Computer automatically restarting after installing iPOD

I installed my iPOD yesterday and since I did, my computer restarts after I close my browser windows. No matter what time I go on any program, after I am done doing whatever, internet, itunes, my documents, whatever, it always restarts. Whats going on? Also before I installed ipod, it would charge no problem. Now it only charges when updating files. Called tech support, no help at all. I have a 1.1 usb port. Please help. I am very disapointed. Also I have 30GB ipod.

i would recommend a usb 2 card they dont cost to much. this will more than likely be the cause of your problem

Similar Messages

Computer keeps restarting after installing windows 8

Can you help my computer keeps restarting after I installed Windows 8? I have the minidump file zipped

We do need the actual DMP file as it contains the only record of the sequence of events leading up
to the crash, what drivers were loaded, and what was responsible.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop. (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on your site, MS doesnt have this)
*Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
(Instructions for XP, Vista, Win 7, Win 8)
System specs are often useful so include whatever you know
Dyami & Wanikiya ...Team ZigZag.

Computer crashed after installing ipod software

Please, help. My Dell computer wouldn't restart after installing the software for a brand new ipod nano. I'm afraid that it's related to the software CD and I don't know how to get another one under warranty. I just want them to send me a new software CD. Any suggestions?

Not sure if this will actually solve you problem, but...
there's no need to order a new software CD.
You can download all of the necessary iPod software from Apple's website. In fact, this is often preferred over using the CD, since the website will have the latest versions, while the shipping CD might be slightly out of date.
Here's some links to download the software:
iTunes 6
iPod Updater
EDIT: Just realized I might be giving some pretty bad advice since your computer won't boot. Obviously my suggestion will only work if you have a bootable machine with Internet access.
My apologies.
Perhaps if there is an Apple store nearby, you can ask the folks there to put the software on CD for you. Even still, this might be a moot point since you don't have a working computer. You might want to reach out to Dell and get your system in a functional state before proceeding with the iTunes/iPod setup.

Mac Pro Mid 2010 keeps restarting after installing OSX Mavericks

Hello,
my Mac Pro Mid 2010 started quitting and restarting after installing the Mavericks OSX. I was thinking about wiping out the drive and reinstalling OS X Mountain Lion but thought I should see if anyone else is experiencing these issues before going that route.
It just intermittently restarts and it tries to restart multiple times before it will actually start up again. It's not issuing a crash report. It just quits out and restarts. It started doing this just at initial startup. It now will quit and restart at any given time and it will take multiple times attempting to start before it actually starts up. I've even had to shut it down because it would going through that startup sequence without starting. No perceivable pattern as to why this is occurring. No specific programs that it occurs in. The only thing I know for certain is that it started happening after installing Mavericks OSX – OSX Mountain Lion was fine. I also made sure to unistall Mountain Lion before installing Mavericks with those potential issues of trying to install one operating system over another. Any thoughts would be appreciated.
Specs for Mac Pro Mid 2010:
- 2 x 2.66 GHz 6-Core Intel Xeon
- 14 GB 1333 MHz DDR3 ECC
- ATI Radeon HD 5770 1024 MB
- OS X 10.9.2

