Compressor makes terrible interlace-lines !!!! Help !!!!

Compressor makes terrible interlace-lines in moving parts of th video, when I want to encode my ready cut video from Final Cut for DVD Studio.
I export my video - DV PAL 720x576 16:9 anamorph - as usual as a Quicktime-mov. This Quicktime is still ok!
Then for encoding to Mpeg-2 I use Compressor 3.0.1:
DVD Best Quality 90 min - MPEG-2; 6,2 MBit/s; 2-Pass.
The result has terrible lines in themoving parts of th video !!!
What is wrong? Help!

Have you tried changing your frame control settings, to deinterlace the video?
Have a look at these settings.
If you want even better results, set the Deinterlace method to Best (Motion compensated).
It is important to change the Output fields from Same as source to Progressive, if you want the deinterlacing to have any effect.

Similar Messages

FCP has obvious interlaced lines!!!! HELP!

i would be editing a movie in FPC show with panasonic Gs-320 with 29 frames per second and in FCP everything looks PERFECT!! but then when i render it it has really bad interlaced lines whenever an object moves fast. is there any way i can get rid of these?
any answer will help!!

Well, first off your camera records 29.97fps...that is 30fps running at 29.97 (slightly slower...but that is a story in itself). And that camera shoots interlaced...unless you chose a progressive setting, if that camera even has a progressive setting. And this interlacing you don't see when playing in the camera viewfinder or on a TV because they are designed to play back interlaced properly. Computer monitors are not...so they show the interlacing in a not-so-pretty matter. If you want to see what you really have you need to send the signal through your camera to a TV.
Shane's Stock Answer #8: External Monitor Viewing
If you are working with DV, this is simple. First connect your computer to a camera or deck via firewire, Then connect the camera/deck to your TV/Monitor via RCA or S-Video.
Then start up your camera and tv, then open fcp.
Go to the View Menu, choose > External video > all frames
VIEW>Video playback should be Apple firewire NTSC (If you are using an NTSC set)
VIEW>Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section.
If you are working with HDV footage, FCP 6 allows you to view this via firewire, but ONLY as downconverted DV. It won't look the best, but you can see it. To do this,
If you need to view any format other than DV at full resolution, then you need to look into capture cards. Several standard definition and high definition models are available from www.aja.com and www.decklink.com. With these options you'll need a proper monitor to view full broadcast colors, but all models allow for realtime standard definition downconvert, allowing you to view HD on an SD monitor.
The Matrox MXO is another option that is output only, but allows you to view your footage on an Apple Cinema Display at full broadcast quality.
Shane

Exported footage has major interlaced lines!

Hi, I was hoping somebody could help me with this encoding problem.
I'm using Premiere Pro CS4 and when I export my video using the "MPEG2-DVD PAL Progressive Widescreen High Quality" preset, the resulting video has major interlaced lines when playing back on my DVD player. I confirmed the progressive option was selected in the advanced video options.
I'm not sure what could be causing this since the source footage is supposed to be progressive (HDCPRO HD at 720p) and all the project and sequence settings are progressive. Here's the details:
Source Footage:
Manufacturer: Panasonic
ModelName: AG-HVX200E
Type: P2 Movie
File Size: 4.0 GB
Image Size: 960 x 720
Pixel Depth: 0
Frame Rate: 25.00
Source Audio Format: 48000 Hz - 16 bit - Mono
Project Audio Format: 48000 Hz - 32 bit floating point - Mono
Total Duration: 01:12:08:14
Average Data Rate: 963 KB / second
Pixel Aspect Ratio: 1.3333
Sequence Settings:
Editing Mode: P2 720p 50Hz DVCPROHD
Timebase: 50.00 frames/second
Frame Size: 960x720 16:9
Pixel Aspect Ratio: 1.333
Fields: No Fields (Progressive Scan)
When I export the footage using upper lines (instead of progressive) they play back fine on my DVD player.
Any ideas to what could be causing the interlaced lines when exporting as progressive?
-Pete

OH...I just remembered something...
I have an old TV...which is 4:3. ntsc but dont matter I dont think re: this subject...
I made a DVD that was 16:9 and played it on my old dvd player ...and watched it on old tv. It CROPPED the 16:9 frame !
Playing on my computer it was fine...as I have a flat widescreen...
But I wanted to watch this video while sitting on my couch, on TV , as I was making final decisions about the edit and making notes (stopping , starting, etc )
My DVD player and tv combo does not have the option to go to a 16:9 format...so it was cropping the frame and was bad news.
To fix this I had to open a new project as 4:3 and put the 16:9 video into that project...and scale it to fit the 4:3...which gave it black bars on top and bottom....and exported mpeg 2 dvd...burned dvd etc.
NOW when I put it on my tv it was lettebox and I could see the whole frame etc...
So, in essence I forced it to be letterbox for an older dvd and tv...
If this is something you want to consider with your pal project it doesnt take long to make that happen...
playing the first export ( 16:9 ) on NEW tv ( widescreen ) ...was fine by the way...

