Computer at work, wont recognize Iphone.

Hello, I have 1.9Ghz Power PC G5 at work with the latest Itunes and all available updates as of 9/16/09. (OS = 10.4.11).
My iphone 3gs works fine otherwise but when I try to plug it in via USB/Synch cable at work, the computer just doesn't recognize. It used to work until recently. I tried restarting the computer with the iphone plugged in and there was a quick vibrate/recognition when it first turned on but then back to the unrecognizable status. I'm not trying to synch, just trying to charge the phone. It used to work and sometimes when I disconnect the usb I get the device removal warning (which leads me to believe there is some recognition.
Any ideas...I've tried the cable on another mac in my office and I know its working.

Try reinstalling iTunes (don't delete the current one, just download and reinstall, even if it's the same version. If that fails, remove and reinstall AMDS:
http://support.apple.com/kb/HT1747

Similar Messages

  • My iphone will charge in the wall, but wont charge on my computer, and itunes wont recognize it, how d i fix it?

    My phone will charge in the wall, but wont charge with the usb in my computer. ive bought a new cord, so i know thats not it, but my computer wont recognize my phone, HELP!

    See if placing the iPod in recovery mode will make the iPod visible in iTunes.  If it does then restore the iPod via iTunes on your computer.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Mac wont recognize iphone

    I plug my iphone into my macbook pro and it charges but my mac wont recognize it and sync in itunes. It also does not show up in finder. I know its not my iphone or the cord because I tried on my friends computer and it worked.

    Are you running the current iTunes version (11.0.1)?
    If you are, then this should help:
    iOS: Device not recognized in iTunes for Mac OS X

  • Itunes wont recognize iphone 4s

    itunes will not recognize iphone 4s. I have gone through the trouble shootinging steps that Apple provides but will still not work. Any suggestions?

    If connecting in recovery mode did not work, did you try to connect to another computer, to make sure your phone has no hardware failure?
    iOS: Recovery mode
    iOS: Device not recognized in iTunes for Windows

  • "my computer" (pc) does not recognize "iphone"

    when i go to my computer it does not recognize the iphone usb, however it does recognize the ipod. my iphone does synch with itunes...no problem there...i thought perhaps prob with usb, but all four ports work perfectly with other applications. it must be doing something right b/c itunes does connect...i am unable to access to transfer photos. please help!

    ok

  • Computer wont recognize iPhone 3G

    So situation is as follows. READ VERY CAREFULLY BEFORE RESPONDING!!!!
    So i got iPhone 3g from a finnish Apple forum and it worked perfectly untill today. I tried to re-install the phone and i got 1600 error on iTunes, and phone got stuck on DFU mode. So i took the phone out of my PC and plugged it back in, but nothing happend. My computer wont even play the sound when i connect new device and my Power/Sleep button is broken on that iPhone. Is there any way to force it to work or should i just get new phone? (It will like 250-300 euros on my operator *** i know?!!?) I think the phone is still on so should i wait the battery run out or what? Any succestions? And i have tried all my other PC's. But before it did this, my PC warned about some slow USB when reseting iPhone software. So i did something wrong or is it phone fault? Please help me this is my first iPhone. iOS is 4.2.1

    sad.  Thanks for sharing, though.

  • Itunes/computer wont recognize iphone 5s

    I just recently bought a used iPhone 5s and tried to plug it into my mac book so I can sync the phone to my iTunes, but the phone is not even recognized when plugged in. I updated my iTunes and tried restarting the phone and computer to see if that would help, but still nothing. When I plug the phone in a message pops up, "This cable or accessory is not certified and my not work reliably with this iPhone" but it is the original cable the phone came with. The cable itself works while being plugged into the wall outlet. Any suggestions to fix this ?