Hello Linc,
I followed your instructions. I have information for the BOOT_TIME and for SYSTEM DIAGNOSTICS sections. I've included all within one post with heading separators between the two sections. I wasn't sure if you needed this posted as two separate posts or not. If this isn't correct, please let me know and I'll do again. Hopefully I didn't pull too much content for the BOOT_TIME section. I was trying to search for enough diverse content that would clearly represent what might be occurring. It was also challenging to choose content for the BOOT_TIME section though because there was no time-stamped content close to the time of BOOT_TIME time stamp. The last time I restarted my system was hours before I attempted your exercise. And, I haven't experienced "crashing" more than it just automatically restarts in the middle of things. I wonder if that's why there were no .crash reports? There was only a list of .panic reports so that's what I provided. Thanks for your help Linc.
STEP 1 - BOOT_TIME:
8/12/14 1:58:29.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 1:58:46.987 PM WindowServer[104]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/12/14 1:58:54.698 PM DMProxy[194]: CGSServiceForDisplayNumber: Invalid display 0x2b2840d0
8/12/14 2:00:51.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 2:00:51.000 PM kernel[0]: *** kernel exceeded 500 log message per second limit - remaining messages this second discarded ***
8/12/14 2:01:04.666 PM WindowServer[120]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/12/14 2:01:12.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=254[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
8/12/14 2:01:13.811 PM WiFiKeychainProxy[237]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
8/12/14 2:01:20.859 PM NotificationCenter[243]: Failed to mmap file. The file has zero length.
8/12/14 2:01:23.997 PM com.apple.audio.DriverHelper[279]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
8/12/14 2:01:27.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 2:15:33.763 PM quicklookd[2724]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: mp4, UTI: public.mpeg-4, fileType: ???? request size:16 scale: 1
8/12/14 2:15:39.000 PM kernel[0]: Sandbox: coreaudiod(264) deny file-read-metadata /Library/Audio/Plug-Ins/Components/UVIWorkstationAU.component
8/12/14 2:42:17.839 PM QuickLookUIHelper[2874]: *** Throwing exception err=-536870174 type=3 PlugInDevice.cpp line 81
8/12/14 2:42:17.851 PM sandboxd[145]: ([2874]) QuickLookUIHelpe(2874) deny iokit-open com_motu_driver_PCIAudio_UC
8/12/14 2:53:26.000 PM kernel[0]: firefox (map: 0xffffff803dc844b0) triggered DYLD shared region unnest for map: 0xffffff803dc844b0, region 0x7fff91200000->0x7fff91400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
8/12/14 2:55:19.376 PM plugin-container[2917]: Just logged in, send prefs down to 0 drivers
8/12/14 2:55:19.376 PM plugin-container[2917]: Adding ConsoleUID 501 to dictionary
8/12/14 2:55:21.182 PM plugin-container[2917]: CoreText performance note: Client called CTFontCreateWithName() using name "Myriad Pro" and got font with PostScript name "MyriadPro-Regular". For best performance, only use PostScript names when calling this API.
8/12/14 2:55:32.503 PM com.apple.launchd.peruser.501[200]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 10 seconds
8/12/14 2:55:32.960 PM plugin-container[2917]: PlugInDevice::~PlugInDevice
8/12/14 2:55:33.790 PM WindowServer[120]: CGXGetConnectionProperty: Invalid connection 63027
8/12/14 2:55:33.807 PM com.apple.launchd[1]: (com.apple.MailServiceAgent[2714]) Exited: Killed: 9
