Compressor settings for All Region SD DVD?

I have a HDV PAL project which I need to burn to SD DVD, the DVD needs to be playable in NTSC regions as well as PAL.
I have been told that I can encode the clip as NTSC and it will play all regions.
Can anyone confirm this and / or have recommended settings?
The FCP project is PAL HDV with compression set to ProRes 422.
Cheers!

Ok, here are the realities of the situation. NTSC DVD players cannot view PAL. Most, but not all, PAL DVD players can view NTSC. The region settings do not really have anything to do with this. It should be also noted that NTSC is slightly lower in quality than PAL.
So if you want to only replicate one disc for worldwide distribution, then NTSC would be a better choice. You are still going to get people at random saying, "It will not play". The better solution would be to create a NTSC disc for NTSC countries, and a PAL disc for PAL countries.
It should also be noted that you use Compressor to encode your MPEG-2 videos (and AC3 audio), but you then have to bring those files into DVD SP for authoring.

Similar Messages

Best Compressor settings for HD720 16:9 to cell phone OTHER than iPhone?

Hey there,
Does anyone know a good set of compressor settings for exporting HD720 16:9 29.97fps to a cell phone compatible format other than iPhone? Do most cell phones use an MPEG format? I guess I should start there. New to this one.
Thank you,
ed

There are different MPEG flavours and compression for DVD, mobiles or web often means creating some flavour of MPEG file. Even H.264 is an MPEG file. One of the most advanced.
Go to Compressor settings and look for a folder named Mobile devices then do a bit of your DIY (test, test, test).
G.

How to set the same General settings for all users

Hi Experts,
How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
Regards,
Arti.

Hi Arti!
You can default user settings in a PFCG role, in the "personalization" tab.
If you have a PFCG role that is common to all your users, you can set the default values here.
However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
Matthias

How to change settings for all users?

Hi All,
In cPro we have User Settings button. On clicking that we get a Tabstrip where you will find "User" tab.
my question is: How can we change the default settings for all users e.g setting the checkbox "Scheduling only manually" to true ?
Best Regards,
Arti.

Hi Arti,
In cProjects the authorizations can be managed either by authorization profile administration by system administrator for General authorizations or by Project specific authorizations for individual cProjects elements by Project owner.
Try the first one and I hope you will get the solution.
Regards,
Nishit Jani
Award points only if you find the information useful.

How to configure default parental settings for all users (10.7)?

Hello,
I've made a silent installation of iTunes using MSI files and it works well.
I need to enable parental controls and configure it. Users must be preventing of changing these settings.
At the end of the iTunes installation I automatically created registry keys :
[HKEY_LOCAL_MACHINE\SOFTWARE\Apple Computer, Inc.\iTunes\Parental Controls]
"AdminFlags"=dword:001b7ac5
"AdminMoviesLimit"=dword:000000c8
"AdminTVShowsLimit"=dword:000001f4
"AdminRatingSystemID"=dword:0000000b
"AdminGamesLimit"=dword:0000012c
According to http://support.apple.com/kb/HT2102 it is the procedure to set default parental settings for all users and to lock these settings.
When iTunes is first launched, parental settings are not set nor locked.
I use iTunes 64 bits on Windows 7 64 bits.
Where is the mistake?
Thanks in advance.

You can set up a system cache for sharing jars: See here: http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/enterprise_config.03.06.html

Win7 and Reader X - default settings for ALL users/profiles

I have a custom browser/app that opens PDF's within the app which can sometimes cause issues. I found that if I set Reader X to not open in the browser (Edit>Preferences>Internet - uncheck "Display PDF in Browser") that this does resolve most issues. My problem...when changed this only affects the current user/profile that's logged in. Potentially there can be dozens of users on these laptops. The other setting is when opening a PDF, I get the warning about Protected Mode not being able to be used due to the current configuration. I can select "Always open with Protected Mode disabled" and I no longer get the message; but again, current user/profile only.
Is there a way to set these settings for ALL users/profiles? Running Win7 (32bit) with Reader X.

I do not know why you experience this; what exactly happens when a non-admin users attempts to highlight something?
You are talking about highlighting in the same document?