    Hello there ChristinaGabri,
    If your phone is still not recognized in iTunes because of this error message, I would take a look at this info from the following article:
    If you can’t charge your iPhone, iPad, or iPod touch
    If you see an alert
    When you plug in your device, you might see one of these alerts:
    “This cable or accessory is not certified and may not work reliably with this iPhone.”
    “This accessory is not supported by this device.”
    If you see one of these alerts, unplug your device try and these steps:
    Look at the connector at the bottom of your device and make sure it’s free of debris, then reconnect the USB cable.
    If you still see an alert, try a different USB cable or charger.
    Get more help
    If your device still doesn't charge or you still see an alert after trying the steps above, contact Apple Support.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Computer wont recognize Iphone 4s

    I have a iphone 4s and for the past few months my computer doesnt seem to be recognizing it. I have a feeling its the phone itself. When i plug it into my computer it charges but it doesnt show up in any files or in itunes. I have tried this with 2 other computers and its the same thing. Nothing about it shows up in the Device Manager. All i have on my computer that deals with apple is Apple Application Support, Apple Mobile Device Support, and Apple Software Update. I tried with one of the helps here online and i couldnt even find Other Devices in the Device Manager. Can anyone help is it my computer or is it the phone itself? im thinking of taking it to a apple store to get it looked at but im not sure if it will cost me or not.

    Ya that's the exact same that's going on with mine. I tried going through my entire computer i think I even reset my phone cause all my music got wiped off.

  • Computer wont recognize iphone as a camera or device

    Any suggestions for this?

    shaunie07,
    First, does the iPhone have a charge on the battery, as discussed in this article:
    http://docs.info.apple.com/article.html?artnum=305742
    What other USB devices are currently connected to the computer, if any?
    Have you tried shutting down the computer, and leaving it powered off for at least 30 seconds, then restart it and try connecting the iPhone?
    Try reseting the iPhone by holding down the sleep/wake and home buttons until you see the Apple logo, ignore the "Slide to Power off" screen?
    Both of the previous steps could be done simultaneously. Shut down the computer, reset the iPhone, and then turn the computer back on.
    Hope this helps,
    Nathan C.

  • Computer wont recognize iphone

    i unplugged my iphone4s on accident while it was doing a backup restore in itunes when i plugged it back in a notification popped up saying the device in the usb port is unrecognised because the device has malfunctioned.... how do i fix this

    Try getting into DFU mode in your iPhone and connect it to iTunes.
    Search Youtube on how to enter DFU mode.

  • Itunes wont recognize iphone

    can anyone seriously help me. i tried EVERYTHIN. itunes wont open my iphone. only the fotos pop up and then its done, i tried everythin. its driving e crazy. its was fine till 3 days ago. i come back from a work trip and its all gone. i even did a full reset, and lost everything. im sooo upset now. can anyone help. thanks. i have latest itunes, reistalled, and did everythin else.

    So i started having this same issue with my Powerbook G4 - setups a time with a Genius today and well after a reboot of the Mac and a reset of the iPhone everything was good BUT!!!!!!
    make sure in itunes you have in the Summary of your iPhone, under Options - the check box next to auto sync -
    The Genius asked do you use your computer to charge, NO then you really would only need it to sync, so there you go.
    works great now
    thanks

  • ITunes wont recognize iPhone 5

    Alright, I've had this problem for a while now, and I'm at my wit's end. Hope someone can help me.
    First of all, I'm running Windows 8.0 on a Lenovo, using iTunes 11.1.5, and an iPhone on iOS 7.0.6.
    Problem is, when I plug my iPhone 5 into my computer, the computer recognizes the iPhone, but for some reason, iTunes doesn't realize it's there. On top of that, every time I plug in, my phone gives me the same "Trust this computer?" prompt, like it doesnt recognize the computer I told it to trust 5 seconds ago. A couple times, I got lucky and iTunes dignified me with a "An iPhone has been detected, but could not be identified properly." prompt. I've tried uninstalling and reinstalling the mobile device driver, updating everything, uninstalling and reinstalling iTunes, resetting my iphone settings, but nothing works. Any ideas?

    Having the exact same problem with my iPhone 4S.
    This started happening right after upgrading iTunes to 11.1.5 - never encountered this issue before.
    Tried doing the same thing you mentioned above with no luck at all.

