Compressor setting for DVD Studio Pro

What's the best Compressor (v.3.5.3) setting for DVD burning in DVD Studio Pro?
I used DVD: Best Quality 90 but the DVD burned via DVDSP plays on a Mac but not on DVD players and PCs.
The DVDSP log contains this line for each of the four video and audio assets:
Note: The file ‘<filename>-MPEG-2 6.2Mbps 2-pass.m2v’ found in the ‘Final edits’ folder is not a DVD-Video file and will not be included in the final disc or DLT.

Message means nothing. It could be the brand of DVD media you're using. Have you tried it on set top DVD players?

Similar Messages

What format to export fcdp project recorded on sony z1 for dvd studio pro

what format do I export a Final Cut Studio project recorded on sony z1 HDV for dvd studio pro. I am getting lines on the edges if I export current settings.

finalcut.ie wrote:
he says sd is this right when i want a hd dvd?
HD-DVD is a dead format. It may play on your mac - or an HD-DVD set top player, if you happen to have one - but nowhere else. If you just want playback on your mac, compress to h.264 with your current frame size. If you want a DVD it will have to be SD and Mpeg-2 as Shawn already explained.
mish

Emergency questions exporting for dvd studio pro (ntsc and pal)

Hi,
I'm under a tight timeline and would appreciate any help possible. I'm experimenting with outputs/burning today so the real thing can happen tomorrow.
I have an hour long project that was shot on two different kinds of cams -- a sony hdv V1U and pan dvx100b. The first shot mostly in 16:9, the second squeeze 24p. We imported all footage as non-hd though, because the V1u has had problems syncing properly with hd settings with final cut. The issue/question now is this-
I don't know what file format (I'm assuming mpeg-4 for DVD studio pro, but using compressor or no?) or settings to use -- I'm used to mpeg-4, but for some reason it is coming out all grainy/pixelated and I'm not sure if I need to adjust the settings. Also, once exported into a usable/high quality format, I need to burn a ntsc dvd but also a pal dvd -- I've burned pal dvds on dvd studio pro before and know adjusting the settings is just in preferences, but I'm assuming the video will need to be converted into a different kind of file. Or no?
My sequence settings are 1440x1080 (16:9), quicktime video settings compressor hdv 1080i60. When I export as a quicktime file the conversion is great and no problems, but that isn't workable in dvd studio pro.
I would appreciate any advice you could offer,
Thank you,
Tenzin

Thank you, I'm trying that -- someone else just mentioned it needing to be an mpeg 2 file as well. The trouble I'm having now in compressor is it isn't converting when I press submit -- nothing is showing up in the batch monitor. I've tried this directly exporting from fcp using compressor, as well exporting quicktime from fcp and then using the quicktime file in compressor.
I'm not used to using compressor so I'm thinking I am not doing something properly in this process? Thank you for the suggestions, they are reassuring. Do you know if the same file produced by compressor can be used for the pal dvd?

What's the best way to master an MPEG 2 file for DVD Studio Pro.

In version 4.5 of FCP I was able to use QuickTime conversion to encode to MPEG2. Now that option is not there. I hate using compressor 2 to create MPEG 2 because when I do the MPEG 2 files always seem to studder and I don't know why. I shot my project in HDV. It is about 64 minutes long. Any suggestions on the BEST way to master an MPEG 2 file for DVD Studio pro? Thanks in advance!
Peter
PS - I'm using FCP 5

Some people have reported a field reversal problem with HDV to SD DVD encodes. There's an Apple technical document on this issue somewhere, but the problem was supposed to be addressed by a Pro Applications update a couple of years ago... This site might help you get to the bottom of the problem.
http://www3.telus.net/bonsai/Step-by-Step.html

Exporting FCP movie for DVD Studio Pro

I am finished with my movie. I am confused now on the exporting to DVD studio pro. How do I do this? My viewer also would like it to be in widescreen because they had just bought a HDTV widescreen.
So how do I go about this. I have made many with iDVD but this will be my first with Studio Pro.
How do I export for DVD studio Pro?
PowerBook G4 Mac OS X (10.4.8) 2GB - 100GB Hard Drive

The most important thing you can do to help us answer your question is to give us the specs on your project. Open Final Cut Pro and click into your sequence. Then go to the menu "sequence" and go to "settings" or simply hit a command-0 (the number not the letter). Then tell us the frame size and the compressor used. From that information, we can get a better idea on how to help you: it is best to start any post with this information.
To export the best quality, go to file -> export -> QuickTime Movie...
From there, export using current settings, include audio and video, and make sure the bottom two boxes are checked (recompress all frames and make self-contained)
Once that file is created, import into DVD SP and you're done. Don't worry about compressor or other formats right now. This will give you the best picture with the minimum amount of headaches. Let us know how it turns out.

