Compressor making MPEG/AC3 files of different lenghts when running 8 cores
Hey guys, first off I am running Compressor 3.0.2 on a MacPro 2.8 GHz 8 core machine. My problem is that my files come out to a different lenght when I use my qmaster cluster to access all 8 cores while encoding mov's to MPEG2 & AC3. The difference between MPEG and AC3's are normally between 3 and 12 frames.
What I have found is that if I use "My computer" instead of the cluster that files are exactly the same. It makes me think there is an error in the joining of the files at the end. Using my computer right now is an okay solution, but I rather use all 8 processors as it cuts compressing in half.
Matthew
hi matthew,
seems a lot of people are having similar problems with compressor 3.02 (see the thread i started a couple days ago..) for me it's sending uncompressed mov's to compressor that are 23.98 fps. what is the framerate of your movies?
karl
Similar Messages
-
Making MPEG 4 files from FCPX 10.1
I miss the quicktime conversion option in FCP 10.1 that I had on my FCP6 to create MPEG 4 files. It seems that I have to either route my finished .mov through Compressor or Aimersoft, or other like programs. Is that correct? If so, any recommendations on free apps to do the same conversion?
RicardoMontalbon wrote:
… If so, any recommendations on free apps to do the same conversion?
goo' ol' Mpeg Streamclip
open your h264-export from FCPX with it
go straight to 'Save as'
select from drop-down 'mp4'
=> this will just re-wrap the file - done in seconds! -
Hi
Creating an application to analyze .dmp files - all working well except this odd issue
If I open command prompt and enter this command:-
kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v"
Then it works and shows me all the output I need (shown at bottom of post)
If I run same command in VB.net using following code - then it doesn't give the same output - the bits I need at the end created by the !analyze -v switch don't appear
Any ideas why it is not seeing the switch correctly - setting a breakpoint and checking contents of startinfo seems to be showing correct cmd line i.e. "kd -z C:\windows\minidump\042414-24632-01.dmp -c "!analyze –v;q""
Dim myprocess As New Process()
myprocess.StartInfo.FileName = "C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"
myprocess.StartInfo.Arguments = "-z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
myprocess.StartInfo.UseShellExecute = False
myprocess.StartInfo.RedirectStandardOutput = True
myprocess.StartInfo.CreateNoWindow = True
myprocess.Start()
TextBox1.AppendText(myprocess.StandardOutput.ReadToEnd())
Output when run from cmd prompt:-
C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86>kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v;q"
Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
Executable search path is:
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
Machine Name:
Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
System Uptime: 0 days 0:00:38.703
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
************* Symbol Loading Error Summary **************
Module name Error
ntkrnlpa The system cannot find the file specified
You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 50, {afa99150, 0, 88c557d7, 0}
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
*** WARNING: Unable to verify timestamp for HipShieldK.sys
*** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
Probably caused by : mfehidk.sys ( mfehidk+377d7 )
Followup: MachineOwner
1: kd> kd: Reading initial command '!analyze -v;q'
* Bugcheck Analysis *
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: afa99150, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 88c557d7, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000000, (reserved)
Debugging Details:
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
ADDITIONAL_DEBUG_TEXT:
You can run '.symfix; .reload' to try to fix the symbol path and load symbols.
