Computer Browser Service disabled on DCs
I have 2 DCs...
1) Physical Server 2012 - GC, DNS Integrated, DHCP
2) Virtual Server 2012 - GC, DNS Integrated, DHCP, FSMO, RID Master, PDC Master, Infrastructure Master
While troubleshooting network browsing on a 2003 server, I noticed that the Computer Browser service is disabled on both these DCs. Is this right? We do have some computers that are workgroup only.
Hello,
the Computer browser service is still the same on the OS versions. See here why it is disabled and where to enable the service if NetBios is required.
http://blogs.technet.com/b/networking/archive/2008/07/25/netbios-browsing-across-subnets-may-fail-after-upgrading-to-windows-server-2008.aspx
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:
Similar Messages
-
Question about configuring Computer Browser service
On network computers after the net view command displayed different lists of computers.
All computers are in the same domain. OS: Windows Server 2012, 2012R2, Windows 8, 8.1. On all computers except domain controllers and another server using Group Policy disabled Computer Browser service. I can not understand why the
net view command provides different lists of computers.
I can provide more detailed information.Hi,
The NetBIOS will be discard in the future it recommend you use DNS name resolution, in your case if the NetBIOS based name resolution is necessary it recommend you create
a WIN server.
In a Windows NT domain structure, the primary domain controller (PDC) is always selected as the domain master browser. Only the PDC can be a domain master browser. If a PDC
is not present, a domain master browser is not available and you are unable to obtain browse lists from workgroups other than the workgroup you are located in.
With the multi subnet you must configure your router to allow the WINS related protocol through the different subnet.
The related third party information:
How to Enable Browsing Using NetBIOS Over IP
http://www.cisco.com/c/en/us/support/docs/additional-legacy-protocols/ms-windows-networking/17057-Netbios.html
The related KB:
Description of the Microsoft Computer Browser Service
http://support.microsoft.com/kb/188001/en-us
You cannot view other workgroup computers on the network on a Windows XP-based computer
http://support.microsoft.com/kb/903267/en-us
NetBIOS over TCP/IP Name Resolution and WINS
http://support.microsoft.com/kb/119493/en-us
The similar thread:
member of both Workgroup and Domain?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/2ead7337-e0ee-49ed-a5a7-724157c22c74/member-of-both-workgroup-and-domain?forum=winserverNIS
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Cisco UNITY Failover Configuration with no Computer Browser Service
Hi,
Actually i'm configuring a unity failover server with version 7, at this point i'm triyng to add the failover server thru the failover configuration wizard which should list the failover server, but in this customer as a domain policy the computer browser service is disabled, reason why the failover server does not appear on the list of computers.
Does any one have any idea on how to deal with this issue?
Thanks.Javier,
You can follow the steps here:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsy40909
Hope that helps,
Brad -
Not working properly Computer Browser service in Windows Server 2012
Good afternoon.
Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
all.
Looked packet sniffer:
Microsoft Windows Lanman Remote API Protocol
Entry Count: 70
Available Entries: 251
So on Master Browser shows 251 computer, and the client 70.
If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
- Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
- DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
- SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
EthernetType: Internet IP (IPv4), 2048(0x800)
- Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
- Versions: IPv4, Internet Protocol; Header Length = 20
Version: (0100....) IPv4, Internet Protocol
HeaderLength: (....0101) 20 bytes (0x5)
- DifferentiatedServicesField: DSCP: 0, ECN: 0
DSCP: (000000..) Differentiated services codepoint 0
ECT: (......0.) ECN-Capable Transport not set
CE: (.......0) ECN-CE not set
TotalLength: 168 (0xA8)
Identification: 14025 (0x36C9)
- FragmentFlags: 16384 (0x4000)
Reserved: (0...............)
DF: (.1..............) Do not fragment
MF: (..0.............) This is the last fragment
Offset: (...0000000000000) 0
TimeToLive: 128 (0x80)
NextProtocol: TCP, 6(0x6)
Checksum: 0 (0x0)
SourceAddress: 10.44.46.101
DestinationAddress: 10.44.44.14
- Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
SrcPort: 65372
DstPort: NETBIOS Session Service(139)
SequenceNumber: 1910965363 (0x71E70473)
AcknowledgementNumber: 580319796 (0x2296FA34)
- DataOffset: 80 (0x50)
DataOffset: (0101....) 20 bytes
Reserved: (....000.)
