Compressor output to FLV using Flash Pro Codec?

I was told by an Apple Tech support person, after venting my frustrations over Apple's website promoting Compressor being able to output to FLV, that Compressor CAN output to FLV using the FLV codec that is available if you have Flash Pro Installed. (Part of CS3 Web Bundle)
I need to build things in Motion and output to Flash for website use, without having to spend almost $1000 for a motion plug-in. I think this is the only time that Apple has really advertised something that's not available without a lot more third party expense.
So... can someone explain how to use the Flash Pro Codec in Compressor to output to FLV?
Any help would be greatly appreciated!
Will H.

I have Final Cut Studio 2 as well as the Adobe Flash encoder and can't transfer a Quicktime to a FLV that plays back on ether of my systems. I shouldn't have to buy another application to do this.
Hope you or someone can help.
Standard misperception of FLV. FLV is not a self-contained movie, it requires a Flash Player running inside a Web page or the Flash application. You cannot even open the Flash Player and play an FLV unless the Flash Player…nevermind. It's weird, but that's Adobe for you.
You can play it back easily inside Adobe's free Media Player (it's beta but harmless). Free download for both Winderz and MAcintosh.
bogiesan

Similar Messages

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
can any one help me bcoz i have to publish without air runtime.......

Hi,
This option is available when your publish target is set to AIR 3.6.
You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
Thanks!
Mohan

Playback of flv using Flash Player 10.1 and Flash Media Interactive Server jerky.

Greetings:
Thanks for taking time to read this.
Here is our problem:
Playback of flv using Flash Player 10.1 and Flash Media Interactive Server jerky.
Playback ok if using Flash Player 10.0 with Flash Media Interactive Server.
1. Record live using Flash Media Interactive Server
2. Attempt to play back resulting flv using Flash Player 10.1 and Flash Media Interactive Server.
Video plays ok for a few seconds and then plays faster than as recorded -- very jerky.
Audio plays at normal rate.
OS: Windows 7 64bit (two different machines. All updates installed.)
Web browser: FireFox 3.6.10 and IE8 8.0.7600.16385
Flash version: 10.1.85.3
Tried with hardware acceleration on and off.
Note: Also had another person report the same thing on a Mac.
We had been using Flex 3, so we tried building with Flash Builder 4 – had the same problem.
This is a show stopper for us.
Tried using Wowza and everything worked.
We’re dropping FMIS and switching to Wowza.
If someone can suggest something else to try, we would appreciate it.

Hi Greg,
So if I understand correctly, your findings are:
Flash Player 10.1.85.3 + Flash Media Interactive Server = Jerky Video
Flash Player 10.0.x.x + Flash Media Interactive Server = Smooth Video
Flash Player 10.1.85.3 + Wowza = Smooth Video
And what about Flash Player 10.0.x.x + Wowza?
Also, if you could check the network traffic to confirm if it's Flash Player causing the issue or it is receiving it like that from FMIS.
Cheers
--Vikas

I need to change the height of a Captivate playbar using Flash Pro

I need to change the height of a playbar in Adobe Captivate. I have Flash Pro. I am very new to Flash Pro. I read.. "To change the height of the playbar, adjust the height of pbcBk_mc movie clip inside cpPlaybar symbol in Library". The problem is I CAN'T FIND pbcBk_mc anywhere. I see the cpPlaybar attrbute. When I click on it and look at the timeline I am not seeing an attribute for pbcBk_mc or height. Where in the world is it??

You start with a source / authoring file for the "static" content (e.g., Name, Last:). Say this is an MS Word file.
You master the "static" content..
You keep this authoring file and have a backup of this file.
You output a PDF and use Acrobat to build and fine tune the "form" (form = the form fields, not the "static" content).
The authoring file and output PDF (with form fields) gives you "rev 00".
Now, you must change something in the "static" content.
Open the authoring file and save as to a new version (e.g., "wordfile_v00" becomes "wordfile_v01).
Output this to "pdffile_v01".
Use Acrobat to open the PDF form file "pdffile_v00". Save As to a new file name ("pdffile_v00update").
Using Acrobat XI Pro the click-path Tools - Pages - Replace lets you replace a page or pages of "pdffile_v00update" with a page or pages from "pdffile_v01".
This replaces the "static" PDF page content and does not affect the form fields on the page.
(you may have to adjust position of form fields)
Save "pdffile_v00update" to "pdffile_v01" to reflect the revised status of the PDF form file.
Be well...

