Computer authorization issues

I authorized my computer (several times) but a song I purchased a couple years back is still saying it can't play unless authorized. Then it asks me to authorize it over again....and so on. Any suggestions?

Delete and redownload it if doing so is free in your country.
(89528)

Similar Messages

Getting Computer authorization issue with 11.4!

When I try to synch my IPhone 5S on Windows 8.1 / iTunes 11.4, I keep getting a message that "This computer is not authorized for the apps that are installed on our iPhone" and when I de-authorize and authorize it again, it still does not work...keep getting this message...

Hey Ashfromsea,
Thanks for the question. I understand that you are experiencing issues with iTunes Store authorization. The following resources may provide a solution:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Thanks,
Matt M.

Computer Authorization issue with iTunes 11.4

When I try to synch my IPhone 5S on Windows 8.1 / iTunes 11.4, I keep getting a message that "This computer is not authorized for the apps that are installed on our iPhone" and when I de-authorize…

Hey Ashfromsea,
Thanks for the question. I understand that you are experiencing issues with iTunes Store authorization. The following resources may provide a solution:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Thanks,
Matt M.

Problems loading iPod music onto a second computer (authorization issues?)

Hi everyone -- I've spent over 3 hrs on this problem without finding an answer, so hoping someone can help!!
I bought a Dell laptop (running Windows XP) which I now use as my primary computer, and am trying to upload my iTunes music onto it. I have authorized it over and over several ways:
1. iTunes store -> authorize computer (I get an "authorization successful" response)
2. trying to play a song off my iPod and having iTunes respond with a "you're not authorized, do you want to authorize?" and I say yes and keep re-entering my account info and am told again it's now authorized.
But when I try to go to File -> Transfer purchases from Owner's iPod, I get a response that says "some of the purchases on your iPod could not be transferred because you're not authorized to play them on this computer" and once again asks me if I want to authorize. And NONE of the music is transferred.
So I went to check my account info to make sure it was authorized, and it said ONE computer was authorized. I thought this odd, since my original desktop computer (which has my full iTunes music library and plays and syncs with two iPods with no problem) would've been authorized... so I went to that desktop and tried to DEauthorize it, and was told that I couldn't because it wasn't authorized in the first place (which would explain why my account info said one authorized after doing my laptop). Does this make sense, that the desktop computer which I used to purchase all my iTunes msic and which works fine playing it and syncing to my two iPods would NOT have been authorized? ANYWAY, I then authorized this original desktop to see if it would change anything, and my account info did in fact change to say that now TWO computers are authorized, but when I went back to my laptop and re-attempted File -> Transfer purchases from Owner's iPod, I had the exact same problem (it says "not authorized"). I have also tried rebooting the laptop, as well as trying to do this with both of my iPods separately.
I am pulling my hair out! I don't have another external drive large enough to try to transfer the music files a different way, and really I should be able to use my iPod to do this for goodness' sake, right?!
Thanks for any help you can give!
Jen

Click here and here for information.
(34946)

ITunes 5 Computer Authorization issue?

I deactivated all 5 computers associated with my iTunes account. I try to authorize a new one and it still says I have 5 authorized. I check my account and it says I have only 1 authorized, and still cannot authorize the second computer. Any ideas?

Contact tunes support:
http://www.apple.com/support/itunes

I backed up my movies and rebuild my computer, and after making sure i'm using the latest version of itunes and quicktime and and making sure i still had spare computer authorizations, i still get error 23132. Please help.

I backed up my movies and rebuild my computer, and after making sure i'm using the latest version of itunes and quicktime and and making sure i still had spare computer authorizations, i still get error 23132. Please help.

I had this exact issue. Spent over an hour on the phone with apple support, they couldn't resolve. Here is what I ended up doing, that worked.
1. Turned iTunes match off on all my iOS devices
2. Deleted the offending playlists from the iOS device they originated on
3. Started iTunes, let it run (literally) for an hour before it became responsive. First thing I did, before clicking anywere else was disable iTunes match. If I clicked anywhere, it would clock for another hour.
4. Let iTunes run overnight, by morning it had cleaned out the repeating play lists. This got my Mac/iTunes back to an operable state.
5. Restore iPhones from backup in iTunes.
What was causing my issue was a single playlist that was created on an iPhone, then suddenly showed up with several thousand duplicates on my other iPhone. The culprit playlist did not, for some reason, duplicate itself on my two iPads. Apple support seemed to think it was because the problem iPhone tried to sync the playlist to iCloud over and over again unsuccessfully, then it finally went through and populated the thousands of blank/failed playlists which then tried to propigate to iTunes and my other iOS devices. Seems like a reasonable theory.
I have not yet re-enabled iTunes match. So, no idea what will happen if I decide to go back down that rabbit hole.