NS: (.......0) Nonce Sum not significant
- Flags: ...AP...
CWR: (0.......) CWR not significant
ECE: (.0......) ECN-Echo not significant
Urgent: (..0.....) Not Urgent Data
Ack: (...1....) Acknowledgement field significant
Push: (....1...) Push Function
Reset: (.....0..) No Reset
Syn: (......0.) Not Synchronize sequence numbers
Fin: (.......0) Not End of data
Window: 252 (scale factor 0x8) = 64512
Checksum: 0x6F65, Disregarded
UrgentPointer: 0 (0x0)
TCPPayload: SourcePort = 65372, DestinationPort = 139
- Nbtss: SESSION MESSAGE, Length =124
PacketType: SESSION MESSAGE, 0(0x00)
- Flags: Add 0 to Length
Reserved: (0000000.)
Extension: (.......0)Add 0 to Length
Length: 124(0x7C)
- SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
Protocol: SMB
Command: Transaction 37(0x25)
- NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
Code: (................0000000000000000) (0) STATUS_SUCCESS
Facility: (...0000000000000................) FACILITY_SYSTEM
Customer: (..0.............................) NOT Customer Defined
Severity: (00..............................) STATUS_SEVERITY_SUCCESS
- SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
- Flags: 24 (0x18)
LockAndRead: (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
NoAck: (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
Reserved_bit2: (.....0..) Reserved (Must Be Zero)
CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
Canonicalized: (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
Oplock: (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
OplockNotify: (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
FromServer: (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
- Flags2: 51207 (0xC807)
KnowsLongFiles: (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
KnowsEas: (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
SmbSecuritySignature: (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
Compressed: (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
Reserved_bit5: (..........0.....) Reserved (Must Be Zero)
IsLongName: (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
Reserved_bits7_9: (......000.......) Reserved (Must Be Zero)
ReparsePath: (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
ExtendedSecurity: (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
Dfs: (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
Paging: (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
NTStatus: (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
Unicode: (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
PIDHigh: 0 (0x0)
SecuritySignature: 0x0
Unused: 0 (0x0)
TreeID: 8193 (0x2001)
ProcessID: 10092 (0x276C)
UserID: 14337 (0x3801)
MultiplexID: 320 (0x140)
- CTransaction:
WordCount: 14 (0xE)
TotalParameterCount: 32 (0x20)
TotalDataCount: 0 (0x0)
MaxParameterCount: 8 (0x8)
MaxDataCount: 4200 (0x1068)
MaxSetupCount: 0 (0x0)
Reserved: 0 (0x0)
- Flags: Do NOT disconnect TID
Disconnect: (...............0) Do NOT disconnect TID
NoResponse: (..............0.) Server response to the client
Reserved: (00000000000000..) Reserved
Timeout: 5000 milli sec(s)
Reserved2: 0 (0x0)
ParameterCount: 32 (0x20)
ParameterOffset: 92 (0x5C)
DataCount: 0 (0x0)
DataOffset: 0 (0x0)
SetupCount: 0 (0x0)
Reserved3: 0 (0x0)
ByteCount: 61 (0x3D)
- RemoteAPIBuffer:
- FileName: \PIPE\LANMAN
- Align: 1 Bytes
AlignBytes: Binary Large Object (1 Bytes)
Name: \PIPE\LANMAN
Pad1: Binary Large Object (2 Bytes)
- RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
RAPOpcode: NetServerEnum2
- ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
Param: (W) WORD (send parameter, 16 bit integer)
Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
Param: (e) Entries read (receive data, 0 bit integer)
Param: (h) WORD (receive parameter, 16 bit integer)
Param: (D) DWORD (send parameter, 32 bit integer)
Param: (z) ASCIIZ (send parameter, 8 bit integer)
Param: ASCII NUL (string terminator)
- DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
- Datum: (B) BYTE[16] (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Digit: 1
Digit: 6
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (D) DWORD (receive data, 32 bit integer)
Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
Datum: ASCII NUL (string terminator)
- NetServerEnum2: SV_TYPE_ALL: All in NSNET
InfoLevel: (1) SERVER_INFO_1
ReceiveBufferSize: 4200 (0x1068)
- ServerType: SV_TYPE_ALL: All
Workstation: (...............................1) All workstations
Server: (..............................1.) All computers with the server service running
Sqlserver: (.............................1..) All running Microsoft SQL Server
DomainCtrl: (............................1...) All primary domain controllers
DomainBakctrl: (...........................1....) All backup domain controllers
TimeSource: (..........................1.....) All Time servers
AFP: (.........................1......) All Apple File Protocol servers
Novell: (........................1.......) All Novell servers
DomainMember: (.......................1........) All LAN Manager 2.x domain members
PrintqServer: (......................1.........) All print servers
DialinServer: (.....................1..........) All dial-in servers
ServerUnix: (....................1...........) All Unix/Xenix servers
NT: (...................1............) All Windows NT workstations or servers
WFW: (..................1.............) All Windows for Workgroups servers
ServerMFPN: (.................1..............) All Microsoft File and Print for NetWare servers
ServerNT: (................1...............) All non-domain controller servers
PotentialBrowser: (...............1................) All servers that can run the browser service
BackupBrowser: (..............1.................) All backup browsers
MasterBrowser: (.............1..................) All master browsers
DomainMaster: (............1...................) All domain master browsers
Reserved1: (..........11....................)
