Compressor Update Access Error

The latest update for compressor shows up in my Software Updates, but when I give it permission to install, I get the message "You do not have sufficient permission to access, update has been moved to the trash".
There is no other user with higher access on my computer. I have repaired disc permissions, and it keeps happening. What permission does it need?

Maybe your user account has been changed automatically to standard?
Apple has an article on how to fix that: Mac OS X 10.5: Administrator user changes to standard
You could also try downloading the update manually from http://www.apple.com/finalcutstudio/download/

Similar Messages

"software update" "An error occurred while checking for updates"

When I click on "Software Update", an error results, "An error occurred while checking for updates". It is definitely connected to the internet. I was gifted a G5 and I installed a new hard drive and loaded the OS, OS X 10.3.5. That version of Safari does not display pages correctly. E.g., support.apple.com/downloads just clocks on the righthand side of the page.
Because cannot access that link, cannot manually update the OS - I was thinking this version is "old" and as a result, unable to connect to apple's update server. Thanks.

Thanks, I upgraded with your info.
Ultimately, I am trying to access mail.google.com but receiving the following error with opera v9.5.x: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
Safari gives the following: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
I can access ask.com and using opera to type this response.

'Data Access Error' while trying to delete period using Table Editor in FDM

Hi,
I'm trying to delete a period that has been entered wrongly using Tools->Table Editor option.
But when I try to 'Update Grid' after deleting the Period,I get 'Data Access Error'.
Could any one let me know how to solve the error.
Thanks in advance

Hi Kelly,
There is no data that is entered in that period.The data will be entered for that period next month.
POV is also not set to that period,but still the problem persists.
Thanks

Potential Windows Update database error detected 0x80070490

This is the response I get when I run the Windows update troubleshooter from the Windows 8.1 Action Center. If I click next it reports the errors have been fixed. However if I run it again it reports exactly the same errors.
After searching the Internet I have found that several users have reported having this issue. As result of the aforementioned search I have tried the following:
1) Run the Fixit tool for Windows 8.1 located at:
http://support.microsoft.com/kb/971058/en-us.
2) Run the System Update Readiness commands: DISM.exe /Online /Cleanup-image /Scanhealth and DISM.exe /Online /Cleanup-image /Restorehealth located at:
http://support.microsoft.com/kb/947821/en-us.
3) Saved contents of C:\Windows\System32\catroot2 to a temp folder and then deleted contents of C:\Windows\System32\catroot2.
4)Renamed C:\Windows\SoftwareDistribution to C:\Windows\SoftwareDistribution.old
5) Restarted Windows 8.1.
6) Verified that C:\Windows\System32\catroot2 and that C:Windows\SoftwareDistribution folders had been rebuilt.
7) I then ran the Windows update troubleshooter from the Window 8.1 Action Center again and got the same response as listed above. The errors still exist and are not fixed.
8) Finally, I downloaded Windows 8.1 Enterprise Evaluation and I did a completely new clean install of Windows 8.1 and without installing anything else (no updates, no software, no antivirus) the above errors appeared within minutes after connecting
to the internet. I checked using the Windows update troubleshooter several times before connecting to the Internet and each time no problems were found, but shortly after I connected the above errors are shown to exists.
Any suggestions that will help fix this issue will be of great help.