MODULE_NAME: mfehidk
FAULTING_MODULE: 82e3e000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4d2e1e3e
READ_ADDRESS: GetPointerFromAddress: unable to read from 00000000
GetPointerFromAddress: unable to read from 00000000
unable to get nt!MmSpecialPoolStart
unable to get nt!MmSpecialPoolEnd
unable to get nt!MmPagedPoolEnd
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
afa99150
FAULTING_IP:
mfehidk+377d7
88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) x86fre
LAST_CONTROL_TRANSFER: from 82e7eaa8 to 82ecb879
STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
ad0baf90 82e7eaa8 00000000 afa99150 00000000 nt+0x8d879
ad0bafa8 88c557d7 badb0d00 00000000 88c4ceb0 nt+0x40aa8
ad0bb040 88c4f97d 001a99b0 afa91000 00000000 mfehidk+0x377d7
ad0bb090 88c52b16 00770220 ad0bb0fc 00000010 mfehidk+0x3197d
ad0bb0bc 98d5fb73 ae770220 ad0bb0fc 00000010 mfehidk+0x34b16
ad0bb140 98d5fc43 ae738c30 98d6b62a aace7220 HipShieldK+0xb73
ad0bb168 98d6b882 ad0bb19c 00000000 98d77b44 HipShieldK+0xc43
ad0bb1b8 98d631a9 00000bd4 0000102c ad0bb208 HipShieldK+0xc882
ad0bb330 88c47795 00000bd4 0000102c ad0bb401 HipShieldK+0x41a9
ad0bb400 88c22b57 0000102c ad0bb460 85b3dee0 mfehidk+0x29795
ad0bb41c 88c232c6 ad0bb430 0000000c 8c4b6ce0 mfehidk+0x4b57
ad0bb43c 830a5acb adb6b9b8 0000102c ad0bb460 mfehidk+0x52c6
ad0bb4f4 830adaf8 adb16030 01b6b9b8 ad0bb550 nt+0x267acb
ad0bbc00 82e7b8c6 038ae710 038ae6ec 02000000 nt+0x26faf8
ad0bbc34 77a470f4 badb0d00 038ae3dc 00000000 nt+0x3d8c6
ad0bbc38 badb0d00 038ae3dc 00000000 00000000 0x77a470f4
ad0bbc3c 038ae3dc 00000000 00000000 00000000 0xbadb0d00
ad0bbc40 00000000 00000000 00000000 00000000 0x38ae3dc
STACK_COMMAND: kb
FOLLOWUP_IP:
mfehidk+377d7
88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: mfehidk+377d7
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: mfehidk.sys
BUCKET_ID: WRONG_SYMBOLS
FAILURE_BUCKET_ID: WRONG_SYMBOLS
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:wrong_symbols
FAILURE_ID_HASH: {70b057e8-2462-896f-28e7-ac72d4d365f8}
Followup: MachineOwner
quit:
output when run in my app:-
Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
Executable search path is:
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
Machine Name:
Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
System Uptime: 0 days 0:00:38.703
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
************* Symbol Loading Error Summary **************
Module name Error
ntkrnlpa The system cannot find the file specified
You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 50, {afa99150, 0, 88c557d7, 0}
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
*** WARNING: Unable to verify timestamp for HipShieldK.sys
*** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
Probably caused by : mfehidk.sys ( mfehidk+377d7 )
Followup: MachineOwner
Darren RoseTry it by opening the Cmd prompt as the actual process and passing the Filename and its arguments as the arguments of the Cmd process. If you notice there is a "-C" before the Filename and Arguments in this example. The "-C"
tells the cmd to execute the commands and then close itself. You can also use a "-K" which tells the cmd to execute the commands and keep itself open. Being you are not showing the cmd window you don`t want to keep it opened because the
user can`t close it so, that is why i used "-C".
I don`t have the program so, you can just experiment to see what it does. Maybe you should try using "-K" and show the cmd window by commenting out the CreateNoWindow line so you can see what is in the cmd window while testing.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim filepath As String = """C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"""
Dim args As String = " -z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
Dim p As New Process
With p.StartInfo
.FileName = "cmd.exe"
.Arguments = "-c " & filepath & args
.UseShellExecute = False
.CreateNoWindow = True
.RedirectStandardOutput = True
End With
p.Start()
TextBox1.Text = p.StandardOutput.ReadToEnd
End Sub
If you say it can`t be done then i`ll try it -
Why Do I get different result when Run as Admin to Standard?
Why when Running this script to copy from the "config64" folder (if files exist)(if not copy from "config32") if works correctly when running Batch file normally (copies the config64), but using the exact same line when running
the Batch file as "Run as Administrator" it doesn't work correctly (copies the config32, even though Files do exist config64 folder as they did when I ran it normally and it worked)
>nul 2>nul dir /a-d "Folder\config64\*" /s && (XCOPY "%~dp0Folder\config64\File64.ini" "%ProgramFiles(x86)%\CompanyFolder\ProductFolder\" /y /d) || (XCOPY "%~dp0Folder\config32\File32.ini" "%ProgramFiles(x86)%\CompanyFolder\ProductFolder\" /y /d)
UAC is turned off and I'm the administrator (only user on a standalone PC) running windows 8.1.
Is there a reason or it is a strange bug with Windows 8.1?A LOT more intellectual than
Frederik Long Who just had no clue himself to not offer an answer. As I've only been looking at this for 2 weeks I think I've come far and you help is much appreciated. Thank you JRV!
