Computer cannot use the Hotspot / Tethering after Xperia ZU upgrade to Lollipop!!

After the phone upgrade to Lollipop, it can still share the hotspot and computer can connect to the shared wifi. But the computer is not able to access internet!

Hi HimHim, welcome to the community!
Have you downloaded your internet settings under Settings > More? If not please try this, if this does not help and you are sure you have mobile data turned on the Xperia, then I advise contacting your network provider and/or Sony Xperia Customer Care in your region. You can click the link in my signature for details.

Similar Messages

Satellite A300-1mz Can I use the recovery disks after a HDD upgrade?

I'm upgrading the hard drive of my *toshiba a300-1mz*, but I'd be sure that I can use the *recovery disks* maked at the first boots for the s.o. (vista)
I expect your support...
thank you very much...

> how can I be sure that the disk is properly recognized before I buy it???
What do you mean exactly? Did you mean the HDD???
The A300 supports and 2.5 SATA HDD and all 2.5 HDD should be recognized properly since the SATA HDD controller hasnt any limitations.
Bye

I cannot use personal hotspot on my iphone 4 after update ios 7.1

I cannot use personal hotspot on my iphone 4 after update ios 7.1. Please help me.

The update may have caused a change in identification for the network. Also, you never answered if the network appears ready on the phone to share. You may have to reset the network, and forget the network on the iPod Touch and the computer before attempting to connect again.

Hi. After I have loaded a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cut, for instance I cannot use Ctrl T to enter free transform mode. Also the toolbar is so small I cannot see the icons without ge

Hi. After loading a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cuts, for instance I cannot use Ctrl + T for free transform, how do I resolve this problem. In addition the tool Icons are so small I have to get close to the screen to see them, is there anyway the Icons can be made bigger without reducing the resolution of the screen.
Thanks
Derek

Are you working on a background layer? If so, Ctrl + T will not work. Press Alt and double-click your background layer to convert to a normal layer (or right-click BG layer and select Layer from Background) and try again.
If you're working in Photoshop CC 2014 you can go to Preferences > Experimental Features and tick "Scale UI 200% for high-density displays" to make your buttons and icons larger.

Why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloadi

why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???

Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
Any LRcat file with .lock extension , move it to Desktop.

I have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive I keep on getting the message "lightroom cannot use the catalog named " " because it is

I have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive I keep on getting the message "lightroom cannot use the catalog named " " because it is not writable and cannot be opened. I have fixed all the "permissions" and yet it will still not open. How do I fix this?

Hello Forum Members,
I figured it out. You have to select the actual logo of the Lightroom catalog and then click on "get info" and allow what ever your new user name to "read and write". That worked!
Henri Silberman

I cannot authorize my new computer in iTunes because I hit the 5 device limit. However, I cannot deauthorize the old one because it's gone. I also cannot use the deauthorize all computers button because I did last year when I was replacing computers. Is t

I cannot authorize my new computer in iTunes because I hit the 5 device limit. However, I cannot deauthorize the old one because it's gone. I also cannot use the deauthorize all computers button because I did last year when I was replacing computers. Is there any other way of deauthorizing computers that no longer exist?

harishassan16 wrote:
... Is there any other way of deauthorizing computers that no longer exist?
If you no longer have, or access to, the computer(s) you want to deauthorise,
Log in to iTunes, go to "view your account info" on the itunes store, deauthorise all five,
(Please Note: this can only be done Once every 12 months)
Then re-authorize your current Computer(s) one at a time..
Authorise / Deauthorise About
http://support.apple.com/kb/HT1420
harishassan16 wrote:
... I also cannot use the deauthorize all computers button because I did last year ...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I bought the student and teacher version of CS5 extended for windows. Can I download the Mac version to my new apple computer and use the same serial number after removing phtoshop from my PC?

i bought the student and teacher version of CS5 extended for windows. Can I download the Mac version to my new apple computer and use the same serial number after removing phtoshop from my PC?

Can I download the Mac version to my new apple computer and use the same serial number after removing phtoshop from my PC?
Short answer: not for CS5.
Platform swaps are available but only for CS6
Order product | Platform, language swap

HT1766 After IOS 7.0.4 Updation My ipad 4 started to turn off frequently and i cannot use the ipad morethan 5 minutes, how to resolve this issue.

After IOS 7.0.4 Updation My ipad 4 started to turn off frequently and i cannot use the ipad morethan 5 minutes, how to resolve this issue.

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

After installing Acrobat X pro as a trial, I cannot use the software and Im required to enter the serial number to continue

After installing Acrobat X pro as a trial, I cannot use the software and Im required to enter the serial number to continue
Under Continue to use as a trial it shows 0 days remaining.

Trial mode expires prematurely
http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html

HT4623 Why I cannot use the new feature of phone after I upgraded to ios 6???

I have already upgraded to iOS 6, but why I still cannot use the new feature of phone??
I cannot reject calls by sending them message. What happen??