Windows: (.........1......................) All Windows 95 or later
DFS: (........1.......................) All DFS root servers
ClusterNT: (.......1........................) All NT Clusters
Terminalserver: (......1.........................) All Terminal Servers
ClusterVSNT: (.....1..........................) All NT Cluster Virtual Server Names
DCE: (....1...........................) AllIBM DSS (Directory & Security Services)
Reserved2: (...1............................)
AlternateXport: (..1.............................) Return list for alternate transport
LocalListOnly: (.1..............................) Return local list only
DomainEnum: (1...............................) Enumerate primary domain
Domain: NSNET
Then the reply;
Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
+ Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
+ Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
+ Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
+ Nbtss: SESSION MESSAGE, Length =2013
+ SMB: R; Transaction, Remote Administration Protocol
- RAPResponse: NetServerEnum2 Response, Count = 31
Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
Converter: 2251 (0x8CB)
- NetServerEnum2: Count = 31
EntriesReturned: 31 (0x1F)
EntriesAvailable: 31 (0x1F)
+ NetServerInfo1: APOLLO
+ NetServerInfo1: ARTEMIS
+ NetServerInfo1: ASKLEPIOS
+ NetServerInfo1: CASTOR
+ NetServerInfo1: DCC4503-131L
+ NetServerInfo1: DCC4503-155L
+ NetServerInfo1: DCC4503-157L
+ NetServerInfo1: DCC4503-161L
+ NetServerInfo1: DCC4503-171L
+ NetServerInfo1: DCC4503-172L
+ NetServerInfo1: DCC4503-175L
+ NetServerInfo1: DCC4503-177L
+ NetServerInfo1: DCC4503-183L
+ NetServerInfo1: DCC4503-184L
+ NetServerInfo1: DCC4503-185L
+ NetServerInfo1: DCC4503-188L
+ NetServerInfo1: DCC4503-196L
+ NetServerInfo1: DCC4503-197L
+ NetServerInfo1: DCC4503-199L
+ NetServerInfo1: DCC4503-202L
+ NetServerInfo1: DCC4503-203L
+ NetServerInfo1: DCC4503-205L
+ NetServerInfo1: DCC4503-210L
+ NetServerInfo1: DCC4503-213L
+ NetServerInfo1: DCC4503-219L
+ NetServerInfo1: DCC4503-220L
+ NetServerInfo1: DCC4503-228L
+ NetServerInfo1: DCC4503-233L
+ NetServerInfo1: DCC4503-234L
+ NetServerInfo1: DCC4503-236L
+ NetServerInfo1: DCC4503-241L
StringData: Binary Large Object (586 Bytes) -
Question about Master Browser service and computer browsing across subnets
So i have a client that has a domain controller functioning as a DNS, WINS, and DHCP client for their two site network. They are "too busy" to actually migrate to the domain we set
them up from a workgroup configuration despite my assurances of a simple change over with virtually no user interruption.
They do however still want windows computer browsing services across their vpn tunnel between the two sites. Ive been pulling my hair out trying to get this done, but im starting to think its
just not possible without migrating to the domain. Any ideas?
The server is windows 2012 r2 standard and all the machines are on windows 7 professionalHi,
You can enable computer browsing service on workgroup computers, but as browser service is bound by broadcast segments, a cross-site computer browsing service will not work without primary domain controller (PDC).