Authorization Issues - Apple, please help

There have been several posts regarding users not being able to play their iTunes music due to authorization issues. Solutions have been provided, including the following:
1. Deauthorizing the account several times until the following message appears "This computer was not authorized. To authorize this computer, to play a song or video you have purchased using this account."
2. Deleting the "SC info" folder.
3. Authorizing the music using the original account (File > Get Info).
Nothing seems to be working. I've contacted Apple support, and they have been more than responsive and helpful, but they keep asking me to do the same things over, and over.
Everytime I enter my account authorization info, I get a message indicating that the computer is now authorized...however, the music still won't play.
I have now gone 3 months without being able to solve this issue (I've tried everything in the forums), and I am about to give up. Unfortunately, this also means flushing over $300 down the toilet. I still have all the files, so I am not asking to download them again (they are on my hard drive). I just want a fix...

Hi,
For the BW consultant use the following objects :
B_ALE_MAST
S_ADMI_FCD
S_APPL_LOG
S_ARCHIVE
S_BDS_DS
S_BTCH_ADM
S_BTCH_JOB
S_BTCH_NAM
S_CTS_ADMI
S_C_FUNCT
S_DATASET
S_DEVELOP
S_DOKU_AUT
S_FIELDSEL
S_FOBU_MTH
S_GUI
S_IDOCCTRL
S_IDOCDEFT
S_IDOCMONI
S_IDOCPART
S_IDOCPORT
S_LDAP
S_LOG_COM
S_OC_DOC
S_OC_FOLCR
S_OC_ROLE
S_OC_SEND
S_OC_TCD
S_PROGRAM
S_PROJECT
S_QUERY
S_RFC
S_RS_ADMWB
S_RS_COMP
S_RS_FOLD
S_RS_HIER
S_RS_ICUBE
S_RS_IOBJ
S_RS_IOMAD
S_RS_ISET
S_RS_ISOUR
S_RS_ISRCM
S_RS_MPRO
S_RS_ODSO
S_RZL_ADM
S_SCD0
S_SCRP_ACT
S_SCRP_FRM
S_SCRP_GRA
S_SCRP_STY
S_SCRP_TXT
S_SPO_ACT
S_SPO_DEV
S_SPO_PAGE
S_TABU_CLI
S_TABU_DIS
S_TABU_RFC
S_TCODE
S_TMS_ACT
S_TOOLS_EX
S_TRANSLAT
S_TRANSPRT
S_TWB
S_USER_AGR
S_USER_AUT
S_USER_GRP
S_USER_PRO
S_USER_TCD
S_USER_VAL
S_WFAR_OBJ
S_WFAR_PRI
For users :
S_ADMI_FCD
S_BDS_D
S_BDS_DS
S_GUI
S_OLE_CALL
S_RFC
S_RS_COMP1
S_RS_FOLD
S_RS_HIER
S_RS_ICUBE
S_RS_ISET
S_RS_ODSO
S_SPO_DEV
S_TCODE
S_USER_AGR
You also need to give the end user objects to the BW consultant. All of these objects have activities and values that need to be populated.
Cheers,
Kedar

Songs will not copy to iPod - authorization issue?

My apologies first if this topic has been covered already.
I just bought a shiny new 5Gen iPod and I need to load it up. Problem: any songs/videos I have purchased through the ITMS previously (with old iPod) will not copy to the new iPod.
Is this an authorization issue? How do I correct this? AND if I get the new iPod authorized correctly, does this mean I can no longer transfer stuff onto the old one?
How do any of you with more than one iPod handle this?
Please and thank you!
Powerbook G4 Titanium Mac OS X (10.4.2)

There are a few things you can do if this happens. Here are the first steps...
Have you played the songs in iTunes for a few seconds? This will authorize them. Now sync your iPod. Do they play?
If not, make sure everything is up to date on your computer...
iTunes
iPod Updater
If that doesn't work, in iTunes, go to advanced-->deauthorize computer. Now play the songs in iTunes. It will ask for your account information (from the iTunes Music Store). Enter that. Now play a few purchased songs for a few seconds. Sync your iPod. Do the songs work now?
If they don't, please post back for more suggestions.
btabz

