Compressor fails .avi convert

Hi all,
I'm trying to batch convert .avi files to either Quicktime H.264 or DV NTSC. Both fail, and I can't figure out why.
When trying to convert to H.264, Compressor errors out with: "Quicktime Error: -120". When trying to convert to DV NTSC, Compressor errors out with: "Quicktime Error: 10006".
These error messages must mean something, so why not just output the error in human readable form instead of meaningless codes? Ridiculous.
I should also note that converting these files to DV NTSC succeeded in Quicktime. So Compressor failing makes no sense to me.
I need Compressor to work for me consistently. Why Quicktime would work and Compressor wouldn't is baffling. Don't they use the same engine to convert files?
Any help would be very much appreciated!

Hi Jon,
I actually got this fixed (somewhat) before reading you post. Thanks for your help though!
I ran Disk Utility, and repaired permissions. Like I suspected, Quicktime 7 barfed up all kinds of errors, including that the user was set to 501 instead of 0 (501 is a temp user, if memory serves me correctly).
I had moved beyond trying to batch convert, and was trying to send a project to Compressor from FCP. Compressor came up with an error stating that I could not save to my destination because I don't have read/write access to it (not true according to Get Info, and aside from the fact that "Ignore ownership on this volume" is selected). When I moved the destination to my Desktop, Compressor started the conversion, failed, and produced a file on my desktop that was immoveable and un-erasable. This file was not seen by the Terminal (I'm fairly handy at the command line). Weird.
So, I restarted, and that file disappeared. Compressor has just finished my conversion, and all is well with the world.
That is, expect that Compressor still tells me that I don't have write permissions to the source folder of my FCP project.
At this point, I'm just glad I could do the conversion (I'm on a deadline), but this is an issue that needs to be addressed. Assuming, of course, that I can replicate the issue.
And more to the point, I'd like to know how Quicktime 7 got so screwed up. I haven't used Compressor in a week, and it worked fine the last time I tried it. I also haven't messed with any settings, etc. so I'd like to know what the heck is going on.
I'm sure I'll be working with more .AVI files in the immediate future, so I'll try to repost with my experiences then.
Thanks again for your help Jon!
Josh

Similar Messages

SQL Exception: Fail to convert between UTF8 and UCS2: failUTF8Conv

Hi,
I am trying to use the DBMS_OBFUSCATION_TOOLKIT to encrypt/decrypt some strings through JDBC, but I am getting the following exception:
SQL Exception: Fail to convert between UTF8 and UCS2: failUTF8Conv
The input and output parameters for the encryption/decryption functions are VarChar2.
Our database is using UTF8.
I will be glad if someone can help me on this.
Thanks,
Cenk

Susi,
This is just a wild guess, but your java client is on a different computer to your Oracle 9.2 server, and the locale (or encodings) on the two computers is different. Am I correct? If so, then I guess you need to change the locales (or encodings) so that they match.
Have you tried printing out the "System" properties for the two JVMs (Oracle's and your client's)? Something simple like this:
System.getProperties().list()Good Luck,
Avi.

Conversion failed when converting date and/or time from character string

Hi experts,
I'm trying running a query in Microsoft Query but it gives the following error message:
"conversion failed when converting date and/or time from character string"
when asks me the data I'm inserting 31-01-2014
i've copy the query form the forum:
SELECT T1.CardCode, T1.CardName, T1.CreditLine, T0.RefDate, T0.Ref1 'Document Number',
     CASE WHEN T0.TransType=13 THEN 'Invoice'
          WHEN T0.TransType=14 THEN 'Credit Note'
          WHEN T0.TransType=30 THEN 'Journal'
          WHEN T0.TransType=24 THEN 'Receipt'
          END AS 'Document Type',
     T0.DueDate, (T0.Debit- T0.Credit) 'Balance'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')<=-1),0) 'Future'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=0 and DateDiff(day, T0.DueDate,'[%1]')<=30),0) 'Current'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>30 and DateDiff(day, T0.DueDate,'[%1]')<=60),0) '31-60 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>60 and DateDiff(day, T0.DueDate,'[%1]')<=90),0) '61-90 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>90 and DateDiff(day, T0.DueDate,'[%1]')<=120),0) '91-120 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=121),0) '121+ Days'
FROM JDT1 T0 INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode
WHERE (T0.MthDate IS NULL OR T0.MthDate > ?) AND T0.RefDate <= ? AND T1.CardType = 'C'
ORDER BY T1.CardCode, T0.DueDate, T0.Ref1