See:
Description of the Microsoft Computer Browser Service
http://support.microsoft.com/kb/188001
If you have any feedback on our support, please send to [email protected] -
Windows Update Service Disabled - Error 80070422
Hi,
On Windows Vista Ultimate SP1, when I go to Windows Update I see a "Check For Updates" button. When I click it I get an 80070422 error and "Try Again" button which does not work.
I have tried all that is explained in Help on this error, but it's still not working. Let me write in more detail: I opened "Administrative Tools", went to "Services", "Windows Update" service is disabled. I set the "Startup Type" to "Automatic", click on Apply and then I click the "Start" button to start the service. I get an error: 1058: "Windows could not start the Windows Update service on Local Computer", "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it".
I downloaded "WindowsUpdateAgent30-x86.exe" and installed it, hoping that the problem will be fixed, but no luck.
I read somewhere on this forum that a user faced a similar problem and searched in "Windows\System32" for "wu*.*" files and changed the security settings for all of them to allow SYSTEM and Administrators full control and re-registered through "regsvr32" all of the .dll files, but, after doing all of these I still had no luck.
My Windows Update still displays the error 80070422 and when I try to start the Windows Update service I get the error that the service cannot be started and it always sets itself on "Disabled", no matter what I do.
Could someone please help me with this problem? I really don't know what else to do.Wow, great!
I ran the tool that you mentioned and the virus in question was detected as: Trojan.Vundo
Maybe the logs will help some others, too: Here's the log on the first scan:
Malwarebytes' Anti-Malware 1.14
Database version: 808
8:40:22 PM 5/31/2008
mbam-log-5-31-2008 (20-40-22).txt
Scan type: Full Scan (C:\|D:\|)
Objects scanned: 169731
Time elapsed: 42 minute(s), 47 second(s)
Memory Processes Infected: 0
Memory Modules Infected: 1
Registry Keys Infected: 9
Registry Values Infected: 1
Registry Data Items Infected: 1
Folders Infected: 0
Files Infected: 8
Memory Processes Infected:
(No malicious items detected)
Memory Modules Infected:
C:\Windows\System32\byXOHaBU.dll (Trojan.Vundo) -> Unloaded module successfully.
Registry Keys Infected:
HKEY_CLASSES_ROOT\CLSID\{1449fa3b-f8a5-40ec-87da-707e80637ddd} (Trojan.Vundo) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Browser Helper Objects\{1449fa3b-f8a5-40ec-87da-707e80637ddd} (Trojan.Vundo) -> Delete on reboot.
HKEY_CLASSES_ROOT\CLSID\{663656df-6bae-460c-a612-8133df519346} (Trojan.Vundo) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\aoprndtws (Malware.Trace) -> Quarantined and deleted successfully.
HKEY_CURRENT_USER\Software\Microsoft\affri (Malware.Trace) -> Quarantined and deleted successfully.
HKEY_CURRENT_USER\Software\Microsoft\rdfa (Trojan.Vundo) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\affri (Malware.Trace) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FCOVM (Trojan.Vundo) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\RemoveRP (Trojan.Vundo) -> Quarantined and deleted successfully.
Registry Values Infected:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\ShellExecuteHooks\{663656df-6bae-460c-a612-8133df519346} (Trojan.Vundo) -> Quarantined and deleted successfully.
Registry Data Items Infected:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Authentication Packages (Trojan.Vundo) -> Data: c:\windows\system32\byxohabu -> Quarantined and deleted successfully.
Folders Infected:
(No malicious items detected)
Files Infected:
C:\Windows\System32\byXOHaBU.dll (Trojan.Vundo) -> Delete on reboot.
