Compressor not installing

Hello,
I'm italian and I don't speak English.
I have a problem with Compressor and QMaster. I have installing FCP Studio 1.5 and I update all software, but Compressor 2 and QMaster 2 they not update. I download Compressor 2.0.1 and Qmaster 2.0.1 from Apple site's, but not installing. The installing process is run, but when reboot the machine Compressor and QMaster are not at 2.0.1 version. ??!!??!
I have a new MacPro 8-core with Leopard 10.5.1 .... this a great problem for my job.
Thanks for your help.
Bye
s.

Hello,
I ran into the same bloody problem. Repeated attempts at installs - every time I find I am still at 2.0, not 2.0.1.
The installer is failing. If you notice, partway thru the install (as the system is restarting), the message suggests the first item is installing and then - it disappears. A problem with Leopard is this information is not made available to you - it just disappears as the restart begins.
The solution for me was to give up on Software Update entirely - go to Apple's download page, search for compressor and qmaster, and download the 2.0.1 updates yourself, and run them. For me, that update worked -- finally, after many tries of the other (including system reinstalls and FCS installs).
http://www.apple.com/support/downloads/
That said, compressor still fails for me, and I am close to giving up on Leopard for good and reinstalling Tiger, if I can't get Final Cut Studio to work soon. I have spent many, many days, disk erase/complete reinstalls and think I have better things to do with my time..
Good luck,
Brian

Similar Messages

COMPRESSOR NOT INSTALL

HI,
I HAVE THE FINALCUT STUDIO 2, FINAL CUT 6.0.2. BUT REINSTALL THE FINAL CUT UP BY 6, BUT THE COMPRESSOR STOPPED FOR WORK. AND I CAN NOT INSTALLING COMPRESSOR. WHAT CAN BE?

You might try posting in the compressor forum.

Compressor/decompressor codec not installed

I'm trying to upload from dvd video, I'm getting error message " compressor/decompressor codec not installed. I'm using premier 11. Need help. Thanks.
nelacs

nelacs
What computer operating system is your Premiere Elements 11 running on?
If you are trying to rip VOB (video files) from the DVD-VIDEO format on a DVD disc, you do not need to convert them into any other format.
You simply insert the DVD disc in the DVD burner tray.
Manually set the project preset to DV Standard or DVD Standard Widescreen, depending on how the DVD-VIDEO on DVD disc was produced.
http://atr935.blogspot.com/2013/04/pe11-accuracy-of-automatic-project.html
Detail for manual setting of project preset is described in that blog post.
Then you use Add Media/"DVD Camera or Computer Drive"/Video Importer to bring your video files (VOBs with a file name such as VTS_01_1.VOB and so on into the project and Timeline.
Are you doing all that? Please clarify. We can supply more details as indicated.
Thank you.
ATR

H.264 out of Compressor fails: 'Codec Not Installed'

Been having a lot of trouble getting Compressor (v2.0.1) to output H.264 files all of a sudden. I setup a batch, the first one will compressed fine, then the next 4 went about halfway through and then failed with an error message 'codec not installed'.
I then tried to do one file at a time, tried rebooting, tried a file systems check, tried trashing the compressor.plist preferences, all to no avail. H.264 is no longer working.
The one movie that I successfully encoded plays fine, as have all the other movies I've done with H.264 over the months...
Any ideas what I need to do to fix this?

Export using quicktime conversion.
jw

Compressor codec not installed

I have tried to use compressor to make an m2v file for DVD studio pro 4 using the generic m2v codec provided by DVD stuio Pro4.. When I submit the file, compressor tells me that the action failed because the codec is not installed. What does that mean. I have installed all the components from the disc to my hard drive. I have used other codecs and the audio files work but not the video.

What is the codec for your footage you are trying to encode to m2v?
It it isn't a .mov file, that is probably your problem.