Hi,
The above error appears due to date format is differnt from SAP query generator and SQL server.
So you need convert all date in above query to SQL server required format.
Try to convert..let me know if not possible.
Thanks & Regards,
Nagarajan

Error "Conversion failed when converting date and/or time from character string" to execute one query in sql 2008 r2, run ok in 2005.

I have a table-valued function that run in sql 2005 and when try to execute in sql 2008 r2, return the next "Conversion failed when converting date and/or time from character string".
USE [Runtime]
GO
/****** Object: UserDefinedFunction [dbo].[f_Pinto_Graf_P_Opt] Script Date: 06/11/2013 08:47:47 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE FUNCTION [dbo].[f_Pinto_Graf_P_Opt] (@fechaInicio datetime, @fechaFin datetime)
-- Declaramos la tabla "@Produc_Opt" que será devuelta por la funcion
RETURNS @Produc_Opt table ( Hora datetime,NSACOS int, NSACOS_opt int)
AS
BEGIN
-- Crea el Cursor
DECLARE cursorHora CURSOR
READ_ONLY
FOR SELECT DateTime, Value FROM f_PP_Graficas ('Pinto_CON_SACOS',@fechaInicio, @fechaFin,'Pinto_PRODUCTO')
-- Declaracion de variables locales
DECLARE @produc_opt_hora int
DECLARE @produc_opt_parc int
DECLARE @nsacos int
DECLARE @time_parc datetime
-- Inicializamos VARIABLES
SET @produc_opt_hora = (SELECT * FROM f_Valor (@fechaFin,'Pinto_PRODUC_OPT'))
-- Abre y se crea el conjunto del cursor
OPEN cursorHora
-- Comenzamos los calculos
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
/************ BUCLE WHILE QUE SE VA A MOVER A TRAVES DEL CURSOR ************/
WHILE (@@fetch_status <> -1)
BEGIN
IF (@@fetch_status = -2)
BEGIN
-- Terminamos la ejecucion
BREAK
END
-- REALIZAMOS CÁLCULOS
SET @produc_opt_parc = (SELECT dbo.f_P_Opt_Parc (@fechaInicio,@time_parc,@produc_opt_hora))
-- INSERTAMOS VALORES EN LA TABLA
INSERT @Produc_Opt VALUES (@time_parc,@nsacos, @produc_opt_parc)
-- Avanzamos el cursor
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
END
/************ FIN DEL BUCLE QUE SE MUEVE A TRAVES DEL CURSOR ***************/
-- Cerramos el cursor
CLOSE cursorHora
-- Liberamos los cursores
DEALLOCATE cursorHora
RETURN
END

You can search the forums for that error message and find previous discussions - they all boil down to the same problem. Somewhere in your query that calls this function, the code invoked implicitly converts from string to date/datetime. In general,
this works in any version of sql server if the runtime settings are correct for the format of the string data. The fact that it works in one server and not in another server suggests that the query executes with different settings - and I'll assume for
the moment that the format of the data involved in this conversion is consistent within the database/resultset and consistent between the 2 servers.
I suggest you read Tibor's guide to the datetime datatype (via the link to his site below) first - then go find the actual code that performs this conversion. It may not be in the function you posted, since that function also executes other functions.
You also did not post the query that calls this function, so this function may not, in fact, be the source of the problem at all.
Tibor's site

After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and conver

After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.