  • Windows 8.1 itunes wont recognize iphone

    Go to your device Manager by: Going the search in your charm bar and typing in Device Manager.
    Expand Portable devices and or Universal Serial Bus controllers and look for your device.
    Right-click the Apple iPhone, Apple iPad, or Apple iPod entry in Device Manager and chooseUpdate Driver from the shortcut menu.
    Click "Browse my computer for driver software."
    Click "Let me pick from a list of device drivers on my computer."
    Click the Have Disk button. (If the Have Disk option is not present, choose a device category such as Mobile Phone or Storage Device if listed, and click next. The Have Disk button should then appear.)
    In the "Install from Disk" dialog, click the Browse button.
    Use this window to navigate to the following folder:
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
    Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead).
    Click OK in the "Install from Disk" dialog.
    Click Next and finish the driver-installation steps. Open iTunes to verify that the device is recognized properly.
    If that doesnt work you can go click this link and follow the guide from apples website
    http://support.apple.com/kb/TS1538?viewlocale=en_US

    go into the control panel (hover in the lower right corner to bring up the menu that leads you there)
    go to programs, add/remove programs
    uninstall iTunes, apple mobile device service, apple application support
    then go out and redownload and reinstall iTunes. Try again to sync
    There seems to be something where an iTunes update doesn't write over all the drivers. The only way to m ake it write the right drivers is to delete the old ones and force iTunes to start over.
    You won't lose any of your music.

  • ITunes wont recognize iPhone 4

    Downloaded the new iTunes (12.0.1.26) and try to sync my new music with iTunes but my iPhone 4 (iOS 7) wont even come up in itunes! It comes up on my computer (windows 8) and i can browse photos etc through that route. I have tried running itunes diagnostics and no luck. This has only started to happen with the new itunes update. After plugging it into my laptop, my iphone says do you want to trust this computer and i click trust and it then disconnects the iPhone and reconnects it itself.

    Hi ..
    You may need to disable your anti virus software prior to clicking, "trust".
    iOS: Device not recognized in iTunes for Windows

  • Itunes wont recognize iphone 3G

    OK, I have tried every solution on Apple's website with no luck. I am at the end of my rope.
    I have 2 old iphone 3G's. I would like to use one of them as an ipod touch. The only problem is, when I plug either of them in, itunes freezes up for about 3 minutes and when it finally unfreezes, it doesnt display the iphone as a device. This happens with both iphone 3G's. I have an iphone4 also... when I plug it up, no problem, comes right up. The hangup only happens with the 3G.
    Now, thinking this might be an issue with the iphone 3G, I tried it at work on my work computer. Both phones come up right away, no problem. Both my work computer and home computer are running Windows 7 with the latest version of iTunes.
    The only thing I can figure is a software conflict, but I cant figure out what it is. I ran msconfig and disabled everything on startup, still the same problem. Ran the device connection toubleshooter in iTunes and it confirms I have a problem, but no solution fixes it.
    This thing has me stumped... Someone please HELP!

    3 days of persistence paid off. I found info on this website about how to update the driver for the iPhone and miraculously, it worked.
    Just do a search for it. Also, not sure if it's related, but when the window popped up asking me what I wanted to do when I connected the iPhone, I didn't answer and left it open. I just went straight to iTunes instead.
    Good luck.

Maybe you are looking for

  • Ipad2 not connecting to itunes anymore

    I have had my ipad2 for about 3 or 4 months, and havent had any problems until now. Now, I can't seem to connect to itunes, which has always worked in the past. Also, It doesnt say it is charging, but it does seem to be. It did connect once for about

  • Remote desktop users lost overnight on windows server 2008 R2

    We set up a group in active directory to allow certain users access to this Virtual Machine. I am able to go into the the remote Users of the VM and add this group from active directory. Every Morning i have to re-add this group as it has gone at som

  • Input Help F4 in Interactive Adobe Form

    Dear All, I want to display search help in Adobe Form. I have created Webdynpro Component in which I have used the PDF Source as well as created Form where I have used Value Help.In context also I have provided search help.But still I am not getting

  • Restricting inputfield on web dynpro

    Hi All, I am customizing web dynpro screens wherein some of the input fields should not accept more than 5 characters. I tried setting the 'length' attribute to 5 in 'properties' tab, but still I am able to enter more than 5 characters. Any other opt

  • How to install apps to another hard drive

    I have a late 2012 iMac 21.5 inch.  I boot from an external solid state drive.  However there are apps I would like to install to the internal hard drive.  Whenever I install an app from the app store it by default installs to the boot drive.  I am s