CompressorTranscoderX (Not Responding) After Reboot

Hmmm... I'm not sure what to make of this:
After installing FCS 3 (FCP 7, etc.), and a reboot, I see a dozen or so Compressor-related processes, even though I haven't used Compressor since that reboot. Many of them are "CompressorTranscoderX" and they are all labeled "(Not Responding)."
I had been doing some Compressor work on my cluster (all on my 8-processor machine), but that was before the reboot.
Should I "quit" those processes?

Not sure exactly why this happens... but I noticed this with any installation of FCS2 on 10.5, never tried FCS3 though, but it sounds like the same thing.
Even though they say not responding, I haven't noticed this causing any problems. I know it's weird to see these processes red, but it seemed to be the norm in 10.5.
If you can encode normally and without issues, I wouldnt worry about it.
I have noticed in 10.6 this issue doesn't exist. None of the processes are red. Why, I have no idea.

Similar Messages

  • App Store not responding after upgrade to OS X Mavericks and installing free Keynote, Pages and Numbers app

    My App Store is not responding after upgrading to Mavericks and installing free Keynote, Pages and Numbers Apps.
    Also I tried to reboot and restart and nothing happens still unresponsive.
    Tried to click as many times as I can the App Store and it won't open.
    Please Help.

    Dongski
    I had the same problem and solved it myself.
    Please see discussion  https://discussions.apple.com/message/23556072#23556072
    Hope it helps

  • Garageband not responding after upgrade to MacOS 10.5.8

    Garageband is not responding after an upgrade from Mac 10.4 to 10.5.8. how can I fix this

    Hello,
    Do you have some Sound amplifying App installed?
    If so remove it & reboot.

  • Garageband not responding after Yosemite upgrade

    Garageband will not fully load  on Mac mini (Mid 2011) and is not responding after Yosemite install and upgrade (10.10.2).  Can you advise me on how to get Garageband working again?
    Thank you

    Hello,
    Do you have some Sound amplifying App installed?
    If so remove it & reboot.

  • Why does Safari not respond after loading OSX Mavericks on a MacBook air

    Why does Safari not respond after loading OSX Mavericks on a MacBook air?

    What exactly happens? Does it launch at all? Have you tried rebooting?

  • Ipad 2 gone completely dead...not responding to reboot or charging..last check with service station last week said battery was in good shape, needed software update...how to go about it...please help

    Ipad 2 gone completely dead...not responding to reboot or charging..last check with service station last week said battery was in good shape, needed software update...how to go about it...please help

    By reboot do you mean pressing and holding both the sleep and home buttons for about 10 to 15 seconds (after which the Apple logo should appear) ?
    If you can't get the iPad to switch on then you won't be able to update its iOS version

  • When I try to open firefox it says that it is not responding, after I disabled the adobe flash plug-in it worked, how do I get it to work with flash

    Since I updated my adobe flash player firefox keeps saying that it is not responding after I open it and it loads my home page, I disabled add-ons and went throught the process of figuring out which one it was and it was adobe flash, but without flash I cant access a lot of different sites, how can I fix this. I have tried uninstalling and reinstalling both firefox and adobe flash, but neither works!

    See "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * [[Firefox hangs]]

  • My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

    I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

    Mylenium
    Thank you for the suggestions.
    I checked the WIndows log files. It reported the following error:
    The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: 4770
    Start Time: 01d0079a09bba381
    Termination Time: 13
    Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
    Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
    I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
    Thank you.

  • Premiere Pro CS6 not responding after adding anything to timeline

    I had been using Premiere CS6 successfully for a while, but starting a few months ago, it started not responding after I did anything.  I can add a title and a transition succesfully to the timeline and it plays fine, but as soon as I add a picture or video clip, it immediately stops responding.  It's frustrating because the program used to work fine before.
    The only thing I can think of that might have affected it was when I upgraded to Mavericks, but I haven't read anything about any serious problems with Premiere running on Mavericks.  I have a late 2008 MacBook Pro.
    Thanks in advance for the help.

    Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
    mavericks
    You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
    I am Windows so did not bookmark the messages, but I have seen SOME message threads with SOME solutions for SOME mavericks problems

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • Is anyone having trouble with the "home" button not responding after upgrading to 5.1.1 OS?

    Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?

