Computer authorization error message using Windows 8
Hi all. When I go to authorize my computer which has Win 8, it doesn't work. I get a 'Connection Error' message. It says: "An error has been detected. Connection Error. Digital Editions could not connect to the activation server. Please make sure you are connected to the internet." I had no problem with my laptop that has XP. I was able to authorize and download my ebook with absolutely no problems. Is there a compatibility issue with Windows 8? Thanks so much. Any help greatly appreciated.
No compatibility issue with authoization on Win8, at least not for most people.
It could be your firewall, or maybe even the antivirus.
Doubloe-check, or try with the firewall (temporarily) turned off.
Similar Messages
-
I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR, -
RPC Server not Available error when using Windows Fax & Scan under Windows 7
RPC Server not Available error when using Windows Fax & Scan under Windows 7
Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
"Could not complete scan" error when using Windows Fax and Scan
"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
MotorbikeYou can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
cant install Itunes on my work computer, get error message: "Apple Application support not found, so i uninstall and reinstall again and its the same message
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2 -
Error while using window.open() in JSP page
I am getting error while using window.open() in my JSP page.
This is code in my JSP page,
<h:commandLink onclick="loadContextSensitiveHelp(#{setNewDayStatusBean. cycleStatusViewObject.helpUrl});" value="Help">
function loadContextSensitiveHelp(helpPageName) {
top.consoleRef=window.open('#{facesContext.externalContext.requestContextPath}/main/patient/helpPageName','myconsole',
'width=350,height=250'
+',menubar=0'
+',toolbar=0'
+',status=0'
+',scrollbars=1'
+',resizable=0')
top.consoleRef.document.close()
I am getting the following error in my browser,
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: /SetNewDayStatus.jsp(69,34) #{..} is not allowed in template text
org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:838)
org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:428)
com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:444)
com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:116)
com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.13 logs.
Anyone help me to solve this issue. Thanks............................I am getting error while using window.open() in my JSP page.
This is code in my JSP page,
<h:commandLink onclick="loadContextSensitiveHelp(#{setNewDayStatusBean. cycleStatusViewObject.helpUrl});" value="Help">
function loadContextSensitiveHelp(helpPageName) {
top.consoleRef=window.open('#{facesContext.externalContext.requestContextPath}/main/patient/helpPageName','myconsole',
'width=350,height=250'
+',menubar=0'
+',toolbar=0'
+',status=0'
+',scrollbars=1'
+',resizable=0')
top.consoleRef.document.close()
I am getting the following error in my browser,
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: /SetNewDayStatus.jsp(69,34) #{..} is not allowed in template text
org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:838)
org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:428)
com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:444)
com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:116)
com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.13 logs.
Anyone help me to solve this issue. Thanks............................ -
When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!
You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org -
i'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system
In general, when desktop software is using Flash Player, it's because they're embedding an Internet Explorer window in the application. If you don't have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop application isn't going to work.
So, fire up Internet Explorer
Go here: http://get.adobe.com/flashplayer/
Follow the prompts, and then re-launch the application after you've completed the installation in IE. Hopefully that sorts it out for you. -
Getting Error Message using Formatted Search
Hi,
I am using formatted search for validating a particular field, and that happens fine. Kindly let me know if I can also display error messages using the same formatted search.
If yes, what am I to include in the formatted search, and if No, please let me know the alternative.
Thanks in advance.
Satish.Hi Satish,
if you validate the value of a field and intend to rise an error message on detection of invalid values in a separate window or in the status line there is no way to do it with Formatted Searches (as far as I know)!
You could use the following methods as simple workarounds if you don't want to program a solution with the SDK:
1. Solution
You can display the text of an error message in the field you validate; of course, the invalid data then is overwritten with your error message, but you could construct the message from fixed text parts concatenated with the data found in the field.
Be sure to save the original data of the field in your query before you do anything else. This way you sustain the field data in case the data is valid!
Example:
DECLARE @save AS ....
SET @save = $[xxxxx]
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
ELSE
SELECT $[xxxxx] -- no error - sustain valid data
END
2. Solution:
You define a sepate User Defined Field (UDF) for potential error messages - that's the way I often programmed it for our own applications. Suppose that the Formatted Search is connected to this UDF and the field to validate is field 'xxxxx'. The Formatted Search is triggered (auto-refresh) on change of field 'xxxxx':
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
END
May be that there are minor syntactical errors or missing type conversions in the code above - but I hope it gives you an idea on how to solve your problem without SDK programming!