Exported MPEG2 extremely interlaced! HELP!

Hello,
I need help with an exported MPEG 2, that after being exported looks really bad interlaced. What should I do to smoothen out those bad interlaced lines?
Thank you

What if the DVDs are intended for playback on either a TV or computer or computer/projector? E.g. I am making DVDs but have no control over how they are played. What is the best strategy?
Is there a way to embed an instruction to the computer playback software that this is an interlaced video and the software should deinterlace it? Or can the software be configured to be smart enough to detect the interlace?
Or should I make it progressive and will the hardware DVD player re-interlace it for the TV ok?
Or ???

Burned iDVD project has terrible interlacing

My son and I produced two QuickTime MOV files from the current Final Cut Express that look excellent on playback with no interlace artifacts. We subsequently put them into an iDVD project, with just those two MOV files and one image for the menu that uses the standard Revolution template. I created a disk image with the Professional quality output. I burned the image to DVD and the resulting movie segments show terrible interlacing artifacts when the movie pans.
These artifacts were not present in the source video or the produced MOV files. The MOV files were created first with no deinterlacing and then a second version of the MOV files used deinterlacing. The resulting DVD's produced identical interlacing artifacts.
What is the cause of the interlacing artifacts that iDVD introduced?
What can one do to eliminate these interlacing artifacts?
Do we need to use a third-party DVD authoring tool?
Thank you.

my penny is on - Ripped from a pre-existing DVD
To What ? .mp4 ?
I would choose StreamingDV .DV - best result in my exp.
Shot by a Prof. - May be as a pro on DVPro or 1080p60 or something that also
needs to be converted to what iDVD, Studio Pro or Toast™ can deal with.
Else - my list on DVD Quality
1. iDVD 08 & 09 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies up to 120 min.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
2.Video from
• FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09 this can also be set)
This can also be done with (Apple) Disk Util tool.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
*unclemano wrote*
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
Yours Bengt W

How do I make a number line in Numbers/Pages?

I need to know how to make a number line for my physics lab. Not a line graph, but an actual number line. Please help?

I would draw a line with arrows at each end, the place a table on top that has no fill and has the one vertical edge of pairs of cells set to solid, black.
Then place the table on top of the line

How can i make it auto line alignment in ScriptUI?

I want that form recognize new line character. (like '\n')
So I programmed like this. But it's not working.
var win =new Window ("dialog", "test");
win.orientation = "column";
var form1 = win.add ("edittext", undefined, "");
form1.onChanging = function(){
if(form1.text.search("\n") == true){
form2.active = true;
var form2 = win.add ("edittext", undefined, "");
var form3 = win.add ("edittext", undefined, "");
win.show();
How can i make it auto line alignment in ScriptUI?
Is it possible?

Your answer is not exactely I want.
But I got hint from your answer.
All I want is "How I can split multilined text into dozen edittext field?"
So I can make this from your sourcecode.
Your answer is so helpful.
Thank you.
var win = new Window ("dialog", "test");
win.orientation = "column";
var charLen=30;
var copytext = [];
var form0 = win.add ("edittext", [0, 0, 150, 200], "", {multiline:true});
form0.height = 100;
var form1 = win.add ("edittext", undefined, "",{readonly:true});
form1.characters = charLen;
var form2 = win.add ("edittext", undefined, "",{readonly:true});
form2.characters = charLen;
var form3 = win.add ("edittext", undefined, "",{readonly:true});
form3.characters = charLen;
form1.active = true;
form0.onChanging = function(){
form1.text = form0.text.split('\n')[0]
form2.text = form0.text.split('\n')[1]
form3.text = form0.text.split('\n')[2]
win.show();

Interlace lines on export, mixed media project (Canon XH A1and iPhone 4S)

I'm having a problem when exporting my project from Final Cut Pro X 10.0.7. I have shot at 50i on my Canon XH A1 and am also using iPhone 4S footage. It plays fine when editing but when I export using the .h264 codec I get horrible interlace lines across the footage which are really pronounced when there is any type of motion in the shot.
I've tried ticking the de-interlace box on the clip settings, changing the settings to progressive, changing the fields to upper or none and exporting the project again but I'm still getting these lines when playing the exported film in VLC player.
Please help!

Thanks Tom, I knew it must be something simple I was missing. Big help!

Is there any function make lwuit - List line wrapping?

Is there any function make lwuit - List line wrapping when the string is too long to display?
Please Help~
Thanks a lot.

did you check LWUIT [API documentation|https://lwuit.dev.java.net/nonav/javadocs/index.html] or their forum?