8/12/14 2:55:33.812 PM loginwindow[80]: ERROR | -[Application setAppContext:] | Unable to get PID for context [0,118813]
8/12/14 2:55:33.814 PM com.apple.launchd[1]: (com.apple.ShareKitHelper[282]) Exited: Killed: 9
8/12/14 2:55:33.816 PM com.apple.launchd.peruser.501[200]: ([0x0-0x27027].com.apple.AppleSpell[2673]) Exited: Killed: 9
8/12/14 2:55:33.886 PM Core Sync[373]: NSDistantObject (0x1088026a0) is invalid (no connection)
8/12/14 2:55:34.305 PM sessionlogoutd[2929]: sessionlogoutd Launched
8/12/14 2:55:34.314 PM sessionlogoutd[2929]: DEAD_PROCESS: 80 console
8/12/14 2:55:34.335 PM fseventsd[86]: Events arrived for /Volumes/Mac OS X Install ESD after an unmount request! Re-initializing.
8/12/14 2:55:34.335 PM fseventsd[86]: creating a dls for /Volumes/Mac OS X Install ESD but it already has one...
8/12/14 2:55:34.612 PM shutdown[2930]: halt by _coreaudiod:
8/12/14 2:55:34.000 PM kernel[0]: Kext loading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kext unloading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kext autounloading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kernel requests now disabled.
8/12/14 2:55:34.612 PM shutdown[2930]: SHUTDOWN_TIME: 1407880534 611700
8/12/14 2:55:34.625 PM Creative Cloud[252]: XPC error messaging com.apple.IconServicesAgent: Connection invalid
8/12/14 7:30:33.000 PM bootlog[0]: BOOT_TIME 1407897033 0
STEP 2 - SYSTEM DIAGNOSTIC REPORT:
Tue Aug 12 19:30:48 2014
panic(cpu 0 caller 0xffffff801f8dc24e): Kernel trap at 0xffffff801fc51e48, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff803f930ec0, CR3: 0x0000000022630000, CR4: 0x00000000000206e0
RAX: 0xffffff803ebc9f80, RBX: 0x0000000000000070, RCX: 0xffffff801ff034d0, RDX: 0xffffff803f915588
RSP: 0xffffff81c98d3c10, RBP: 0xffffff81c98d3c40, RSI: 0x0000000000010002, RDI: 0x0000000000000001
R8: 0x0000000000000000, R9: 0x0000000000000039, R10: 0xffffff801ff03770, R11: 0x0000007e3672c41b
R12: 0xffffff801ff034d0, R13: 0xffffff803f8dc2c0, R14: 0xffffff803f915580, R15: 0xffffff803f930ec0
RFL: 0x0000000000010286, RIP: 0xffffff801fc51e48, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff803f930ec0, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81c98d38a0 : 0xffffff801f822f79
0xffffff81c98d3920 : 0xffffff801f8dc24e
0xffffff81c98d3af0 : 0xffffff801f8f3746
0xffffff81c98d3b10 : 0xffffff801fc51e48
0xffffff81c98d3c40 : 0xffffff801fc8bffe
0xffffff81c98d3c80 : 0xffffff801fc8c1fd
0xffffff81c98d3cb0 : 0xffffff7fa01e49aa
0xffffff81c98d3ce0 : 0xffffff7fa01e48dc
0xffffff81c98d3d10 : 0xffffff7fa0144068
0xffffff81c98d3d70 : 0xffffff7fa0142c85
0xffffff81c98d3da0 : 0xffffff7fa0141646
0xffffff81c98d3dd0 : 0xffffff7fa01bfc43
0xffffff81c98d3e20 : 0xffffff7fa0140b8b
0xffffff81c98d3e50 : 0xffffff801fc956ef
0xffffff81c98d3ea0 : 0xffffff801fc952af
0xffffff81c98d3f30 : 0xffffff801fc90e89
0xffffff81c98d3f70 : 0xffffff801fc95e03
0xffffff81c98d3fb0 : 0xffffff801f8d7417
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAudioFamily(1.9.7f2)[092DA230-DD20-3369-A32B-E162A496C638]@0x ffffff7fa013d000->0xffffff7fa016bfff
            dependency: com.apple.kext.OSvKernDSPLib(1.14)[7C60EDB3-7527-3412-B424-C9A667A65B92]@0xffff ff7fa012b000
         com.motu.driver.PCIAudio(1.6)[00000000-0000-0000-0000-000000000000]@0xffffff7fa 01be000->0xffffff7fa0223fff
            dependency: com.apple.iokit.IOAudioFamily(1.9.7fc2)[092DA230-DD20-3369-A32B-E162A496C638]@0 xffffff7fa013d000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f9febe000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide:     0x000000001f600000
Kernel text base: 0xffffff801f800000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 26153387208