Did anyone ever find an actual fix for this problem? I have a very similar problem. I have gone through the same steps for fixing my issues with getting a message of problems found every time I run the Windows Update troubleshooter. It
continually finds what it says are Potential Windows Update Database error detected 0x800700D and says they are fixed, along with another message saying Windows Update components must be repaired and it says they are fixed as well. However, each time
I run the troubleshooter it finds the same issues. I have no problems running Windows Update under Windows 8.1 and them all installing without issue, yet I can't download or update ANY apps within the MS store and like the problem above, when it looks
for my apps it says it's having problems finding them and to try later. If I try to download even a free app, I get an error message that something happened and your purchase can't be completed. Error code: 0x80096004.
I have dug through everything I can find on this error message and tried changing my sign in on my laptop to a local account, created a new MS account to access the store and continue to get the same error message. I have tried it with my Kaspersky
Internet Security 2015 turned completely off. I've also ran SFC scannow and there are no errors and have ran DISM which found a problem but says it was fixed. After running it again, there were no errors. I have no other problems with anything
else (that I know of on my machine). It is an Asus Q400A and came with Windows 8.0. I ran all the updates and then upgraded to 8.1 through the MS store without issue. I have installed all updates since upgrading to 8.1 and have absolutely
no problem running ANY updates, but can't seem to access the store no matter what I try.
If anyone has found a solution to this I'd appreciate your input. Hard to believe MS would put out a product that has such a basic problem that has affected so many users and can't seem to come up with some resolution that doesn't require registry
editing, running commands from elevated command prompts, and a CS degree to resolve--there are soooo many issues online regarding this kind of error and others related to running SFC and DISM...most ending up in their ultimate default answer....renew or reinstall
Windows and all the updates....which still doesn't resolve the problem for many! I've always been a PC guy, but I'm starting to like the MacBook Pro I picked for work related reasons with great hesitation. I've wasted more time chasing this issue
down than I all the time I've spent actually using the Mac without even a hitch!
Thx in advance for any feedback....please no MAC blasting....at this point, it would be not well received!!

0187 EAIA Data access error Lenovo Twist

When the error happend the systemboard was replaced (0187 EAIA Data access error on startup), and the error came back up again. Replaced the systemboard again and the error persists. Can't update eprom serial information because of this error. I currently have about 6 machines doing the same thing, and was wondering if anyone else had experianced this issue?

I get the same error on a brand new Lenovo Thinkpad S540 (+-1 month old). Besides that first issue I'm also getting these errors:
2200: Machine Type and Serial Number are invalid
2201: Machine UUID is invalid
These occur together and only in about one out of every ten boots.
Curious what's wrong here.

Adobe LiveCycle ES4 add new and update Access Database, Non-Null failure

I am using adobe livecycle es4 and I am trying to add a new record and then update it to an Access database. However, when i press update the error tells me that i cannot have Null values and it displays a check box field name. How can i allow a null value for a check box? Because when my form is used, not all of the check boxes will be checked

You can use the resolveNode function that can catch the null value of your check box component.
Exemple:
if (this.resolveNode("NameCheckBox").rawValue == null)
//Do Something

BIB-16613 Database access error occurred while connecting to the OLAP insta

I am trying to connect to the database using the BI Beans sample bootstrap.jpr
I am getting the BIB-16613 error.
oracle.dss.security.BISecurityException: BIB-16613 Database access error occurred while connecting to the OLAP instance.
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
The bi_checkconfig utility gives me:
C:\utils\JDev903\bibeans\bin>bi_checkconfig -h pavelr -po 1521 -sid LOCAL -u BIBDEMO -p BIBDEMO
BI Beans Diagnostics(v1.0.0.0) 17/03/03
===============================================================================
JDEV_ORACLE_HOME ............................. = C:\utils\JDev903
JAVA_HOME .................................... = C:\OraHome1\jdk
JDeveloper version ........................... = 9.0.3.1035 (Production)
BI Beans version ............................. = 9.0.3.4.0
BI Beans internal version .................... = 2.7.0.11.3
Connect to database .......................... = Successful
JDBC driver version .......................... = 9.2.0.1.0
JDBC JAR file location ....................... = C:\utils\JDev903\jdbc\lib
Database version ............................. = 9.2.0.2.1
OLAP Catalog version ......................... = N/A
OLAP AW Engine version ....................... = N/A
OLAP API Server version ...................... = N/A
BI Beans Catalog version ..................... = N/A; not installed in BIBDEMO
OLAP API JAR file version .................... = 9.2
OLAP API JAR file location ................... = C:\utils\JDev903\jdev\lib\ext
Load OLAP API metadata ....................... = Successful
Number of metadata folders ................... = 3
Number of metadata measures .................. = 26
Number of metadata dimensions ................ = 22
Metadata output location ..................... = C:\utils\JDev903\bibeans\bin\bi_metadata.txt
I can connect to OLAP BIBDEMO (and SH) schema using OEM.
I can connect to BIBDEMO from JDev Connections (Catalog connection to BIBCAT, OLAP connection to BIBDEMO).
How can I establish the connection from the bootstrap sample?
Pavel

Please try follow the steps under "Installing and Configuring the Samples "http://otn.oracle.com/products/bib/htdocs/samples/installing_samples.html - the section titled "Update the samples project settings".