You should install Camera Raw 4.6.
Visit this page and follow the instructions carefully:
PC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
-Noel

Compressor fails with Codec not installed error after 10.5.7 update

Problem: Compressor fails on submission to standard codecs such as H.264, Apple Intermediate Codec, Motion JPEG, etc. Codecs do exist on system as playback from QuickTime is unaffected. This is new behavior as of update to OS 10.5.7.
Specs: 17" MackBook Pro, Compressor 3.0.5, QuickTime 7.6, OS X 10.5.7
Attempt to resolve: Tried completely uninstalling Compressor/QMaster and reinstalling from the FCStudio disc as per "Compressor: Troubleshooting basics" (Article: TS1888 - Old Article: 302845). This installed Compressor 3.0 which compressed a single mov then began failing on subsequent submissions. Updated 3.0 to 3.0.5 with no favorable results. Submissions continue to fail.
Any ideas?

From my personal experience, the troubleshooting article which you mention in your original post does not constitute a "full uninstall". There are files missing from that list which are required for a full install.
Using the instructions in the link provided, I've been able to do multiple uninstalls & reinstalls successfully, not only with Compressor & QMaster, but with other Studio apps as well.
However, since there are codecs missing, you may need to do a full uninstall of Final Cut Studio. I personally haven't upgraded to 10.5.7 yet, since I'm currently in the middle of some projects, but it would be worth mentioning that before any kind of software upgrades, all of our system drives get a full backup. This allows us a way to "undo" any bad upgrade.

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM         ODPO AS T0 LEFT OUTER JOIN
                      VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
     OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
                      VPM1 AS T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'

Hi,
Try this:
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM         ODPO T0 LEFT OUTER JOIN
                      VPM2 T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
LEFT OUTER JOIN
     OVPM T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
                      VPM1 T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
group by T0.DocStatus,T0.DocDate ,
T0.DocNum ,
T0.NumAtCard,
T0.TransId ,
T0.Comments ,
T0.CardCode,
T0.CardName ,
T0.WTSum ,
T3.DueDate ,
T3.CheckSum
Thanks & Regards,
Nagarajan

Display in PDF Browser - Item failed to convert in Outlook

Display in PDF Browser - Item failed to convert in Outlook
ben soules - 09:26pm Aug 22, 2007 Pacific
Hi Experts,
This is a bit of a pain I have to distrubte
Adobe Acrobat Pro 8.1 to about 3000+ users and I am having a problem,
In Prefs in "Adobe Acrobat Pro 8.1"
When I tick then untick, "display in PDF Browser" from the Preferences, My Outlook will fail to convert to PDF. I get an "Item failed to convert" message and a log file. Also Word 2003 will not post a .PDF to an email.
If I restart "Outlook 2003" it will create a "pdf" when I click the icon the first time, the second time I click it will fail.
Please help.
===================================================
Requested: 1,
Converted to PDF: 0,
Skipped [Already in PDF]: 0,
Skipped [PDFMaker failed to convert]: 1
Details of Email to PDF conversion:
Failed to Convert:
From: WS XXXX XX XXXXXXX, Subject: FW: testing, Date: 8/08/2007, Status: Item failed to convert

We also deployed 8.12 to over 1000 users with the "Disable PDF in browser" option checked using the customization wizard. Now we're finding some users need it to view certain PDFs in a web-based application.
We would like to add the option, but removing the registry key doesn't actually install the option when you check it. It seems you might have to create a new mst then redeploy. We'd really like to not have to do that, if at all possible.
In the Reader archives, one guy suggested running this:
msiexec /i Adobe_Reader_8.1_MUI.msi ADDLOCAL=ReaderBrowserIntegration
I haven't tried that yet. Any feedback or other suggestions?
E Long
Austin, TX

TS3844 compressor failed Log. Pls help! ?xml version="1.0" encoding="UTF-8" standalone="yes"? logs tms="357248472.250" tmt="04/27/2012 15:41:12.250" pnm="Batch%20Monitor" log tms="357248472.250" tmt="04/27/2012 15:41:12.250" pid="7121" kind="mrk" sub=

COMPRESSOR Failed Log....Pls help!

digital rebellion has a crash analyzer that's part of Pro Maintenance Tools
http://www.digitalrebellion.com/promaintenance/
There's a free trial, but it's worth every penny.