Secured WebDAV Mounted Volume Authorization Issues

I use a secure WebDAV mounted volume from myDisk.se and up until the latest Security Update have had zero issues being able to manipulate files and folders as I would on a normal volume. However, since the installation of the Security Update (2009-004 (PowerPC) 1.0) I find weird things happening with this mounted volume:
1) I am able to mount the secured WebDAV share using my security credentials.
2) I can create a default "untitled" folder but when I try to change its name, the WebDAV authorization dialog pops up and despite entering the same credentials (why, I am not sure as the volume has already been properly credentialed in order to be mounted), access is denied.
3) Trying to create a file within a folder on the mounted WebDAV volume I previously created pre-update causes the same authorization issue.
I have no other WebDAV shares I can try to mount from any other companies so I am not sure if this is a myDisk issue or one borne from the Security Update. I am not a .Mac/MobileMe user and that info is not filled out in System Preferences. The internal hard drive has been meticulously maintained with Disk and Permissions repair being run both before and after each and every software update installed. Likewise, the volume's structure is also checked both before and after and shows no need for repairs.
Any ideas? Perhaps there is a corrupted file somewhere that's affecting the authorizations needed by this third-party WebDAV volume?
The machine that has this problem is the last model iBook G4/1.33GHz 12" display, 1.5GB RAM, and a 100GB 5400rpm HD which replaced the stock OEM 40GB 4200rpm drive about one year ago.
I'm not willing to do an Archive and Install at this point as the loss of the WebDAV access to my online volume is not critical. Inconvenient as heck but not to the point where I'm willing (or able) stop my normal work to spend the hours it will take to get WebDAV access back.
Thanks in advance for any insights.

same problem here with webdav, I can't mount my idisk from university network on Mac Pro 10.5.3 (although it mounts fine from home network on both ibook and PMG5 10.5.3). Everything was fine with 10.5.2 and I already re-installed 10.5.3 combo. Other bugs as well with .Mac prefs (keeps crashing, sometimes it shows the available space on idisk but still no mounting, with error -35 or -8086), but .Mac sync is OK
Jun 11 12:34:21 webdavfs_agent[579]: mounting as authenticated user
Jun 11 12:34:22 kernel[0]: webdav server: http://idisk.mac.com/[username]/: connection is dead
Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 received VQ_DEAD event (32)
Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 type 'webdav', mounted on '/Volumes/[username]', from 'http://idisk.mac.com/[username]/', dead
Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 found 1 filesystem(s) with problem(s)
Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
Jun 11 12:34:52: --- last message repeated 1 time ---

BI 7.0 Analysis Authorization issue: some reports displaying a blank page.

Hi All,
This is regarding BI 7.0 Analysis Authorization issue.
Overview:
we have restricted some queries at infoobject level.
Issue:
a. For some of the queries, we can see the selection screen but when we try to execute the query by clicking on the execute button (Queries WAD) we get a blank page, meaning nothing is displayed on the output (white/Blank screen).
b. When we execute the same query through RSRT, we get a message which says "Disconnecting from BW server..".
c. Let me explain further on this. Basically we are doing this in order to have limited access to Auditors at the client side. At the same time normal users should not get impacted due to this, hence we created two roles. One for normal users and other for Auditors.
d. Now the thing is that we execute the same report with normal user ID's the report executes properly and displays the output. it does not show the blank page.
e. But when we execute the same report with Auditors ID then we get a blank page.
Any idea why this is so?

Hi Neha,
I tried the below also,
GL Acnt
I EQ 0000134010
I EQ :
but still it didn't work.
No Infoobject is missing in Authorization Object.
For your point, "rsecadmin - > analysis -> execute as -> check for the desired user & analyze the log" it didnu2019t allow me to analyze, since as soon as click on execute button a pop-up comes up saying "Disconnecting from the BW server..."
As mentioned earlier also it is giving me the below message,
""I>> Row: 103 Inc: AUTHORITY_02 Prog: CL_RSR_RRK0_AUTHORIZATION RS_EXCEPTION 301CL_RSR_RRK0_AUTHORIZATION AUTHORITY_02"
Kindly suggest, since this is a show-stopper for us!
Thanks,
Ishdeep Kohli.

Variable screen/variant screen authorization issue

HI All,
We have implemented standard Cost Center Overview Report(0SR_C02_Q0002) in BI 7.
We have three selection fields:
1.Company Code which is mandatory
2.My controlling Area which is also mandatory
3.Costcenter which is not mandatory
The requirement we are facing over here is that in the Variable screen/variant screen when I enter a company code, then I need to display dynamically only those "My Controlling Area" values which are assigned to that particular company code and not all. In the same way after selecting the appropriate "My controlling area" value, I need to display only those cost centers in the cost center selection field which are assigned to the selected company code and My controlling area combination and not all.
can anyone guide me on how to go about on this authorization issue at the variable screen itself.
Please treat this issue/requirement on high priority.
Appreciated in advance.
Regards,
raps.