Compressor not properly installed

Compressor not properly installed... did I need to buy this seperately? whats going on?
are there other programs i can use to compress my videos for internet, because FCP compressing *****

haha not the version i downloaded
just kidding... dont sue me apple
i will reinstall my RETAIL installation

Hi I have downloaded compressor4 from Apps store but it won't open - says compressor not properly installed. The reason for my purchase was that compressor 3 stopped working. I tried to reinstall from the FCP disk but it was 'greyed out'.

Hi I have downloaded compressor4 from Apps store but it won't open - says compressor not properly installed. The reason for my purchase was that compressor 3 stopped working. I tried to reinstall from the FCP disk but it was 'greyed out'. I followed suggestions from the apple site to clear various library files - mainly relating to Qmaster but this didn't make any difference, an iwonder igf perhaps this is the reason for the compressor 4 programme not working. Thanks
Tom

You need to export a self-contained video from FCP 6. Import the self-contain video into Compressor 4.
•iMac 27", 3.4GHz Quad-Core Intel Core i7, 16GB 1333MHz DDR3, 2TB HD + 256GB SSD, AMD Radeon HD 6970M 2GB GDDR5•FCS 3•Compressor 4•OS X 10.7 (Lion)•iPad 1&2•Apple Tv 2•

Camera Raw will not install on my mac,os 10.7.5. When I click on the install package the main install screen opens and that is as far as I can proceed with the down load. I have to force quit the software and try again. I have deleted and downloaded the s

Camera Raw will not install on my mac,os 10.7.5. When I click on the install package the main install screen opens and that is as far as I can proceed with the down load. I have to force quit the software and try again. I have deleted and downloaded the software several times to no avail. I need some help.

Appreciate your help Ian and others. I have since uninstalled FCS and reinstalled FCXP only to get the same thing. Loading FCXP stalls at "Looking for Compressor Support". When I first downloaded FCXP from the App store I didn't notice that FCS was being placed in it's own folder. It's not something I did manually. Although moved into it's own folder with FCXP on the same drive. I was not able to open FCS apps. They would load and then "quit unexpectantly". They opened just fine before I downloaded FCXP. Do I need to purchase Compressor so that FCXP recognizes it? It seems this is where it stalls. It doesn't explain however why my computer "FREEZES" while doing this. I am in the process of re-installing Lion to see if this helps, otherwise I am at a complete loss.

Fails with codec not installed error

Hello all of a sudden Compressor fails to produce ProRes 422 encodes with the error (in the log) "*Processing service request error: Codec not installed*". It is installed as I can use and have used ProRes elsewhere. Running Compressor 3.0.5.

I've tried the trashing of user prefs and Qmaster cache as mentioned here http://support.apple.com/kb/TS1888 as well as running the utility Compressor Repair http://www.digitalrebellion.com/compressor_repair.htm. Also, after testing I see that Compressor is actually having troubles reading 1 particular ProRes file and re-encoding it as ProRes. (I'm running a multi-step conversion using ProRes for all intermediary steps). I don't see anything wrong with this file (plays in QT, displays in the Compressor Preview window, etc.), but I'll remake it and see how Compressor does.

Codec not installed

When I try to send FCP project to compressor or if I try to upload directory to YouTube I get an error message Codec not installed. This is probably related to the fact that I used MacKeeper recently. Does anyone know how I reinstall the required Codec(s)?
Thanks

I wish I could. My friend installed FCP on my macbook and now he's back home (several hours away from me).

MPEG 2 component not installed in Quicktime Pro

My first symptom is: I try to extract a file from a DVD using MPEG Streamclip, and I get a message that says MPEG 2 is not installed in my computer.
But I have Quicktime Pro, Final Cut Pro and Compressor installed in my computer. I have checked the Quicktime folder in the library and the component is there. But when I try to export a file as a MPEG 2 movie either from inside Final Cut using the Quicktime Conversion option or from Quicktime itself, I do not see the MPEG 2 option! Why is this???
Help please!
PS: My DVDs are not protected, they are of my own work!

