Compressor settings for Dialog Norm. and others?

Using Comp 3.0.2 - just trying to make a MPEG 2 out of an Uncompressed 8-bit seq from FCP 6.0.2
What's best settings in Compressor for good audio? Going to SD DVD through DVD SP 4. Do I choose Dolby Digital Professional or MPEG2 for File format, under preprocessing do I choose NONE, under AUDIO target system do I want DVD Video, 48 KHz, 2/0, 224 kbps, Bit stream mode = Complete main? and especially dialogue Normalization do I want -27 or -31? Thanks very much
kB

Hi,
Choose best quality 90 minutes (drag and drop the folder with MPEG2 and ac3 audio presets).
Compression preset NONE, dialogue normalization -31db, Audio: Complete main at 48Khz 128 kbs.
Cheers,
G.

Similar Messages

Best Compressor settings for HD720 16:9 to cell phone OTHER than iPhone?

Hey there,
Does anyone know a good set of compressor settings for exporting HD720 16:9 29.97fps to a cell phone compatible format other than iPhone? Do most cell phones use an MPEG format? I guess I should start there. New to this one.
Thank you,
ed

There are different MPEG flavours and compression for DVD, mobiles or web often means creating some flavour of MPEG file. Even H.264 is an MPEG file. One of the most advanced.
Go to Compressor settings and look for a folder named Mobile devices then do a bit of your DIY (test, test, test).
G.

FCPX Export Compressor Settings QT Error -2045 and more...

I have a 56 minute FCPX project that won't export. I've tried standard h264 and using Compressor settings for HD 720 for YouTube / Video.
Most recent error is QuickTime Error -2045 - can't find this error documented anywhere.
My console log last recorded for FCP this error:
12/8/11 11:39:26.447 AM [0x0-0x1ff1ff].com.apple.FinalCut: Exception raised cleaning up media server process System Error = 3 {No such process}IPC Server did not respond to message, Server process is gone
Other notable log entries include:
12/8/11 10:05:05.614 AM [0x0-0x268268].com.apple.FinalCut: objc[18251]: Class CMIOGraphService is implemented in both /System/Library/Frameworks/CoreMediaIO.framework/Versions/A/CoreMediaIO and /Applications/Final Cut Pro.app/Contents/Frameworks/CoreMediaLion/CoreMediaIO.framework/Versions/Curren t/CoreMediaIO. One of the two will be used. Which one is undefined.
12/8/11 10:06:05.139 AM [0x0-0x268268].com.apple.FinalCut: Parse error (15) No data found at file://localhost/Users/allan/Movies/Motion%20Templates.localized/Transitions.lo calized/MotionVFX/Project_543_Transition_mFlare.motr on line 1, character 1
(note that there are files in this directory and the transition works in preview in FCPX)
12/8/11 10:06:05.139 AM [0x0-0x268268].com.apple.FinalCut: <CFURL 0x142893fd0 [0x7fff7b0d9f40]>{type = 15, string = file://localhost/Users/allan/Movies/Motion%20Templates.localiz
12/8/11 10:06:05.140 AM [0x0-0x268268].com.apple.FinalCut: ed/Transitions.localized/MotionVFX/Project_543_Transition_mFlare.motr, encoding = 134217984, base = (null)}
12/8/11 11:39:23.402 AM com.apple.launchd.peruser.501: ([0x0-0x268268].com.apple.FinalCut[18251]) Job appears to have crashed: Segmentation fault: 11
This is interesting:
12/8/11 1:59:24.133 AM [0x0-0x1d41d4].com.apple.FinalCut: fgetln, Codec32BitTool errno 22
Now prior to this last (4th attempt) at exporting I was getting this error:
12/8/11 1:21:39.618 AM Final Cut Pro: [01:21:39.618] <<<< VTVideoDecoderSelection >>>> VTSelectAndCreateVideoDecoderInstanceInternal: no video decoder found for 'XVID'
I found a decoder online but perhaps it's 32bit... however, this is just the last time; prior I was getting the no decoder error
1) What is -2045 error
2) What is the proper decoder to use for XVID
3) I do get a warning that there is missing media, effects, titles or generators - and I can see the inspector tell me that these are related to motionVFX Project 543 (see error above) but I can't find any instance of these effects not implemented. So, how can you quickly find any missing media (redzone) or other in a FCPX project without scrolling or playing through it. If something is missing I would expect that I should be able to quickly have my playhead jump to the missing media segment within my project. But I can't figure out how.
4) I need to deliver this project and can't get a suitable export and I'm on deadline, so any thoughts are appreciated. My ideal output is a file to load to Vimeo; secondly a good quality Quicktime movie would be nice. The file is about 50GB (my guess) I need less than 5GB and 720p HD
Thanks

From Crash Analyzer:
-2045 (QuickTime)
This error occurs when a file fails to write properly.
Suggested Actions
* If you were saving to a network drive, try saving to a local drive instead.
* If this occurs when exporting from Final Cut Pro, it can sometimes be caused by rogue plugins. Use Plugin Manager to disable third-party codecs for Final Cut Pro.
More Information
System description for error -2045: Data already closed
Report generated by Crash Analyzer in Pro Maintenance Tools
I would also recommend converting your Xvid files to ProRes before bringing them into FCPX.

