Compressor - export to Blu-ray with more than 6 chapter Markers?

Hi,
I'm interested in creating Blu-Ray discs. I've played around taking a self contained 30 minute movie I created with FCPro 7 - it has several chapter markers put in while editing in FCPro.
I took the SC movie and brought it into Compressor and burned directly to a DVD with the Chapter markers. It worked perfectly.
2 questions, if anyone has done this . . . if I buy a Blu-Ray burner and firewire it into my MacBook Pro - can I burn the Blu-Ray exactly like I did the conventional DVD? Except now it'll be High Definition? I'm guessing in COmpressor, when I 'selected' the internal DVD burner - I guess I'll see the new external Blu-Ray one after I firewire it into the MacBook Pro?
My question is, will it then burn to the Blu-Ray exactly like it did to the internal conventional DVD burner, except be in HD now?
I just don't want to buy a Blu-Ray burner and have something nt work? Thanks, if anyone can confirm this.
I also have Roxio Toast Titanium 11. But keeping it all in Compressor seems easier - with limited screens.
Oh, I only get 6 chapter markers on a screen thru Compressor. Any tricks as to how I can get more than 6? I have like 30, and I'd rather not go thru 5 screens getting to the end!
Thanks very much if anyone has any experience in this area.
Larry

Thank you, Shawn. You're confirming everything I thought!
Just asking . . . perhaps you have a few thoughts here:
- Is Compressor version 4 any "different" than 3.5 - as far as just dropping in a QT movie master to compress?
- I guess there's no way to get more than 6 Chapter Markers in Compressor DVD? I don't see a way, perhaps there is? Or . . . I have to learn toast! But I can do that! Just easier if Compressor would do it all!
Thanks again

Similar Messages

Compressor Blu-ray with more than one sequence ?

Is it possible to create a blu-ray from the "New Batch from template..." of Compressor with more than one sequence ?
Message was edited by: Rudy A-Traxx

Thank you, Shawn. You're confirming everything I thought!
Just asking . . . perhaps you have a few thoughts here:
- Is Compressor version 4 any "different" than 3.5 - as far as just dropping in a QT movie master to compress?
- I guess there's no way to get more than 6 Chapter Markers in Compressor DVD? I don't see a way, perhaps there is? Or . . . I have to learn toast! But I can do that! Just easier if Compressor would do it all!
Thanks again

Why i can't export a video online with more than 14 minutes?

Hi.
the videos over 14 minutes I can not export online. Appears this message: Not supported in this destination for videos that exceed the maximum length. Reduce the length of the video and try again.
Please help me. My computer is a pc (windows7).

luuauler
What version of Premiere Elements do you have and on what computer operating system is it running.
The Premiere Elements built in YouTube feature has a file size and duration limit. For the current version 13 it is 2.2 GB file size and 15 minutes.
If your video exceeds these limits then you can export that Timeline to a file saved to the computer hard drive and then upload that file to YouTube
at the YouTube web site.
The YouTube web site offers extended time accounts for this video. These YouTube extended time accounts cannot be used in the Premiere Elements
built in YouTube feature.
Upload videos longer than 15 minutes - YouTube Help
Please let us know if you need supplemental help exporting your Timeline content to a file saved to the computer hard drive for upload to YouTube
at the YouTube web site.
Thank you.
ATR

Best export format for encoding & burning Blu-ray with toast?

