mesage while trying to export

I how do I fix this issue while trying to export my project ? Tbhis message appears when trying to export.
"The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"

You probably need to update the software to a version that works with Mavericks.

Similar Messages

  • HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW:  The operation couldn't be completed. (OSStatus error -61.)

    HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW:  The operation couldn’t be completed. (OSStatus error -61.)

    Hello,
    I believe the issue was the external HD I purchased was not formatted for Mac . . . once I took care of that - all went well!  The slide show transferred and the surprise 70th birthday party was a huge sucess.  Thank you everyone!

  • Error -50 while trying to export my project

    Good evening,
    I built a 1h18 project.
    Then, I chose to delete not used plans from the associated event.
    As my project is too big to share it on my MobileMe gallery, I would like, either to share it in a smaller format, or to export it or to build a DVD with iDVD.
    Unfortunately, each time I try to proceed so, iMovie answer me with a pretty -50 error message.
    I don't understand why, as I can watch my project without nay problem.
    Could anybody help, please?
    Thx
    Claude

    It sounds like you're missing dependencies in your .product file, specifically org.eclipse.jface.databinding.
    But if this is a real application that you plan to develop and support over time, I'd highly recommend switching to using Tycho. It's faster (we saw builds go from 2 hours to 15 minutes on one large app) and less cryptic to diagnose problems. My 2¢.
    Brian.

  • I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer w

    I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

    I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

  • On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

    Can you advise steps I might take now?  On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

    Hi Ringdoc,
    Please see this document: "Error occurred when trying to access this service" when logging on to Acrobat.com
    Let us know how it goes!
    Best,
    Sara

  • Error message while trying use Adobe Export PDF (to word)

    I have an "active"account for Adobe Export PDF/Word. Every time I try to convert a PDF to a word document the following error pops up everytime: "An error occurred while trying to access this service". Is there a solution?

    I'm sorry you're getting this error. Could you try the following?
    1) Log out of your account and log back in. Do you get the same error as before?
    2) Log in to the ExportPDF service on the web ( https://cloud.acrobat.com/exportpdf ). Do you still get the same error if you directly upload the PDF at the website and try to export it there?

  • BI portal error while trying to export to excel

    Hi All,
    In BI portal, I am getting an error message when trying to export the report to excel. Following is the error message:
    500 Internal Server Error
      BEx Web Application
    Failed to process request; contact your system administrator
    Information for Administrator
    To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
    1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with SAP NetWeaver 7.0 Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1164789.
    2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool  does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
    3. When opening any customer message on this issue, please attach:
    Support Desktop Tool support info ZIP  file according to note 937697,
    Required information for reproduction  according to note 948490.
    Can anyone please help me out.
    Thanks & Regards,
    Deb

    Hi,
    Let me know How much amount of data you are exporting and your system information(ABAP and Java)?
    Thanks,
    Venkat

  • "An error occurred while trying to save your photo library..."