What I really wanted to do was: import my own videos from DVDs I made, add them to a DVD Sudio Pro project of my work (my digital portfolio) and then burn this project back to DVD - encoding them back to DVD. It was my understanding that in order to work with them in DVD SP, they had to be either .mov or mpeg2.
DVDSP normally expects a conversion compatible QT compression format or MPEG-2 "elementary stream" (i.e. M2V video file referencing a separate AIFF audio file or paired M2V and AC3) files.
Any idea how to fix this?
You may have run up against an upgrade incompatibility. I used to use FCP v4.5 with the then contemporary versions of Compressor and DVDSP. As soon as i upgraded to leopard, my MPEG-2 encoder, Compressor, and DVDSP either failed to work at all or only partially functioned. As I always keep an earlier OS handy on one or more hard drives, I quickly learned these applications still worked when I booted up using Tiger. For several months I continued to work by reverting to Tiger when needing to use the affected applications. In April, I finally "bit the bullet" and purchased a used copy of FCS2 over the Internet. Now everything (except my old MPEG-2 encoder component) works under Leopard. Not sure if this may be the basis for your problems but if you can boot up in Tiger and re-initialize the problem applications, then you can easily test whether or not an OS incompatibility is the root of your problems here.

Compressor not opening at all..not even a sign...

guys,
my compressor not working...well, its been long time installed on comp just that this the first time i open it..its not working...after i click it..nothing showup...wats wrong?

I'd recommend an uninstall/reinstall of Compressor & QMaster. Instructions are here:
http://www.digitalrebellion.com/blog/posts/howto_reinstall_compressor_andqmaster.html

Compressor not opening / new version not functioning

Hi folks- This is a stumper for any of you non-Intel chip users.
Short version: A new version of Compressor was installed on my G4 recently , which doesn't function properly. I tried uninstalling it, and reinstalling an older version, but the older version doesn't open.
Long version: I'm a professional videographer, and use FCP (Studio 1, 5.1) on a regular basis, frequently using DVD Studio Pro (4) for authoring DVDs, thus using Compressor (my last version was 2.3) as an intermediary.
For an unrelated project, I recently purchased Logic (8.0.2), which during installation also upgraded a few other Apple softwares in the process, including an upgrade to Compressor 3.0.3.
Unbeknownst to me, the Compressor 3.0.3 doesn't work on my machine properly, I'm guessing because it's an older machine. I opened up Compressor today for some routine work, to discover a warning that said:"The installed graphics card does not support the OpenGL features recommended by Compressor."
This warning still allowed me to open the program, but when I loaded up several files for compression, it gave me a warning, saying "Each target assigned to a job must have a setting and destination" EVEN THOUGH every item did indeed have both a destination and two settings. Hmmm...
So, I figured that since Compressor 3.0.3 wouldn't work correctly, I would uninstall it, and reinstall my older version off the FCP Studio disc. But when I did this, version 2.1 would NOT open at all on the machine. I could click the application all day long, but it won't open. Hmmm. I tried upgrading 2.1 to 2.3 through Apple's Software update, but the 2.3 upgraded to the 3.0 again. Arghh!
I'm either left with an un-openable 2.1 or a non-functioning 3.0. Any suggestions, recommendations?
-Chris

Hi Alberto-
Thanks for the reply, and the help. I was indeed dragging my settings onto the job itself (rather than the empty window), so I knew that wasn't the problem per se. But I'm so glad that you had within your previous post the URL to the Compressor Tutorial. Because at the very bottom of the tutorial page, I found exactly the problem I was having.
It's some strange quirk with Compressor 3--sometimes when you drag your settings onto the job, it still leaves the first line as a destination with no setting. That's what my machine was doing. It's an odd bug they should work out--and you can see what was happening on the bottom of the tutorial page you sent me.
Even so, I wasn't aware of this last night, so I had found an older support page about how to uninstall Compressor 3 (deleting files from the library folders & such--frameworks, receipts, et all), so I went ahead and did that, then reinstalled my Compressor 2.3 from scratch, and things worked well after that.
For the time being, then, I'm back to Compressor 2, but now I know that when I reinstall Compressor 3, I have to look out for that problem, and I'll know how to work around that odd quirk.
Thanks so much for your help, Alberto!!!
-Chris