Hi!
Have a 1 hour and fifteen minutes program which I burn to Blu-Ray with Toast 10/HD. The problem is the time it takes, about 25 hours. Is this resonable really?
Maybe it´s depending on the format I put out from Final Cut - H.264, 1920 x 1080 (1888 x 1062)Stereo (L R), 48,000 kHz
Does anyone know if there is a better export setting in Final Cut to get the process work faster in Toast?
Best / Urban

I've never used toast to burn a BluRay however I have used encore and I export 10 bit uncompressed out of FCP and compress that. If your over an hour of program you'll have to scale back the data rate to make it fit, a 90 minute feature looks good content wise, but any text on it will show signs of the reduced data rate. the encode typically takes about 8 hours to build the disk image on an 8 core mac then about 45 minutes to burn from the image. I burn first to a rewritable in case of issues, then if it passes muster I'll burn the master

Device error to export on Blu-Ray

In Adobe Elements 4, when i made export to Blu-Ray a device error apear . I repeat the export three times with diferent discs,Verbatim 2xBD-R , Memorex 4xBD-R,and the same problem apear..The computer is a Sony Vaio AR-71S. Please help me...

No need to say that you already tried to restart application.
For 'Device error', try whether device working properly with some other application like Window Movie Maker or other app comes with BluRay burner.
'Device error': try to connect device first and add media to it and than start Premiere Elements
'Device Error': Insert some bluray dics or movie to bluray burner and check whether window explorer able to read it properly.
'Device Error': update Blu-ray burner firmware.
'Device Error': In Premiere Elements, Share, select 'BluRay' not 'DVD' and click on rescan.
Please try these options and till than let me think some more way to help.

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Exporting to Blu ray settings

Hello,
After struggling with different framerates ( this is solved ) I got a new problem now.
The original footage what I work with is 30 frames ( mediainfo a tiny great program that gives you all information about a file )
I create a new event and/or new project and select in the video properties custom settings 30 frames.
When I export the clip as a master file or vimeo or Apple device it all export as a 30 frame file or movie.
BUT when I export ( share and compressor ) as a blu ray everytime whatever I do it creates a 25 frame blu ray. It has to be 30 frames.
I have been looking in the settings but ther is not much to choose. Only when I make and import a new project there I can fill in what framerate.
What am i doing wrong. Please tell me I am busy with this for almost 3 hours and can not find out.
The screen below are my settings.
Thank's
Richard

I just made a test with a 24 frames footage actually 23.976 or something like that. That worked fine.
The 30 frame footage does not work unfortunatly.
Most probably indeed it is not supported.
The 30 frames from the 5dmark2 footage according to this program media info is 30 frames not 29.976.
funny thing is the last firmware update of the camera the 30 frames is not there anymore. only 24 and 25 frames.
Who is there to blame.
Now I am stuck with a lot of 30 frame movies wich Final cut does not support.
I hope there will be a update from Apple to support this because there are a lot of people with these footages.
thank's
Richard

Exporting to blu ray and using episode problem

I have a 60 min HDV time line of which I would like to export to Blu Ray ready for the future so I can then delete the master files and clear some space of the main hard drive.
I bought a program by flip 4 mac called Episode Pro which plugs in to compressor and you can use it to export files apparently quicker and better.
Episode has a drop down box with Blu Ray settings for Video and Audio which I choose. so far so good.
When I tell it to export and then bring up the batch monitor it tells me that it take 3 or 4 days and the first try took 3 days and then a message failed came up.
After that I had to reboot because it messed up FCP too
Am I doing something wrong in episode and if I was to use normal compressor for Blu Ray exporting what settings should I use, I only see HD DVD?
Thank you in advance,
Regards
Darren