C:\Users\Shere Khan\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\LK0KREDB\kb516107[1] (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\fccywwts.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\gEwtTLFy.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\yayvSiHb.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\_Shere_Quarantine\fmsnvygd.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\byXnMghG.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\byXPfgfe.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
Here's the log on the second scan, after a restart:
Malwarebytes' Anti-Malware 1.14
Database version: 808
9:48:01 PM 5/31/2008
mbam-log-5-31-2008 (21-48-01).txt
Scan type: Full Scan (C:\|D:\|)
Objects scanned: 168808
Time elapsed: 56 minute(s), 31 second(s)
Memory Processes Infected: 0
Memory Modules Infected: 0
Registry Keys Infected: 0
Registry Values Infected: 0
Registry Data Items Infected: 0
Folders Infected: 0
Files Infected: 2
Memory Processes Infected:
(No malicious items detected)
Memory Modules Infected:
(No malicious items detected)
Registry Keys Infected:
(No malicious items detected)
Registry Values Infected:
(No malicious items detected)
Registry Data Items Infected:
(No malicious items detected)
Folders Infected:
(No malicious items detected)
Files Infected:
C:\Windows\System32\byXOHaBU.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\dqhreobq.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
On the third scan, no other infections were found. The files and locations and one or two registry entries are similar to what I suspected was not allright, so I guess the (right) virus has been found and eliminated. Have enabled Java in FireFox and everything seems fine, haven't touched Internet Explorer just to be on the safe side so I can't say anything about that, but everything looks allright. Seems this was the problem. Thanks again, mate, your post was a life saver. -
Google safe browsing service is unavailable
In my preferences of Safari is appeared this: "google safe browsing service is unavailable"
Thank you very much for your helpHi fellow Granite Stater - have you looked at Activity monitor to see what's using so much CPU and causing the fan to run so loudly? You might also want to reset the PRAM to see if that will help your icons stick.
Have you emptied Safari's caches? You can try resetting it as well.
Does using Firefox produce the same fan problems?
I suggest you back up all your data to an external and then run DiskWarrior or TechToolPro if you have either, or run the Apple Hardware test from your install disk.
It might be a good idea to check things using Disk Utility:
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Reboot and repair permissions from your hard drive.
Please post back with results, -
"102-System Board Failure. Unrecoverable error. Your computer needs servicing."
I just replaced the power supply. Now I get a message that reads: "102-System Board Failure. Unrecoverable error. Your computer needs servicing."
What does this mean?
Thanks,
mhm30f10MHM30F10, welcome to the forum.
It is difficult to know exactly what has happened. However, I suspect that there has been damage to the motherboard while installing the power supply unit (PSU). It could be that there is an incorrect connection, also.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
SQL Server browser services.
we have two instance of sql server 2014,
In Services, It shows only one SQL Server browser services.
Is it true there is only one SQL Browser service for both instances.
Thanks
VYes, This is normal.
Prior to SQL Server 2000, only one instance of SQL Server could be installed on a computer. SQL Server listened for incoming requests on port 1433, assigned to SQL Server by the official Internet
Assigned Numbers Authority (IANA). Only one instance of SQL Server can use a port, so when SQL Server 2000 introduced support for multiple instances of SQL Server, SQL Server Resolution Protocol (SSRP) was developed to listen on UDP port 1434. This listener
service responded to client requests with the names of the installed instances, and the ports or named pipes used by the instance. To resolve limitations of the SSRP system, SQL Server 2005 introduced the SQL Server Browser service as a replacement for SSRP.
more info: SQL Server Browser Service
T-SQL e-book by TechNet Wiki Community
My Blog
My Articles -
Browser is disabled by IT Policy
When I try to access an internet site on my blackberry I get the message "Browser is disabled by IT Policy". Yet if a link in embedded in an email the browser connects to the site correctly.
Browser
Default browser configuration: BB Browser
Default MDS browser configuration: BB Browser
Also under Option and Advanced OptionsBrowser PushChecked Enable PushChecked Enable MDS push
Checked Enable WP PushService Load, Service Indication, and Other Messages are all set to: Process MDS Auto
MDS Hosts Allow AllProcess SMSC AutoSMSC Hosts Allow AllProcess IP AutoIP Hosts Allow All
The same IT policy is applied to all other BlackBerries in the company (BES with Exchange) and they do not have the problem. We resent the IT policy to the handheld but that did not solve the problem. We also changed the IT Policy to allow any Browser and applied it to the BlackBerry then the browser worked on the BlackBerry. Changed the IT policy back and the problem came back.
Talked to Verizon Wireless tech support and they are out of ideasI just had this problem, and what I did to solve it was checking the "browser" setting when editing each bookmark. In my case it was set to "hotspot browser" which was disabled under the IT policy. Updated each bookmark that didn't work to "internet browser" and the issue had been resolved. Hopefully this solution will work for you as well.
-
Unable to start SQL Server Browser service in Sql server 2005
we are unable to start the SQL browser service on one of our machine with below error.