    Installed iPhoto6.
    Started app. It said it would take a few seconds or minutes to upgrade.
    About 6 hours later after churning on thumbnails it is now claiming this error over and over with some time that goes by in between:
    "An error occurred while trying to save your photo library."
    "Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library folder."
    It says I have 22,759 photos in Library. The Library was a subset of my images, named "iPhoto Library 2005" and it was intentionally kept below the 25,000 limit of iPhoto5.
    Since Steve claims iPhoto6 can easily handle 250,000 photos, I clicked on the upgrade button with confidence. This now appears to be a mistake. Last night I was working on an iDVD for the local school and the majority of that work has simply vanished. There were 320 photos. I spent hours adding keywords, ranking, adjusting temperature, focus, exposure, etc.
    Of the 320, only 16 photos survived. They are 16 in a row from the middle of the roll near the end but not at the end. The roll name was lost. The name is now just "Roll 226" and none of the photos have keywords. I know at least one of the 16 should have the keyword "DUPE" and the ranking 2 STARS since it precedes a double that I ranked 2 during a slideshow, sorted by ranking, and dragged to the DUPE keyword. All 16 should have the ACROCK keyword which I initially assigned to all photos.
    Again, 304 of 320 have vanished and the 16 that remain have no keywords or rankings.
    I watched the slide show in iPhoto5 three times with different music candidates so I know the keywording and rankings evaporated in iPhoto6. I also clicked ACROCK and option clicked DUPE and POOR so that all of the music program photos except dupes and poor images would vanish. I only deleted one photo so there were not a lot of changes to the library in terms of photos in it. I cannot think of any reason why the 16 chosen survived. Only two were placed in a DVD dropzone and they are scattered amongst the 16 survivors.
    Also, the ACROCK and DUPE keywords are also gone while the POOR keyword added in August is in the keyword table just fine.
    I exported these 320 photos last night to iDVD and tried almost all of the different themes and I dragged about 10 different photos to the dropzones, hit play, hit motion, etc.
    It seems very strange that 16 photos from the middle of the pack would survive.
    It seems extra odd that iPhoto5 and iDVD treated these as "established" photos, not photos hanging in the wings somewhere ready to vanish in an upgrade.
    I gracefully saved and quit iDVD and iPhoto5 and there were no crashes and nothing strange happened while making the DVD. I was hoping today to try out the new themes and maybe find one that is just right for the kids. Instead, about 300 of 320 photos of the kids went bye-bye along with all the work on the photos!
    I'm nervous that many more photos are missing but I will need to do a ton of checking to see what else has been deleted by the upgrade.
    The user message that iPhoto6 presents is nearly useless and strange. It offers little if anything to go on in terms of a repair procedure. After saying an error has occurred, it says some recent changes could be lost but doesn't expand at all on what they may be or why.
    From my experience, recently added photos, keywords, keyword assignments, rankings and maybe more can all be lost. To compound matters, before the upgrade it says that you cannot go back to the prior (working!) library in iPhoto5. Beware!
    It finishes by suggesting two vague steps to take. The first is to make sure your disk has "enough" space. How much is "enough"? It doesn't say something like X GB available, Y GB needed. A user would have no clue about how much space to free up. I have over 17 GB and assumed that would be enough. I sure hope it doesn't require double the space of the existing library. I would hope it has a smarter algorithm than that since 23,000 photos at about 3 MB each maps to about 70 GB. That's a lot of "temporary" space to require to perform an upgrade. Since the upgrade/error message provide no details (unlike package installers which supposedly tell you how much space you need), users like me would have no clue if 70 GB is plenty or not enough.
    I found 24 GB secretly used by iPhoto 5 for an iPod Photo Cache and a tech bulletin saying this just grows and grows without control and it can be deleted SO I wouldn't put huge hidden disk usage past iPhoto6.
    The last none-to-helpful suggestion is that a user make sure that iPhoto is able to access the iPhoto Library folder. Huh?!??!?
    Wouldn't this be a great thing to confirm via software before setting about on 6+ hours of work, especially if there is an error message hard-coded in the software confirming that Apple knows the result may be losing valuable customer photos and hours of work on enhancing, keywording, creating DVDs, etc.?
    Of course. This appears negligent. To know that customer file loss will likely result but not checking these things out in advance before taking that risk seems like putting the cart before the horse at customers' expense & pain and certain loss of irreplaceable family photos (for the, say, 80%+ of iPhoto users that "plan" to get a backup routine established?).
    I got burned in the iPhoto5 upgrade as well, losing photos, so I was sure to have a backup so it wouldn't happen again. Most I fear won't be so fortunate so be advised of the risk and work with copies of your photos only.
    Also, why would iPhoto5 have all the permissions it needs to store, edit, tag and otherwise work with 320 photos added last night? Why would version 5 have plenty of permissions to use the folders and the photos in them. Why would iPhoto 6 suddenly lose those permissions or not have enough? This hardly makes any sense. The only way the permissions were set, the iPhoto libraries got created and the albums got created was by dragging a folder of images onto the albums pane in iPhoto5. So, iPhoto5 set all the permissions, everything is under one user account and there should be no surprise permissions for iPhoto6 to deal with.
    It seems unbelievable that iPhoto 6 couldn't do what iPhoto 5 was doing. I never changed permissions and never touched files in the iPhoto 5 structure.
    I can only guess that recently added keywords, recently added photos and recently added rankings and keyword taggings linger in some at-risk staging area that a version 6 upgrade doesn't know how to deal with. This seems like a lame way to code this app so I don't consider this a good guess but what else could it be?
    Anyone else have a better hunch at a root cause?
    Anyone else have an idea of a cure?
    Anyone else run into this?
    It sure doesn't look like there was a test case for having near 25,000 photos (an iPhoto 5 documented requirement), working with the latest roll and then doing a version 6 upgrade because it failed miserably--user data loss--without any special effort to find defects. In a former life I tested software and released software was much more difficult to break than this.
    I would appreciate any other user experiences/solutions related to this problem. I am reluctant to import another 22,000 photos from iPhoto Library 2004 only to find more photos go poof without any rhyme or reason.
    Thanks in advance for your help and I hope this alerts others to a potential for valuable photo loss (i.e., back up before you upgrade, verify iPhoto Library permissions--whatever that means--and have scads of disk space available assuming there's any truth to the error message!).
    --Sam
    G5 Dual 2.7 GHz 2 GB DDR SDRAM   Mac OS X (10.4.4)  