While ios 6 is compatable with the iPhone 4, many of its features are not available for the 4. The features need the 4s or 5. See here:
Turn-by-turn navigation is available only on iPhone 4S, iPhone 5, and iPad 2 or later with cellular data capability. Flyover is available only on iPhone 4S, iPhone 5, iPad 2 or later, and iPod touch (5th generation). Cellular data charges may apply.
Siri is available in Beta only on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. Siri may not be available in all languages or in all areas, and features may vary by area. Cellular data charges may apply.
FaceTime video calling requires a FaceTime-enabled device for the caller and recipient and a Wi-Fi connection. FaceTime over a cellular network requires iPhone 4S, iPhone 5, or iPad (3rd generation) with cellular data capability. Availability over a cellular network depends on carrier policies; data charges may apply.
Offline Reading List is available on iPhone 4 or later, iPad 2 or later, and iPod touch (5th generation).
Made for iPhone hearing aids require iPhone 4S or iPhone 5.
Panorama is available on iPhone 4S, iPhone 5, and iPod touch (5th generation).
Find My iPhone and Find My Friends enable you to locate iOS devices only when they are on and connected to a registered Wi-Fi network or have an active data plan.

Cannot use the undo function

I just loaded Final Cut Pro onto a new computer and I cannot use the undo/redo function keys. Is there a problem with the software or do I have a setting set incorrectly.
When I go under edit, both undo and redo are grey so I cannot use. I also cannot use the short cut key.

Undo/Redo is command and Z. Are you using a different keyboard layout than US English?
You can set the number of undos from the menu bar: Final Cut Pro > User Preferences > General.
This functionality is dependent on how much RAM is installed in your computer - setting a higher number of steps backwards will use more. How much do you have installed?
Undo/Redo is only available after you have done something to the media in FCP. It is not saved in your project file. Closing a FCP project will lose any saved undo steps, although you can still use one of the Auto-saves of your project file to go back.

Lightroom cannot use the Catalog named "Lightroom 5" because it is not ........

I keep getting an error after closing Lightoom "Lightroom cannot use the Catalog named "Lightroom 5" because it is not writable and cannot be opened"
Eventually I have been able to regain acess only to have it happen again, it is happening every day now. I have tried shutting down services and programs, sometimes it works. I have restarted my computer, I have deleted previews.lrdat and that worked once, but not always. I have saved and optimised the catalog, still happens. there is no journal file open or in existence when this error happens and finally, now I have lost my publish services which represent the record of hudreds, even thousands of online images. HELP

Have you checked the permissions on the folder where the catalog is stored and the permissions on the catalog file itself? Does it show write permission or something else?
And just a wild shot in the dark, you should also check to see if the catalog file or its folder is shown as Read Only by your operating system (It should not be)

GB won't open- This is what I get... Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser

Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser. Then I get this message...
Instrument Library Invalid
GarageBand Ecpects a valid instrument foledr in /Libraty/Application Support/GarageBand
Please choose a valid instrument Library folder or quit and re-install GB
Any solutions?

Is this a new installation of GarageBand or has it worked before on the same computer?
Or have you transferrred your GarageBand from a different computer?
The error message is saying, that your GarageBand installation is incomplete. There are essential foldrs missing in your system library.
Check, if indeed both folders are missing or if only the permissions are set incorrectly.
Your system library (the folder "System" directly on your system drive) should have the following folders inside the folder "Audio", and they need to be readable by the system and by administrators.
And in the folder /Library/Application Support there should be the Instrument Library.
If these folders do not exist (or no longer exist), restore them from your backup- If your GarageBand version is a new installation, the application may not hve been downloaded or installed completely, then reinstall GarageBand.
What is your GarageBAnd version, and how did you install it originally?
Regards
Léonie

Can not port forward on WRT54GS v6 "You cannot use the router IP"

Hello, I'm trying to open a port number, but when I try to use my router's IP, the following message appears
"You cannot use the router IP, network, or broadband address"
[IMG]http://i45.tinypic.com/107qond.jpg[/IMG]
My ADSL was working as a NAT behind a NAT connection, so I had to change my Local IP Address to 192.168.2.1.
Router: WRT54GS v6 firmware 1.52.8 (latest) - Bellsouth router: Westell 6100
Microsoft Windows [Version 6.1.7600]
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : launchmodem.com
   Link-local IPv6 Address . . . . . : fe80::40a9:a76e:61b3:6435%11
   IPv4 Address. . . . . . . . . . . : 192.168.2.100
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.2.1
So, please help me, how can I open ports on my router? =[
PS: I tried to use 192.168.2.100, and even though it lets me use it, it still seems not to open that port... my IP is dynamic.

Generally: NAT behind NAT is a bad idea. There is usually no need for double NAT. Either configure the ADSL router as bridge and use the WRT for your internet connection or set up the WRT as simple access point behind the ADSL router.
It's also unclear to me what is working or not. First I thought you can't set up forwarding at all because you get that error message. Then, in your PS you write you tried to use 192.168.2.100 and that seemed to be possible. The IP address to forward to must be the IP address of the computer to which you want to forward. Thus 192.168.2.100 is exactly the IP address you have to set up. Does this work or not?
Also remember: with double NAT you must set up two forwardings: first on the ADSL router then on the WRT. Port forwarding is necessary to allow incoming traffic through NAT. All incoming traffic arrives on the ADSL router. Thus setting up port forwarding on the WRT only won't do a thing.
It's also not recommend to use dynamic IPs for forwarding destinations. Dynamic IP addresses may change over time and that requires you to adjust forwardings accordingly. It's better to reserve fixed IP addresses (if your WRT supports this) or set a static IP address on the computer outside the DHCP address pool.

Computer cannot use the Hotspot / Tethering after Xperia ZU upgrade to Lollipop!!

Similar Messages

Maybe you are looking for