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Why do I not have access to all the features of my Canon MG5320 printer in all applications which use a printer? The printer has two paper paths. The rear path is used for photo paper and other specialty papers. this is only one "unavailable".

I have an iMac late 2012 with OSX 10.8.
The MG5320 has two paper feed paths; one at the rear for photo paper, brochure paper, and other specialty papers and a tray for regular 8½x11 paper. It also can print on CDs and DVDs and has an automatic duplexer. Canon provides a utility for printing on the CDs and DVDs and also for printing photos and other specialty items. This is available in Mac format also. I installed the most recent drivers and utilities.
I also have a HP IBM Compatible computer on which the above printer as well as an Epson are installed. Every option of each printer is available in every software application that has need for a printer.
The Mac printer dialog varies from one application to another. The only applications that list the option for selecting paper quality which includes photo paper are Office for Mac, Pages, and Numbers. Not likely that I would be using any of these for photo printing. Auto duplexing, however, is not available here or in any other applications.
The print dialog in Aperture, Photoshop Elements for Mac, ACDSee for Mac, or iPhoto provide the choice of numerous sizes of paper but no option for paper quality. Therefore, I attempted to use the print utility supplied by Canon and updated by Apple for printing some photos. The photos are selected in this utility. When the print command was given I was shown a message that the printer was being reset. It then began printing a spreadsheet, which was not even open, from the front tray on regular paper in fast draft quality.
It is essential that the rear feed be available for printing photos. The printer will not accept photo paper from the front tray. The greater proportion of my printing is photos or other specialty items all of which use paper that must be fed from the rear feed.
An acquaintence who considers himself to be somewhat of a Mac expert insists that the printer options that I require are available and all I need to do is look for them. The print dialog should be clear enough that "looking for options" is not a necessity. Even so, I have dilligently searched every variation of the Mac print dialog on my iMac and only the office type applications named above included anything other than the basic printer functions.
I have also searched numerous locations online without finding a solution. I did, however, find that printing and printing problems seem to be common with several versions of the Mac OS and Mac computers in general.
I would appreciate it if someone could provide me with a solution. I have no desire to upgrade my Windows OS to Windows 8 which is perhaps suitable for "smart" phones but not desktop computers. However, because of the printing issue I have temporarily put my iMac aside and reverted to using my PC with Windows Vista.
Help!!

This is a user forum I feel you need to deal with Adobe customer services or support chat did not work in you case.

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

Strange info in "Bypass Proxy Settings for These Hosts and Domains"

For my Mac Mini my Network IP Address always has a self-assigned 169.254 number that I cannot change. Strangely, this same IP number is similar to info that is in the Proxies section (of Network Settings) under "Bypass Proxy Settings for These Hosts and Domains".
No matter what I do, this info (*,local, 169.254/16) appears in my Network Settings in the Proxies section under "Bypass Proxy Settings for These Hosts and Domains". (I tried removing the info and it would cause the "Configure Proxies" selection to default to "Always Use PAC File". Had to go back and retrash all the plist files to have Proxies go back to "Configure Proxies-Manually". Still, the info (*,local, 169.254/16) continues to appear in the "Bypass Proxy Settings for These Hosts and Domains" section and my IP address is always a 169.254 number.)
Comcast cable modem via direct hardwired Ethernet works fine with my other computer, so not the modem. Also, other computer does not have any info in the "Bypass Proxy Settings for These Hosts and Domains" section.
Installed a fresh copy of OS X 11.5 on a new hard drive. Still the same problem.
I posted this issue before but only got one responder and the problem still exists. Any clues? Somebody must know about this stuff. Help please.
Thanks

When your Mac wakes up, it does not yet have an IP Addresss. It wants to send a request to a Router for an apprpriste IP address to use now. But it needs to have an IP address (like a return address) to receive any messages. So, ... wait for it,
... it (your Mac) makes one up. There are rules that ensure it is a random address, but they always start with 169.254. It is on the same subnet with any low-order 16 bits This is the "self-assigned" range of IP Addresses. This address is only good for talking on a local network segment, for things like asking for a valid IP Address from a DHCP-enabled Router.
In most cases, on most networks, the 169.254 self-assigned IP Address is replaced by a valid Local IP Address such as 192.168.xxx yyy or 10.0.xxx.yyy so quickly that you never even see the 169.254 Address.
If you do see the 169.254 Address, it can be read as "Nobody will talk to me" or "Nobody will give me an IP Address". When you have this IP Address for more than an instant, you should suspect bad cables for Ethernet connections, bad signal strength or interference for wireless, Router configuration problems, or Mac configuration problems.
Mac configuration problems are often solved by using the "Assist Me" button is System Preferences > Network and choosing to set up again.
Another diagnostic is to try using Network Utility and the Ping function, and Ping-ing the address of your Airport base Station, often 192.168.0.1 or 10.0.0.1 or similar. This will tell you if the Router is reachable, or there are cabling/wirelss signal problems.
In this case, proxies are not an issue, and are simply a distraction from the real problems.