Good luck!
Frank Romeni -
When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?
after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok. -
No Authorization Error message while displaying plan data in the layout
I am trying to execute laypr01 layout in planning area 4EXP0001(Delivered Content). I am getting a NO AUTHORIZATION error message. When I went back to SU53 and I can see that all authorizations have been successful.
Can somebody please let me know if I am missing something?
Thanks for your help.
LathaHi Latha,
Run transaction RSSM, go to authorization check log, enter your user. Try execute the BPS layout again, and get the error message.
Then go back to RSSM, and display the Trace by clicking on Trace > Display, and it show you what the authorization problem is.
Hope this helps,
Frank -
To display a continuos Error Message using BADI
Hi Everybody,
There's a transaction that makes use of classes and interfaces to display an ALV grid with input enabled frames and fields. There's a need to display an error message using a specified BADI method, which gets triggered after the user enters the input. The error message is working fine for the first time.<b>But when i'm trying to enter the same input and press enter after the error message, the transaction is getting closed. How can i display the same error message, until and unless the user enters the correct input ?</b> I've tried to trace the control using the debugger after the enter is pressed, but the debugger is also getting closed and the control is coming out of the transaction. Help me out in displaying the error message.Hi,
Open the interface and go to the Methods tab.
Select the Method and click on Parameters.
In the method parameters, declare a variable
RETURN Changing Type ALM_ME_BAPIRET2_T.
Now, inside your code, declare DATA : ls_return TYPE bapiret2.
and populate this RETURN table, something like:
if not ( wa_mara-mtart eq 'SPAR' or wa_mara-mtart eq 'ZMRO' ).
CLEAR ls_return.
MOVE 'E' TO ls_return-type.
MOVE 'ERR_MESSAGE' TO ls_return-id.
MOVE '999' TO ls_return-number.
MOVE 'Enter proper error message here' TO ls_return-message.
INSERT ls_return INTO TABLE return.
endif.
Then, back in your program, check if this table is empty proceed otherwise, STOP or EXIT.
Regards
Subramanian -
When i try to install i tunes i get error message 7 windows error message 126
When i try to install i tunes i get error message 7 windows error message 126
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99304) -
Send custom error message using IDoc conversion rule?
Hello,
I am using an Idoc conversion rule in BD79 to load cost centers. In my conversion rule I use a conversion exit function module to concatenate 2 specific characters and sending cost center value together and then this output value placed in the receiving cost center field. This works fine, but now I want to send a custom error message to the idoc and fail the idoc if the sending cost center value is greater than 8 digits.
Does anyone know how to send an error message or update an idoc with an error message using a conversion rule (bd79)?
Thank you,
RhondaHi Rhonda,
Any luck on the below.. i have a similar issue...
Sorry to hijack your thread...
Maybe you are looking for
-
SAP B1 client system we got error Internal Error (-1101) occurred.
Hi, when we are connecting server through particular user it's showing error Internal Error (-1101) occurred Message 131-183". this is client laptop contain OS is vista and sever has windows 2003 server.when we are login after it's showing to update
-
Feeding an Array of Objects returned from a remote object using AMFPHP Remote procedure calls.
Hi guys, I am working on an AIR Application that Uses Flex and AMFPHP remoting, The returned data type is an array of objects containing a sting an a url to an image on the server, How do bind this to a tilelist so i have a list with images represent
-
Blocked account, and can't update credit card. Painful - please help!
My account is now blocked, after making a payment on June 11th. Cannot email or call support. Any help or ideas? Bob
-
Spinning beach ball after hard drive upgrade
Im running a macbook pro i7 2.2ghz 8gb ram version 10.6.8 SL I recently upgraded my 128gb ssd to a 512gb ssd drive. I cloned the drive to new drive and ever since then, I get the spinning beach ball very often whereas I never got it prior to the h
-
Date validations for fiscal year
My selection screen has select option for date in that it shold take financial year i.e from april to march. suppose if date-low = dec2008 date-high = feb2008. how shld i write the code for this.validations etc. it should not give error saying lower