    I'll check if I have copies of copies of copies. This could take a while due to the number of files.
    I picked up a brand new 300 GB Western Digital hard drive thinking 20GB or so was not enough for temp files for upgrading and/or importing.
    I formatted it as a mac os extended, journaled drive, not case sensitive, one full-size partition. I started iPhoto6 with the option key. I had a CF in my other WD 300 GB (with media reader). iPhoto6 asked about the photos on the card. I told it not to download those (again). Because I was holding the option key down, iPhoto6 asked if I wanted to select a different library or create one. I created one on the brand new, 100% empty 300 GB drive. I'm not sure if/where iPhoto6 creates temporary/cache files (like iPhoto iPod Cache folder) as it sets up a new library. I was hoping the empty 300 GB drive would give it ample room to load an existing iPhoto5 library.
    When I dragged an old iPhoto5 Library onto the new iPhoto6 Library Album pane. I saw the "Importing..." start and it went on and on and on and... I let it run for HOURS and HOURS. When I checked around midnight, it had crashed. When I started it again, it said it had run across some huge number of stray photos.
    I have no idea why iPhoto6 would have trouble importing an iPhoto5 library that was below the 25,000 photo mark for 5. This is especially bizarre since iPhoto6 claims it supports 250,000 photos!
    I'll be trying to figure out if these stray photos got imported as dupes, if they lost iPhoto5 keywords, etc. I fear something different but equally bad happened since the number of photos it came up with was like 79,000--again many stray photos that didn't make it into the first import for no known reason. Since libraries in iPhoto5 were around 25,000 or less, I'm not sure what's happening.
    Maybe there's a cache or temp file still created on Macintosh HD and not on the empty new 300GB drive and a bug exists for imports when space on Mac HD is "low" (i.e., under 3.5 GB). Maybe it's seeing thumbs as files it should import? Maybe it's seeing Orig and Modified images as worthy of reimporting?
    I had told it not to import dupes but who knows if it goes by file name, checksum, byte-for-byte comparison, etc.
    I'm not sure if I can even pull up iPhoto5 and 6 at the same time now to scroll through the libraries to see if dupes, thumbs, original/modifies/etc. are showing up to boost the count from under 25K to 79K!
    Ideas? At least I know I'm not the only G5 dual user with this problem!
    --Sam
    G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)
    G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)

  • An error occurred while trying to access the service?