last loaded kext at 18269508545: com.apple.driver.AppleMikeyHIDDriver    124 (addr 0xffffff7fa10fa000, size 20480)
loaded kexts:
com.Cycling74.driver.Soundflower    1.5.1
com.motu.driver.PCIAudio    1.6 58373
com.apple.driver.AppleMikeyHIDDriver    124
com.apple.driver.AppleMikeyDriver    2.6.3f4
com.apple.driver.AppleHDAHardwareConfigDriver    2.6.3f4
com.apple.driver.AppleHDA    2.6.3f4
com.apple.driver.AudioAUUC    1.60
com.apple.driver.AppleUpstreamUserClient    3.5.13
com.apple.driver.AppleMCCSControl    1.2.5
com.apple.kext.AMDFramebuffer    1.2.4
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothUSBDFU    4.2.6f1
com.apple.AMDRadeonX3000    1.2.4
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.6f1
com.apple.driver.AppleHWAccess    1
com.apple.driver.AppleLPC    1.7.0
com.apple.kext.AMD5000Controller    1.2.4
com.apple.driver.AppleIntelMCEReporter    104
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.6.0
com.apple.iokit.SCSITaskUserClient    3.6.6
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    35
com.apple.driver.AppleUSBHub    683.4.0
com.apple.driver.AppleFWOHCI    5.0.2
com.apple.driver.Intel82574L    2.6.2b1
com.apple.driver.AirPort.Brcm4331    700.20.22
com.apple.driver.AppleAHCIPort    3.0.5
com.apple.driver.AppleUSBEHCI    660.4.0
com.apple.driver.AppleUSBUHCI    656.4.1
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleACPIButtons    2.0
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleACPIEC    2.0
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    217.92.1
com.apple.nke.applicationfirewall    153
com.apple.security.quarantine    3
com.apple.driver.AppleIntelCPUPowerManagement    217.92.1
com.apple.driver.DspFuncLib    2.6.3f4
com.apple.vecLib.kext    1.0.0
com.apple.iokit.IOSurface    91.1
com.apple.iokit.IONDRVSupport    2.4.1
com.apple.iokit.IOBluetoothFamily    4.2.6f1
com.apple.iokit.IOAcceleratorFamily    98.22
com.apple.driver.AppleSMBusController    1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.6f1
com.apple.driver.AppleHDAController    2.6.3f4
com.apple.iokit.IOHDAFamily    2.6.3f4
com.apple.iokit.IOFireWireIP    2.2.6
com.apple.driver.AppleSMBusPCI    1.0.12d1
com.apple.iokit.IOAudioFamily    1.9.7fc2
com.apple.kext.OSvKernDSPLib    1.14
com.apple.kext.AMDSupport    1.2.4
com.apple.AppleGraphicsDeviceControl    3.6.22
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.driver.AppleSMC    3.1.8
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.IOPlatformPluginFamily    5.7.1d6
com.apple.driver.AppleUSBHIDKeyboard    170.15
com.apple.driver.AppleHIDKeyboard    170.15
com.apple.iokit.IOUSBHIDDriver    660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.6.6
com.apple.iokit.IOUSBMassStorageClass    3.6.0
com.apple.driver.AppleUSBMergeNub    650.4.0
com.apple.driver.AppleUSBComposite    656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.6
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.6
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IOUSBUserClient    660.4.2
com.apple.iokit.IO80211Family    640.36
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOAHCIFamily    2.6.5
com.apple.iokit.IOUSBFamily    683.4.0
com.apple.driver.AppleEFINVRAM    2.0
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    278.11.1
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.AppleKeyStore    2
com.apple.driver.DiskImages    371.1
com.apple.iokit.IOStorageFamily    1.9
com.apple.iokit.IOReportFamily    23
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    2.0
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
com.apple.kec.pthread    1