Ipod 5th Generation 80 GB / Device Manager / Driver not Installed / Code 28

Well, where do I begin! Got my 1st Ipod 2 days ago & still unable to use it! I have installed & uninstalled the itunes 7 software numerous times. On phone w/ Apple for 1 hour...followed by online chat help w/ Dell.
I've tryed 4 different USB ports on my computer. The device Manager shows the Ipod w/ a ? and a ! in yellow. The add new hardware tells me, "Drivers for this device are not installed. Code 28." My computer reconizes that the ipod is plugged in, but will not do anything. There is no communication between the 2. Keeps telling me to insert cd for software for ipod.
Help! Does seem that other people are having similar issues. I think a software cd should of been provided w/ the ipod....not sure if that would of corrected my problem.

Hi,
Click Start > All Programs > Accessories > Run. the Run dialog appears,
Type %temp%, then click OK.
locate and enter into the HP Installation temporary folder, start with the 7Z characters.
If you can see several folders starting with 7Z, locate the latest one.
Click the Address bar area, then the full address path will appear,
Copy the full path location by clicking CTRL + P while the path is selected.
Enter the Device Manager.
Right click the printer name with the error mark, then click Update Driver.
Select the second option to manually locate the driver.
Paste the temporary folder path and click Next (Keep Include Sub Fulders marked), the driver should be updated.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp officejet 6100 eprinter will not install on windows 7 64bit

