Computer Count and last login count

Does anyone have a sql report that could be run for a total of model computer count, the model, and then the last user logged in.
The problem we are having with our model and count report is that it is leaving off about 500 machines because they are not reporting a model so therefore our report is flawed.  Is there a way to get those machines to show up or just add last logged
in user to track them down?

Ya some dont have a model, Here is our current script:
select
GSCS.Manufacturer0 as [Manufacturer],
GSCS.Model0 as [Model],
count(*) as [Count]
from v_R_System RS
left join v_GS_COMPUTER_SYSTEM GSCS on RS.ResourceID = GSCS.ResourceID
Group by GSCS.Model0, GSCS.Manufacturer0
Order by GSCS.Model0
Hardware inventory is enabled not sure why there are 500 machines out of our 4000 not showing a model.  Do I have to enable something special in hardware inventory?
How could I add last user to this script.

Similar Messages

  • Play count and last played features do not update

    The play count and last played features do not update when syncing my 7th gen nano but still operate wit my 5th gen nano. I cannot find any way of changing  the preferences to do this with the iPod connected to the computer. Any ideas?Play count

    I am having the EXACT same problem with my Ipod! I still have yet to figure out how to fix it, but my brother (who knows everything about ipods), has yet to figure out what is making this happen.

  • Play counts and last played not registered

    When syncing my iPod after the past few days, I was worried when last.fm (music listening tracker for those who don't know it) told me I had no plays to sync with their server. Usually, this means that there was a handshake error with iTunes but I always double check. So I did.
    When I looked, all the music from the past few days had no sign that I listened to it at all. No change in play counts, and last played match when I last listened to them on my computer (for many it's never). This is a syncing iPod that works by playlists, which prior to now had no problem syncing play counts at all but only gained this issue recently, with no changes to my settings at all since the last time this was done successfully.
    Troubleshooting?

    I am having this exact same issue in iTunes 11 running on OSX 10.6.8.
    Short tracks (less than 10sec) do not update their metadata to increase the play count. However if I play a short track on my iPod or iPhone and then sync with iTunes the play count and last played info is updated.
    This really messes up my smart playlists that use playcount limiters.
    I hope there is a fix for this soon.

  • Importing music library removes "play count" and "last played" information

    I recently updated my music drive and had to edit the iTunes Music Library XML file to reflect this. However, I've tried several times to import the edited file and each time iTunes throws out the "play count" and "last played" fields for each track. Not only that, it rewrites the entire XML file without them.
    How can I retain this data?

    Updating all the songs is impossible,
    But you want to update the same songs over and over?
    i have more than 30gb on my pc, and also i dont like carrying some unnessesary song with me all the time.
    So don't put all the songs on your iPod.
    Just put the ones you want. You can select to auto update only selected playlists.
    Taggs on my computer and ipod are different because it's more useful this way..
    That way if you have to reload the songs, you have to "update" everything again.
    I don't understand how it's "more useful". It's certainly not more convenient.
    Since you are already in iTunes, why not make it simple and update everything only one time?
    I mean, you can do it any way you want but is is so much easier to do it only one time.
    The iPod/iTunes were designed for simple and ease of use. You shouldn't have constantly put a bunch of work into just maintaining everything.

  • Lost my ratings, play count and last played

    HI, I recently moved my library off my macbook and onto an external drive to save space. Somehow I lost all my ratings, play count and last played info. My Ipod still shows the ratings, however. Is there any way I can get itunes to import the information off my ipod? Thanks for any advice.

    Can you put things back the way they were before you moved them to the external? If you can, then you can easily move it to the external by copying the entire iTunes folder to the external and opening from the new location using these instructions...
    How to open an alternate iTunes Library file or create a new one
    http://docs.info.apple.com/article.html?artnum=304447
    How was it that you moved it?
    Patrick

  • ITunes Play Count and Last Played not updating?

    Hi All,
    I have an IPOD shuffle 1GB 2nd gen, I'm using the latest ITunes 7.7.1.11, I have Windows XP SP3 intalled. On Aug 14th for some reason that was the last time ITunes Play Count and Last Played columns updated in ITunes. I listen to and recharge my shuffle everyday. When I hook my IPOD to the base it is recognized and ITunes opens and says it's syncing, then after about 30 seconds it says sync is complete, ok to disconnect, the flashing orange light goes green & everything seems correct except those 2 columns don't get updated, does anyone know how to make ITunes start updating that information again?
    Thanks for any advice,
    Steve

    Hi Paul,
    Just downloaded and installed iTunes 8.0. I played a few songs on my shuffle and synced it again, the problem remains the same, the last played & play count do not change. I wonder what happened on Aug 14th because thats the last time it worked.
    Thank you again,
    Steve

  • Help, Library corrupted, need to save ratings, play counts, and last played

    Help, my iTunes lost its connection to my media server yesterday and it seems to have totally corrupted the library. I have all my music files intact, but if I recreate the library by starting afresh, I will lose 6 years worth of ratings, play counts, and last played dates. I do not want to lose this information. I have the information in an library export.
    How can I add back the music and restore the metadata??