Can't burn blank CD after installing ipod software

Can't burn blank CD after installing ipod software - I have the system prefs set to launch Toast 6 when inserting a blank disk, and the drive just churns and then ejects the CD. It mounts and runs burned music and data disks with no problem.
My job requires me to burn data disks from pictures I take at work. Should I re-install Toast? The OS? I ran Disk Utility to check/fix permissions, and no change.

The CD that came with the nano won't have anything on it that you won't get with a full iTunes install. In fact, it may have been an OLDER version of the iTunes software than what you had installed before.
I'd reccomend downloading the latest version of iTunes from Apple and installing that to rule out software reversion issues.
If the problem still exists, try booting into toast before inserting the blank disk and see if Toast can still burn to the CD. If it can, then odds are you have to re-instruct your computer to boot toast when a blank CD is inserted. If it can't see the blank CD, or the Finder spits it out again, then I think you'd have to re-install Toast.
Doc

MBP will not shut off or restart after installing lion.

MBP will not shut off or restart after installing lion. I tried installing the latest update but since it will not restart the update will not work.

Everything works except it will not shut down or restart so I can't update it.
I run the Adobe master creative suite collection, Microsoft office and countless other software products without a hitch.
After I click on update software then download the apple update for lion it says I have to restart the computer to finnish the install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

MacBook Air won't restart after installing Mavericks

My MacBook Air (v Fall 2011) won't restart after installing Mavericks. I have done the instal several times, done the disk repair, I have had 2 visits to the local Apple store where they installed Mavericks with their software only to return home and have it fail again. Does anyone know of issues with the SSD or memory?
Next visit to the Apple store is Tuesday morning 12-17-13. Anywthing that can help us would be appreciated. Tks David

Ok. Nevermind. I guess I had to Force Quit/Relaunch Finder.

"the computer was restarted after mac os x quit" followed by Kernel Panic

Running an Intel IMac 8,1. I think I'm running 10.5.5, but I'm not 100% sure.
Every time I start my computer pops up a display saying "the computer was restarted after mac os x quit" ignore/report.....and before I can click either, Kernel Panic happens.
I've tried hardware test and utilities/repair and neither works. Going to try to loop hardware test it over night.
I'm also at a loss as to how to get the log file and post it. I can connect it to a laptop, so if there is some way to do it that way, please let me know.
Thank you for any help.