Data Access Error in OIM Scheduler

I have a scheduler task in OIM,which fetches the "*Manager Employee ID*" custom field from OIM and if that is not empty then updates the Manager ID for that user.
The scheduler task when run throws an Data Access error, every time it starts and closes.
The same Scheduler code is working fine in the UAT environment successfully, but throws the error "Data Access Error" in the Prod environment.
In the code there is a catch block for catching the "*tcDataSetException*" and this is where the error is thrown from.
When i looked in to the code i found that the "*tcUserOperationsIntf*" was initialized but not closed in the finally block. Will closing the "tcUserOperationsIntf" slove this problem or am i missing something ?
When is the Data Access Error occur??? There are other schedulers that are running fine in the prod environment.
Any help in this regard would be really helpful to me.
Thanks

I am getting the UDF using the Query.
I am placing the piece of code that i am using for your reference
try {
     //Get Users for who have got there manager empid and manager empid not set to null
     String msQuery1 = "select usr_key,usr_login, "+udf_Manager_EMPID+" from usr where "+udf_Manager_EMPID+" is not null " ;
          tcDataSet getMemberUsers = new tcDataSet();
          getMemberUsers.setQuery(getDataBase(), msQuery1);
          getMemberUsers.executeQuery();
          for (int i=0;i<getMemberUsers.getTotalRowCount();i++)
               getMemberUsers.goToRow(i);
               String managerEmpId = getMemberUsers.getString(udf_Manager_EMPID);
               logger.debug("the manager emp id that we get for the user is "+managerEmpId );
               long userKey = getMemberUsers.getLong("usr_key");
               String userid = getMemberUsers.getString("usr_login");//Users.User ID
               logger.debug("the userkey that we get for the user is "+userKey );
               String msQuery2 = "select usr_key from usr where "+udf_EmployeeID+"="+ managerEmpId ;
               tcDataSet getMemberUser = new tcDataSet();
                    getMemberUser.setQuery(getDataBase(), msQuery2);
                    getMemberUser.executeQuery();
                    long userassociatedwithmgrid=0;
                    for(int j=0;j<getMemberUser.getTotalRowCount();j++){
                    getMemberUser.goToRow(j);
                         userassociatedwithmgrid = getMemberUser.getLong("usr_key");
                         logger.debug("the user id that we get for the user's manager is "+userassociatedwithmgrid );
                         updateusermanager(userid,userassociatedwithmgrid);
} catch (tcDataSetException e)
          logger.error(e.getMessage() + " DataSetException");
In the above code the error is being thrown from the catch block as Data Access Error
As i told earlier this piece of code works fine in UAT but does not work in prod and throw the above error. The error is thrown from the line msQuery2
Thanks