You seem to miss the point. Assuming that your problem is caused by a bug can prevent you from finding the real cause. If you had dismissed the bug theory then you might have done some real debugging, e.g. by breaking up your single-line script (which is
hard to comprehend) into easily digestible pieces and adding some debugging code like so:
@echo off
set Target="%ProgramFiles(x86)%\ComapanyFolder\ProductFolder\"
dir /a-d "Folder\config64\*" /s 1>c:\Test.log 2>&1
if %ErrorLevel% EQU 0 (
XCOPY "%~dp0Folder\config64\File64.ini" %Target% /y /d /s 1>>c:\Test.log 2>>&1
) else (
XCOPY "%~dp0Folder\config32\File32.ini" %Target% /y /d /s 1>>c:\Test.log 2>>&1
The log file would have told you quickly what is going on. Furthermore - why should I offer my own solution to your problem when JRV gave you a perfect answer straight away? -
Downloading the file in our PC , when running the job in Background
Hi,
We have an enquiry for below requirment.
Our client runs some jobs in front end , but as the time taken to execute the JOB is more than 15 minutes , he is getting timeout problem, so we want to run the same program in background.
Generally the output of the report is to download the file into his desktop, so even when he is running
the same job in background he want it to be downloaded into his PC, instead of application servor.
We created a test program similar to the requirment, and ran the job in foreground and the file could easily be downloaded to desktop. Then we ran the program in backgound - The job failed with an error message Codepage could not be determined - Message no. FES025.
My Question is - is it possible to download the file into the desktop while running in background.
Please help me .
Thanks in advance.
Vengal Rao.Please search the forum. This question has been asked and answered many times before.
Rob -
Get Generic File I/O Error when running DAQ Reference Design
I Get a Generic File I/O Error when trying to Save Data to Disk in Data Acquisition Reference Design.lvproj from daq_ref_app_v10.zip in LabVIEW 9, If I configure to simulate one channel, start the acquisition, stop the acquisition and then save the data to disk, I get the generic file I/O and:
Error 6 occurred at TDMS Open in Data Acquisition Reference Design.lvlib:Logging [TDMS].lvlib:TDMS Data Logging.vi->Data Acquisition Reference Design.lvlib:Main.vi
Shouldn't this work without error?
Should NI distribute Reference Desgins that work without errors?
What is the problem with this application?This error usually occurs because of malformed file paths. Put an indicator on the path before the TDMS Open so you can see the path explicitely. Make sure you have full permissions for the directory in which you will be saving and make sure that the path isn't greater than 255 characters.
Have a great day!
Tanya V
National Instruments
LabVIEW Platform Product Support Engineer -
Convert MPEG 4 file into different format
I have a TrekStore Movie Station which only supports formats like DVD (IFO,VOB), VCD (MPGEG1), SVDC/KVCD (MPEG2), DivX 3, DivX5, XviD. In Quick Time Pro Help it says I can convert an save movies into different formats, I just can't find how I can do it.
I have a TrekStore Movie Station which only supports formats like DVD (IFO,VOB), VCD (MPGEG1), SVDC/KVCD (MPEG2), DivX 3, DivX5, XviD. In Quick Time Pro Help it says I can convert an save movies into different formats, I just can't find how I can do it.
QT Pro does not "do" multiplexed compression formats. For that you would need an external, third-party, MPEG-based application. iDVD, Toast, Visual Hub, iVCD, MPEG2 Works, etc. would work here to create some of these formats. QT Pro, MPEG Streamclip, and GarageBand can all create DivX and/or XviD files if you have the appropriate QT components installed. (Not sure if you can still find DivX 3 but assume free download of DivX 5.1.1, 5.2.1, and/or Xvid are still readily available on the internet.) -
Video and Audio Files are different lengths when exporting
I'm just trying to get comforatable with a much faster Windows workstation on PPro and AE.
I just exported my first project from PPro to burn to Blu-ray like I've done dozens of times on our older Mac Pro w/o problems.
My Ppro file is 7:04:18 in length. I export the video as an mp2 Blu-ray video and import it into Encore and it shows up at that same length.
I export the audio as an aif and import it into Encore and it shows up as 7:06:19 in length--2 seconds and 1 frame longer.
Everything is CS6. File is 1920 x 1080, sq pixels, 29.97.
Any suggestions as to why this is happening?Thanks for the feedback. I exported to aif as I was going to burn the Blu-ray on our Mac Pro in Encore, since we don't yet have a Blu-ray burner installed in our new Windows workstation.