I got into my computer by booting into safe mode, so here's a ton of information and I hope some of it is useful.
A apologize if the formatting is wrong, I'm going from Mac to PC. Also, turns out my computer is running 10.5.4.
*Console Message*
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** /dev/rdisk0s2
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Root file system
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Journaled HFS Plus volume.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Extents Overflow file.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Catalog file.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] Incorrect block count for file pcscd.pub
1/19/09 11:07:29 PM com.apple.launchctl.System[2] (It should be 16 instead of 17)
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking multi-linked files.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Catalog hierarchy.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Extended Attributes file.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking volume bitmap.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking volume information.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Repairing volume.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Rechecking volume.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Journaled HFS Plus volume.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Extents Overflow file.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Catalog file.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking multi-linked files.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Catalog hierarchy.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Extended Attributes file.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking volume bitmap.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking volume information.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** The volume Macintosh HD was repaired successfully.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] *** FILE SYSTEM WAS MODIFIED ***
1/19/09 11:07:31 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
1/19/09 11:07:31 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
1/19/09 11:07:31 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
1/19/09 11:07:48 PM org.ntp.ntpd[31] Error : nodename nor servname provided, or not known
1/19/09 11:07:55 PM com.apple.SystemStarter[33] Starting Qmaster services
1/19/09 11:08:06 PM com.apple.loginwindow[38] Mon Jan 19 23:08:06 john-sklbas-imac.local loginwindow[38] <Warning>: CGSShutdownServerConnections: Detaching application from window server
1/19/09 11:08:06 PM com.apple.loginwindow[38] Mon Jan 19 23:08:06 john-sklbas-imac.local loginwindow[38] <Warning>: CGSDisplayServerShutdown: Detaching display subsystem from window server
1/19/09 11:08:08 PM com.apple.ATSServer[83] FODBCheck: New annex file created
1/19/09 11:08:57 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[94]) Exited: Terminated
1/19/09 11:28:03 PM com.apple.loginwindow[38] Shutdown NOW!
1/19/09 11:28:03 PM com.apple.loginwindow[38] System shutdown time has arrived
1/19/09 11:28:03 PM com.apple.SystemStarter[33] Shutting down Qmaster processes
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** /dev/rdisk0s2
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Root file system
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Journaled HFS Plus volume.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Extents Overflow file.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Catalog file.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] Incorrect block count for file pcscd.pub
1/19/09 11:35:54 PM com.apple.launchctl.System[2] (It should be 16 instead of 17)
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking multi-linked files.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Catalog hierarchy.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Extended Attributes file.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking volume bitmap.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking volume information.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Repairing volume.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Rechecking volume.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Journaled HFS Plus volume.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Extents Overflow file.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Catalog file.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking multi-linked files.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Catalog hierarchy.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Extended Attributes file.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking volume bitmap.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking volume information.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** The volume Macintosh HD was repaired successfully.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] *** FILE SYSTEM WAS MODIFIED ***
1/19/09 11:35:56 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
1/19/09 11:35:56 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
1/19/09 11:35:56 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
1/19/09 11:36:13 PM org.ntp.ntpd[31] Error : nodename nor servname provided, or not known
1/19/09 11:36:19 PM com.apple.SystemStarter[33] Starting Qmaster services
1/19/09 11:36:33 PM com.apple.ATSServer[84] FODBCheck: New annex file created
1/19/09 11:37:04 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[94]) Exited: Terminated
1/19/09 11:37:29 PM SyncServer[154] SyncServer: Reaping records for inactive clients. Next reap on 2009-03-05 23:37:29 -0500
1/19/09 11:37:29 PM [0x0-0x13013].SoftwareUpdateCheck[156] SoftwareUpdateCheck: network unreachable
1/19/09 11:37:29 PM com.apple.launchd[116] ([0x0-0x13013].SoftwareUpdateCheck[156]) Exited with exit code: 3
1/19/09 11:37:56 PM Problem Reporter[161] ERR GetChild: 268435459
1/19/09 11:39:10 PM quicklookd[176] [QL ERROR] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Sequence 1-juvi center 2-MPEG-2 6.2Mbps 2-pass.m2v>'
1/19/09 11:39:20 PM quicklookd[178] [QL ERROR] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Sequence 1-juvi center 2-MPEG-2 6.2Mbps 2-pass.m2v>'
WDBMService2009-01-19-230900john-sklbas-imac
Process: WDBMService [81]
Path: /Library/StartupItems/WDBMService/WDBMService
Identifier: WDBMService
Version: ??? (???)
Code Type: PPC (Translated)
Parent Process: launchd [1]
Date/Time: 2009-01-19 23:09:00.983 -0500
OS Version: Mac OS X 10.5.4 (9E17)
Report Version: 6
Exception Type: EXC_CRASH (SIGTRAP)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 ??? 0x801a308a 0 + 2149200010
1 translate 0xb80b6b00 0xb8000000 + 748288
2 translate 0xb80b7007 0xb8000000 + 749575
3 translate 0xb80d49c0 0xb8000000 + 870848
4 translate 0xb813ce79 spinlockwrapper + 1981
Thread 1:
0 translate 0xb8152c24 spinlockwrapper + 91496
1 translate 0xb81714a8 CallPPCFunctionAtAddressInt + 95812
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d4d41 0xb8000000 + 871745
5 translate 0xb813d014 spinlockwrapper + 2392
6 translate 0xb8153bba spinlockwrapper + 95486
7 ??? 0x800ed6f5 0 + 2148456181
8 ??? 0x800ed5b2 0 + 2148455858
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xb80b6c78 ecx: 0xb7fff9ac edx: 0x801a308a
edi: 0xb8208980 esi: 0x00000005 ebp: 0xb7fff9d8 esp: 0xb7fff9ac
ss: 0x0000001f efl: 0x00000246 eip: 0x801a308a cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x802947bd
Binary Images:
0xb8000000 - 0xb81d7fe7 translate ??? (???) /usr/libexec/oah/translate
Translated Code Information:
NO CRASH REPORT
& Finally the Problem report & System config
*Problem Report*
Mon Jan 19 23:36:12 2009
panic(cpu 0 caller 0x001694C6): "vmmapunwire: entry is unwired"@/SourceCache/xnu/xnu-1228.5.20/osfmk/vm/vm_map.c:4110
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x342efdf8 : 0x12b0fa (0x4592a4 0x342efe2c 0x133243 0x0)
0x342efe48 : 0x1694c6 (0x45c20c 0x358f8000 0x0 0x342eff0c)
0x342eff28 : 0x2e4b9328 (0x35908000 0x0 0x0 0x0)
0x342effc8 : 0x19ebdc (0x0 0x0 0x1a20b5 0x3cc1c80)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.BootCache(30)@0x2e4b7000->0x2e4bbfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9E17
Kernel version:
Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
System model name: iMac8,1 (Mac-F226BEC8)
*SYSTEM CONFIG*
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.66 GHz, 2 GB
Graphics: kHW_ATIr600M76plusItem, ATI Radeon HD 2600 Pro, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (4.170.46.9)
Bluetooth: Version 2.1.0f17, 2 service, 1 devices, 0 incoming serial ports
Serial ATA Device: WDC WD3200AAJS-40VWA1, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
USB Device: Keyboard Hub, Apple, Inc., high_speed, 500 mA
USB Device: Apple Optical USB Mouse, Mitsumi Electric, low_speed, 100 mA
USB Device: USB Reader, high_speed, 100 mA
USB Device: Apple Keyboard, Apple, Inc, low_speed, 100 mA
USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA
USB Device: BCM2045B2, Broadcom, full_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA

