Compressor Job Fail Quicktime Error -120

The program quits before it even starts compressing after I click "Submit" There is no error message or any indication of why the attempt failed. Except a grey message to the side that says QuickTime Error -120
I'm using the presets. Trying to convert a QT movie (Current Settings) to a YouTube file.
Still using Compressor 3.5.3
OS 10.5.8
I trashed the prefs and started over, but the same error continues to occur.
It's odd, this is the first time it's happening. I'm taking following the same steps I've always taken.

OK.. just now out of curiosity I went back into my prefs.
Deleted 2 Quicktime P.Lists
Deleted Compressor P.List again
And just for the heck of it deleted my Final Cut User Data and Final Cut P.List
Instead of putting the word YouTube in the file name for either name, I took that out.
Clicked Submit and renamed the file once.. then the second drop down asked me to rename and I named it a different name with no spaces.
Now it's processing fine.
Not sure what I did, but something worked.

Similar Messages

Compressor 4 Failed Quicktime Error -50

I know, I've looked for this error in the archives and can't pinpoint what's going on. I can upload a video to my Vimeo and YouTube accounts from Final Cut Pro X but if I try to upload one from Compressor, big fail. I have been able to make it work before but apparently this is not a good week for Compressor. I trashed my preferences, ran Compressor Repair and no love. Any recommendations? Compressor 4 has been nothing but frustrating for me. I use both the Compressor templates and made my own custom settings and still... sometimes it will work, sometimes it won't. This week? No.

From your description (except for your subject title) it sounds like the file is encoded but it doesnt take the next step to the job action…or is it that the upload starts but doesn't complete?
On a "good week" for Compressor what kind of jobs are you typically submitting…other than Web Sharing for You Tube?
Russ

Compressor keeps failing - "Quicktime Error 0"

Hi all
Compressor 1.2.1 has decided to start playing up - whenever I submit a sequence from FCP HD 4.5, and use any of the mpeg2 presets (or indeed a custom preset) the Batch Monitor opens fine but the batch fails almost immediately, with the error message:
"QuickTime Error: 0"
Neither Compressor or Batch Monitor are crashing, the encodes are just failing. I've tried exporting from several different sequences in different projects, and they all fail.
One of the sequences is only 20 seconds long, just a clean clip captured from tape, no added effects, transitions or edits. So it's not that there's a tricky or dodgy bit of rendering or processing in the middle of the sequence that's making it stumble.
My sequence video setting is Uncompressed 8-bit 4:2:2 - could Compressor be having problems with uncompressed video? Seems unlikely...
Oddly, the mpeg-1 preset in Compressor seems to work fine, it only fails on the mpeg-2 presets.
Any ideas how to fix this?
Dual 2.5 GHz PowerPC G5 Mac OS X (10.4.6)

Im have the same problem as well. Did you guys ever figure out how to resolve the issue?
It seems like this error came up alot in previous versions of fcp, and it was tied to currupt/missing render files or missing mpeg2 components. I think the error is a bit different for fcpx. Ive tried everything I can think of as well.
Thanks,
Carlton
Project is 1080p - 1 Hour:45 - from canon dslr

Compressor error - Failed: Quicktime error 0

I'm sending my FCP sequence directly to Compressor and I'm getting this message after I submit: "Failed: Quicktime error 0". It's a 34 minute sequence. I'm using DVD Best Quality - 90 Minutes as my setting. I've googled this error and I'm seeing some folks suggest that there may be a corrupt file in the FCP sequence. Others say that it may be an insufficient RAM issue (not my issue). My questions:
- Has anyone seen this before? If so, how did you resolve?
- If this is due to a corrupt file, how would I go about finding that corrupt file?
Any help would be appreciated. I'm up against a deadline about to get into panic mode. thanks!

Michael,
Try cutting your sequence into ten minute segments to narrow down the problem, if indeed it is a corrupt clip or file.
You may also want to post your sequence settings, also do you have any stills in your timeline, if you do are they in RGB color space and not CYMK
DM

Compressor issue, keep getting Failed: QuickTime error.-50. Anyone knows why?

Compressor issue, keep getting Failed: QuickTime error.-50. Anyone knows why?