Hi,
I think that an alternative to solve your concern could be using Web Application Designer (WAD). In this respect, there are several design options, with different levels of complexity.
As the simplest alternative, you could create a WAD including your query and three Dropdown Boxes: one for Company, a second for Controlling area and another for Cost center. The four mentioned elements should be linked to the same dataprovider so, when you select a company, the options in the other two Dropdown boxes and the information in the query are updated.
In order to enforce mandatory filter selection at Company and Controlling area level, you should set NO_REMOVE_FILTER='X' in both two Dropdown boxes, so that "All values" option -which would mean no filtering- is not offered.
I hope this helps you.
Regards,
Maximiliano

Authorization issue - help request

Hi guys,
One of the consultants is having an authorization issue ( He is not abele to run a t-code)
I ask him to run a su53 report and i am not sure how to proceed with this.
Please help.
Here are the details from the SU53 report.
DISPLAY AUTHORIZATION DATA FOR USER VYXXXX
User : VYXXX                       profile parameter authorization buffering    4
Authorization Object: F_KNA1_GRP
Description
Authorization check failed:
      + Authorization object F_KNA1_GRP Customer Account Group Authorization
            Activity                                08
            Customer Account Group     ZM01
Users Authorization Data :
      + Authorization object F_KNA1_GRP Customer Account Group Authorization
               Authorization T-PD19002300
              Authorization T-UG39000900
              Authorization T-UG39001000
Please help me guys what need to be performed.
Regards,
Vamsi.

Hi Vamsi,
SU53 shows us the last failed authorization for a user. However, it might not only be the failed authorization object failed.
Hence, "just to learn" , you can use transaction ST01 to enable and run a trace for particular users. Be sure to use in a test environment first, and with proper filters. (for a particular user only).
Then check-> which auth object is failing.
RC=4 means a object value is failing.
RC=12 means an object is missing!
Check, which tcode is calling that object and this tcode is present in which role. Then.........proceed.
You can check the SAP documentation on running traces on the help portal of SAP. I think you will find the answer yourself by troubleshooting more and may be massaging some test roles here and there!
Likewise, if you are new to security, I would encourage you to start by reading some books on SAP security. Authorizations made easy is a good book to start with.
Let me know if you have any questions
EOD for me :P . take care
Abhishek

Authorization issue during Jump

Hi all,
I am faced with an authorization issue when I am jumping from a BW report into an ABAP report in R/3. The particular BW report is built on a Multiprovider and when I jump to the R/3 report it displays a message saying that I have no authorization to display the R/3 report. Now the issue is that when I run the same report on the base infocube and perform the jump there is no problem. It works just fine.
Both the multiprovider and the base infocube have the same authorization objects checked.
Can someone please help?
Regards,
Ashmith Roy

Pls have a look on the below thread:
Authorization by InfoArea
Regards
Ganesh
*Assign points if this helpful

Authorization issue in Info spoke

Hi all,
I am facing some authorization issue when executing info spoke in process chain.
Info spoke is working fine in direct Scheduling (both background and Dialog).
Am getting this error after execution of process chain
"System error: RSDRC / FORM AUTHORITY_CHECK RSDRC / FORM AUTHORITY_CHECK R"
"System error: RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET RSDRC / FUNC RSDRC_B"
"System error: RSDRC / FORM DATA_GET RSDRC / FORM DATA_GET RSDRC / FORM DA"
"Extraction Cube : Error in DataManager API".
I dont know why this problem comes.
Can anyone tel me what went wrong and how to solve it.
Thanks in advance.
Kind regards,
Shanbagavalli.S

Hi All,
The above issue is getting due to # character in text at end(e.g ljdfsaa##). After removing # characters in text issue got resolved.
Thansk,
Manjunatha

Authorization issue after the Support packs upgrade

We're having problem on authorization issue after the SP upgrade.
One issue if "You are not authorized to call up line item display" using FCH1 and FS10N tcodes.
And the SU53 showing problem on S_TCODE FAGLL03.
How are we going to solve this issue? We dont want to add this missing auth object on all our finance roles.
Thank you in advance.

How can i send you the trace file? What is your email address?
If I were you, I won't do that. Did you not ever sign some confidentiality agreement? I wonder.
Anyhoo... (copy right @ David)
What are the objects been caught in category RC=4, RC=12?
Relate them with functional aspect of the transaction (error screen)
Edited : You can paste RC=4, RC=12 objects here without customer specific value if you want to.
Regards,
Arpan Paik
Edited by: P Arpan on Aug 23, 2011 2:36 PM

Computer authorization issues

Similar Messages

Maybe you are looking for