Computer Clock keeps getting reset

My computer clock keeps resetting itself. I have replaced the PRAM battery with a brand new one and I still am receiving this error message. What else could be going on?

The card was already installed, working fine. To troubleshoot another issue (I cannot export video from my Canopus ADVC300), I removed all PCI cards. All 4 slots are used. After I removed the 4 PCI cards, my Mac started losing time. I then replaced the PRAM battery and reset the PRAM. This didn't solve the issue. When I put the other 3 PCI cards back in, nothing happened as well. When I put the Sonnet Tempo SATA back in, the computer started retaining the time. Unfortunately, I the computer is not retaining the time anymore- even with all 4 PCI cards installed. How do you reset the MOBO?

Similar Messages

I am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad. an unknown error occurs (1631). what do I do??

am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad. an unknown error occurs (1631). what do I do??

The search bar can be very valuable...........
In using it, I found out other's have had this issue and it likely means you have a 3G iPad? If you do, go into settings and turn off cellular data, then try to update again and you should be OK........

I'm trying to sync my phone to my computer and keep getting error message "1140" just when it's about to finish. My updates are current. Thoughts?

I'm trying to sync my phone to my computer and keep getting error message "1140" just when it's about to finish. My updates are current. Thoughts?

Hi hannijin,
What version of the Mac OS X do you have on your computer? The version of iTunes that you can install is dependent on the operating system that you have. For example, the current version of iTunes requires OS X version 10.7.5 or later.
Finding the OS X version and build information on your Mac - Apple Support
https://support.apple.com/en-us/HT201260
Apple - OS X Yosemite - How to Upgrade
https://www.apple.com/osx/how-to-upgrade/
Hope that helps ...
- Judy

When syncing my iPad with my computer I keep getting the notice ' waiting for changes to be applied '. What is this all about ?

When syncing my iPad with my computer I keep getting the notice ' waiting for changes to be applied '. What is this all about ?

If everything is working OK, I believe it simply means that the iPad and iTunes are communicating and that any changes that you made to the sync configuration are waiting to go through. If you updated apps on the iPad and they get transferred into iTunes or if you download new songs onto the iPad and they are being transferred into iTunes, any app data that moves back and forth - those would be changes that need to be applied.
If you can't finish the sync and that's why you are asking, can you provide more specific details?

My apple id keeps getting reset. I have had to change my password at least 6 times in the last two weeks and it has now reset again

My apple id keeps getting reset. I have had to change my password at least 6 times in the last two weeks and it has now reset again

You probably are mixing up your password with passwords from other accounts. If i were you i would write down your password somewhere easy to acess and make it very hard to guess if you ever reset it.

My Apple id keeps getting reset. How can I stop this?

My Apple id keeps getting reset. How can I stop this?

That's fine. I just didn't understand, but suspected that's what you meant.
You should contact Apple about this. Go to this website, find your country, and call Apple and ask to speak to Account Security about this.
http://support.apple.com/kb/HT5699

HT1349 i have itunes on my windows xp computer. i keep getting cd registrysettings are missing. i updated my itunes program on site and in my control panel. twice and it still comes up when i open itunes. any ideas?

i have i tunes installed on my windows xp computer. i keep getting cd regsitry settings missing. i have downloaded latest itunes and repaired thru control panel twice. i'm still getting this message when i open itunes. any ideas?

Hi
This forum is for XServes and Servers so your question is not really appropriate. You'd stand more chance of a response if you posted in the correct forum:
https://discussions.apple.com/community/itunes
The main page for all the forums is here:
https://discussions.apple.com/index.jspa
Consult this carefully before deciding which forum is most appropriate for your question.
Sounds like a major problem with your PC.
HTH?
Tony

Password keeps getting reset.

Hi there.
I've had my password been reset about 20 times in the last few months, not by me. I keep getting emails saying that my password has been reset without my consent. I've changed the password back every single time, each time making it increasingly obscure. I've also changed all my security questions to almost impossible to guess answers even by my close family.
I'm now starting to believe that somebody is either hacking my account or my computer has contracted some sort of virus.
This issue is making me absolutely livid. It's a real nuisance.
Any suggestions very welcome.
Charlie.

I'm assuming that you're talking about your Apple ID password? Most likely, these e-mails either represent a phishing attempt, in which case there's nothing to be done but send them to your junk mail folder, or someone is repeatedly trying to reset your account password. To rule out the latter, enable two-factor authentication on your Apple ID, which will prevent any password reset attempts without providing some additional authentication.

On loading backup file to new computer, I keep getting an error message.

I have been trying to move my bookmarks to a new computer using the backup file which I prepared and stored on my external hard drive, but I keep getting an error message.