.swf to .flv using Flash 8 Video Encoder

I have brought a .swf file in to Flash 8 Video Encoder to
convert to a .flv file, after Queue is completed the .flv file
doubles in size. I tried changing the "key frame placement" and
"Date rate" to bring the file down but the .flv file doesn't go
down that much. So what am I missing? I want a .swf 8,166 KB to be
a .flv about half that size, is this possible? If so, am I using
the wrong program?
vicky

well that's the thing - the metadata never traces out if the
video was encoded with flash video encoder, but that code would
work fine with video encoded with sorenson squeeze.
think I have worked it out now though: in order to pause the
video at start I am calling NetStream.seek(0) when I receive
"NetStream.play.start".
For some reason when I do this with flvs encoded using flash
video encoder, it stops the onMetaData event from firing - but
works fine with other flvs! weird... shall have to find another way
of pausing the video at the start I guess.
thanks for the reply though

Using Flash Pro and Flash Builder together | Learn Flash Professional CS5 & CS5.5 | Adobe TV

Adobe Flash Professional CS5 and Adobe Flash Builder 4 enable time-saving workflows. Learn how to develop content in Flash while editing associated ActionScript code in Flash Builder 4, switching easily between the two applications to edit and test.
http://adobe.ly/w50IJm

This doesn't seem to work the same way in CS5.5 / CS6
In the video the class files are associated with the FLA, when you switch back to Flash Pro...
So far, when I follow these steps the classes are not associated with the FLA, the class field for the stage in Flash remains blank.
Also, clicking the edit icon in the properties of a MovieClip and allowing FB to create the file, does not associate the as file with the MovieClip.
Returning to Flash Pro and clicking the Edit button attempt to create a new file once again, but since the file already exists in FB it just remains on the New ActionScript Class dialog, with the Finish Button grayed out (because a file with the same name already exists in FB).
The resulting AS files for a given are created in a sub folder under:
Documents/Adobe Flash Builder 4.6/[Project]/src-[Project]/*.as
Yet the FLA is located in Documents:
Documents/[Project].fla
Should the as files exists with the fla, is a folder reference supposed to be set, or did I miss a step somewhere?
Is a source path supposed to be added to Flash Pro for:
Documents/Adobe Flash Builder 4.6/[Project]
I am currently on a Mac, but noticed the same behavior in Windows at work yesterday.
Thanks,
Josh

How can I get a frame accurate output to tape using Premiere Pro CS6 and a Blackmagic Decklink Extre

i can set the frame offeset inside the Export to tape tool (which BTW is horrible, you can't scrub, you MUST use ":" or ";" in the timecode fiellds or the deck just goes to the beginning of the tape etc), but I'm still 12 frames off. there is a frame offset in the Blackmagic device control settings, but that does nothing for the output to tape.
I don't want to have to export a quicktime and then open it in Final Cut to output to tape, the whole object is to get away from FCP because it's a horrible ghorrible program.....TIA
This particular system is an 8core Nehelem Mac Pro with 32GB of ram, OS 10.7.5.

I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

Can't convert MP4 to .fLV for flash using encoder CC 2014

Hi
Seriously adobe, I wish I never upgraded to CC, it's been a nightmare.
I need to convert an MP4 to an .flv for flash pro CC. Encoder CC no longer supports this, which is UNBELIEVABLE....
I use a third party vendor for video in flash banner advertising and it only supports .flv files.
Can someone tell me what other programs allow me to so the MP4 to FLV conversion?

> Can someone tell me what other programs allow me to so the MP4 to FLV conversion?
The previous version of Adobe Media Encoder or After Effects, which you can have installed alongside the current version:
removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro

Should I render a looping movie in After Effects or in Flash Pro?

Hello. I am using Flash Pro CS6.
Right now I am trying to make a simple SWF file that can play three looping clips via individual play buttons.
I made three FLV movies in After Effects. They are 80 frames , 30 fps clips, but those clips have lots of same frames. I mean one clip is something like this.
AAAA BBBB CCCC DDDD AAAA
AAAA DDDD CCCC BBBB AAAA
AAAA BBBB CCCC DDDD AAAA
AAAA EEEE FFFF BBBB AAAA
It contains just 6 frames(A,B,C,D,E,and F). As you can see there are lots of same frames.
I want to make SWF as small as possible, so to make it small, I should import still images and make a new timeline in Flash pro and render them as SWF in it?if I import still bitmap images(ABCDEF images) into Flash Pro and make a SWF in it, Flash Pro can do better compression than AE? If so I will remake the timeline. I really need better compression because I need to submit a SWF file whose limit is 5MB.
If I need to make my SWF small,Which is the best choice? Making a FLV in AE and import it into Flash Pro and publish, OR Making a movie using those still images in Flash Pro and publish? Give me your advice. Thank you in advance.

Thank you for your advice.
Is it better to make a movie in Adobe Flash? Can you explain the merit? I always use AE and it's much easier for me to make a movie in AE, if there is not big difference I want to stick with AE timeline. Tween function is kinda hard to handle.
And thank you for the FLV info.I will upload them and use them as an external clip.

Need Help testing iOS app created in Flash Pro Cs5.5

I've followed several instructions on how to develop a simple iOS app. I've managed to go all the way through and Publish + create the .ipa. I'm able to then add the file to my iTunes library, but when I then try to add it to my iPod Touch (2nd Generation) I get the following error:
The app "XXXXXX" was not installed on the iPod "XXXXX's Ipod" because it is not compatible with this iPod.
I've even tried it with a simple "Hello World!" app but I get the same error.
I'm using Flash Pro Cs5.5 on a Windows PC.
Any suggestions?