"current encoder settings for bit rate and sample rate are invalid" message

I have some files I am working with. Details and what happened:
Had some music files where I was doing some trimming/splitting. Files worked fine in itunes.
Open the files in Quicktime Pro 7 to trim them. Exported to aif.
Opened the files with itunes. They open and play just fine.
In Itunes I click"create AAC version" to convert them.
I receive the message "An error occurred while trying to import the file. The current encoder settings for bit rate and sample rate are not valid for this file."
I don't know what to do from here. Suggestions?
Thanks.

Make sure that the AIFFs that you export are set for 16 bit PCM.
Also, assuming that you are using 44.1 kHZ sampling in your AIFFs, make sure that you are not trying to use 48 kHz in the AAC.

Making system settings for measurement documents and measuring point

What is the significance of making system settings for measurement documents and measuring point in spro?
Edited by: Pallavi Kakoti on Jul 14, 2011 1:23 PM

Hi,
<< Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
Regrds
Jitender
Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

Why can I sometimes paste text into a revision history dialog box and other times cannot?

Why can I sometimes paste copied text (from another VI's revision history, for instance or from anywhere else) into a revision history dialog box and other times cannot? All versions of LabVIEW! It's something like the control key becomes diabled. I've noticed the same thing when saving many VI's at once, some will let you paste into revision history and others will not. Aren't all VI's created equally when it comes to revision history? All versions of LabVIEW since 3 have plagued me with this problem.

Hello,
If you'd like to add text to the revision history of a VI, you can
paste into the Comment box and add all of your text at once. The
history itself can be read from this window, but cannot be directly
edited. The History field is read-only in the dialog box.
If you feel this should not be the case, your best course of action is
to express your desire for added functionality to our developers on the Product Feedback page of our website.
Message Edited by MattP on 12-19-2006 12:04 PM
Cheers,
Matt Pollock
National Instruments

Size settings for swing components and resizing of a JFrame

Hi all!
I'd have the following question:
There is a JFrame, which content panel has the GridBagLayout. In some places on that layout's grid there are JScrollPanels (let's name each as "inner panel") with JTables in the view ports.
When user resizes the main JFrame, I'd like that all inner panels and corresponding tables would resize synchronously: if user enlarges the main JFrame, then the sizes of all those components should increase proportionally, when user makes the main JFrame smaller, then all the sizes should become proportionally less.
I am confused with the settings for max, min and preffered sizes for inner panels as well as for their JTables. I have read about those size attributes and tried to play with them, but I can't obtain the needed result :-/
Each inner panel has the "BOTH" value for the fill attribute in the GridBagLayout's constraints.
Might someone help me?
Thanks in advance!

Hmm...
The JPanel that contains all stuff is the JFrame's content pane...
The entire JFrame's content pane contains another panels (JScrollPanels), which are all set to fill all available space on the parent panel (JFrame's content pane) with "both" value of the "fill" attribute.
Should I put the only one JPanel on the JFrame's content pane and all other stuff at that additional JPanel...?

TS1717 when trying to import cd the following message appears "the current encoder settings for bit rate and sample rate are not valid for this file"?

Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file". Any suggestions?

Thanks so very much. I chose MP3 and Download and it is working beautifully. Have a wonderful day and it is so nice of you to get right back to me. I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install. Could hug you!

Settings for Item Proposal and Product Proposal

Hi Gurus,
How to do the configuration settings for Item Proposal and Product Proposal.
I also want to know what is the difference between Item Proposal and product Proposal.
Give me your Solution.