I accidently pulled the cable out when syncing. Now my ipod automatically restarts after a few seconds. What do I do?

Please help
I accidently pulled the cable out when syncing. Now my ipod automatically restarts. What do i do?

OK, in that case a restore should fix things:
Disconnect the USB cable from the iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected an iPod in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.

My laptop dv6008eo was been automatic restart after i had installed new memory card

it was used So DDR 3 pc 10600 4GB 1333MHz and working good, i replaced So DDR 3 pc 10666 elite Team 4 GB 1333MHz ,it restart automatic and only restarting after ......what happen?
help me solv this problem

Hi:
PC3-10666/10660 memory normally does not work in HP notebooks.
You need to stick with PC3-10600 or PC3-12800 (which will downclock to 1333 MHz).
Paul

Must restart after installing firefox and kde...WHY????

Every time I set up an arch box, when I install firefox or kde (probably others) I must restart the computer before I can even execute them. This is mighty inconvenient and un-linux-like, I noticed that during the bootup, the Updating Shared Library Links takes a little longer after installing firefox or kde, is there a command I can run that does this after installing firefox or kde that dosen't require me to restart?

stonecrest wrote:
phrakture wrote:You can also just "source /etc/profile" - but that won't help your window manager or anything
I wish pacman or the .install files would check to see if /opt/foo, the path that the package was just installed to, is in $PATH and automatically source /etc/profile if it's not. I swear this is a top 10 question from users and rightfully so, they shouldn't have to deal with this. In my humble opinion.
I'm pretty sure most do - however, that only sources it for root, not the user running - I have no idea, off the top of my head, if this works correctly under sudo.
However, the important part is that your WM/DE is running under a totally different environment setup, and the 'export' stuff does not reach it.
I can't really think of a good way to get around it - I know it's rather irritating to some people. I wonder if adding something like "/opt/*/bin" to the PATH by default would work... I don't think it globs properly though...

Can no longer open my itunes after installing ipod software...help?!