I'm having the exact same problem with my iphone 3G. I tried publishing the exact same simple flash app to my iphone, which I already previously tested succesfully, after having downloaded flash 5.5, and now I get the following message (which, I believe, is identical to yours kinant87) :
"The app "Main" was not installed on the iPhone "Norgaard" because it is not compatible with this iPhone."
I was trying to make another small app, when I got this problem, which is why I went back to re-test the app I knew was working!
I've reinstalled all my apple certificates, and also tried using flash builder 4.5, with the same result.
I also have not jail broken my phone, and was starting to think perhaps the iPhone 3G was no longer supported?

Flex SDK & Flash Pro

I don't program in Flex or Flash Builder. I tend to build my app interfaces as I go, So coding in flash professional seems the way to go. It seems to me that there are a lot of extra steps designing the interface, converting it to a flex component, and then doing all the coding in Flash Builder, when I could just do the coding in flash. This is from my stand point as I see it, having never programmed in Flash Builder or Flex. But there has been times when I thought. Wow it would be cool to use this or that flex component.
Anyway, getting to the question. I just noticed the other day that the Flex SDK path is included in Flash pro CC. Why is this? Does this allow us to use some of Flexes capabilities in flash?

I think the intention behind that is so that if you connect it to Flash Builder it will automatically fill that value in for you (FB needs it to be filled in, even if you're using Flash Pro as the compiler). However, like many features that are related to using the two tools together, it doesn't work properly.

Need help with languages issue in iOS app created in Flash Pro CS5.5

Hello all,
I'm using Flash Pro CS5.5 on a Mac running Snow Leopard to create an iOS app by publishing with 'AIR for iOS' from inside Flash Pro. Everything works great except after I submit my app to the Apple App Store and it is approved, the App Store listing claims that the app is available in a ton of different languages including English, German, Chinese, Italian, Spanish, etc. Since this app is a word game and all the words are in English, this is a pretty significant issue.
If I view the binary details for the app in iTunes Connect, it shows that localizations are active for all of the different languages. This information is read from the .ipa file that is submitted.
If I unzip the .ipa file, I can see that folders have been created for all of the localizations (i.e. en.lproj, es.lproj, fr.lproj, etc.). If I delete any of those folders, the .ipa will give me a 'resources modified' error at install.
I have also tried setting the plist attribute 'CFBundleLocalizations' to 'English' by editing the 'app.xml'. I have verified that the attribute has been changed correctly but it does not solve the issue. All of the localizations are still active.
Any help would be greatly appreciated.

Can you try workaround given at http://forums.adobe.com/message/3976641 and post back your findings.

How do you obfuscate APK for Android that is published with Flash Pro CC ?

I created an application for Android smartphones using Flash Pro CC.
I don't know much about obfuscating APK files but I heard that APK can be easily decompiled and therefore my AS file sourcecode is vulnerable. So I started searching on google and found that ProGuard does obfuscation. But it's for Eclipse so I guess i can't use ProGuard for my app which is created using Flash Pro CC. Is there any way to obfuscate my APK? or is there any other way to protect my APK?

ProGuard is a command line utility as you can see here:
ProGuard
ProGuard is a command-line tool with an optional graphical user interface. It also comes with plugins for Ant, for Gradle, and for the JME Wireless Toolkit.
While it's nice to use it in an integrated environment you should investigate the usage of it on the command line.
An APK is a .zip file. Feel free to unzip it and explore the contents as any other person could. You'll see what exactly is exposed to others. Consider by what you see if anything is actually in danger before you pursue a potentially complicated or unnecessary procedure like obfuscation.

Looking for tutorial or developer to for hotkey extension for Flash Pro.

I'm using Flash Pro CS6 on a Windows 8 touch/pen tablet. In put tablet mode, some of the common commands, especially undo, are difficult to reach without hotkeys or keyboard shortcuts.
What I need is an on-screen panel with big easy-to-hit "Undo" and "Redo" buttons that I can use as hotkeys on the touchscreen, much like the hotkeys on a Wacom Intuos or Cintiq. I have a little programming knowledge, but don't know where to start in creating an extension panel like this.
Can anyone suggest a good sarting tutorial for this type of add-on, or would anyone be willing to bash out such an extension?
Thank you for your time.

Hi Arafat,
Thank you for the suggestion but I had already looked at that.
I am looking for a working example or step-by-step tutorial that updates a table in SAP, using ABAP webdynpro. The PO example provided with Designer does not connect with SAP; also, the tutorial steps provided in the Designer Help do not even match the way the example form is constructed! (Help says use table object, the example pdf uses a repeating subform).
My problem seems to be in the binding between the form and SAP. I have tried various changes and nothing I try is transferring any data except the first row of the table.
I hope someone has a SAP example for this situation.
Margaret

Compressor output to FLV using Flash Pro Codec?

Similar Messages

Maybe you are looking for