Item proposal is the list of regularly/frequently ordered items of a particular customer. this will be useful when u are entering the sales order. it will be used to speed up the order entry process.
For that Goto VA51, enter item proposal type as MS and sales area details.
enter the customer name and the list of products and save. Assign the item proposal No in the customer master sales area data, sales tab.
create the sales order and enter the customer no and press the propose items button in the sales order.
the system will propose one box and it will display all the materials. then u can continue further.
Product proposal:
To configure product proposal, Go to IMG,SD, Basic functions, Dynamic product proposal, Maintain all the settings
**A product proposal is a list of products for a specific customer that is automatically proposed during sales document processing. You can decide for yourself which materials should be displayed as product proposals in the sales document. You can also determine the sequence in which the materials appear in the product proposal.
During sales document processing, the system displays a product proposal in the item overview according to the customer and the business transaction. It displays the material number, material description, and historical order quantites in the sales unit last used. To use a material again, you just have to copy it. The system does not run the standard checks (pricing, availability, incompletion, material determination, free goods determination and so on) until you have entered the order quantities.
The product proposal is both an entry help and an aid to sales support and promotions. It is particularly useful in Telesales, where the employee automatically receives a display of all the materials that are of interest to a particular customer. This helps them to provide appropriate advice to the customer quickly and easily. The sales document history enables you to analyse the purchasing behaviour of a customer and recognize early on if it changes, for instance, when the customer suddenly stops ordering a product.
The product proposal differs to cross-selling in that it is dependent on the customer and sales area, and is displayed in the sales document as soon as you have entered a customer. Cross-selling, on the other hand, is triggered by a material. In other words, the system proposes cross-selling materials according to the material or a characteristic of the material you have entered.
You can determine the product proposal from different data sources:
Order history
Listed materials
Excluded materials
Item proposal
Customer-material info records
Customer-specific data sources
You can combine materials from these data sources to create a product proposal. The system then accesses the data sources either online or in the background.
To define a product proposal for sales document processing, you must carry out the following activities in Customizing:
Define customer procedure for product proposal
Define document procedure for product proposal
Assign document procedure for product proposal to order types
Maintain table of origin for product proposal
Define product proposal procedure and determine access sequences
Maintain procedure determination (in background) for product proposal
Maintain procedure determination (online) for product proposal
The product proposal procedure determines how the system displays the product proposal in the sales document. For instance, if the system has accessed the order history, it determines how many columns should be displayed in the sales document, in which period intervals thehistoric order quantities should be displayed (for instance, day, week, or month), and most importantly, the sequence in which the system should access the data sources (for example, order history, listing, exclusion).
The product proposal procedure depends on the:
Customer determination procedure
The customer procedure determines which product proposal procedure the system automatically uses when you create a sales document for a particular customer.
It is specified in the customer master record per sales area.
Document determination procedure
The document procedure determines which product proposal procedure the system automatically uses for a certain document type. The document procedure is stored as a key in the header for the sales document type.
If you use online processing, the product proposal procedure is determined according to the customer and document determination procedures.
If you use background processing, the product proposal procedure is determined according to the sales area in the customer master and the customer determination procedure. It does not use the document determination procedure because the document type is not recognized in background processing.
Difference:
Item proposal is the list of products the customer used to buy frequently.
Product proposal is also the list of products but it will explode in the sales order, once u enter the sold to party field. But this will be based on the following criterias.
Order history
Listed materials
Excluded materials
Item proposal
Customer-material info records
Customer-specific data sources
Hope this clarifies.
Reward points if useful

Settings for non-modvatable and modvatable taxes in img

HI gurus,
What are the settings for non-modvatable and modvatable taxes in img, and where shall we do them
Ur reply is appreciable
Pls send the ans asap
Thanks in adv
sri

Greetings Martin,
The default value for Maximum Time in Queue is 259200 sec OR 3 days. We'd recommend increasing this threshold to 345,600 seconds (four days) or 432,000 (five days) if necessary.
Please remember changing this value will not affect existing queued messages. The drop dead point in time is attached once and resides with the message for it's life.
Regards,
Viquar Ahmed
Customer Support Engineer

Hi, Thunderbird just done an update on my computer but now in e mails iv`e lost all my folders I had, For example I had a folder for my receits and other thing

Thunderbird just done an update on my computer but now in e mails iv`e lost all my folders I had, For example I had a folder for my receits and other e mails I wanted to keep.

can you provide a bit more info before you do anything.
I'm presuming this is a pop mail account - please confirm.
First, make sure hidden files and folders are visible:
The AppData folder is folder is a hidden folder; to show hidden folders, open a Windows Explorer window and choose "Organize → Folder and Search Options → Folder Options → View (tab) → Show hidden files and folders".
* Help > Troubleshooting Information
* click on 'show folder' button
* click on 'Mail' folder.
* Please post image of the contents of the 'Mail' folder.
In thunderbird:
* right click on mail account name and select 'Settings'
* Select 'Server Settings' for the mail account
* Look bottom right for 'Local directory'.
* Put mouse cursor in the text box, then use keyboard arrow keys to navigate to the far right..some of the directory will be hidden as it does not fit it all in, so keep going to the right until you reach the end.
* Then left click, hold down and move mouse to the left to highlight the entire entry.
* Right click on highlighted area and select Copy.
* Paste info into this question in the forum.

Compressor settings for Dialog Norm. and others?

Similar Messages

Maybe you are looking for