Upon seeing your note, I re-exported the project as you described and placed the wav and mp2 in Windows Encore and they are both the same time length.
It seems the aif should be the same too... but I assume wav is likely the preferred format on Windows so will be using that as the new workflow.
Thanks for your help! -
Finding files on different drives when the drive names were changed
So I had music located on two different external HD's, and when I plugged in my iPod, it changed the names of my drives. For example, I had music on drive "H" and drive "I", then when I plugged in my iPod it changed those drive names to "J" and "K". It is easy to change my folder location in iTunes, but that will only fix half of my music (I have over 45,000 songs in my library). How can I have iTunes find all those other songs that now have the exclamation point as the songs are spread out now throughout my iTunes library.
I can not go along to each song or album and go through the process to find the location, that will take me FOREVER.
Thanks for your helpConnect the external drives & the iPod. Close iTunes. Open Control Panel > Administrative Tools > Computer Management > Disk Management. Reassign the drive letters used by each device until they match your original set-up. Start iTunes and, if you've got it right, all your tracks will be acessible.
tt2 -
Making the data file visible as the vi runs and writes to it
This is a rather simple question but I want to make sure I that I know how to do it and do it right. I am writing to a text file and would like to make it visible as the vi runs and updates it. Thanks.
If you are using this for the purpose of de-bugging your program, I like the idea Tomoya wrote about using a probe to see what is going to the text file. It's very simple.
If you are trying to do this at runtime, I would handle it this way : In a loop seperate from the one that does the writing, use a file properties vi to get file size and compare it to the last file size query (use a shift register for this). If the file size has changed, re-read and display the contents of the file to a front panel text box. Otherwise do nothing.
For a more programatically correct method, use a semaphore or queue to tell the update loop that its time to re-read. The writing loop would (after write) set the queue element (or semaphore). The reading loop would wait on this trigg
er to know when to read.
Jared -
"create pdf compatible file" gets tuned off when running batch
I created an action that resizes an image and the saves it in the same format (AI) and then close the file. Next I open the AI formatted file I just created in PhotoShop it opens and looks great. So I go back to Illustrator and run the same action in a batch where I open a folder containing AI files run the action and save the files in a different folder. Now I try to open the files in PhotoShop and find out that the batch function some how turned off create pdf compatible file option when it got to save as in the action so now Im unable to open the file in PhotoShop. Im new to illustrator Im using cs4. Thank you for reading do you have any ideas?
Thanks to all, I really appreciate all the pains which all of you have taken in resolving my problem.
It wasn't Java problem, rather batch file problem. I was only changing the directory, and was not providing for the exe file to run.
@echo off
cd "C:\JBoss\jboss-4.0.5.GA\bin\Fastran"
"C:\JBoss\jboss-4.0.5.GA\bin\Fastran\FASTRAN.EXE"
ren FTN04 FTN04i
EXIT
:finishNow it is working fine.
I did check the access permissions, no problem with that I guess. The problem was with the path. The batch file couldnt go pass bin directory, and I noticed that only today ;(. At any rate, I changed that and now it is all smooth and dandy.
Once again, thanks a lot. -
End of File reached error message when running report
I am running this report in two different places. On my own machine it seems to run fine however when I run it for a client on their server I get a message saying end of file reached and the report won't come up. Any suggestions?
Hi Jeff,
In what context are you running the report? Are you talking about refreshing the data?
Is this in crystalreports.com or the CR designer or some custom built application?
This forum is specifically for the crystalreports.com, Information OnDemand, and Applications OnDemand web applications so this might be the wrong place for your question. You might want to try the Crystal Reports Design or one of the Crystal Reports SDK forums instead.
Cheers,
Steve -
Different behavior when running in Eclipse and on Tomcat
I am having a problem because the program that I wrote, tested, and work fine on Eclipse doesn't have the same behavior when I convert it to a Web Service and called by a client.
I have not this strange behavior. See this code:
NamedNodeMap attrs = node.getAttributes();
System.out.println(attrs.getNamedItem("performance"));When I run it on exist I got something like this:
org.apache.crimson.tree.AttributeNode1@11bed71which should be correct since attrs.getNamedItem() return a Node.
But! When I run it as a web service on Axis hosted on Tomcat I got
performance="3758.0"???!!!