Security settings for all users

I recently developed a document that requires digital signatures and have been testing it. The only downside is that when a user opens the document, Adobe prompts for the installation of new security settings, and it installs it for that user only. I need to add a registry key to the new security settings, but it is only available to be added to the current user hive. Does anyone know how to install the new settings for all users?
Here is the registry key I need to add.
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cPubSec]
"bSelfSignCertGen"=dword:00000000
Im using Adobe Reader 9.3 and Win XP.
Any help would be terrific!
Thanks.

Hi,
There are really two separate issues. First, is Adobe pushing updates to the Acrobat Address Book (i.e. adding certificates as trust anchors) and the second issue is how you can push your own update to disable the creation of self-signed digital IDs. Although the two issues share an underlying mechanism, they are separate and you cannot leverage one for the other.
First issue first. Adobe has entered into partnership with certain Certificate Authorities and has created a mechanism to add their certificates to the Acrobat Address Book (aka Manage Trusted Identities) using http to send a copy of the Security Settings file that contains only digital IDs. There are two ways to trigger the download process. One is to go into the Preferences, select Trust Manager, and click the Update Now button in the Automatic Updates group box. The other method is to load the DigSig plug-in (beginning with Acrobat 9, plug-ins no longer load a launch in order to speed up the launch process). As I'm sure you have deduced, opening a file with a signature field cause the DigSig plug-in to load which in turn triggers the automatic download. The reason we have limited the automatic download to DigSig being loaded is because the vast majority of people viewing PDFs are not using the digital signature functionality (much to my personal chagrin because the more people use digital signatures, the better my job security ) and we didn't want to bother them with an update they would never need. People already complain that there are too many updates, and we are trying to limit the irritability factor. To close the loop on this function, once the download process has been triggered the Acrobat check two more things before it does the update, 1) has it been a month since I checked and, 2) if it has been a month is there a new file to download. This way we are not pestering people with unneeded updates, or if they do need the update, at least not too often. And finally, Address Book management has to be on a per user basis. A certificate that you may elect to trust could be a certificate that the next person want to specifically keep untrusted. The Windows Certificate Store, Mac Keychain and Firefox Certificate Manager all work on a per user basis.
That brings us to what you would like to do. The good news is you can use the Export Security Settings featrue to create a distributable file that will set the preference. The real question is how will you distribute the file, but before we get to that, here is how to create the file.
With Acrobat closed, set the registry setting you noted in the message above
Launch Acrobat
Select the Advanced > Security > Export Security Settings menu item
Click the Deselect All button on the Export Security Settings dialog
Select the Signing Preferences Settings checkbox
Click the OK button on the Export Security Settings dialog
Select Signature Creation Settings and note "Allow creation of self-signed Digital IDs" is set to No
Click the Export button on the toolbar
Follow the on screen dialogs. You don't have to encrypt the file, but you must sign it with a certifying signature
At this point you have the file available for distribution. You could e-mail it to your intended recipients with import instructions, or you could post if for download, or you could set the Preference the to automatically push the file from a server. To check this feature out select the Edit > Preferences menu item and then select Security from the Categories list box. You would need to select the Load security settings from a server checkbox and then set up the URL. As an aside, you can also export these settings by selecting the Automatic Update Settings checkbox on the Export Security Settings dialog noted in the bullet points above. You have a chicken and egg problem in that you have to get the users to first manually import the file in order to set up the automatic import. That I can't help you with, you're just going to have to decide what works best for you.
Good luck,
Steve

What is "Use Settings for All iViews"?

Dear all,
Could anyone tell me what is "Use Settings for All iViews" in the presentation setting of folder under the document sharing iView in the collaboration room?
Thanks and best regards,
Marcus

The layout set you choose here normally just applies to the exact iView you are currently in, so it is tight to the current folder as well as the iView you are using to see its content right now. Using another iView to display the content of this folder might use a different presentation. But if you want to make sure that this folder is presented in a certain way in every iView (e.g. if you want to show a picture folder always with a thumbnail explorer), then you choose "Use Settings for All iViews". But be careful: this is really sticky -- you won't get rid of it easily if the chosen layout has no "Details" link to the parent (e.g. an HTML renderer). In this case you can only reset this setting with the administrative "Folder Settings" helper under "Content Administration/KM content/Tools"...
Regards, /-/ansi

Need a program that will save the capacity settings for all storage bins

Hey all,
I would really apprecaite any help with a program I am trying to come up with.
What I need to do is create a program that:
1. Will save the capacity settings for all storage bins to
a file
2. Then update them all to allow unlimited capacity BUT be able to revert back to the
original that was saved.
Any suggestions about possible existig reports that I may be able to modify to suit my needs, or where to start from if I have to do this from scratch?