Why .pdf file, created by Acrobat Distiller 10.1.2. (Windows) failed to convert to MS Word

I tried to convert .pdf file to MS Word, but it failed.
I noticed in a previous discussion on that topic that this converter ccnnot work with
.pdf files cteated by certain producers
My was created by Acrobat Distiller 10.1.2. (Windows)
Is that a rogue producer too?
Thanks
Alexey Kovalev

At this point, try Acrobat XI Pro to see if you can convert the document there. A 30-day trial of Acrobat XI Pro is available here:
www.adobe.com/go/tryacrobatpro/
If the file fails to convert with Acrobat, it may be corrupted. How did you get this PDF?
-David

Fail to convert between UTF8 and UCS2

: java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv
(BC4J throws that exception)
I got that error message when try to show the table's content in uix page.
I use varchar2(40). the error occurs, when i set special characters like õ,ü,Ü.. and so on.
This affects only UTF encoded database.
We use: 9.0.2.5, Jdev9.0.3.3., UIX, iAS 9.4.2??(i dont'know)
As i know the problem is when there is 40 letters in the column and it contains "special character" it can't convert it, because the neccessary space requered to store values is much more.
If i use nvarchar, i don't think it fix this problem.
And as i know, all sql constant must use where coulmn=N'constans value' format.
Q:
How can i set the UTF database and BC4J to run correctly.
I mean... what type to use, what is the column size to set.
Thanks in advice,
Viktor

I had the same problem using Oracle 9i. The problem lied within the Oracle JDBC driver itself! --;
If you're using JDBC driver from Oracle 9i, stop using it!
You should download JDBC driver of Oracle 10g from Oracle site and use that driver instead.
After I changed the driver, I now have no problem of getting Korean characters from the database.
Hope this would solve your problem too.

Fail to convert between UTF8 and UCS2: failUTF8Conv

We need to store possibly all UTF8 chararacter in his database
especially $ & ( 4 8 < = > from WE8ISO8859P1 and from WE8ISO8859P15.
So we install an UTF8 instance and set NLS_LANG to UTF8.
We have to do select/update from a java client and sqlplus(like).
When we insert with java client it's unreadable from sqlplus and
when whe insert from sqlplus we've got 'Fail to convert between UTF8 and UCS2: failUTF8Conv '
here the code made in sqlplus
update CPW_TEST set lb_comportement='$ & ( 4 8 < = > ' WHERE ID_TEST=14805;
here the code made in java
update CPW_TEST set lb_comportement='$ & ( 4 8 < = > ' WHERE ID_TEST=14804;
and then the result in database
SELECT id_test,LB_COMPORTEMENT FROM CPW_TEST WHERE ID_TEST=14804 or ID_TEST=14805
ID_TEST LB_COMPORTEMENT
14804 B$ B& B( B4 B8 B< B= B> B
14805 $ & ( 4 8 < = >
2 rows selected
and the dump
SELECT id_test,dump(LB_COMPORTEMENT) FROM CPW_TEST WHERE ID_TEST=14804 or ID_TEST=14805
ID_TEST DUMP(LB_COMPORTEMENT)
14804 Typ=1 Len=26: 194,164,32,194,166,32,194,168,32,194,180,32,194,184,32,194,188,32,194,189,32,194,190,32,194,128
14805 Typ=1 Len=17: 164,32,166,32,168,32,180,32,184,32,188,32,189,32,190,32,128
2 rows selected
I'm not sure, but it seems that sqlplus uses true UTF8 (variable length codes) and java client uses UCS-2 (2 bytes)
How can I solve my problem?
Our configuration
javaclient (both thin and oci jdbc driver 8.1.7), sqlplus client and database Oracle 8.1.7.0.0 on the same computer (W2000 or NT4)
Thank you for yoru attention.