I believe this to be the reason, why we could not connect to the instance with below error
I tried troubleshooting as mentioned here, by changing
value in registry from 1 to 0, but still no luck.
SQLservices are also running.
Please help on how to resolve this!Hello,
You say that SQL Server Browser Service belongs to a SQL Server 2005, but based on the name of the instance is a SQL Server
2012 instance.
Do you have any issues installing/uninstalling SQL Server 2005 or 2012? One of them 32-bit and the other 64-bit?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Documents service disabled for Oracle Spaces. How to I enable it. I previously had no problem with this.
Have you configured a proper connection in the service configuration in the enterprise manager?
Is your UCM up and running properly? -
Tiger - All Sahring Options/Services disabled, greyed out
Hello from Portugal!
I noticed that on System Preferences I had all my Sharing services disabled and cannot select any of them (greyed out). Also, the Firewall Tab was disabled to (greyed out), and I couldn't select it either. I noticed that as the first option (also greyed out) I had a new service called "M82" ( ? ) that I had never seen before.
1- So I did a Archive and Install from Tiger 10.4.0 original DVD to try to find out what update cause this strange behavior.
2- After that I updated from 10.4.0 to 10.4.11 (Combo update) with Software Update.
3- After that I checked the Sharing services and all was well and normal. I could select/activate all the Sharing Option and the Firewall Tab was back to normal again.
4- I returned to Software Update and Made the folowing updates/instalations:
. Java 1.3.1 and 1.4.2 Release 2 (2.0)
. QuickTime (7.6)
. Migration and DVD/CD Sharing (1.1)
. Safari 3.2.1
5- After the restart I checked again and all my Sharing services and Firewall Tab were once again disabled. Also, the mysterious new service "M82" (also disabled) was back again.
So the cause of this problem is one (or more) of the updates I made in step 4 (maybe not Safari 3.2.1).
What can I do to resolve this issue without having to install Tiger 10.4.0 again?
Thank you for your help!
pedro
Message was edited by: Pedro TaquelimThanks for your help BDAqua,
I modified my system language from Portuguese (Portugal) to english an all got back to normal.
altought it's a solution to resolve this specific problem, it's forces me t use english instead of my mother language. Not wise. I'm going to contact Apple to fix this.
Thanks again!
pedro -
Google safe browsing service is unavailable, no updates have occurred in 5 days
this message appears on safary/prefferences/security/under fraudulent sites
google safe browsing service is unavailable, no updates have occurred in 5 days??
help please!From the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and uncheck the box marked
Warn when visiting a fraudulent website
Then check the box again. Wait a minute or so and test. -
Dim Browser Service Button is not properly configured
I have created a report in Web Analysis Studio with a Dimension Browser service button, but when I open the report in Workspace the service button does not work. I am getting the following error message. "Dim Browser Service Button is not properly configured" Please let me know if I can use the Dimension Browser service button in Workspace.
Edited by: user9321517 on Mar 11, 2010 9:28 AMVersion 11.1.1.3
In Desginer mode I added services to my view
I choose dimension browser from the options
selected the data source and changed the title.
When I open the report in Workspace I receive the error that its is not configyred properly
Please help
Maybe you are looking for
-
Not able to use HP Solution Centre after installing on Windows 7
Widows 7 Office Jet 6500 N I have reinstalled drivers on 6 occasions, each time a diffenetnt problem. I now have it installed to work on a network and all seems OK except I have no Solution Centre only HP Document Manager. It asks me to complete th
-
Resolute song refuses to be downloaded
I bought Astronautslis' album "You and Yer Good Ideas" off of iTunes months ago. When I first bought I received an error message saying the song won't download. After hours of soul searching and thousands of dollars in therapy I've accepted the fact
-
Distribution Provisioning Profile - Device ERROR
Hey, I created a Distribution Provisioning Profile, but somehow, I get an error... When I click Build and Go I get an alert window: The the device doesn't have provisioning profile the application was signed with. (iPhone SDK 2.2.1) It's strange, bec
-
30 second recovery... or why Time Machine is so cool.
Time Machine is very cool- I was troubleshooting a problem with one of my favourite apps - PDFPen Pro - a small low price pdf editor - and their support said the problem might relate to "incompatible fonts in Leopard". So I went into Font Book and st
-
Server License for Creative Suite
Does anyone know what a server license is for the Adobe Creative Suite. If a company gets it, can any number of staff be in the suite at one time? What are the drawbacks?