I know I'm talking about expensive apps, but having been in prepress for about 30 years now, I really don't look at anything other than Quark XPress or InDesign for page layout apps. Your printing vendor will also be much happier with you when you use these products. Some areas of the U.S. tend to be mostly Quark oriented; others, InDesign. Ask your vendor what they would prefer, and if there are any free or cheap alternative apps they'll accept documents from.
Apple's Pages app (part of iWork) is a decent page layout program, but hasn't been updated in four years. It also doesn't support CMYK. If you place a CMYK image in the app, it will export out an RGB version of it. Not good! You can work with RGB images if you prefer, but your CMYK translations will be left to the skill of the print shop you use to do the conversions.
Don't even think about using Word. It has what it calls a page layout option, and does pretty much work like one, but there's no good way to import it into a real layout app such as InDesign. You end up paying the printer for their time to rebuild your entire project in either XPress or InDesign so they can actually do something with it.

Registry settings for Itune burn cds & dvd drivers missing...

When Itune starts a msg appears stating that registry settings for import/burn cds/dvds missing. advises reinstall Itunes. Reinstalling Itunes does not resolve problem. Itunes will not burn cd/dvd...XP system, dell xps computer. Except for "burn" issue, Itunes works ok. request help

Try reinstalling the GEAR drivers. They make a stand alone installer, which is available here:
http://www.gearsoftware.com/support/drivers.cfm
fixed?

Downgrade Compressor Settings for longer DVD

I work with very simple standard definition 4 x 3 aspect video and sometimes make DVD's Compressing with the various Stock DVD Compressor settings. I have never made a custom setting with Compressor. Now I would like to put a 200 minute video on a standard DVD (not dual density).
Can I modify a default setting like the 150 minute, and downgrade the quality enough so that the 200 min results would fit on a 4.6 gig DVD? (maybe room for a very simple menu.) Do I have to make a new setting from scratch, or could I modify and save, working from a default? Like I say, I have never made a compressor setting, so I could appreciate a sort of step-by-step.
Thank You
Richard Miller

Duplicate the DVD preset you want to use; it will show up in the custom presets in Compressor. Clcik on the new custom preset so it will show in the Inspector window and make any needed adjustments. Give it a name you'll remember then save it and apply it to the file you want to encode.
You can use one of the available online bit rate calculators to determine the best bit rate based on your program's duration: http://www.google.com/search?client=opera&rls=en&q=dvd+bit+rate+calculator&sourc eid=opera&ie=utf-8&oe=utf-8
-DH

Compressor Settings for 25 minute DVD

Source Video is HD Video from AVCHD camcorder. What settings should be used for creating a Standard DVD Video (I'm looking for an SD DVD Setting here). I see the 90 minute preset and the 120 minute preset....but can/should I be doing something different since the movies are so small?
Thanks,

Use the 90 minute preset but if you're using FCS3 with compressor 3.5, be prepared for lousy downconversion from HDV to SD. Look at this thread before you get frustrated again.
http://discussions.apple.com/thread.jspa?threadID=2109359&tstart=25
Steve