I've tried everything. Cannot install software for brand new hp officejet 6100 eprinter. No using disc, not wireless, not usb, not downloading software not troubleshooting in windows nothing what so ever. It's been weeks and weeks, just can not use this printer in anyway on HP Pavilion dv7-3060us Entertainment Notebook PC
Serial Number: [edited by Moderator]
Product Number: VM237UA
Can't attach screen print of error messages here.
install does not finish: A fatal error occurred preventing product use. Click "Cancel" to cancel install.
MSIExec command: /i "C:"\HP_ePrint\Setup\Core\SIPM_64\HpTcpMon65.msi"/qn REBOOT=ReallySuppress
Path: <empty>
Return code: 1603
Troubleshooting HP printer software installation
We are sorry that our printer software encountered an error while installing.
Your printer software did not install successfully. You may have seen an error similar to one of the following:
"Device setup failed to complete"
"Unknown device"
A red X displays after connecting the USB cable
On the following screens, you will find troubleshooting solutions that our support agents have found to be the most helpful to resolve install errors. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. Also, this troubleshooter includes buttons to make certain steps easier. If a button doesn't work or you would like to do the steps yourself, you can view the manual steps by expanding the hidden text below any button.
To begin troubleshooting, click Begin USB Troubleshooting, below.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software
This solution consists of multiple steps. Make sure you complete each step before continuing to the next one.
Uninstall the HP software
Even if the HP software installation failed, some components might have partially installed on your computer. Follow these steps to remove them.
Disconnect the USB cable from both your printer and computer (if it is currently connected).
Click here to open the list of currently installed programs.
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type control panel in the Search (Windows 8.1) or Search Apps (Windows 8) box.
Click or tap the Control Panel icon.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click the Windows icon, and then click Control Panel.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click Start, and then click Control Panel.
The Control Panel window opens.
Double-click Add or Remove Programs.
In the list of installed programs, click your HP printer name, and then click UninstallChange/Remove.
Follow the onscreen instructions to complete the software removal.
Caution
If the uninstaller asks you to remove shared files, click No. Other programs that use these files might not work if you delete the files.
You may be prompted to restart your computer.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Run the Microsoft Fix it troubleshooter to reset the registry entries
Sometimes the uninstall does not completely remove the software. Microsoft provides an automated fix for this problem on their web site. Follow these instructions.
Click here to open the Microsoft support solution:
If you like, review the information on the Microsoft web page.
We recommend that you click Run now in the Microsoft Fix it section to fix the problem.
Follow the onscreen instructions in the Microsoft wizard:
On the Are you having a problem installing or uninstalling a program? screen, click Uninstalling.
On the Select the program you want to uninstall screen, scroll through the list of programs and choose the entry for your HP printer series, and then click Next.
When the Microsoft wizard completes, you will be prompted to restart your computer. Click Yes to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Disable startup services
Windows allows many programs and processes to run immediately upon startup. These programs may be preventing you from installing the HP software. These directions explain how to disable these programs and processes temporarily so that you can install the printer software.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
Check to see if Normal Startup or Selective Startup is currently selected. If Normal Startup is selected, follow the indicated steps, below. If Selective Startup is selected, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To disable a Normal Startup
To disable a Selective Startup
Select Selective Startup, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Click Disable All.
Click the Startup tab, click Open Task Manager, and make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click the General tab, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click Disable All.
Click Apply, and then click OKClose.
A new window displays. Click Restart to continue.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Upon restarting your computer, the System Configuration Utility window may display. If it does, select the Don't show this message... check box, and then click OK.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Reinstall the HP software
Now that your system is updated, try installing the HP software again.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Printer Install Wizard download page.
Follow the directions to download and run the HP Printer Install Wizard.
Follow the onscreen instructions to download the printer software for your version of Windows.
The HP Printer Install Wizard downloads and starts the software installation.
Note
A full Windows 8 or Windows 8.1 printer software install may not be available for all products. Click here to find out if a Windows 8 or Windows 8.1 download is available for your printer.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following USB tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Support & Drivers web page.
Select the option to download drivers and software, and then type the name of your printer in the search box.
For example, type HP Photosmart B211.
Follow the prompts and make selections to display the software and drivers for your printer.
When prompted, select the appropriate version of Windows, to view the driver download and CD ordering options.
Tip
If you're not sure whether your operating system is 32-bit or 64-bit, click the Is the Windows version on my computer 32-bit or 64-bit? link on the page for help.
If given a choice, select the full feature software and drivers link.
This option may appear in an area labeled Drivers.
When prompted, click Save, and download the software to your desktop or a folder where you can easily find it.
Start the HP software installation by running the install program that you downloaded.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Some printer models require a USB connection during the install. If you are prompted by the software, connect the USB cable. Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Whether or not you installed the software successfully, make sure you follow the instructions in the next step to enable your startup software, or your computer may not function in the way you expect. Click here or click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Enable startup services
If you disabled startup services earlier, make sure you follow these steps to enable them again or your computer may not function in the way you expect.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
If you disabled a Normal Startup, follow the indicated steps, below. If you disabled a Selective Startup, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To enable a Normal Startup
To enable a Selective Startup
Select Normal Startup.
Click the Startup tab, click Open Task Manager, and then selectenable every item from the list you made in a previous step.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
On the Services tab, select every item from the list you made in step A.
Click Apply, and then click OKClose.
A new window displays, prompting you to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Try using your printer again.
If you successfully installed your HP printer, you're done! You can delete this troubleshooter if you'd like.
If the install was not yet successful, click here for further assistance.
Home Begin USB Troubleshooting>
Further Assistance Exit Start Over
Give us feedbackclose
Give us feedback
Select your answer, and then click the button that appears to send us your results.
Did this solution solve your problem?
Yes, it solved my problem No, it did not solve my problem I want to give HP more feedback. Take me to a short online survey to provide additional comments on how to improve this solution.
Exit without giving feedback
close
close
Confirm Exitclose
Exit Troubleshooter?
YesNo
For Further Assistanceclose
For Further Assistance
Visit HP Support Forums and connect with HP users to get insights, tips, and answers to questions about your product. Follow the link below to view the forums.*
Click here to go to the online HP Support Forums.
If you are still unable to install the HP software, please contact HP support.*
Click here to find HP contact information for your country/region.
* Support options and availability vary by product, country/region, and language.
OK

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Compressor not installing

Similar Messages

Maybe you are looking for