How do I prevent errors importing foreign characters into subtitles for DVD studio pro?

How do I prevent errors importing foreign characters into subtitles for DVD studio pro?
I have figured out just about everything necessary for creating subtitle tracks in several foreign languages, but the only problem is that some individual characters in some languages (like the "open quotation mark" symbol in Lithuanian!) do not import properly into the subtitle track. I can type or paste the symbols in manually, but this means doing it hundreds of times in several different languages, and defeats the purpose of using the system I've created.
Does anyone know how to import some of these odd characters.
I import characters using a text file saved in Unicode-16, and I set the language of the track to the proper language (for instance, Lithuanian).
I can't find the answer anyway, and really am stumped!!
Thank you!!

i think i might have figured out a solution. it's a quirk in the program. i noticed that sometimes the quotation marks DO actually import, but only if they are in the middle of a sentence. they only FAIL to import at the beginning of a sentence. so, what i did was to paste a space before the beginning of every sentence with a weird low-down quotation mark, and it imported fine.
and it also seems to kill two birds with one stone, because sometimes it seems that DVD studio pro cuts off a few pixels at the beginning of a line -- so with a space inserted it just cuts off...nothing.
so far so good. thank you for trying to help, Tom. MUCH APPRECIATED. this stuff can be very frustrating. i'm already going bald fast enough....erg.

What is the best compressor setting for dvds

What is the best compressor setting for dvds that is not for HD dvd players? I used "DVD Best quality 90 min" and changed the GOP setting to 7.5 and my dvd looks terrible. the text is blurry and the colors are bad.

correction the bit rate is 7.5

Compressor Incompatible Formats for DVD Studio Pro???

I'm at my wits end...I have exported DV/NTSC QuickTime movies from Final Cut Pro and then drug them into Compressor, where I have applied the "fastet" DVD encodes for SD video of 90, 120, & 150 minutes in Compressor (all Apple presets that I have not modified). The files come out, but when I try to drag them into DVD Studio Pro, it tells me that the video files are of an incompatible format. What am I doing wrong here? Any help will be greatly appreciated!

If you did not touch the presets, the first thing I would look for is whether you set the project to PAL and were trying to bring NTSC streams in or vice versa. ( If you had changed anything, such as the Codecs or typew of MPEG-2, then it could be something else.) Any details on the computer or veersion of Compressor and DVD SP?
Is this an upgrade over a prior install?

Best setting on DVD studio pro for PNG vid from final cut w/1280x720 res

Okay, so I am trying to find the way to make my video look best on a 720p tv set. The video is for kiosk use, so will only show on this one tv over and over. I want the text to look super crisp and sharp, so I have exported the video from final cut studio as a png with 1280 x 720 HD resolution. When I import it as an asset on DVD studio pro I notice that the resolution in the track menu is showing as 720x480i. What's the best way for me to setup DVD studio pro, so my video retains as much clarity and sharpness as possible? Is there no way to make it super sharp on an SD DVD? I set the encoding to Two pass VBR and the bit rate to 6.8 and max bit rate to 8.0, motion estimation to best... any tips would be highly appreciated. Thanks.

I want the text to look super crisp and sharp
then use a computer and presentation software, Powerpoint, Keynote Open Office Impress which is FREE
1280 x 1024 rez is a basic standard these days
http://www.apple.com/iwork/keynote/
http://www.openoffice.org/product/impress.html
I have exported the video from final cut studio as a png with 1280 x 720 HD resolution.
this is waste of time, your next step is compressing this image down to something like a tenth of its original size with much lower rez to an MPEG2
if you want acceptable results at video rez 720x576 PAL then use DVDSP
but you have to accept that creating a DVD severely compresses the video to MPEG2, which is fine for moving video but isnt the sharpest compared to computer rez.