Update-SPProfilePhotoStore Error

I am trying to update the user profile pictures with the Update-SPProfilePhotoStore -MySiteHostLocation https://sp.test.com/my/ -CreateThumbnailsForImportedPhotos $true and it is encountering this error. The my sites seem to have a document library containing
all the AD profile pictures that are named by GUID (like the one in the error). I am using an admin account to run this command (site collection admin, farm admin, etc.)
Update-SPProfilePhotoStore : Error processing the photo URL User
Photos/Profile Pictures/0c37852b-34d0-418e-91c6-2ac25af4be5b_93.jpg for user
test\testuser1: System.UnauthorizedAccessException:
<nativehr>0x80070005</nativehr><nativestack></nativestack>Access denied.
   at Microsoft.SharePoint.SPGlobal.HandleUnauthorizedAccessException(Unauthori
zedAccessException ex)
   at Microsoft.SharePoint.Library.SPRequest.PutFile(String bstrUrl, String
bstrWebRelativeUrl, Object punkFile, Int64 cbFile, Object punkSPFileMgr,
Object punkFFM, Int64 PutFileOpt, String bstrCreatedBy, String bstrModifiedBy,
Int32 iCreatedByID, Int32 iModifiedByID, Object varTimeCreated, Object
varTimeLastModified, Object varProperties, String bstrCheckinComment, String
bstrLockIdMatch, String bstEtagToMatch, Int32 lockType, String lockId, Int32
minutes, Int32 fRefreshLock, Int32 bValidateReqFields, Guid gNewDocId,
SPFileSaveParams sfsp, SPFileInfo& pFileProps, UInt32& pdwVirusCheckStatus,
String& pVirusCheckMessage, String& pEtagReturn, Byte& piLevel, Int32&
pbIgnoredReqProps)
   at Microsoft.SharePoint.SPFileCollection.AddStreamOrBytesInternal(String
urlOfFile, Stream file, Int64 fileSizeToSave, SPFileStreamManager spmgr,
PutFileOpt fileOpt, String createdBy, String modifiedBy, Int32 createdByID,
Int32 modifiedByID, DateTime timeCreated, DateTime timeLastModified, Object
varProperties, String checkInComment, Stream formatMetadata, String
lockIdMatch, String etagToMatch, SPLockType lockType, String lockId, TimeSpan
lockTimeout, Boolean validateRequiredFields, SPVirusCheckStatus&
virusCheckStatus, String& virusCheckMessage, String& etagNew, Boolean&
ignoredRequiredProps)
   at Microsoft.SharePoint.SPFileCollection.Add(String urlOfFile, Stream file,
Boolean overwrite, String checkInComment, Boolean checkRequiredFields)
   at
Microsoft.Office.Server.UserProfiles.UserProfilePhotos.CreateThumbnail(Bitmap
original, Int32 idealWidth, Int32 idealHeight, SPFolder folder, String
fileName, Hashtable properties, Func`2 transform)
   at
Microsoft.Office.Server.UserProfiles.UserProfilePhotos.CreateThumbnail(Bitmap
original, Int32 idealWidth, Int32 idealHeight, SPFolder folder, String
fileName, Func`2 transform)
   at Microsoft.Office.Server.UserProfiles.PowerShell.SPCmdletUserProfilePhotoS
tore.InternalProcessRecord()
At line:1 char:1
+ Update-SPProfilePhotoStore -MySiteHostLocation https://sp.test.com/my/
-Cre ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : WriteError: (:) [Update-SPProfilePhotoStore], SP
   Exception
    + FullyQualifiedErrorId : Microsoft.Office.Server.UserProfiles.PowerShell.
   SPCmdletUserProfilePhotoStore

Hi,
Are you using Farm administrator account? The error message says that it's related to security issue and access denied!
Regards
Henrik A. Halmstrand
sharepointrevealed.com
getspconfig.codeplex.com
Please click Mark As Answer; if a post solves your problem or Vote As Helpful; if a post has been useful to you.

Error: EncryptedLocalStore database access error in AIR 3.4

Hi,
A few of our users were prompted to update to Adobe AIR 3.4 today. After doing this they were no longer able to use our Adobe AIR "desktop" app. I've downloaded the 3.4 SDK and run our app via ADT and I get the following error in the Introspector:
Error: EncryptedLocalStore database access error
Our app stores configuration info in the EncryptedLocalStore.
This has never occurred before and if I uninstall 3.4 and go back to 3.3 the problem does not exist. We need an urgent solution to this because we have hundreds of users who use our AIR app every day. We've told them NOT to update to 3.4 until further notice.
Any assistance would be greatly appreciated.
Brad.