I can't change the brightness on my macbook pro. i tried the buttons on the keyboard, went to settings and tried to do it from there, didn't work. i have restarted my computer as well and that didn't make a difference. please help

i can't change the brightness on my macbook pro. i tried the buttons on the keyboard, went to settings and tried to do it from there, didn't work. i have restarted my computer as well and that didn't make a difference. please help.

Reset the PRAM and SMC.
Barry

How do I make a dotted line in Illustrator?

I've figured out how to make a dashed line (under Stroke), but how do I make a dotted line? Little round circles, one after the other that I can resize, turn into a circle, stick to a path?
Thanks

The string of pearls was done on CS2
The orange "pearls" had a stroke weight of 40 pt, Dash 0, Gap 42 and a new black stroke behind with a weight of 42 pt.
Then the stroke was copied, coloured just white and moved a bit to make the white "highlights". Weight 10 pt, Dash 0, Gap 42.
I suppose, if one could be bothered, it would be possible to make a string of pearls with alternating big and small pearls by using a combination of dash settings on New Strokes. Should work all right as long as the Dash is a constant or an exact multiple. I can't be bothered!
I don't understand that bit about having the last gap as 0. The pearls came out fine with just one setting for the dash and one for the gap. The other boxes weren't filled in.

How to make the diagonal line in the swing table cell?

Hi all,
How to make the diagonal line in the swing table cell just like the link below?
http://61.132.17.188/webber/table.gif

One improvement.. To get a line that is neat, use a bit of Graphics2D
    public void paintComponent(java.awt.Graphics g)
        int w = getSize().width;
        int h = getSize().height;
        // draw a line between (0,0) and (w,h)
        g.setColor(getForeground());
        if (strTop == null)
            strTop = " ";
        if (strBottom == null)
            strBottom = " ";
            java.awt.Graphics2D g2 = (java.awt.Graphics2D)g;
          g2.setRenderingHint(java.awt.RenderingHints.KEY_ANTIALIASING,java.awt.RenderingHints.VALUE_ANTIALIAS_ON);
          //g2.setStroke(new java.awt.BasicStroke(14.0f));
        g.drawLine(0, 0, w, h);
        //the following lines will draw the two strings,
        //one above the top of the line and the above below it.
        g2.drawString(strTop, (w/2)+2, (h/2)-2);
        g2.drawString(strBottom, 2, (h / 2) + 2);
        //the x,y for drawString are only based on assumption.   //do necessary changes to suit ur needs.
    }Then create a TableCellRenderer and set it to the Table Header for ur table's 1st row.....
Cheers

How to make custom append search help tab default for all users?

I've implemented my own search help append and I need to make the F4 search help to display my tab as default for all users. I know that search help stores the last tab used by the user in memory and when user uses the search help next time the last used tab is displayed but I have to make the system display the tab od my search help append always as default tab. Any idea how to do it?
Message was edited by:
        Marcin Milczynski

hi
<b>Enhancement using Append structures</b>
    Append structures allow you to attach fields to a table without actually having to modify the table itself. You can use the fields in append structures in ABAP programs just as you would any other field in the table.
Click on the append structure tab and opt to create new
structure.
Append structures allow you to enhance tables by adding fields to them that are not part of the standard. With append structures; customers can add their own fields to any table or structure they want.
Append structures are created for use with a specific table. However, a table can have multiple append structures assigned to it
    Customers can add their own fields to any table or structure they want.
The customer creates append structures in the customer namespace. The append structure is thus protected against overwriting during an upgrade. The fields in the append structure should also reside in the customer namespace, that is the field names should begin with ZZ or YY. This prevents name conflicts with fields inserted in the table by SAP

I have purchased a TV show series. I show that from the purchased screen it has downloaded. However it is not in my library. How do I watch this episode? Several of the episodes are in the library but a few did not make it there. Help please!

I have purchased a TV show series. I show that from the purchased screen it has downloaded. However it is not in my library. How do I watch this episode? Several of the episodes are in the library but a few did not make it there. Help please!

Sometimes things have inconsistent labeling. Check your Recently Added playlist.

HT5554 Yesterday, I could make calls on my new iPhone5. Today, it says "No SIM Card Installed." Now I can't make calls. Any help?

Yesterday, I could make calls on my new iPhone5. Today, it says "No SIM Card Installed." Now I can't make calls. Any help?

Same exact thing happened to me, I restarted my
Phone and it didn't work, I took my girlfriends earing and took out the SIM card slot and put it back in, and wham it worked. Hope this helps

Compressor makes terrible interlace-lines !!!! Help !!!!

Similar Messages

Maybe you are looking for