Playstation 3 compressor settings for h.264/mp4 and avchd and 5.1 audio

Hello this is my first post on this forum. I am a cameraman by trade, but do a lot of editing. I am pretty good on an Avid and with color correction software, but since I sold my sony f900 and picked up a couple or RED cameras - I was forced to hop on the FCP studio2 wagon. So I apologize for the newbie questions.
I have a PS3 and not a PSP. I find more and more clients have a PS3 for their media and blu-ray... etc. So my question is what are the settings for compressor to encode for the PS3 and there ever so nit picky and poorly documented parameters.
There are plenty of non-pro answers, but I have searched high and low for what they need specifically. I see lots of questions but now answers.
So how can I take my final cut footage or any video file for that matter, and put it into something that my PS3 can chew? What are the H.264 (mpeg4) settings?
Can I also (but not exclusively) encode in AVCHD from compressor?
Lastly is there a way to put on the 5.1 or surround info into these files for PS3 playback? if I want to take one of my work DVD's (reel, projects, etc) and put it on the PS3 or bring in surround encoded (5.1, 6.1, 7.1) tracks into FCP and put it with my footage?
Thanks for any and all help...
the only vaguely technical info I have found was on the PS3 forum, here is what it says:
from:
http://boardsus.playstation.com/playstation/board/message?board.id=ps3media&mess age.id=22987&query.id=96226#M22987
For those of you who want to put .MP4 videos on a PS3 with a Macintosh, this is how you do it with ffmpegx.
VIDEO
- X264 Encoding
- framesize can be any
- framerate can be any
AUDIO
- any MP3 or AAC track
OPTIONS
- Use CABAC on
- Constant bitrate on
- Trellis on
- Decode with Quicktime (not always necessary but if your picture is out of sync with audio, try this)
- AVC level 3.0
This produces a good .MP4 file that the PS3 will happily play.
Can anyone help or point me in the right direction? if not can we figure it out on this thread? there are a lot of questions I find when I google this subject out there - so a lot of people would be happy to find the answer.
Olias Sunhillow

I have created files to play on PS3, and the secret is to use MPEG Streamclip. You can encode to whatever you want in MPEG2 or MPEG4, then open that bad boy in MPEG Streamclip:
If it's MPEG2, File > convert to TS
If it's MPEG4: File > Save As MP4
That's it. MPEG Streamclip doesn't re-encode so no quality loss. All it does is change the container. And PS3 is very picky about containers.
As for 5.1 audio, you can do this by encoding separate MPEG2 video and AC3 audio files like you normally would for a DVD. For hi-def MPEG2, use one of the Compressor presets for HD-DVD. Make sure they both have the same name ("xxx.m2v" and "xxx.ac3", for instance) and are in the same folder. Then open the video in MPEG Streamclip and it will automatically mux the streams together, which can then be converted to TS.
Note that this is only possible encoding video to MPEG2. I don't know of any way to create an MP4 with 5.1 audio.
PS3 is a great way to deliver HD video onto your TV without the frustration of trying to author Blu-Ray or even burning discs.

Best compressor settings for HDV downconvert -- attention hanumang

Reposting this bit because it differs significantly from topic of thread where it appeared.
goal: the best possible HDV-DV downconvert using final cut studio (hitch: I have added problem of converting resulting film from PAL to NTSC)
previous method: the best luck I've had is Quicktime converting from HDV to 10-bit PAL SD and compressor converting that to NTSC DVDPRO50
Hanumang recommended using compressor for first conversion. My response:
What settings?
By coincidence I decided to try the initial conversion (HDV to 10-bit) this morning on compressor (but I didn't change the frame rate; i didn't know they were relavant for HD downconvert; I only change them for the PAL-NTSC conversion).
At first glance, the compressor 10-bit conversion doesn't seem any better than the quicktime conversion (due to the frame rate settings?). I don't know for sure because I haven't sent it back to compressor for PAL-NTSC conversion and on to DVD SP.
One issue I'm worried about is the dimensions. quicktime's 768 x 576 (preserve aspect ratio checked; letterbox selected) was the only dimension setting that produced a film that looked right (on the dvd; it's squished in final cut). I don't see that option in compressor. I suppose I could type it in the frame size boxes.
I would be most grateful for help in this matter. I've spent a few weeks on this. I just plod along, zombie-like, trying a few different things every day, hoping to hit the jackpot eventually. I've been planning on trying to downconvert using my HDV/DV deck (print to tape in HDV; then change settings to downconvert and capture as DV). Would that help?
how do pro studios handle downconverting? What kind of hardware do they use? I'm an independent filmmaker, working on a small budget, but eventually, once the film is finished and (hopefully) I have more money, I''d happily pay for a good pro conversion. Do you know what that costs? The film will be 80 minutes long.
thanks again for your help.
What compressor settings do you recommend?
The best workflow I've come up with is qucktime conversion from HDV PAL to SD 10-bit PAL, then compressor conversion from 10-bit Pal to DVDPR0 50 NTSC.
By coincidence I decided to try the initial conversion (HDV to 10-bit) this morning on compressor (but I didn't change the frame rate; i didn't know they were relavant for HD downconvert; I only been change them for the PAL-NTSC conversion).
At first glance, the compressor 10-bit conversion doesn't look better than the quicktime conversion (due to the frame rate settings?). I don't know for sure because I haven't sent it back to compressor for PAL-NTSC conversion and on to DVD SP.
One issue I'm worried about is the dimensions. quicktime's 768 x 576 (preserve aspect ratio checked; letterbox selected) was the only dimension setting that produced a film that looked right (on the dvd; it's squished in final cut). I don't see that option in compressor. I suppose I could type it in the frame size boxes.
Anyway, I would be most grateful for answers to these questions. I've spent a few weeks on this and am past the point of frustration. I just plod along, zombie-like, trying a few different things every day, dimly hoping to hit the jackpot eventually. Actually, I've been planning on trying to downconvert using my HDV/DV deck (print to tape in HDV; then change settings to downconvert and capture as DV). Would that help?
how do pro studios handle downconverting? What kind of hardware do they use? I'm an independent filmmaker, working on a small budget for the time being, but eventually, once the film is over and (hopefully) I have more money, I'll be willing to pay for a good pro conversion. Do you know what that costs? The film will be 80 minutes long.
thanks again for your help.