    I am having this exact same issue in iTunes 11 running on OSX 10.6.8.
    Short tracks (less than 10sec) do not update their metadata to increase the play count. However if I play a short track on my iPod or iPhone and then sync with iTunes the play count and last played info is updated.
    This really messes up my smart playlists that use playcount limiters.
    I hope there is a fix for this soon.

  • Play counts and "Last Played" not updating on short songs?

    It looks like a lot of people have had trouble with play counts not updating with crossfade turned on. I've never used crossfade, so this doesn't bother me. However, I do have a plethora of very short tracks in my library (owing to there being many video game soundtracks with short fanfares as tracks), and I've noticed that when playing any song that's 10 seconds or less, it will show up in the "History" tab of "Up Next", but "Plays" and "Last Played" remain the same. Any other song in my library, whether it's 11 seconds long like "Got a Star Piece (part 1)" from "Super Mario RPG" by Yoko Shimomura or 11 minutes long like "I Am" from "As the World Bleeds" by Theocracy, will update its play count properly when played. Why is 10 seconds enough time to play a song and add it to my history, but not enough time to update when I last played it and make it appear in the smart playlist of recently played songs? Is iTunes 11 so obsessed with 11 that if a song isn't 11 seconds long, it doesn't consider it to be worth tracking?

    I am having this exact same issue in iTunes 11 running on OSX 10.6.8.
    Short tracks (less than 10sec) do not update their metadata to increase the play count. However if I play a short track on my iPod or iPhone and then sync with iTunes the play count and last played info is updated.
    This really messes up my smart playlists that use playcount limiters.
    I hope there is a fix for this soon.

  • What will be the peoplesoft query to calculate voluntary termination count and involuntary termination count? I am working on OBIA HR analytics workforce deployment reports and need to validate the reports

    what will be the peoplesoft query to calculate voluntary termination count and involuntary termination count? I am working on OBIA HR analytics workforce deployment reports and need to validate the reports. I also want to know the tables involved

    Hi Andrew,
    Part A:
    I've done some restating of the question, and distributed the calculations among several fields, not all of which need to be included on the visible layout. Other than formatting the Date fields and moving the 'Completed Date' field and its label, I've left this in the default "Layout 1" produced by AppleWorks.
    Field List:
    Priority: Popup menu with six items: 00, J, D, 1, 2, 3  Defaults to 00
    TL (time limit in months): Calculation:  CHOOSE('Priority',0,1,3,4,6,12)
    Received: Date. Option: Automatically insert today's date (ie. Date Record created) (may be edited)
    Target Date: Calculation:
    DATE(YEAR('Received')+INT(MONTH('Received')+'TL')/12,MOD(MONTH('Received')+'TL', 12),DAY('Received'))
    Remaining (Days): Calculation: INT('Target Date'+1-NOW())  (see revision below)
    Completed: Checkbox. Set default value to Unchecked.
    Completed Date: Date: Entered manually
    OnTarget: Calculation: IF('Completed',IF('Completed Date'<'Target Date',"On Target","Over"),IF(INT(NOW())>'Target Date',"Over","On Target"))
    The On Target field shows the current status of the case while still open, and the state on the closing date when it was closed.
    Having done that, I was unhappy with the Remaining field continuing to calculate an ever larger negative number after the case had been closed. Hence this revision below:
    Remaining: Calculation: IF('Completed','Target Date'-'Completed Date',INT('Target Date'+1-NOW()))
    Shows the number of days remaining while the case is open, the days remaining at completion if the case has been marked Completed and the completion date entered.
    Rsults (and some further formatting of the Layout) below.
    Part B:
    You will need Subsummary parts when sorted on Completed and on On Target. Fields can appear on  a Layout only once, so each subsummary part will need a separate Summary type field for each field to be summarized.
    Regards,
    Barry

  • Play Count and Last Played not updating from iPod in iTunes

    I've had this problem with 2 of my iPods over 2 different computers, and I have no idea what is causing it.
    For some reason, sometimes when I have finished listening to my iPod for the day and then go in to plug it and sync it with iTunes, none of the Play Count or Last Played updates from the iPod. But sometimes it DOES update, which is what frustrates me, as I cannot seem to pinpoint the problem.
    These are my specs at the moment:
    iPod: Fifth-gen 30GB video
    iTunes: 7.0 (also had this issue with 6.x and 4.x before this)
    Computer: P4 3.0GHz dual-core, 1GB RAM, WinXP Pro, USB 2.0 ports (also experienced this exact problem with Firewire ports).
    I always have iTunes set to automatically sync with the iPod. I have also gone through the 5 suggested steps (including restoring the iPod, restarting the computer and trying out other ports) on several occasions already.
    I also had this exact same problem with my old computer and old iPod, the specs which were as follows:
    iPod: Third-gen 20GB
    Computer: P3 450MHz, 384MB RAM, WinXP Pro, USB 2.0 and Firewire ports.
    Has anyone experienced this particular issue before? If so, is there a solution to this issue? It has been bugging me for a while now, and I don't know what other action to take. Thanks heaps in advance!
    P4 dual-core 3.0GHz   Windows XP Pro   1GB RAM, iTunes 7, USB2.0

