Computer couldn't detect ipod problem
my computer couldn't detect ipod classic 30gb(windows vista), it just stop responding. However, when i plug in my iphone, it works.
my ipod classic works on other computers though(vista and xp)
I wonder what cause this problem
anyone have any idea???
Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB
Similar Messages
-
Hi,
My computer won't detect my iPod when I plug it in. I open up iTunes and it won't show up in the list. It gets a picture of a sad ipod on it, and as it starts up it makes an odd clicking noise. I cannot get it into disk mode. I've tried all of the solutions at the apple support site and it simply won't work. I downloaded the iPod Updater software and I got it running but it couldn't detect my iPod for some reason. Ive switched the cable to different USB ports and my comp wont detect it. Also when I try and reset it, (after the clicking noise stops and it shuts off) there is an icon which looks like a battery with rough, jagged, or broken ends. What does this mean and what can I do?Welcome to Apple Discussions!
iPod Displays A Sad Face
Also, for the other icon...
Have A Strange Icon On Your iPod?
btabz -
Computer won't detect ipod shuffle
Background on my shuffle, I purchased it in 2008 and have used it non-stop since. My husband also has one, purchased the same day, but it has rarely been used. So what I am about to describe has actually happened with both shuffles. One day when I was going to attach my shuffle to it's original charger base, I noticed that the base had fell between my computer desk and something else and became bent. I went ahead and tried to place my shuffle on the base just to see if it would work and it wouldn't. So thinking that the charger was destroyed, I went out and bought a new USB charger cable. When I connected my shuffle to the new cable my computer didn't even detect it and so my problems began. I also assume that my shuffles battery is totally discharged (or maybe the shuffle is totally dead, not sure), but there are no indicator lights coming on at all. My husbands shuffle needs to be charged, but the red indicator light will come on and blink when you turn it on. I connected his shuffle to the computer as well, using the old charger and the new one, and the computer will not detect his shuffle. I have updated, removed, and reinstalled iTunes multiple times. I have also put iTunes on my netbook and tried to connect both shuffles using new and old cables, nothing happens. I have used all the USB ports I have, nothing happens, but all of my other things that are in the ports work. I have looked over Apples site, YouTube, talked to people I know, tried everything I see, and nothing is working. I refuse to pay for Apple to help me with this because I will just buy a new shuffle (the new cable was $19! and it's at least $19 to get Apple to talk to me!). To add to this, I was thinking that maybe charging a different type of iPod in my computer may have had an effect. Several months ago, a friend of mine gave me her old iPod (it has a screen, but it's not a touch screen, sorry I don't know what kind of iPod it is). However, this iPod and the shuffles have been charging happily together and my shuffle working in iTunes without problems until this incident. iTunes would detect all iPods, but would not let me do anything with my friends iPod to allow me to make any changes to it (which isn't a problem I care to address at this point). Now, my computer will detect my friends iPod to at least charge it, but iTunes will not detect it. Thankfully, in this process I have not lost any purchased music, but I would really appreciate any advice on how to fix this. I would even be ok with restoring the shuffles, but I can't even do that because they aren't detected (unless there is some way to do that outside of iTunes). I'm sure this sounds confusing, but if you ask specific questions I'm sure things can be more clear so there can be a better understanding of the issue so everyone out there can help me solve it! Thanks!!
Just an update, after I posted this I put my husbands shuffle on the charger to see what it would do. Before putting it on the charger I turned it on and no light came on! It seems something is disabling the shuffles. Could it be a virus? I have virus software on my computer and it isn't detecting anything. Also, my husbands shuffle didn't work on the netbook even when the indicator light was coming on.
-
Vista: computer doesn't detect iPod
I got my iPod 2 days ago, I went home and connected it to my PC and everything worked fine, I had my old iPod Nano connected at the same time, and both worked just fine. I put the songs on my iPod. I tried connected it to my PC a few hours later (just the new one) and it's not being detected by Windows, or iTunes. I'm using my old iPods USB cable, I'm not sure if that would affect it though because I used that cable for it when I connected it the first time.
I can't restore my ipod because it is not detected with the ipod updater either so resotring is unavailable.
-
I just built a new computer and I'm trying to connect my iPod via Firewire. I checked in device manager and the IEEE 1394 device is the VIA VT6307. I went to the Windows hardware compatibility list (http://www.microsoft.com/whdc/hcl/search.mspx/search.mspx) and it isn't listed there but the version earlier, the VT6306 is.