Is it necessary to use Compressor for DVD Studio Pro*

I am making a FCP X movie and when it's finished I want to put it on a DVD using DVD Studio Pro. I have done this before but now I'm wondering if I should first export it to Compressor 4 and then to DVD Studio Pro. I understand that if I was puting it on YouTube or an iPod device I would need to Compress it however why would I need to go to Compresss 4 first if ultimately going to DVD Studio Pro? Would I get a better Codec quality then what I get from exporting in FCP X using their default Compression format i.e. Quicktime? Should I use an Apple ProRes Compression from Compressor 4? I guess I really don't understand the encoding quality options very well however I do want the best quality on my finished DVD. The DVD or Sequence is somewhere around 20 - 25 minutes if that makes any difference in your response.

The following applies equally to both C4 and C3.5 (which you have, if you have DVDSP). There is really very little that C4 can do compared to C3.5.
Bring your movie into Compressor as the source file. Drag the MPEG2 and Dolby Digitlal presets into the Batch window. Set the destination where you want your output file to be saved to.
If you are using HD material, open the Inspector>>Frame Controls and activate Frame Controls. Set Resize filter to Best. (If your source file is SD skip Frame Controls.) In the Encoding section, click on Quality and in mode change to CBR. Set your bit rate to 7.0.
Test a short representative section of your movie by marking a range in the Preview window. Submit.
Take your test file and drag it into the DVDSP asset pane. Do your build. Open it in DVD Player and see what you think. If you like the results, proceed with your project. If you're not satisfied, tweak your settings and test again.
Good luck.
Russ

Exporting Chapter Markers From FCP7 to Compressor for DVD Studio Pro

I put several chapter markers in a Final Cut Pro 7 sequence by hitting the "M" key a few times on the timeline.
I tried exporting the video with Compressor, both by using "Share" and "Send To Compressor."
When I load the post-Compressor video files into DVD Studio Pro, make a track, and look at the track timeline, the chapter markers are not there.
How do I send the video files from FCP7 to Compressor to DVDSP and have the chapter markers survive the journey?
(NOTE: I am not using Final Cut Pro X, where, I understand, that the problems with chapter markers are a whole different ballgame.)

When you hit m twice and get the marker window:
1. Make sure the marker is created on the timeline, not the clip;
2. you have to specify that it's a chapter marker. There's a pulldown or something to select it. It's NOT automatic.

The size of my exported FCP movie is too big for DVD studio pro

Hey,
I have been editing for 4-5 years now and have never had a problem with size of a project to put into DVD Studio Pro to burn. However, I just finished a 2 hour project in which exported as a FCP movie it is 23.97 gb in size. When i put this into DVD Studio Pro it makes it 4.8gb in size which just makes it too big for it to burn. I have tried changing the compression to no avail and just now decided to clean up the timeline so everything is on one track with nothing overlapping. (The problem was it was a 2 camera shoot so the first camera i had on the bottom track constant with the second camera on the top track when i needed it but still with the first camera underneath.) Do you think this could be the solution to my problem? If you guys could help me out it would be most appreciated!