Hello AIR developers,
I want to thank you for your patience and again apologize to you for catching you off guard with this change. Our team met today and our immediate plan is to roll the ELS changes back to the AIR 3.3 level. We are working on a timeline for when this update will be occur. We are treating this with the highest priority and expect it will not take long.
For those interested, here’s how and why this change occurred. Over the past year or two we’ve heard complaints about the reliability of our ELS implementation, especially on the Mac platform. We’ve known all along that we wanted to refactor this feature and remove dependence on third party libraries. We undertook this restructuring during the 3.4 release schedule and finished without hearing any major complaints from our internal or prerelease users. One assumption we made was that ELS data was treated like a volatile cache. In the past we’ve given guidance on the usage of ELS in both blogs and our help documentation, suggesting that developers should not depend on ELS as permanent data storage because it “can be lost for a variety of reasons”. Our position on this hasn’t changed, but we acknowledge and understand that some applications have come to depend on this data and if at all possible, we should do our best to persist it.
Going forward, we will most likely reimplement our changes from 3.4, however when doing this we will also work to provide a way to automatically upgrade and persist your application's data. We will also give plenty of advanced notice and make releases available on our labs.adobe.com site. We want this change to improve your lives by adding improved stability and we look forward to working with you on this in the future.
Thanks,
Chris

ACCESS.ERROR: Authorization check for caller assignment to J2EESecurityRole

Hi
After updating our portal (NW04 SP20) this new error occurs in the default.trc log.
<i>ACCESS.ERROR: Authorization check for caller assignment to J2EE security role [service.jms.default.authorization : administrators] referencing J2EE security role [SAP-J2EE-Engine : administrators].</i>
I have not found anything helpfull thusfar.
Thank you for your help in advance

Hi,
We had the same problem after upgrading to 2004s sp13.
We applied all available patches and it went away.
Check out this thread:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=614693&tstart=0">https://www.sdn.sap.com/irj/sdn/thread?threadID=614693&tstart=0</a>
Best regards,
Avisahi Zamir

File Not Found / Fade Update Failed Error -43

I have been getting two errors all of a sudden when instigating playback in the Arrange window in Logic 9.
File Not Found Result Code -43
and
Fade Update Field Error -43
I have googled information on this and have tried the following:
Used "Save As" and changed the name of the project file
Removed automation at the start of 3 tracks where i have automated in a gradual increase in volume
Gone to the Audio menu and selected "Delete Fade Files"
None of the above have worked. I have not used the crossfade tool to add a fade to the start or end of a track, i have only created a fade effect by using Volume Automation.
There seems to be other people having the same problem but i haven't found any with the -43 error code.
Does anyone know what that code relates to?
Have you any suggestions as to how i can get rid of this error?
Thanks

I recently had issues with a "File Not Found" error, though it was a different code #. (-61, or something similar.)
I was trying to move a track from my old G4 and work on it on my Macbook Pro laptop.
The problem turned out to be related to file permissions.
Logic is not a network-friendly program, and OS X is hyper sensitive to permissions, so to access a file that was originally stored on another computer, I had to do two things:
"Get Info" for the drive (it was not a system drive) that the original file was stored on, and check the box at the bottom:
"Ignore Permissions on This Volume"
From the user account on that computer, I then copied the file from the internal drive to an external firewire drive which also had "Ignore Permissions" checked off in the "Get Info" window.
I could then access the file from my user account on the laptop.
Once I did those steps, the "File Not Found" error no longer appeared.

Web services Access Error: 404 -- Not Found

I'm going through the web service example on the help menu. The vi is built exactly as required and the deployment works. Labview is running and the vi is open, but when i start up firefox and go to the url, i get the error "Access Error: 404 -- Not Found". Any ideas? Thanks.