These are settings for compressor that I use.
I use bootcamp, windows, and DVDitPro HD to burn blu ray disc.
These settings are what DVDitPro likes ( no re-encoding)
Name: blu ray video
Description: No description
File Extension: m2v
Estimated file size: 7.91 GB/hour of source
Type: MPEG-2 video elementary stream
Usage:Blu-ray
Video Encoder
Format: M2V
Width: 1920
Height: 1080
Pixel aspect ratio: Square
Crop: None
Padding: None
Frame rate: 29.97
Frame Controls: Automatically selected: Off
Start timecode from source
Aspect ratio: 16:9
Field dominance: Automatic
Average data rate: 18 (Mbps)
1 Pass VBR enabled
Maximum data rate: 27 (Mbps)
High quality
Best motion estimation
Closed GOP Size: 1/2 second, Structure: IBBP
Name: blu ray audio
Description: No description
File Extension: ac3
Estimated file size: 82.4 MB/hour of source
Audio Encoder
Format: AC3
Sample Rate: 48.000kHz
Channels: 2
Bits Per Sample: 16
Target System: Generic
Data Rate: 192 kbps
Compression Preset: Film Standard
Audio Coding Mode: 2/0 (L, R)
BitStream Mode: Complete Main
Center Mix Level: -3dB
Surround Mix Level: -3dB
Dolby Surround Mode: None
LFE Exists: No
Dialog Normalization: -27 dbFS
Copyright Exists: Yes
Original Content: Yes
Audio Production Information Exists: No
RF Overmodulation Protection: Off
Channel Bandwidth Lowpass Filter: On
DC Highpass Filter: On
LFE Channel Lowpass Filter: On
3dB Attenuation: Off
phase 90: On
Deemphasis: Off

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes (or I already have) and my server won't start

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes
(or I already have) and my server won't start.
<P>
The steps are the same whether you have already upgraded or are about to.
<P>
Calendar Server 4.0 on the Windows NT platform can only support up to nine
nodes on one server, while 3.51 supported up to 14. If you have a Calendar
Server 3.51 with more than 9 nodes that you want to upgrade to Calendar Server
4.0, Netscape recommends that you migrate the extra nodes to another Calendar
Server 3.51 on another Windows NT system. To accomplish this:
<OL>
<LI>Install Calendar Server on another Windows NT machine and configure it to
use the same directory server as your current Calendar Server.
<LI>Stop and backup your current Calendar Server.
<LI>Individually zip up the node directories you want to move to the new
server. (drive:\unsers\unison\db\Nx
where "x" is the number of the node you want to use.)
<LI>Stop the new Calendar Server.
<LI>Unzip the files into the new Calendar Server in the same place as they
were on the old server.
<LI>Edit the unison.ini
file on the new server to add the nodes you have just migrated.
<LI>Edit the unison.ini
file on the old server to remove the nodes you have moved to the new server.
<LI>Edit the nodes.ini
file on the old server to remove the nodes you just moved and then add them
with the new hostname. Keep in mind that you will only be able to modify the
node network from the old host.
<LI>Run unidbfix -export
on both servers for all nodes.
<LI>Edit the remotenodes.ini
file on both servers to reflect your node topology.
<LI>Run unidbfix -import
to import the changes into the node databases.
<LI>Run unidbfix -c,
then -f,
then -c
again on both servers for all the nodes.
<LI>If you don't get any errors, run uninode -test all
to test if your nodes connections are set properly. If they are not, <B>do not</B>
start either of the servers; instead, fix the errors and try again.
<LI>Start both servers.
<LI>Log in and check to see if you can see people on remote nodes.
<LI>Notify the users on the moved nodes of their new calendar host.
<LI>If you did this in preparation of an upgrade, you can now run the upgrade to
4.0 since both servers contain fewer than 9 nodes.
</OL>

Use Disk Utility whihc is in the Utilities Folder.
Select your Boot Disk on the left.
Select Verify Permissions
If any errors the do Reapir permissions.
You might have to repeat the process.
see this:
Steve

Problems deploying Windows 7 x64 computers with more than 8GB RAM

SCCM 2012 R2 CU1
Windows 7 x64
We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
- we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
The error shows in 3 different ways – depending of the computer model.
1) BSOD – STOP 0x000000F4. Disk error.
2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently fail every time after the error has begun. If we reduce (remove physically)
the memory to max. 8GB of RAM, they successfully run the Task Sequence. We get the above errors on both Lenovo and HP machines with more than 8GB.
I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
error on both m93p and M83. At least not the BSOD on the M93p ;-)
Tried setting SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
the same problem.
Investigating the smsts.log on a computer with the 0x87D00269 error.
Policy Evaluation failed, hr=0x87d00269 InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
you have not previously used.
Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords. And again why only on computers with more than 8GB RAM.
Anyone else had problems rolling computers with more than 8GB og RAM?
Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
Why does it only affect machines with more than 8GB RAM?
How to get rid of the 0x87D00269 error?
Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
Any help or hints would be appreciated!
Thanks
Anders