Hi Luis, thanks for your suggestions. You're right that problem was in JServ and his JVM.
There was conflict between different versions of Java. While iFS was using JRE 1.3.1, JServ was configured to use JRE 1.1.8. As soon as I corrected link to the right Java, problem disappears.
Radek

Java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv

Hi all,
I am writing a servlet that connects to Oracle 8.0.6 through jdbc for jdk1.2 on NT 4.0
English version and it works fine.
But when the servlet is deployed to a solaris with Oracle 8.0.5 (not a typo, the oracle on
NT is 8.0.6 and oracle on solaris is 8.0.5) and jdbc for jdk1.2 (of course, for Solaris),
the servlet failed with the Exception:
java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv
(I am using JRun 3.0 as the application and web server for both NT and Solaris)
(The database in both the NT and solaris platform are using UTF8 charset)
My servlet looks like this: (dbConn is a Connection object proved to be connected to Oracle
in previous segment of the same method):
String strSQL = "SELECT * FROM test";
try { Statement stmt = dbConn.createStatement();
ResultSet rs = stmt.execute(strSQL);
while (rs.next()) {
out.println("id = " + rs.getInt("id"));
System.out.println("id written");
out.println("name = " + rs.getString("name")); // <-- this is the line the
exception is thrown
System.out.println("name written");
} catch (java.sql.SQLException e) {
System.out.println("SQL Exception");
System.out.println(e);
The definition of the "test" table is:
create table test(
id number(10,0),
name varchar2(30));
There are about 10 rows exists in the table "test", in which all rows contains ONLY chinese
characters in the "name" field.
And when I view the System log, the string "id written" is shown EXACTLY ONCE and then there
is:
SQL Exception
java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv
That means the resultset is fetch back from the database correctly. The problem arise only
during the getString("name") method.
Again, this problem only happens when the servlet is run on the solaris platform.
At first I would expect there are some strange code shown on the web page rather than having
an exception. I know that I should use getBytes to convert between different encodings, but
that's another story.
One more piece of information: When all the rows contains ascii characters in their "name"
field, the servlet works perfectly even in solaris.
If anyone knows why and how to tackle the problem please let me know. You can feel free to
send email to me at [email protected]
Many thanks,
Ben
null