Hi Pojoaque,
Thanks for the update. Which example is called add?
Maybe its the address book example, if so, please see this KnowledgeBase article with a known issue with this example - also please double check your configuration of LabVIEW.
In the VIs you create yourself what are you trying to do?
Why Does the Address Book RESTful Web Service Project Found in the LabVIEW 8.6 Example Finder Not Work?
http://digital.ni.com/public.nsf/allkb/A8830F04188D2835862574AA0059055E?OpenDocument
If its the VI itself which does work - have you checked your LabVIEW configuration allows access to the webserver for all vis?
Hope this helps,
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

"iMac.sparsebundle" could not be accessed (error(null))

My time capsule backups of my iMac to the time capsule has not worked since Nov 11. I think I may have turned it off at that time because the frequent updates were slowing down my iMac. Since then I've upgraded the RAM. When I turned on the Time Capsule back-ups, however, I keep getting an error message:
"The backup disk image "/Volumes/My Time Capsule/My iMac.sparsebundle" could not be accessed (error(null)).
I don't have a disk for my current Operating system, which is OS X 10.9.2. I have downloaded my last several upgrades thru the Apple Store.
I have gone thru some of the simple steps rebooting everything. I started the Terminal and gave the commands that Linc Davis suggested in Oct 2013, article with same message, but (error(-1)). I got the lines below:
I really don't know what to do during a safe mode restart.
Can anybody help me to get my Time machine working again?
Thanks for any help,
docnsg
#1
com.trusteer.driver.gakl_driver_2 (1)
#2
com.trusteer.rooks.rooksd
com.oracle.java.Helper-Tool
com.adobe.fpsaud
#3
jp.co.canon.cijscannerregister.54944
com.hp.devicemonitor
com.trusteer.rapport.rapportd
com.targus.agent
com.oracle.java.Java-Updater
com.hp.messagecenter.launcher
com.hp.help.tocgenerator
com.conduit.loader.Agent
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
#4
/Library/Components:
/Library/Extensions:
ATTOCelerityFC8.kext
ATTOExpressSASHBA2.kext
ATTOExpressSASRAID2.kext
ArcMSR.kext
CalDigitHDProDrv.kext
HighPointIOP.kext
HighPointRR.kext
PromiseSTEX.kext
SoftRAID.kext
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
HPSmartPrint.framework
NyxAudioAnalysis.framework
PluginManager.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/InputManagers:
CTLoader
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
CitrixICAClientPlugIn.plugin
Default Browser.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/Internet Plug-Ins (Disabled):
Flash Player.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
.DS_Store
com.conduit.loader.agent.plist
com.hp.help.tocgenerator.plist
com.hp.messagecenter.launcher.plist
com.oracle.java.Java-Updater.plist
com.targus.agent.plist
com.trusteer.rapport.rapportd.plist
/Library/LaunchDaemons:
com.adobe.fpsaud.plist
com.oracle.java.Helper-Tool.plist
com.trusteer.rooks.rooksd.plist
/Library/PreferencePanes:
Flash Player.prefPane
JavaControlPanel.prefPane
RapportPreferences.prefPane
Targus.prefPane
/Library/PrivilegedHelperTools:
/Library/QuickLook:
GBQLGenerator.qlgenerator
iBooksAuthor.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
ct_scripting.osax
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Office.mdimporter
iBooksAuthor.mdimporter
iWork.mdimporter
/Library/StartupItems:
Parallels
ParallelsTransporter
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
Library/PreferencePanes:
Library/Services:
.localized
#5
GrowlMenu, GrowlHelperApp, iTunesHelper, Stickies, Alfred

First, if this is your only backup, you must make another full backup to a locally-attached external hard drive. One backup is never enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
2. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take several hours. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
3. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups will be lost, so don't do this until you've backed up to another device. After erasing, select the TC again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible.

HT201250 I keep receiving the following backup disk image /Volumes/Data/Niki's Mac Book Pro spamyrsebundle could not be accessed (error -1). How do I fix this?

I keep receiving the following backup disk image "/Volumes/Data/my MacBook Pro sparsebundle could not be accessed (error -1). How do I fix this? I had just updated some software and am afraid something hurt the time machine.

See #C17 in Time Machine - Troubleshooting.

Compressor Update Access Error

Similar Messages

Maybe you are looking for