We have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
Machines with >4GB of RAM
Lenovo ThinkPad T540p failed applying drivers with 80040005
Black screen/white cursor issues intermittently
No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
Daniel Ratliff | http://www.PotentEngineer.com

Is there a way to open CSV files with more than 255 columns?

I have a CSV file with more than 255 columns of data. It's a fairly standard export of social media data that shows volume of posts by day for the past year, from which I can analyze the data and publish customized charts. Very easy in Excel but I'm hitting the Numbers limit of 255 columns per table. Is there a way to work around the limitation? Perhaps splitting the CSV in two? The data shows up in the CSV file when I open via TextEdit, so it's there. Just can't access it in Numbers. And it's not very usable/useful for me in TextEdit.
Regards,
Tim

You might be better off with Excel. Even if you could find a way to easily split the CSV file into two tables, it would be two tables when you want only one. You said you want to make charts from this data. While a series on a chart can be constructed from data in two different tables, to do so takes a few extra steps for each series on the chart.
For a test to see if you want to proceed, make two small tables with data spanning the tables and make a chart from that data. Make the chart the normal way using the data in the first table then repeat the following steps for each series
Select the series in the chart
Go to Format sidebar
Click in the "Value" box
Add a comma then select the data for this series from the second chart
Press Return
If there is an easier way to do this, maybe someone else will chime in with that info.

Upload Excel file to itab with more than 255 chars

I want to upload an excel file to internal table with more than 255 characters in one of the field. However it restricts the upload to only 255 characters. Currently I am using the code
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_field_seperator = 'X'
i_line_header = 'X'
     i_tab_raw_data = wa_tab_raw_data
     i_filename = p_file
TABLES
     i_tab_converted_data = <fs_table>
EXCEPTIONS
     conversion_failed = 1
     OTHERS = 2.
where <Fs_table> is a dynamic structure in which one column is defined as string. We cannot use FM ALSM_EXCEL_TO_INTERNAL_TABLE as it has a restriction of only 50 characters and I dont want to create a Zstruture in the system.

It wont work for excel file type.However, with FM Gui_Upload and use a text tab-delimited file we can upload long text.
Here is the code.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = p_files
      filetype                = 'ASC'
      has_field_separator     = 'X'
    TABLES
      data_tab                = <fs_table>
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.

Reports with more than 100 columns

I am using Apex 3.2. I am using a classic report with more than 100 columns. So to use the custom heading in the report, I exported the page,did modification in exported sql file and imported back.
But when I am passing the parameters from a input screen for the first time either it is showing the all data avilable in the database or with only header. If I do the refresh in input screen and try it then it is working as intended. I am updating at the below loaction of the page.Let me know if I have to update anything more in the sql file.
declare
s varchar2(32767) := null;
begin
s := null;
wwv_flow_api.create_report_columns (
p_id=> 200100535534034253 + wwv_flow_api.g_id_offset,
p_region_id=> 2003453533453 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_query_column_id=> 157,
p_form_element_id=> null,
p_column_alias=> 'XYZ',
p_column_display_sequence=> 157,
p_column_heading=> 'XYZ 123',
p_column_alignment=>'LEFT',
p_disable_sort_column=>'Y',
p_sum_column=> 'N',
p_hidden_column=> 'N',
p_display_as=>'WITHOUT_MODIFICATION',
p_pk_col_source=> s,
p_column_comment=>'');
end;
/

