Compressor slow down after DVDSP/quicktime update

I am producing DVDs every week between 1 to 1.5 hours long. Usually takes compressor from 2 to 4 hours to render.
After upgrading to DVDSP 4.1.2 and Quicktime 7.1.5 it has been 4 hours and the redering is just over half done.
Activity monitor is showing 98.70, using about 1/2 of both processors.
Anyone else having a slow down using compressor?
Power Mac Dual 1.4 Mac OS X (10.4.8) 2GB Ram, SATA RAID drives

I am having the same issue. My G5 Quad would rev the fans going no matter what i was encoding. QT to WMV, QT to iPod, Compressor encoding SD or HD or QT file. Compressor used to fly for me. This wasn't the case on my G5 dual 2 but I thought it was because I didn't have as much RAM. Now I upgraded to the UB version of FCP and it's as slow as molasses in wintertime.

Similar Messages

Why does my MacBook Air's shutting down slow down after the recent update?

After the newly update OS X Update 10.9.4, the shut down of my MacBook Air slows down. It will stay several seconds more than before the update. This happens every time I try to shut down my MacBook, please meet my problem.

A Safe Mode boot deletes some system caches that may help.
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
Once your Mac has booted to the desktop, click Shut Down from the Apple () menu to test.

Airport slows down after the latest update !

I have a ibook running the latest version of the masOs . After doing a automatic software update ( if I recollect it did a MacOs and Airport update - the computer has slowed down and access the wireless networks with great difficulty ! How do we resolve this problem or go back to the earlier version ?

What kind of difficulty accessing wireless networks?
I've experienced no such problems.
Did you quit all running applications before installing the 10.4.6 update? I always quit all running applications before installing any OS, Software or Security updates.
Before installing a major OS Update such as 10.4.6, I always check my hard drive for any directory problems with Disk First Aid repair via Disk Utility when booted from my Tiger install disc.
As a first step, I suggest Resolving Disk, Permission, and Cache Corruption for system troubleshooting procedures and when doing so, follow all steps/instructions in the order provided.
To revert to an earlier 10.4 x version such as 10.4.5 will require re-installing 10.4 via your 10.4 install package (archive & install selecting preserve user and network settings) and then update to the chosen version only.

Compleat system slow down after current updates

Has anyone learned why we all seem to have a compleat system slow down after the current set of updates? Everything works, but is VERY slow to respond. Even iTunes 7.1.1 plays video choppy now. Audio track plays fine however. Odd.
-Apple //GS

First of all, try repairing your permissions with Applications> Utilities> Disk Utility. Select the hard drive you're running off of and then click the Repair Permissions button.
If that doesn't work I'd do an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
Then run the combo update(s) instead of the consecutive ones. That seems to be working for a lot of people, but it will probably take a while.

System slow down after lion update 8/18/11

Has anyone else had a problem with their system slowing down after downloading the system update for Lion on 8/18? My system is not nearly as responsive and is only about two weeks old and have not installed any software other than Microsoft Office 2011 when I bought the machine. Any ideas?

Ok my system is booting and shutting down faster now.. This method worked for me:
First, I repaired the permissions:
1) Open up Disk Utility
2) Select your hard drive
3) Now select Repair Disk Permissions.
Then, I deleted the caches folder:
1) From the Finder's Go menu, select Go To Folder, and go to this folder: /Library
2) Delete everything inside the Caches folder (This might require the Admin Username & Password)
Finally, go to System Preferences and click on Startup Disc then click on your boot drive (In my case I've selected my HD labeled "Macintosh HD Mac OS X, 10.7.1". Now do a restart by clicking on the Restart button. If you don't have a Startup drive selected your mac will waste time at boot searching for a suitable boot drive !
I Hope this works for you as well.
Cheers!

System Slow-Down After Printing

I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

System slow down after upgrade to 10.10.2

Still have a slow down after updating to 10.10.2
Tried everything I can think of.
Get spinning color wheel for a long time when opening even small files. Scrolling through folders, cursor hangs for a moment. opening and saving takes much longer.
Used HD repair and repaired permissions and diagnosed HD. No problems.
Looking at Activity Monitor, I don't see anything that stand out-
-C

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Windows 8.1 gradually slows down after hours. Speed returns normal if restart "explorer.exe".

I have Windows 8.1 Pro (x64) installed on Alienware M17x. The slowdown mostly appears as slow response in the situation such as open a folder/window, open/close/switch tabs in IE, drag window, and there's also cursor lag. It gradually
slows down after system boot, noticeable after 3-4 hours, really slow after 8-9 hours.
I have thought about many possible processes which can cause this issue, and then I found out that it's caused by "explorer.exe". If I kill "explorer.exe", the speed suddenly becomes normal. Then, I restart explorer.exe
again, it stays normal, and then it still gradually slows down again after hours.
I have checked driver or software compatibility. Also, CPU usage and Disk usage is normal.
Please give some advises, reasoning, or solutions.