some things don't make sense here. please clarify.
Standard DV is roughly 5 minutes per gig, so that means that you have just about 2 hours of video, ok, got that. Now it's the two track thing that gets me.
Are you saying you have 4 hours of footage, the same thing from two cameras, and you're trying to set up a multi-angle DVD?
If it's just that you used two video tracks to edit, then NO, it is not your problem. It's still only 2 hours, the video will be mixed down to one track upon export from FCP to quicktime.
My suggestion is, instead of bringing a quicktime file directly into DVDSP, use compressor. I believe they have a preset in compressor 2 for a standard 120 minute DVD. IF you're project is truly less than 120 minutes, than that should be fine. If not, then you may have to manually make your own setting and lower the bitrate.
So the workflow is:
-open sequence in fcp
-file>export>quicktime movie... (you can uncheck "make movie self-contained" if you want it to export faster and you plan on keeping your original capture footage around)
-export your movie to a directory of your choice with a name of your choice.
-open compressor (in applications)
-drag the quicktime file you created into compressors main window, this will set it up. Now specify the export setting (120 minute HQ all files either 16x9 or 4x3 dep. on project) and specify a location for the files to be created. I strongly suggest that you use the HQ (High quality) settings in compressor. It's much slower to process, but much better quality.
-with a 2 hour movie it should take a really REALLY long time to compress, so I'de say do it over night.
-when compressor is done, you should have 2 or three files. a .m2v file a .aif file, and a .ac3 file. The .aif is your PCM audio, much better quality than the .ac3, which is dolby 2 channel. However, the .ac3 is a much smaller file with a lower bit rate, so if the .aif makes the DVD file size too big, you can switch it out for the .ac3
-Finally, open up your DVDSP project, drag the .m2v, .aif, and .ac3 into DVDSP and use the .m2v for the video track and either the .aif or .ac3 as the audio (as mentioned above)
-the good news is, your DVD media is already rendered, so when you go to build your DVD it will go much, much faster!
By the way, I recommend you go to file>advanced>build do not do a burn and build.
I find it best to build the VIDEO_TS folder on a hard drive and then use a program like toast to create a DVD (using toasts from VIDEO_TS option). This method also allows you to go back into DVDSP, make tweaks, and reuse your VIDEO_TS folder, not having to rebuild the whole thing each time.
Remember, 120 minutes on a single layer DVD is going to render fairly low quality no matter what.
If you have a newer mac and a dual layer drive, you may want to cough up a few bucks and get a dual layer DVD-R, then you have over 8 gigs of space to work with, perfect for HQ 2 hour footage.

Compressor footage crashes dvd studio pro 1.5

hi posted this a while back in dvd studio pro forum but there was no answers. I am still getting same problem so thought I would seek advice again.
I am after some advice after I encountered a problem using footage converted with compressor in dvd studio pro 1.5.
If I compresss footage using high quality encode through fcp with compressor option it causes dvd studio pro 1.5 to crash with unexpected error occured, about half way into building either disc or img file .
If I convert the footage using quicktime conversion and guessing bitrate then it works fine .
one thing I have noticed is that the m2v file has a timecode beginning 1 rather then 0 which it has if I convert using the other method, so maybe I have something wrong in compressor settings?
what would be an ideal setting for a 80 minute film?
I am using fcp 4.5, compressor 1.2.1 quicktime 7.0.3 and os 10.3.9
thanks

Hi Adrian
I'm wondering if your build is crashing due to a bitrate spike caused by Compressor - it's reknowned for this. In DVDSP2 and above you get a warning in the log when this happens, maybe 1.5 is somehow missing this. Quicktime's mpeg exporter is a much more stable encoder and doesn't suffer from bitrate spikes. Another thing to have a look at is your audio. If you're using the .aif file that Compressor or DVDSP creates it's a pretty high bitrate od 1.5Mbps. If you re-encode your audio using A.pack to Dolby 2.0 with a bitrate of 192kbps you'll give yourself alot more headroom even with bitrate spikes.
Hope some of this helps
Good luck
B

Compressed film to big for dvd studio pro - help

I have a wedding film which is 2 hrs and 6 mins long at final edit... it was a long wedding!
I used the 150min preset in compressor for audio and video but when i add it to DVD studio pro it takes up 5.3gb, far to much for the single layer DVD. Can anyone give advice to get the down so that it is under 4gb and not on the red?

Hi Allister,
Did compressor make a AC3 file ?
If not, encode your audio to AC3 and the file size will srink quite a lot.
Here's a good Bitrate calculator to have for future encodes:
http://www.railheaddesign.com/index.php/software/bitratecalc/
Better to set the bitrate yourself.
Bill

Exporting from Final Cut Pro for DVD Studio Pro

In the recent DVDs I've made, the quality seems lower than it has before. I don't think I've changed anything, but I was wondering what is the best format to export a clip from Final Cut Pro and the best way to encode those clips in DVD Studio Pro. Thanks for all your help!
Erin

The best and only format is mpeg2/m2v.
The encoding rate for video is based on the length of the sequence in h/m/s.
They should not be encoded in DVDSP, but exported as a self contained with current settings, no recompression and dropped into Compressor.
Based on length and the type of footage, elect a preset for video and elect Dolby 2 for audio

Compressor setting for DVD Studio Pro

Similar Messages

Maybe you are looking for