Hi,
Its just a general thought and I realize you know your application and user community better I do, but do you think your users are going to be very happy when they are presented with a report with more than a hundred columns? Have you considered maybe presenting the data in some sort of rolled up form from which the user can then drill down to the data they are particularly interested in. Also, I'm sure your LAN administrator would be happy not to see 100+ column by x number row reports being regularly shipped across the network.
Also, 100+ column reports suggests tables with 100+ columns which are probably not designed in a very relationally compliant way. I find that good DB design usually results in applications that have to make less compromises, such as hacking export files in order to fool the API into making ridiculous, unsupported and unsupportable compromises.
Just a thought..................
Regards
Andre

OAS 4.0 and Oracle 8i refuse to exec stored proced with more than 20 params

Hi,
I'm programming a web application with stored plsql procedures and Oracle Application Server.
I started using Oracle 8.0.5 and OAS 4.0. It was working fine until I needed to use dynamic plsql and decided to upgrade to Oracle 8i (8.1.7).
Some of my stored procedures have more than 20 input parameters and didn't supose any problem in the "old" installation, but now when I try to execute
them via OAS over Oracle 8i it returns an error as if the number of parameters I gave were incorrect.
Modifying the procedure so it has less than 20 parameters works fine.
In resume: with the same input form and the same stored procedure with more than 20 input parameters works under Oracle 8.0.5 but fails under 8i.
Any ideas why the newest version doesn't accept more than 20 parameters?
Thank you.
Miquel Salvà
[email protected]

Hi Martin.
So, as far as i understood is the step where data is loaded into database that is taking too long ?
Wich one of these is your cenario ??
Cenario 1
Step 1) Export product data as CSV fike
Step 2) 3rd party app parses data (some processing is done in CSV file) generating another (or overwritting the original) CSV file
Step 3) CSV file generated in step 2 is pushed to database using sqlloadr
Step 4) Some pos-loading transformation is done
Cenario 2
Step 1) Export product data as CSV fike
Step 2) CSV file is loaded into database using SqlLoader
Step 3) After sqlloader is finish, some post-load processing is done
Step 4) 3dr party transformation is done
I think your problem can be in loading that data into database.
Is the CSV file big?
you can fasten sqlloader using direct-mode, destination tables can be in nologging mode (faster) and with the right space allocated (avoiding segment alocattion overhead)
Best Regards
Rui Madaleno

Bugged audio playback? When I start working with more than 1 audio track.

Hi!
I have been using premiere elements 12 for editing FullHD videos.
Brand new for me just bought it like 2 weeks ago.
Now during the last couple weeks I have had this MAJOR proglem with editing the audio.
This problem is headache and turns my simple editing into almost impossibilites.
I have had this problem with all my projects. _ALL_
Usually the problem seems to appear when I want to start working with several audio tracks.
At somepoint my projects just get ruined, I simply cannot hear the audio tracks.
The audio starts to disapear randomly from all the audio tracks.
It is not only playback problem. When I exported the video, the audio was partly missing, same as the project.
I have tried to look help on forums and search all what I could find, but havent been able to solve this.
Small fix has slightly helped:
I export audio to single track and bring it back to project. This works but I still usually have more editing to do.
I simply cannot understand why the playback disapears, I fear it is a bug.
I found lot of earlier version problems on people with similar type of problems, but no help for this version of program.
To solve the matter I have changed my audio setting in PE12.
Tried Premiere Elements WDM Sound and ASIO4ALL V2, but same problem on both.
I have looked up that my audio playback device and PE12 matches, and are not muted, and volumes maxed.
I have deleted my C:\ appdata\roaming\adobe premiere elements & premiere elements 12 folder preferences.. not helping..
I press the update pretty much everyday hoping for new version.. But yes, program keeps telling me its the latest.
I usually only work with 3 audio track maxinum. And I am doing really the most basic stuff here..
I have set all my audios to foreground and it has given me best results, but it does not seem to take the problem away as at somepoint randomly my audio playback is missing again, randomly across the playback.
Please anyone? I am feeling hopeless here.
Info on my computer:
Operating system: Win7
Processor: AMD Phenom(tm) x4 955 processor 3.20 GHz
memory (RAM): 4GB
system: 64bit
<moved from downloading, installing, setting up forum by mod- kglad>
Message was edited by: kglad