I'm wondering if there's some way to get around this. My iPod doesn't show up in My Computer or in iPod Updater or iTunes.
The motherboard I'm using is the DFI Lanparty NF4 Ultra-D if that helps any. It's a 2nd gen. iPod so using USB 2.0 isn't an option.If so inclined, you might be able to de-activate by going into the BIOS or motherboard jumper settings. The PCI firewire card may still work even with the motherboard firewire port. I have a motherboard firewire port, another one on a Soundblaster sound card and a Belkin PCI firewire card and the iPod works on all of them.
-
Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.
I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,... -
After updating my ipod touch, my computer did not detect my ipod in devices on itunes. It says I need to install a driver software for my mobile device. Help pls?
Maybe this will resolve your problem:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Or you may have to look at the river/server topicsof the following:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Since you were unclear at to the error message. -
Hello, when I tried to update my iPod with something in the settings, I noticed my PC couldn't detect my iPod. My iPod is now stuck on the "Connect to iTunes" screen. Please, help me fix this.
I think my iTouch was on 5.1.1 before putting an attemp to update.Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
My computer won't detect my ipod 4g when it is plugged in and it won't sync with itunes, what should I do???
Did you already try the troubleshooting mentioned in this article? iOS: Device not recognized in iTunes for Windows
-
Recently purchased a used IPad 2 but it still has previous owner's data. I've been told not to sync it to my computer as it will cause problems. What do I need to do to make it compatible with accounts on my mac and ipod touch? Thanks for any and all help!
You can wipe the iPad's contents completely by going to Settings>General>Reset>Erase All Content and Settings. This will remove all of the previous user's apps, data, settings and so on from the iPad and you can set it up as your own.
-
IPod problem connecting to computer
Every time I connect my iPod to my computer, it crashes my computer. I get the fatal blue screen of death. What, may I ask, is going on?
MEE TOOO!!!!!
its really annoying me and not only is it crashing my computer but its corrupting it aswell when it crashes!!! i have a ipod touch and a ipod 30GB 5th gen nd the ipod touch i update regulaly and it syncs slowly but atleast it works - the other just crashes my computer and causes it to "dump phisical memory" and then turn off.
i have even spent money on trying to optyimize my pc thinking that my computer couldn't cope but it still goes wrong!!!! HELP!!!!! -
Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5. Dont know if I changed settings or something.
Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html -
Hi there, ipod touch went white. I tried the menu and on/off button for 10 seconds. I also tried connecting to the computer via i tunes. My computer did not detect the ipod? Any other options?
See the white-screen topic of:
iPod touch: Hardware troubleshooting -
Hi
I am having problems with my old computer so syncyed my ipod to my new computer. all the appliance/games synched but not my music. I have somehow manged to wipe all my music from my ipod and it will not synch with my music libary from my old computer. Any suggestions.? Anyone have any suggestions?
-
Windows or itunes not detecting ipod touch
my computer is not detecting my ipod, ive tried reinstalling itunes, restarting my computer and device and pretty much all of the troubleshooting solutions offered online but still it will not be detected, it has previously worked without fail its just in the last few days i have noticed it. the actual sync cable is fine and ive treid several.
thanks- Have you tried everything here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
- Try anohter computer ot help determine if you have an iPod or computer problem
- Make and appointment at the Genius Bar of an Apple store.
Maybe you are looking for
-
I am asked to render a short film for a publishing/broadcasting company and they require a time code 1:00:00:00. How do I provide it? and how do I render the footage with this timecode on premiere pro cs6? What would be the highest quality possible c
-
Dear Experts In our client system, for a particular export scenario, the taxcode is not getting determined properly & saying that the requirement 008 for that access is not fulfilled. The condition records & configurations are maintained properly. Th
-
UNABLE TO IMPORT THE IDOC IN XI
hi We have extended IDOC INVOIC.INVOIC02.ZINVOICO2EX with a custom segment. But when we try importing the same in XI it gives the following error: + Error: IDoc type INVOIC02 contains errors (unable to read segments) We are unable to understand the r
-
I am trying to recreate my partners Matlab filter in Labview whereby a sine wave goes through a low pass filter. I am using a sinewave array as the input and am trying to impose the s-domain low-pass transfer function s/(1+sT) on the wave as is done
-
Find Unicode compatible programs
How to find abap programs(objects) are unicode compatible or not? How to list out the unicode compatible programs? Are there any function moduels in abap??