I have this problem too, I sent a 1hr long video to Compressor from FCP and trying to save it in H.264
If works for a few hours and then says it failed.
Any help would be much appreciated!

Compressor: Failed: QuickTimer Error: 0

When compressing with Compressor I get error message: Failed: QuickTime Error: 0
This happens when I am exporting from Final Cut Pro HD (photo Jpeg video), and also when I am compressing from Final Cut movie file (with current settings and not self contained).
Does anyone know what this error message means?
Cinema Craft encoded same files without problem!
Powemac G5, dual 2Ghz, 1.5 GB ram, 150 gb free disk space, OS X 10.4, all software with latest updates (freshly installed on formated drive)! I have even tried to turn off one processor with CHUD tool.
On G4 dual 1Ghz, 768 MB ram, OS X 10.3 works OK.
Thank you!

Use the System Profiler to review what is in the system and console logs. You may find a message or error there that will tell you more about what is happening. Note, there will almost certainly be other warnings or errors in these logs, that's fairly normal, you want to look for something that is related to QuickTime or Compressor (et.al.) or one of the files you are trying to process.

QuickTime Error: -120

Haven't seen this error in the searches (QuickTime Error: -120), but got it this morning trying to export an H.264 video from FCS. Using QT 7.3 and FCS 1. Compressor fails after submitting the batch...the cluster is This Computer. Haven't done any upgrades recently. It worked on Friday.
Any thoughts?
Jonathan

Thanks for the updated posts... the old thread fixed my problem. I don't know where this error -120 is coming from because I had already compressed this material yesterday, I just made some tweaks to the project and was compressing the new version. It's mysterious, but the Reset Background Processing cured my ills.

Failed: QuickTime Error: 0

For about 2 months now I've been trying different ways to burn this movie I have. Everytime I try to convert it into a Mpeg 2 file I get the message "Failed: QuickTime Error: 0". I recognized some glitchy video. Is there anything I can do? Cand I somehow get rid of the glitchy video or this problem? Thanks.

Greetings Carcharias:
I've been where you have been with my setup. Here's my setup: G5 Dual 2.0 with 3.5Gigs memory, OS 10.3.9., FCP 4.1.1, Compressor 1.2.1 (tried Compressor 1.2 also with same problem), Batch Monitor 1.2.1., QT 7.0.3. I do not have QT Pro.
I've communicated to Apple with this very problem. They've not sent me any findings. It's been a long road for me, but I believe I have discovered the fix for this machine a couple weeks ago that was never mentioned in any other posts I've diligently searched. I've only seen about 3 other different fixes in all. This one I found in the Compressor Help manual --the .pdf file. located in the menu bar.
Interesting as it sounds, plain instructions tell you in the Late-Breaking News About Compressor 1.2 that when upgrading, and most likely any upgrade to any version, new presets must be enabled. Pg 2 says after upgrading to 1.2 to go into the Compressor folder located in the home folder>Library>Application Support>. In here, you'll see all the presets that are used within Compressor. Everything must be deleted in order for it to regenerate a new preset folder when an upgrade is performed.
Well, I've never done this and after coming this far, I surely thought this can't be it? I've had the failed: quicktime error: 0 error over and over till I was blue in the face. The first time I remember it going about 30 min till it stopped and popped this error. Other times after that, the batch stopped inside 3 minutes and then sometimes just seconds or even one second. And even with that it will always encode the audio without fail. I don't know the reason for that. But it has encoded the video to a 19 sec clip successfully on one test.
So with Compressor quit out of, simply delete the folder entirely, empty the trash and relaunch Compressor. It will automatically rebuild this folder with the new presets. Just read carefully for yourself in the Compressor Help .pdf manual located in the help menu.
After doing so and I did restart my computer, I lined up two lengthy jobs -- a 132 min. and 85 min job, back to back it encoded both at the highest setting in 10.5 hrs. I've a G4 17" 1.33Ghz Powerbook with identical software versions (already installed when I bought it) and 1 gig of ram. It would spend 24 hrs on the 132 min job with same setting. Yes, generally, Compressor is slow by professional standards, but I believe it does quite well considering its price with either suite it's offered.
I'm interested to hear from others if this part of the mystery was simply overlooked. Since this fix, I have still encountered this error, but it was on media that was originally brought over from iMovie 5.0.2. exported to QT. But it's still a mystery as to why my G4 PB 1.33 will tame it just fine, but with a good time wait. The PB has never encountered this error.
Sincerely,
Darin Koch

Failed: QuickTime Error: -108

Everytime I try to use Compressor to create a file using the 'HD for Apple Devices (10 Mbps). it fails within seconds with an error message of 'Failed: QuickTime Error: -108' . I only get this on my MacPro 12 core. The Macbook doesn't have this issue. I guess the error lies within Quicktime itself. Any suggestions appreciated!