SaccoSVD
The process that is causing the problem is called sidebar.exe and I am curious why it is running on a win 8 machine as I dont believe it is built in. (It seems to have over 22,000 instances launched so I suspect either malware or a broken app)
It is usually associated with a Vista machine, or updated win 7 machine. Did you do do a clean install? Have you run a malwarebytes scan?
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Wanikiya and Dyami--Team Zigzag

Why do my loops slow down after many iterations

My Vi seems to freeze up or slow down after several iterations of the loop. This is an Analog Input Capture VI.
Attachments:
Final_Main_VI_with_working_amp.vi ‏456 KB

First of all, thank you for your contribution. You are right to say that I have no need in changing the AI Config every time that the loop runs. But as this is supposed to be a soft-scope, I need to be able to update the parameters associated with AI Start while the loop is running (e.g. trigger level).
I have tried to move the AI Config subVI out of both loops but the error as a result is: "No transfer in progress for the specified source."
I also need a sampling rate of exactly 96kHz. I realize that the laptop clock cannot attain this value. Do you know how I could get exactly 96kHz.
Attachments:
Final_Main_VI_with_working_amp.vi ‏498 KB

Adobe slowed down after running fine on a Mac Book Pro Photoshop settings have been reset

adobe slowed down after running fine on a Mac Book Pro.   Adobe Settings have been Reset

Hello Gener7,
     I did try everything on the FAQ page (all steps) I also did them a few more times with "Adobe help" walking me through 2 more times. I just don't get it, I have been on with Adobe on some days up to 5 hours at a time for over a month now. I think it must be something with the installation disc but they say no, no, switchboard is just not working on my OS X 10.9.4. I even took the computer into the apple store here and had them look it over, reinstall everything and they say it's the Adobe software.
     Thank you very much for your help, it's nice to know someone is reading this :-) I do work around this by saving the files and reopening them in the next program I need but everyone in class is always waiting on me, (it sucks) and I just think it should work. Hope you have a good day and I will put an update on here if this is ever figured out.
Thanks one more time :-)

Slow down after installing Lion OS

My Macbook pro later than 2009 model slowed down after installing the new OS Lion
any suggestions to speed it up

First suggestion ,there have been a number of identical user questions like yours, in the Lion Community. If you want to talk to other MacBook Pro owners, try the forum they have.
http://www.apple.com/support/macbookpro
What you do not need is some gizmo to "speed up" or clean caches etc.
Maybe you need to make more room on your hard drive, or add more RAM.
For now, hold down Command-R and run Disk Utility to check the health of your system drive (Lion Recovery Mode)
http://www.apple.com/support/lion

After recent QuickTime updates fcp and QuickTime will not open .mov files captured on my FS-H200. Iran

After recent QuickTime updates fcp and QuickTime will not open .mov files captured on my FS-H200. I put this onthe quick time thread and they sent me here.

and NEVER do a software update unless you've got a clone of your startup drive so you can restore your system to it's working state if something goes wrong.
https://discussions.apple.com/docs/DOC-2494

Has anyone noticed MacBook Air slowing down after installing Maverick

Has anyone noticed MacBook Air slowing down after installing Maverick?

Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

Lightroom workflow slows down after modifying an image

Hi fellow users,
Lightroom 4.3 runs smoothly if I work on unmodified images.
However, if I apply modifications on an image, retouching it afterwards becomes much slower, even if I render a preview AFTER I made modifications on the image.
I tell you an example: I import a raw file to the program and I render it`s preview. Then I retouch the image - it works very fast, no waiting time, no Loading overlay.
Where the problem starts: I import a raw file, I apply some modifications on it (for example a preset), then I render it`s preview - then I want to do more modifications on the image, which becomes very slow.
I was monitoring the cpu usage of the computer. In the first case, the cpu usage during modifying the image is normal.
In the second case, it goes up to 100%.
It seems that applying modifications on an image makes working on it slow, no matter if you have the most up-to-date preview or not.
Anyone knows if it is normal or not?
Is there any solution to this?
Thanks,
Tamas
My configuration:
Windows 7 64 bit (up to date)
Lightroom 4.3 64 bit
Fast PC
lightroom settings:
camera raw cache: 20gb
video cache: 10gb

First of all, you can forget about the preview rendering, that's irrelevant. Previews are only used by the Library module, not the Develop module. In Develop, it's handled by the ACR cache.
Now, as for slowing down after initial adjustments, that's a variable I haven't looked out for. But it could well be correct (it would explain some weird results I got across two machines recently).
In general, Lightroom 4 performs well below expected standards on some systems, while others fly along, and it seems nobody can explain why. Long story, do a search on this forum and you'll come up with several lengthy threads. The problem is that there are so many variables in this that it's almost impossible to even define what "slow" means. And now you've added another (interesting) one...

Illustrator begins to slow down after 10 to 15 minutes

Illustrator begins to slow down after 10 to 15 minutes, my system exceeds the minimum requirements. What gives?
Xeon Processor 3ghz
20gigs of ram
Win7 64bit
200gigs of storage

Sorry I forgot to mention that it's the Creative Cloud version.

Compressor slow down after DVDSP/quicktime update

Similar Messages

Maybe you are looking for