    I'm trying to convert a PDF into Excel but I get the message 'an error occurred while trying to access the service'.
    I have tried logging into my Adobe account online and doing it within there, but once I have exported the file and pressed 'convert' it simply says 'conversion failure' with no explanation.
    My subscription is still valid, so I don't see why the problems?  Has anyone else had this issue and managed to fix it?  I get the error message regardless of whether I'm trying to convert to Word or Excel.
    Any ideas greatly appreciated!!
    Thanks
    Sophie

    Hi SHurcs,
    I'm sorry that you're having such trouble with your ExportPDF subscription. Does this error occur for one particular file, or with any file that you try to convert? What operating system and browser are you using?
    To get us started, here are a few things that you can try:
    In Reader, sign out, and then sign back in.
    Use a supported web browser:  http://www.adobe.com/acom/systemreqs/
    Clear the browser cache.
    If you're using a networked computer, make sure that there are no firewall/proxy settings that prevent you from uploading files to the Internet.
    Make sure that the files you're trying to convert are within the file-size limits for ExportPDF (100 MB).
    If the problem persists, please let us know, and tell us a bit more about the files that you're converting.
    Best,
    Sara

  • I am trying to convert PDF to word. With my PC  I get a message  "Error occurred while trying to access the service.   It worked fine for a long time.  Has been doing this for days now with all files i try to convert.

    I am trying to convert PDF to Word with Adobe Export PDF on my PC.  I get the message " error occurred while trying to access service".  Has worked fine in past.  Has been doing this for a few days now on all files i try to convert.    Any ideas?? Thanks

    Hi bert090909,
    Are you trying to convert your files from within Adobe Reader? If so, please make sure that you have the most current version by choosing Help > Check for Updates. Earlier versions of Reader could cause the specific error that you're reporting.
    Please let us know how it goes.
    Best,
    Sara

  • An error occurred while trying to provision the service 'Discussions'.

    Hi All
    I initially got the error Failed to authenticate user when accessing the discussion and Announcement services within WebCenter. I subsequently configured WS Security by providing the required keystore as indicated in this tutorial:
    http://e20tricks.blogspot.com/2010/02/webcenter-quick-install-guide.html
    I've created a orcladmin user that is the system admin in Jive Forum too and use this as the required user in the service configuration within EM.
    I now however even though the Discussion and Announcement Service is available in WebCenter get the following error when trying to add either service to a group space:
    An error occurred while trying to provision the service 'Announcements'. The service did not get provisioned.
    I can't find anything in the logs that indicates any errors.
    Have I missed something? A slight configuration stuff-up perhaps?
    FYI my keystore defines -dname as "cn=machine name, dc=com, dc=au".
    Any advice and help would be much appreciated :)

    Make sure when you generate your keystore you use these commands:
    genkeypair
    importcert
    exportcert
    and not:
    genkey
    import
    export
    if the above commands you should be using are not available you've got an issue with your keytool which is probably an incorrect java. Make sure you have a JDK installed.

  • An error occurred while attempting to export the virtual machine (0x80070050)

    I was exporting several VM's from a Vhost so that i could import them into a new cluster. Four out of the five machines went off with no hitch and were exported and then imported.  However one of the machines throws up an error durring the export
    "An error occurred while attempting to export the virtual machine.
    Filed to copy file during export.
    Failed to copy file from 'D:\path\of\vhd\VM.vhd to 'D:\path\of\export\VM.vhd': The file esists (0x80070050)"

    I have found an answer to my own question after
    further investigation  … In hopes of helping anyone who may have a similar problem in the future.... 
    What happened was the server has two VHD’s one is located in C:\vm\vhd\server.vhd the second was located in a different directory such as C:\vm\vhd1\server.vhd 
    as both vhd files were named identically when the export was attempted it tried to move both files into the same directory I assume giving the “file already exists error”.

  • I'm getting error 5000 while trying to backup my phone before I can run an update

    I'm getting error 5000 while trying to backup my phone so I can run an update. I'm getting a message that says my back up is corrupt. What does that mean and how can I fix it?