OK, Compressor should show up in the list when you click the Purchases button:
The official way to reinstall is to hold down the Option key while you click the Purchases button. I assume it looks to see if it's installed. If it isn't, then it says Install at the right instead of Installed. Again, this is assuming you've trashed the original program from the Applications folder. I can't remember if it's enough to put it in the trash, or if you have to actually empty the trash, or if it also works if you've copied the App file to an external disk and then disconnect that.
If yours is not working this way, or if Compressor is not even showing up, then I think one of two things is going on. #1 - is it possible that you have two different Apple IDs and you're signed in with the one that did not make the Compressor purchase? or #2 - there is a problem with your Apple Account and you're going to have to get help from tech support. If it's the correct account but it does not remember what you have purchased, then you need to get that straightened out.
I'm sorry that you're having these glitches, but this is the accepted technique for reinstalling - I've done it myself.

Failed Quicktime Error -2045

FCP X and Compressor 4 will no longer generate a movie file when I submit it. I cannot get a movie to generate from FCP X either. Instead, I get an error after submitting that says Failed: QuickTime Error: -2045.
I have uninstall and reinstall FCP X, Compressor and Motion. Until Saturday I was able to generate movies without a problem.
Does anyone know what this error means and how I can correct?

I found my answer for this. Not sure if it will help everyone, but I was getting Failed with a zero code and with -2045 code. I did the uninstall and reinstall of FCP X and Compressor to no avail. But I also was running FX Factory from Noise Industries. When I deleted it (have to use the Uninstall Button on their menu and not just drag it to trash bin) then my error went away. It seems that one of the filters it put in added an invalid plug in to Quicktime and that was causing the error.
The Apple help guy had me create a new user account and run the same routine there. Since I had no error on the new user, the logic was that it was a plug in issue for my main account. So once I uninstalled the FX Factory app and its plug ins, then I was back in business. I am going to try to reinstall FX Factory later to see if I can get my Phyx filters back, but at least I am transcoding movie files again.

Mpeg4 compression failed (QuickTime Error: -50)

I was trying to compress this 3 minute long clip using "MPEG-4 Improved NTSC Small Progressive" setting but it always failed, and in the log/history i always find the following status:
Failed: QuickTime Error: -50
I have tried another MPEG4 configuration, and some seems to work (NTSC for CD) and some don't (NTSC for fast cable streaming, NTSC Large Progressive). Has anyone experienced this before? Any help or advice? Here is my configuration:
Compressor 1.2.1
Final Cut Pro 4.5
QuickTime 7

The latest version of QuickTime is 7.0.2 and you'll also want to update to the latest Pro Apps support package (link follows for Mac OS X 10.4.X):
http://www.apple.com/support/downloads/proapplicationsupport30macosx104.html
You may already be up to date and even if not this may not solve your problem, but it would be a first step before trying other things.

Failed: quicktime error -50

I tried to share sending to apple tv and also used compressor for H.264 for apple tv and i keep getting a failed: quicktime error -50 ... i also tried to use compressor and make it a fast encode dvd and im getting errors also cannot figure out what is going wrong .. this is a somewhat short video 12min i am using fcp 7.0 on MP quad 2.66ghz , 12gb ram osx 10.5.8 and i have QT 7.6.2
help i need to get this project out ASAP
thx

-50 paramErr Error in user parameter list.
This is a File System error. Check the integrity of your drives using Disk Utility > Verify Disk.
Post any messages that Disk Utility presents to you, here. Copy the text exactly.
Also post how much free space is available on the drives.