First of all, thank you for replying my message!
I will go and try to answer best I can.
Source media properties:
Progressive frame rate, I record this from a game.
Recording program: dxtory
codec: Lagarith Lossless codec
Format: avi
Frame width: 1920
Frame height: 1080
Data rate: 1990656kbps
total bit rate 1992192kbps
Frame rate 30/frames/seccond
Audio of video properties:
Codec: PCM
Format: 16bit, stereo
Bit rate: 1536kbps
Channels: 2(stereo)
Audio sample rate 48 kHz
In addition to that I use wav files for music and narrate
Music files sizes 20-50mb
bit rate: ~1411kbps
In total sizes of audio involved is usually something like 300mb
What are you or the program setting as the project preset in the new project dialog. See Edit Menu/Project Settings/General and its Editing Mode, Timebase, and Frame Size readings.
I opened new project and this is what i got:
Editing mode: HD 1080i
Timebase: 25,00 frames/second
Frame size: 1920 x1080
Audio is 48000 Hz
(I dont know how to change these, btw. Program don't seem to let me change editing mode.
I also looked up my most recent project and found these settings:
Editing Mode: DSLR
Timebase: 30,00 frames/second
Frame size: 1920 x1080
..and same audio settings
Do the problems persist if you start a new project? Do you find the audio problems develop when the Timeline content is fairly well developed or can the problems occur when there a minimal amount of content of those tracks? Let us look at the size and duration of this project.
Yes, I have had this problem with all my projects. Sometimes it goes away tho, just enough for me to work bit more. My work progress usually starts by clipping the video material, like 1h material to 8minutes in clips. After that I want to work with audio tracks, and here problems start! When I start working with more than 1 track, so the problem is at later stage. To fix the problem a small fix I have used, I export audio like music and effects tracks together to 1 wav and bring it back. After that, I start working with narrate track. To describe the problem with audio:
Audio Randomly starts to disapear when I playback, and can also be gone if I export the video out.
My source videos total size are usually within 80Gb max limit and audio edit material 300mb total.
In my last project my biggest source video was 47GB and leingth of 1h 4m, in addition to that I had 3 smaller videos, sizes of 1GB, 1,54GB and 300MB.
Is there any evidence that you are accidentially moving the audio track rubberband to alter the audio volume. That rubberband is the orange line that runs horizontally through the middle of the audio clip when you are looking at the wave form display style of that audio track. The rubberband represents audio volume.
No, audio volumes might have been adjusted in my tracks but they are present. The problem is usually like ~2-5seconds, a random audio track can be heard (like music or narrate) or just no sounds at all. This makes it very difficult to work with the audio. Also I gotta say that this problem starts by simply having the 2-3 audio tracks.. In my recent project the only adjustment I used to edit the audio was fade in/out.
I don't have any other audio problems with any other programs.
I am more than happy to provide more information if needed. I hope this information helps.
In addition I can say that when I close Adobe Premiere Elements 12, it crashes. No idea why.
I have also looked up my firewall settings, anything involved adobe and premiere..
In addition some effects like HD text templates make "Adobe Media Core CS6" crash. I tend to just not use em, or if I need em, I add em at end of the edits.
I hope this helps, I would really like to solve this problem.
Thank you alot for taking the time to answer! I welcome anyone to help mee too! Please giev links to similar problems too. Thank you everybody!

Compressor - export to Blu-ray with more than 6 chapter Markers?

Similar Messages

Maybe you are looking for