    Hi
    This is an easy Q: to set - but there is no simple and plain answer only a lot of more or less plausibly suggestions.
    Error -50 = paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ?
    If so it Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk 11Gb is on the limit to work when You select Export and might be it.
    Video used - there are several video formats/codecs and iMovie can not use all of them, they evolve to fast.
    • So try to find out by opening a raw video in QuickTime-player and then open Inspector (cmd+I) and read
    Video Format/Codec: nnnnnnnn
    What does it read ?
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    I convert all audio to .aiff - in iTunes I burn out as an Audio-CD .aiff (not .mp3) and use the files on this in my movie projects.
    Some times it's needed to trash the "com.apple.iMovie.plist" file in You USER-Library/Preferences (not Library on Root level (when opening Macintosh HD) - but the one in Your home folder.
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Yours Bengt W

  • An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.

    Hi Everyone,
    I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load.  The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
    fine the rest of the day, oddly enough. 
    A few things about my form:
    1). It is web enabled
    2). The form submits to a form library on the SP server
    3). I use the UserProfileService data connection in the form to auto-populate a few fields
    4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
    5). The form has been working fine until a few days ago
    I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped.  Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
    have the service account information.
    Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
    Schema file was already loaded: BuiltInActiveXControls.xsd
    FormServer Partial Trust - Proxy operation invoked in the SHIM process.
    FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
    Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
    The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
    Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.

    Hi B.,
    You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
    If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
    Hope this helps.
    Daniel Christian (MCTS)

  • An Error Occurred while trying to join "my wireless access point"

    Hi,
    I've been using wireless access for a year and never had a problem connecting.
    But starting yesterday I get a +*An Error Occurred while trying to join "my wireless access point", Please try again.+* Message.
    I have 2 Mac's and have no problem connecting with the other one. It’s just the IMac.
    I tried everything including resetting router, changing password, adding a $ to the password, accessing without password, deleting the whole air port and create a new one, but still getting the same message.
    I might need to add, while I was working with the IMac I didn’t use wireless for a few hours, but when I got back to my browser I noticed that I was connected to a different wireless service. (FONFREEINTERNET if it matters) I have no idea why, since I didn’t change it.
    Anyways, I tried to switch back to my access point, but it wouldn’t let me. It’ll just give me the +*An Error Occurred while trying to join "my wireless access point", Please try again.+* Message.
    Funny is when I use the FONFREEINTERNET access point the internet seems to work fine.
    I could look up Google without a problem, but when I tried to connect to Facebook for example it won’t let me. Instead a FONFREEINTERNET page will pop up with some options on how to pay! (by minute/or day/or week…)
    I get the strange feeling that they planted some kind of bug/virus!!!
    I don’t know what else to do.
    Anyone knows that problem? What can I do?
    Any help is greatly appreciated!
    I researched on FONFREEINTERNET, there’s a spot close to my house/guess that’s the one I used…
    http://maps.fon.com/ ZIP CODE 904-0113 and you’ll see a coffee pod, which is about 2 minutes walk from my house.

    Hello Tesserax,
    I get the same error message again...
    I tried the 3 suggested steps again, but unfortunately it did not work.
    After a Restart, Sleep or just the awaking from Screensaver mode I’m disconnected from my wireless Network anymore.
    Even if the Computer was asleep for just a second!
    I am able to fix the problem temporarily with Network Preferences → Assist me → Diagnostics
    Choose Airport → Choose network → Enter Password (Even if I check safe password it’ll ask me every time) → and than usually all lights on the left menu switch from red to green and I get the popup message “A Network Change has been detected. Your Internet seems to work fine.” (similar - I’m at work and don’t remember exactly)
    And it works fine…until the screensaver comes on or it sleeps again
    I have the Problem with my IMac and Mini but the IMac at least remembers my password…
    Any Ideas
    I’m connected through a Buffalo WZR2-G300N wireless router

Maybe you are looking for