I received an ipod nano for Christmas. After installing the cd into my computer to download the software, nothing seemed to happen. There is no icon on my desk top. Not only that, I can no longer open up my itunes. There is no error message either. When I click on the itunes icon, nothing happens at all. Can someone help get my itunes back???

try these articles and come back if they dont help
http://docs.info.apple.com/article.html?artnum=302538
http://docs.info.apple.com/article.html?artnum=302775
http://docs.info.apple.com/article.html?artnum=93976

Bluetooth Keyboard/Mouse/Trackpad won't automatically connect after installing Boot Camp

Hey guys!
Another peculiar thing happened to me today with my 3-week-old maxed-out 2012 iMac (other than it kernel panicking when I powered it down the other day...did I mention this was 3 weeks old?).
After installing Boot Camp which I will never do again, my iMac (on the OS X side) no longer recognizes my stock Apple Wireless Keyboard, Magic Trackpad, or Magic Mouse automatically, until I press a button on the keyboard and wait 5 seconds, click the trackpad and wait 5 seconds, or click the mouse and wait 5 seconds.
(The Windows 8 Boot Camp side pairs with the devices immediately after Windows boots, which leads me to believe that the bluetooth devices are defaulting to look for Windows.)
One of my huge fears I had when considering purchasing an iMac is that the Bluetooth devices wouldn't immediately connect. Being a power-user with former Mac notebooks and working understandably fast having owned a web development company for 8 years now and not having to worry about Bluetooth device pairing, I'd like to think this fear is substantiated. But after first use (before installing Windows 8 with Boot Camp Assistant) it functioned normally and the iMac would automatically discover my peripherals and connect them by the time time computer turned on. I also had no trouble holding the Option key on boot to select a boot device....
Now, ever since I set up Windows 8 on the Boot Camp partition and paired the keyboard/mouse/trackpad to Windows, the Mac side completely ignores the keyboard/mouse/trackpad until I click a button on each.
I'm trying to keep it together but this is raging me out.
I went into Windows, immediately unpaired the 3 peripherals from windows and now use a wired keyboard/mouse with Windows (yay, desk space!), deleted the items entirely from the bluetooth panel, then booted to Mac and did the same thing. I then re-paired the devices to the OS X side andddd...no go! Still doesn't find them automatically. I am extremely upset by this and can't seem to fix it.
To summarize, my two issues are:
A. The iMac in OS X does not automatically recognize my bluetooth peripherals until I click a button on each and wait a couple seconds for them to pair.
B. I cannot hold Option to select a boot device (or choose Windows/Mac for example) because the computer doesn't recognize the keyboard until OS X boots and I press a key.
Please...for the love of god...someone help me, and stop me from formatting my entire computer over this issue.

I don't have a logitech mouse, but is it possible that the mouse is going to sleep during the reboot, and is thus unavailable when the OS is looking for it?

Windows 7 Freezes at Restart After Installing Boot Camp Drivers

Hi,
I have a MacBook Pro and am having troubles installing 32-Bit Windows 7. All seems to be functional until I install the Boot Camp drivers included on the Install Disk. I have tried using the Boot Camp 3.1 update, but the same problem occurs. After the computer freezes on the install page, I can no longer access Windows (even in Safe Mode) and am forced to restart the entire process (that is, repartition the hard drive and reinstall Windows).
If I don't install the Boot Camp drivers, Windows seems to be functional, so I'm pretty sure it's something in the Boot Camp package causing the trouble.
Is anyone else having this problem? Any ideas or workarounds?

I finally got it to work. You need to go to the NVidia website and install their drivers. I think the Apple supplied ones are out of date and are causing Windows to hang. Install Boot Camp from the supplied DVD, install the update that Apple supplies through the newly installed Boot Camp, and then go to the NVidia website to manually download the drivers. I used the GeForce 300M series installer. Make sure you do all of this before letting Windows restart.
I had a few issues with it hanging a few times, but once I was able to get into Windows it seems to be working. All of the other Apple supplied drivers seem to work.

Computer automatically restarting after installing iPOD

Similar Messages

Maybe you are looking for