    You will not belive how I accidently solved this - !!!
    Yes I had the problem immediately after the 5.1.1 'cloud' upgrade, the problems started (on my iphone 4) ... I followed the 'get power down button, then hold HOME for 30 secs' solution, but no result, nothing seemed to work and I was starting to get a bit agressive with the keep it pushed, multiple double click frustrations, icopybot multigesture solutions etc. and paid money ... but this comedy solution now works ...
    I discovered it because I ordered a waterproof case for my iphone for my motorcycle ... I've just fitted it to my iphone and all the problems have gone ??? what! ... so wondering why I looked at what the home button on the casing was doing - it was pressing ACROSS the home button i.e. it converted my finger point into a wider 'PRESS
    so taking the new case off, instead of using the point of my thumb to press HOME, I used the flat of my thumb to emulate it ....and initially nothing, so I wondered if it wa making better 'cross button' contacts, so I licked my thumb, wiped it and then tried again! - it worked!
    I can't explain it but it seems to work - try it! if the double click on HOME doesn't work lick your thumb dry it and try again! I've just done it again
    what a mad techno world we live in! :-)
    Dave

  • BC4j/JSP Application not responding after some time - when deployed on 9ias

    Hi,
    We are using BC4j/jsp application on 9ias. The application is not responding
    after some time. We have installed 9ias on PIII(384MB RAM). We tried to accesses
    with 10 users, and server is not responding to BC4J/JSP application.
    However the server could able to publish the JSP pages with standerad JDBC code even after that.
    many many thanks in advance
    null

    When the application deployed by BC4J/JSP not responding, does the sample JSP application still works? i.e. does any other application respond? Does 1 user respond? Is the database source (JDBC), running Oracle 8.1.7? What is the platform running the database (e.g. local NT database)?

  • BC4j/JSP Application not responding after some time - when deployed on 9ias BC4j/JSP

    Hi,
    We are using BC4j/jsp application on 9ias. The application is not responding
    after some time. We have installed 9ias on PIII(384MB RAM). We tried to accesses
    with 10 users, and server is not responding to BC4J/JSP application.
    However the server could able to publish the JSP pages with standerad JDBC code even after that.
    Please....help us.........
    many many thanks in advance

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Is there any mechanism that cleans up these connections (back down to the initial or some other minimum I would guess) or do they hang around until either the app server or database shuts down?<HR></BLOCKQUOTE>
    There is currently no mechanism for reducing the connection pool size after a period of high activity. Recently this has been frequently requested and as such will be implemented in the next production release.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>We have verified this in manual testing. However, when the load tool script exits it doesn't seem to release resources. We know this because we keep seeing our database connections go up and up as more tests are run. Further, we also seem to see more than one connection per "virtual user". For example, when I connect 5 users to the app in manual testing, I get 5 connections. But, when we run a test using the tool, we get 395 database sessions for 200 users. We are having a bit of difficulty understanding why the behavior is different.<HR></BLOCKQUOTE>
    Assuming that the you are performing your manual testing against the same instance of the application on which you are performing your load testing, I would assume that the connections are being released to the pool at the end of the request. One possible reason for the approximate 2:1 ratio between connections and virtual users may be BC4J's use of internal connections. What version of BC4J are you using?
    BC4J requires an internal connection to support state management and spill to disk. The internal connections are pooled with the transaction connection and only held for the duration of the persistence operation. However, if the web server is very busy then a large number of synchronous persistence requests may be received which would explain the eventual 2:1 ratio in the pool's high water mark.
    If the user start times and think times are staggered in order to reduce the incidence of synchronous persistence requests does the ratio of connections to web sessions stabilize at some lower number (i.e. 1.5:1)

  • HT1430 my iphone 5 is not responding after the installation of ios7 ?

    MY IPHONE 5 IS NOT RESPONDING AFTER INSTALLING IOS7 TODAY. NOT EVEN
    ABLE TO POWER OFF.
    Is there anybody to help me?

    Perhaps if YOU STOP SHOUTING someone will help you.
    What have you done to troubleshoot thus far?  Have you taken the steps recommended in the User Guide (restart, reset, restore from backup, restore as new)

  • JSP Check. JSP is not responding after installation

    While installing e-buz I got an error for JSP Check.
    JSP is not responding after installation
    After that I just stucked.
    What might be the error. All system requirements were satisfied. MKS(I used cygwin, then MSVC, gnumake) Everything went fine till 100% installation.
    I am using following config
    System OS- windows 2k prof.
    P4 2.8Gz
    Ram- 1GB
    HDD 120 GB
    Thanks,
    Any help will be appricated
    --Arvind Ashtekar                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Check the Apache and Jserv log files You might need to bounce Apache puttinh log=true in jserv.properties file and try to fix error message you get Jserv OR apache log file.
    Regards,
    Kanhaiya

Maybe you are looking for