What error message do you get?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
Make sure that the bookmarks backup file has the correct (lowercase) file extension:
* .html for a HTML backup (needs to be imported and merges bookmarks)
* .json for a JSON backup (needs to be restored and replaces bookmarks)
You can check the file type via the right-click context menu of that file and open the Properties.
If you are not sure about the file type then you can open the file in Firefox via "Firefox > New Tab > Open File" or "File > Open File".
A JSON backup will show as one long text line without line breaks and a HTML backup shows as a web page with clickable links.
A JSON backup starts with: <nowiki>{"title":"","id":1,"dateAdded":</nowiki>
An HTML backup starts with: <nowiki><!DOCTYPE NETSCAPE-Bookmark-file-1></nowiki>
Verify the file type in the Properties via the right-click context menu to make sure that the change has been successful.
Windows hides some file extensions by default.
Among them are .html and .ini and .js and .txt, so you may only see file name without file extension.
You can see the real file type (file extension) in the properties of the file via the right-click context menu in Windows Explorer.

Having trouble downloading itunes on my computer. i keep getting a error message that reads: apple sync notifier.exe- entry point not found.

Hello, can anyone help me out there? Im having trouble downloading itunes on my computer.
Ikeep getting a error message reading:
#1 applesyncnotifer.exe- entry point not found.
#2 the procedure entry point sqlite3-wal-checkpoint could not be located in the dynamic link library. sqlite3.d11.
#3 service 'apple mobile device' (apple mobile device)
failed to start. Verify that you have sufficient privileges to start system services.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

TS3212 trying to activate my iPhone 4S when I try to download iTunes on my Windows 7 computer I keep getting message telling me to verify that the package exists or contact the application vendor. All I want to do is activate my new phone. What am I doin

I was excited when my iPhone 4sarrived yesterday. I charged it but today when I tried to download iTunes in order to activate the phone I found that I was unable to download it successfully. I keep getting a message that tells me to Verify that the package exists or contact the application vendor. I have no idea how to do any of this. I was downloading from the AT&T support site.

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

New 8.1 computer. Keep getting pop up window to update Firefox

XP worked fine.. Now keep getting pop up to install FF update. Is it legit.. I have FF28
Thanks

Whenever you get a message / popup that software / files need to be updated, 
'''''DO NOT USE ANY OF THE PROVIDED LINKS'''''. 
While this may be a legitimate message, it could also be '''''Malware or a Virus'''''.
Any time you want or need to check for upgrades,
go to the web site of the '''''True Owner''''' of the program in question.
For example, to check out Firefox, go to '''''[https://www.mozilla.org Mozilla.org]'''''

Computer name keeps getting (2) appended to it.

I've searched high and low and can't seem to figure out why my iMac thinks the computer name is already being used on the network.
I can see in the sharing preference pane that the original name is what is indicated with this copy:
Computers on your local network can access your computer at: XXXXX.local
However, the name in the field above it has XXXXX (2) and each time I try to get rid of the (2) I get the message:
The name of your computer “XXXXX” is already in use on this network. The name has been changed to “XXXXX (2)”
I can change the name using the EDIT button to anything else I want, and it doesn't add the (2). But once I change it back to my desired computer name, I get the same message that it's already being used.
I've tried turning off all of my sharing services but that still doesn't seem to allow the name to be used.
Any idea what other process is running that can be using the name? How do I figure out where the conflict is occurring?

Thanks for the suggestion, Alberto. I turned all networking off and was able to make the change successfully. However, once I turned networking back on again, the same message popped up:
The name of your computer “XXXXX” is already in use on this network. The name has been changed to “XXXXX (2)”
In the Sharing Preference Pane, I verified that it appears to still be using the correct .local name:
Computers on your local network can access your computer at: XXXXX.local
But the Computer Name in the field above the message switched to XXXXX (2) again.

My password keeps getting reset

Nearly every day now my Apple ID password gets reset. I had some problems with my security questions being changed so had to ring up Apple to sort it. I don't have another email which I'm guessing will stop this? I'm running out of passwords to have.
Help :(

This explains it. Too bad apple hasent said much
http://www.theverge.com/2013/3/22/4136242/major-security-hole-allows-apple-id-pa sswords-reset-with-email-date-of-birth

"Including when automatically checking" keeps getting reset

I am using MobileMe including a MacBook Pro and iMac. Set up my work email account as POP3 on both systems. I keep unchecking "Including when automatically checking for new mail" because I don't always want to be downloading these for a few reasons. However, the box keeps getting re-checked on both systems! how do I prevent this? Also have this on iphone but the account is not active.

I think the problem might arise from the process of retrieving mail. I've gone into Mail, Preferences, General and have set retrieval to Manual rather than every minute. I'll also avoid using the 'Get Mail' button, as I think this is part of the problem - I think it might cause the 'Include when automatically checking for new mail' box to be checked.
So, given that the MobileMe mail account pushes new email to my computers instantly, I'm still getting my mail quickly, with no routine checking.
I'll report back if this keeps working.

Computer Clock keeps getting reset

Similar Messages

Maybe you are looking for