Also, when I do something like
System.out.println(node)In Eclipse I got the whole XML file like this:
<root><sequence name="main" performance="3591.5" cost="63.5" reliability="4144965.2" availability="0.9863115" integrity="1.0" security="128.0">
<switch name="switch-1" performance="3591.5" cost="63.5" reliability="4144965.2" availability="0.9863115" integrity="1.0" security="128.0">
<case condition="bpws:getVariableData('i') = 0" performance="3425.0" cost="77.0" reliability="1.0" availability="1.0" integrity="1.0" security="128.0">
<invoke name="invoke-2" partnerLink="HotelBooking" portType="nsxml2:HotelBooking" operation="searchHotel" inputVariable="searchHotelParam" outputVariable="searchHotelResult" serviceKey="95EDCDE0-46F6-11DA-BEB0-90CACF0DCD6A" />
</case>
<otherwise performance="3758.0" cost="50.0" reliability="8289929.5" availability="0.972623" integrity="1.0" security="128.0">
<while name="while-1" condition="bpws:getVariableData('i') > 0" performance="3758.0" cost="50.0" reliability="8289929.5" availability="0.972623" integrity="1.0" security="128.0">
<sequence performance="3758.0" cost="50.0" reliability="8289929.5" availability="0.972623" integrity="1.0" security="128.0">
<invoke name="invoke-1" partnerLink="FlightBooking" portType="nsxml0:FlightBooking" operation="searchFlight" inputVariable="searchFlightParam" outputVariable="searchFlightResult" serviceKey="AD5A1880-46EC-11DA-B399-97115D85E15E" />
</sequence>
</while>
</otherwise>
</switch>
</sequence></root>but on Axis I got:
[root: null]I'm confused. I think it might be because of the different version of the library between eclipse environment and axis environment. But the problem is, I can't figure out what JAR should I change. Can you give me a clue??DOM doesn't specify what the toString() method of Node etc. should return. So each implementation of DOM chooses something that seems reasonable to the implementers. If this isn't suitable for you then don't use the toString() method. (That's what System.out.println calls when you pass it an Object, in case you didn't know.)
-
"file corrupt" error message when running full installer - normal installer won't work either.
I was having serious problems displaying images/video, so uninstalled so I could reinstall. Big mistake - ever since I've done this, FF absolutely won't install. The normal install .EXE(I'm using Windows 7) always gets to about a millimeter to the left in the status bar of where it crosses from "downloading" to "installing." I then tried the full installer in all 3 versions of English, all of which simply pop up a window saying "file is corrupt" with no explanation or options. Please help. I work from home and absolutely have to use FF as my browser for my job, and I'm missing an entire shift today because of it. Thanks!
You're welcome
-
"File download - security warning" when running a report
Hi all,
Few of our users are having an error on their PCs when trying to run a report in Internet Explorer 8 with Adobe Reader 10.1.3 installed on their PCs. The error is:
"File Download - Security Warning"
Do you want to save this file, or find a program online to open it?
Name: rwservlet
Type: Unknown File Type
Find Save Cancel
Other users are able to run the reports. They have IE8 and Adobe Reader 10.1.2 installed. Any ideas why this problem might occur?
Any help is appreciated.Hi,
what is the behavior if you leave adobe Reader opened and running before running the report?
Thanks, Roberto
Maybe you are looking for
-
Hi guys, Not sure if it's something I've done or if it would sort itself out if I restarted AI but I thought I'd drop a quick message in here just in case. When I try 'placing' an image into a AI document, it appears to be embedding the file [be it a
-
HDMI Adapter no longer charges new iPad ?
I bought a shiny new iPad 3rd Gen, and am having difficulties with my existing Apple HDMI Adapter, which, apart from the "This accessory is not supported" popup, will not charge the device even when being plugged to an iPad Power Adapter. Have any of
-
Any control of iPad system prefs in Lion Server or Configurator
I've been working with Configurator to set up some test iPads to be used in a library environment, and haven't seen any place where I can disable system sounds, keyboard clicks etc - does anyone know if this is possible under Configurator or Lion Ser
-
Rounded Out the Comenity Lineup....
Well, I figured since Comenity was so willing to help me on my credit rebuilding journey, I'd try to round out the lineup yesterday. Landed the following: Orbitz VISA $7000FRN MC $5000Virgin America VISA $3500 All were done with the pop up and all au
-
SCSM 2012 R2 AD connector sync issue
Hi Guys, I have a very strange issue with the AD connector and have been struggling with it for a couple of days now. Frankly I’m out of options and hope some here can help me out. Let me start by telling you briefly how our environment is setup. Do