Compressor Jobs fail

Everytime I upload or analyze a file to my FCS I get a,
Encountered error using Compressor: /././HAL/DVCPROHDAudio.plugin/Contents: dlopen
error.
I can run Compressor jobs locally on my FCS Box, but every job that goes through the final cut server system fails. If I watch the server's Dock, while the jobs are running through compressor bounces in the dock but never launches.
I've uninstalled FCServer using FCS remover and reinstalled, no help at all.
Anyone had this issue before? I saw one thread on the boards that was similar but the stated solution (uninstall, reinstall) did not work for me.

Unfortunately, this did not solve the issue. I can now ingest content but when using Duplicate to create another instance of a media asset transcoded in a different format I get.
"Error: EREQERROR Compressor job resulted in error - Failed"
Has anyone seen this before?

HELP - batch fails - quicktime error 0

Hi, I sent a qt file from final cut to compressor and tried to used the dvd - mpeg2 best quality 90mins setting.I have tried 3 times and every time, about halfway through, it stops and says "failed: Quicktime error 0. I'm trying to make a file for dvdsp. Im not sure what else to try
Many thanks

There is probably something terribly wrong at that point in your movie. Bad media file, bad render, missing font, no way to know from here.
bogiesan

OIM - Reconciliation jobs fail with Error: OPERATIONS_ERROR

Hi,
after integrating OIM with OAM for Fusion Apps provisioning (11.1.3), LDAP Reconciliation jobs fail with error OPERATIONS_ERROR.
Connection to LDAP looks OK, new users created in OIM are synchronized to LDAP, just Reconciliation jobs fail:
<May 1, 2012 10:00:50 AM CEST> <Error> <oracle.iam.platform.entitymgr.provider.ldap> <IAM-0042016> <An error occurred while getting the change log from LDAP - {0}
javax.naming.NamingException: Error: OPERATIONS_ERROR
Virtualization Session closed [Root exception is oracle.ods.virtualization.service.VirtualizationException: Virtualization Session closed]
at oracle.ods.virtualization.jndi.OVDUtil.mapErrorCode(OVDUtil.java:200)
at oracle.ods.virtualization.jndi.OVDContext.search(OVDContext.java:439)
at oracle.ods.virtualization.jndi.OVDContext.search(OVDContext.java:329)
at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:248)
at oracle.iam.platform.entitymgr.provider.ldap.LDAPUtil.search(LDAPUtil.java:1049)
at oracle.iam.platform.entitymgr.provider.ldap.LDAPDataProvider.getChangelogResults(LDAPDataProvider.java:1531)
at oracle.iam.platform.entitymgr.provider.ldap.LDAPDataProvider.deltaDetect(LDAPDataProvider.java:1488)
at oracle.iam.ldapsync.scheduletasks.user.LDAPUserChangesReconTask.execute(LDAPUserChangesReconTask.java:152)
at oracle.iam.scheduler.vo.TaskSupport.executeJob(TaskSupport.java:145)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:196)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
Caused By: oracle.ods.virtualization.service.VirtualizationException: Virtualization Session closed
at oracle.ods.virtualization.service.DefaultVirtualizationSession.checkActiveAndIncrementOp(DefaultVirtualizationSession.java:425)
at oracle.ods.virtualization.service.DefaultVirtualizationSession.search(DefaultVirtualizationSession.java:183)
at oracle.ods.virtualization.jndi.OVDContext.search(OVDContext.java:429)
at oracle.ods.virtualization.jndi.OVDContext.search(OVDContext.java:329)
at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:248)
at oracle.iam.platform.entitymgr.provider.ldap.LDAPDataProvider.deltaDetect(LDAPDataProvider.java:1488)
at oracle.iam.ldapsync.scheduletasks.user.LDAPUserChangesReconTask.execute(LDAPUserChangesReconTask.java:152)
at oracle.iam.scheduler.vo.TaskSupport.executeJob(TaskSupport.java:146)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:198)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
===
Reconciliation worked before integrating OIM with OAM.
Any ideas what could be wrong - or how to investigate this issue?
Thanks
Daniel

OVD changelog adapter was OK, but OVD URL was missing in the IT resource.
Reconciliation works now.
Thanks for pointing me to correct direction.
Daniel

Compressor Job Fail Quicktime Error -120

Similar Messages

Maybe you are looking for