Hi all,
For the problem I previously posted, I found that Oracle had had such bug filed before in Oracle 7.3.2 (something like that) and is classified to be NOT A BUG.
A further research leads me to the document of Oracle that the error message:
"java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv"
is a JDBC driver error message of error number ORA-17037.
I'm still wondering why this behaviour will happen only in Solaris platform. The servlet on an NT machine I am using (which has an Oracle 8.0.6 and jdbc for jdk 1.2 running) is working just fine. I also suspect that this may be some sort of mistakes from jdbc driver.
Nevertheless, I have found a way to work around the problem that I cannot get non-English string from Oracle in Solaris and I would like to share it with you all here.
Before I go on, I found that there are many people out there on the web that encounter the same problem. (Some of which said s/he has been working on this problem for a month). As a result, if you find this way of working around the problem does help you, please tell those who have the same problem but don't know how to tackle. Thanks very much.
Here's the way I work it out. It's kinda simple, but it does work:
Instead of using:
String abc = rs.getString("SomeColumnContainsNonEnglishCharacters");
I used this:
String abc = new String(rs.getBytes("SomeColumnContainsNonEnglishCharacters"));
This will give you a string WITH YOUR DEFAULT CHARSET (or ENCODING) from your system.
If you want to convert the string read to some other encoding type, say Big5, you can do it like this:
String abc = new String(rs.getBytes("SomeColumneContainsNonEnglishCharacters"), "BIG5");
Again, it's simple, but it works.
Finally, if anyone knows why the fail to convert problem happens, please kindly let me know by leaving a word in [email protected]
Again, thanks to those of you who had tried to help me out.
Creambun
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by creambun creambun ([email protected]):
Hi all,
I am writing a servlet that connects to Oracle 8.0.6 through jdbc for jdk1.2 on NT 4.0
English version and it works fine.
But when the servlet is deployed to a solaris with Oracle 8.0.5 (not a typo, the oracle on
NT is 8.0.6 and oracle on solaris is 8.0.5) and jdbc for jdk1.2 (of course, for Solaris),
the servlet failed with the Exception:
java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv
(I am using JRun 3.0 as the application and web server for both NT and Solaris)
(The database in both the NT and solaris platform are using UTF8 charset)
My servlet looks like this: (dbConn is a Connection object proved to be connected to Oracle
in previous segment of the same method):
String strSQL = "SELECT * FROM test";
try { Statement stmt = dbConn.createStatement();
ResultSet rs = stmt.execute(strSQL);
while (rs.next()) {
out.println("id = " + rs.getInt("id"));
System.out.println("id written");
out.println("name = " + rs.getString("name")); // <-- this is the line the
exception is thrown
System.out.println("name written");
} catch (java.sql.SQLException e) {
System.out.println("SQL Exception");
System.out.println(e);
The definition of the "test" table is:
create table test(
id number(10,0),
name varchar2(30));
There are about 10 rows exists in the table "test", in which all rows contains ONLY chinese
characters in the "name" field.
And when I view the System log, the string "id written" is shown EXACTLY ONCE and then there
is:
SQL Exception
java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv
That means the resultset is fetch back from the database correctly. The problem arise only
during the getString("name") method.
Again, this problem only happens when the servlet is run on the solaris platform.
At first I would expect there are some strange code shown on the web page rather than having
an exception. I know that I should use getBytes to convert between different encodings, but
that's another story.
One more piece of information: When all the rows contains ascii characters in their "name"
field, the servlet works perfectly even in solaris.
If anyone knows why and how to tackle the problem please let me know. You can feel free to
send email to me at [email protected]
Many thanks,
Ben<HR></BLOCKQUOTE>
null

SSRS error "Conversion failed when converting the nvarchar value"

Hi folks!
After SCCM 2012 R2 upgrade, we have errors with self made reports:
An error has occurred during report processing. (rsProcessingAborted)
Cannot read the next data row for the dataset DataSet2. (rsErrorReadingNextDataRow)
Conversion failed when converting the nvarchar value '*****' to data type int.
I found several articles to see reporting services log file for possible WMI related errors, but none exists. SQL server is 2008R2, Runned mofcomp, and re-installed reporting services role, but problem remains.
I traced the dataset2 query:
SELECT
v_Collection_Alias.CollectionID ,v_Collection_Alias.Name
FROM fn_rbac_Collection(@UserSIDs) v_Collection_Alias
WHERE
v_Collection_Alias.CollectionType = 2
Any adwice is appreciated.
~Tuomas.

Hi Tuomas,
What's the SQL Server version? To verify the the SQL Server version, please see
http://support.microsoft.com/kb/321185
SCCM 2012 R2 need SQL Server 2008 R2 SP1 with CU 6 or SQL Server 2008 R2 with SP2 (http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSQLSrvReq).
If the SQL meets requirement, I would suggest you submit a thread to SQL forum to deal with the sql issue.
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

ActionScript 3.0: Error #1034: Type Coercion failed: cannot convert displayObject$ to DefaultPackage