My bad, I was out in the afternoon and didn't get a chance to pick up on your reply to the last thread. Sorry to hear that your first attempt with Compressor was so disappointing.
Just so we're clear, you're using what exact versions of the software? FCP 5.1? Compressor 2? (For Compressor, in particular, 2.0 vs 2.1 vs 2.3 is important.) And, what are your sequence settings in FCP? Finally, we're to understand that you're actually working in PAL HDV? Or are you working in AIC?

Best export settings for HD video to DVD

hello, I now use premier pro cs5, from cs4 on my mac, love it, but I shoot with a cannon XL H1s HD video, my questiion is when viewing video from camera or on the screen in cs5, perfect hd picture, but when I export to DVD, i see in the media encoder if I choose mpeg2-DVD it goes output to 720x480, how do I export to dvd for the best HD seetings for DVD to get a HD playback on the DVD, now I see an OK video on the TV playback, but not the same as the original recording, can anyone help,, thanks in advance for any help.....

I found (via a friend who is experienced in Pr & En) that it all comes down to the export/authoring settings.
In Pr, my export settings needed to be adjusted as follows:
Format: MPEG2-DVD
Preset: PAL Progressive Widescreen High Quality
Selected 'DVD' in the Basic Settings section of the
Multiplexer tab (this creates a single mpeg file rather than a m2v file which has a separate video and audio file)
Selected the highest possible quality (5) in the Basic Video Settings section of the Video tab, changed the TV Standard to PAL (to suit Australian TVs) and then
Set the minimum/target/maximum bitrate settings to 8Mbps (when I set it at 9Mbps, the final file had too high a bitrate for DVD)
In the Audio tab, I selected PCM as the audio type.
I also ensured that the Use Maximum Render Quality checkbox was ticked at the bottom of the export settings window.
Then I exported.
Once encoding was complete I opened Encore, started a new project, selected DVD as the authoring mode and PAL as the Television Standard within the Basic settings for the new project. I then imported the final mpeg file as a timeline into Encore, set all the appropriate first play/title button/end play functions as necessary, then I opened the Edit Quality Presets window from the File menu and made the following settings;
Format: MPEG2-DVD
Presets: PAL DV High quality 8Mb CBR 1 Pass
Basic Video Settings - Quality: set to maximum (5)
Basic Video Settings - Field Order: None (Progressive)
Basic Video Settings - Pixel Aspect Ratio: Widescreen 16:9
Basic Video Settings - Bitrate Settings - Bitrate [Mbps]: set to maximum (9)
Basic Audio Settings - Audio Format Settings: Audio Format: PCM
click OK
Then I authored the DVD and was quite pleased with the result. Still not quite to the quality I was hoping for (i.e. the quality of a DVD movie), but still a significant improvement on my initial attempts using default Pr & En settings.
Hope it helps

Compressor settings for All Region SD DVD?

Similar Messages

Maybe you are looking for