I'm a student I have a final project want to deliver it after two days.
I'm making a drag and drop game, I watched a tutorial to do that.
But after ending coding I faced a weird error!
I've I checked that my code is the same as the code in the tutorial.
This is the Debug error report:
    Attempting to launch and connect to Player using URL E:\FL\ActionScript\Drag and Drop Project\DragAndDrop.swf
    [SWF] E:\FL\ActionScript\Drag and Drop Project\DragAndDrop.swf - 87403 bytes after decompression
    TypeError: Error #1034: Type Coercion failed: cannot convert paper1$ to DragDrop.
              at Targets()[E:\FL\ActionScript\Drag and Drop Project\Targets.as:23]
My `.fla` File is containing 12 Objects to drag and another 12 Objects to drop on it.
The idea here is when drop the Object on the target the Object will become invisible and the target become visible (in `.fla` file `target alpha = 0`).
I made two classes:
DragDrop.as : for the objects that I'm going to drag.
Targets.as : for the targets that I'm going to drop Objects on it.
Note: match function is to animate "GameOver" MovieClip When complete the game.
DragDrop.as:
    package
              import flash.display.*;
              import flash.events.*;
              public class DragDrop extends Sprite
                        var origX:Number;
                        var origY:Number;
                        var target:DisplayObject;
                        public function DragDrop()
                                  // constructor code
                                  origX = x;
                                  origY = y;
                                  addEventListener(MouseEvent.MOUSE_DOWN, drag);
                                  buttonMode = true;
                        function drag(evt:MouseEvent):void
                                  stage.addEventListener(MouseEvent.MOUSE_UP, drop);
                                  startDrag();
                                  parent.addChild(this);
                        function drop(evt:MouseEvent):void
                                  stage.removeEventListener(MouseEvent.MOUSE_UP, drop);
                                  stopDrag();
                                  if(hitTestObject(target))
                                            visible = false;
                                            target.alpha = 1;
                                            Object(parent).match();
                                  x = origX;
                                  y = origY;
Targets.as:
    package
              import flash.display.*;
              import flash.events.*;
              public class Targets extends MovieClip
                        var dragdrops:Array;
                        var numOfMatches:uint = 0;
                        var speed:Number = 25;
                        public function Targets()
                                  // constructor code
                                  dragdrops = [paper1,paper2,paper3,paper4,paper5,paper6,
                                                                 paper7,paper8,paper9,paper10,paper11,paper12,];
                                  var currentObject:DragDrop;
                                  for(var i:uint = 0; i < dragdrops.length; i++)
                                            currentObject = dragdrops[i];
                                            currentObject.target = getChildByName(currentObject.name + "_target");
                        public function match():void
                                  numOfMatches++;
                                  if(numOfMatches == dragdrops.length)
                                            win.addEventListener(Event.ENTER_FRAME, winGame);
                        function winGame(event:Event):void
                                  win.y -= speed;
                                  if(win.y <= 0)
                                            win.y = 0;
                                            win.removeEventListener(Event.ENTER_FRAME, winGame);
                                            win.addEventListener(MouseEvent.CLICK, clickWin);
                        function clickWin(event:MouseEvent):void
                                  win.removeEventListener(MouseEvent.CLICK, clickWin);
                                  win.addEventListener(Event.ENTER_FRAME, animateDown);
                                  var currentObject:DragDrop;
                                  for(var i:uint = 0; i < dragdrops.length; i++)
                                            currentObject = dragdrops[i];
                                            getChildByName(currentObject.name + "_target").alpha = 0;
                                            currentObject.visible = true;
                                  numOfMatches = 0;
                                  addChild(win);
                        function animateDown(event:Event):void
                                  win.y += speed;
                                  if(win.y >= stage.stageHeight)
                                            win.y = stage.stageHeight;
                                            win.removeEventListener(Event.ENTER_FRAME, animateDown);
...Thanks

Thank you very much for replying.
- dragdrops represents: the dragable objects.
- Targets obtaining the dropable objects by hitTestObject, then the dropable objects visible is turned to false, & the target visible turned to true.
Dragable objects is a 12 elements all of them have an instance names: paper1....paper12.
When I focused to the project I noticed that I forget to give the dragable objects an instance names!
after making the instance names to them, a new error occures:
E:\FL\ActionScript\Drag and Drop Project\Targets.as, Line 11
1046: Type was not found or was not a compile-time constant: paper1.
This error is continuing to paper2, paper3.....paper12 !
Please download my project, I must deliver it to my college in 24/12. I will never forget your favor. thanks.
https://www.dropbox.com/s/8mdg5w17vvryzso/Drag%20and%20Drop%20Project.rar | 715KB

Compressor fails .avi convert

Similar Messages

Maybe you are looking for