    hi ozfrog80! sorry, my english is poor...i´ve got a similar problem with a 30gb-video-ipod at mac mini (g5).i just updated itunes 7 at saturday and it ran for 2 days without a problem. okay, some playlists seemed strange, but no problems with the sound (see other topics).
    i updated the ipod-software to the latest software-version on saturday too.
    while "connection" of ipod/itunes the sync.-symbol never dissappeared. but no new data was transmitted.
    yesterday, the ipod froze while running and had to be resetted. result: now the connection to itunes fails because "itunes doesn´t react".
    the ipod is "empty" now.
    i re-installed both quicktime and itunes (as considered in other topics) but that didn´t solve the problem.
    funny: itunes runs without a problem but won´t connect to ipod.
    i don´t know what the problem is.....i´m waiting for an update....thanx and good luck from mainz/germany.

  • How To Get Deleted Item Count and Associated Item Count And LastLogOn and LogOff Time For A Mailbox In Exchange Using EWS

    Using Powershell cmdlet i get  all the details..But i want to get these Details by using EWS Managed Api.Is It Possible to do???
    Powershell Cmdlet,
    Get-MailboxStatistics -Identity Username, Using this cmdlets all the details will get displayed.
    DeletedItemCount:5 //Here how this count comes.In My OutlookWebApp the deleteditems folder contains 13 items in it..But the count shows only 5.
    TotalDeletedItemSize:5.465 Kb//Even this value too does not match with DeletedItems Folder size in owa.
    AssociatedItemCount:12
    LastLogOnTime:11/11/11 12:43PM
    LastLogOff Time:11/11/11 2:43PM
    In EWS,
    By Looping through all folders i can get the total item count and total item size.Even i can get deleteditems  count .But that value does not match  With the powershell value.Even the TotalDeletedItemSize
    Doesnt match.
    Using EWS Managed Api ,Looping through folders i can get ItemCount,TotalitemSize,(DeletedItems,TotalDeleteditemSize(These TwoValues Does not match with values comes from powershell))
    Now how to get the Associated item count and lastlogoff and logon time using EWS managed Api.Is it Possible???
    And even y the deleteditems count and size values varies between EWS and powershell.

    What happens if you execute the below code?
    Get-MailboxFolderStatistics [email protected] | where {$_.FolderPath -like "/Deleted Items"}
    Refer this blog. You may get some dice
    http://exchangepedia.com/blog/2008/09/configuring-deleted-item-retention.html
    Regards Chen V [MCTS SharePoint 2010]

  • When was the first and last login of a db user

    Hi @ all,
    I'm trying to find out the first and the last login of a special db user at an Oracle 10g (10.2.0.1.0) Instance.
    How can I do that?
    Thanks and best regards,
    David

    What Nicholas said is true, but depending what you are looking for, you may also search/review audit files created by everytime a sysdba or sysoper session was created by looking in your audit directory.
    From within sqlplus, "show parameter audit"
    Then, go to that directory and you will see hundreds/thousands of audit files for each time a sysdba or sysoper session was started.
    Within those logs are entries such as:
    Tue Mar 12 16:00:00 2013 -04:00
    LENGTH : '155'
    ACTION :[7] 'CONNECT'
    DATABASE USER:[1] '/'
    PRIVILEGE :[6] 'SYSDBA' <=========== sysdba or sysoper (I believe this is all that is captured.)
    CLIENT USER:[6] 'oracle' <=========== shows the OS user that connected to the database
    CLIENT TERMINAL:[0] ''
    STATUS:[1] '0'
    DBID:[10] '1321231341'

  • First Generation Ipod Shuffle: Play count and Last Played date

    I have a 1st Gen Ipod shuffle that works great in all other respects but it doesn't track the number of "plays" or the "last play" dates. Which means I can't use the "Smart Playlists" Itunes feature to be sure that the music on it stay fresh, non-repetitive. Another problem is if I listen to a podcast on the Ipod Shuffle then in Itunes the podcast appears as though it has never played before. This gets confusing as I listen to a number of podcasts.
    I have tried resetting and restoring the Ipod shuffle. Is there anything I can do to it to make it track the number of plays or last played dates?

    All my tracks should be MP3s or AAC.  I ripped them myselfs with iTunes.  I may have bought some songs directly off of record labels or some other online music store, but I own my music legally whether I bought it on CD or got given it by magazines or record labels.
    I went to the gym today.  I set the shuffle to random.  Some songs were synched back to iTunes but they weren't the songs I listened to, at least not all of them.  Some of them may have been the songs I listened to last workout, at least one or two of the songs updated I did listen to today.
    I listened to some other songs last night on my main Mac so it is easy to determine which songs iTunes updated this morning.
    I haven't had much time to play with Match.  It is still updating and uploading, it has 6000 songs to go.  That means in a half month of trying it has managed to find and/or upload a little over 1000 songs actually close to 2000 now.  It is something, but it isn't the service I was sold.  All my songs and playlists were supposed to be available in the cloud.  That hasn't happened and in the case of my smart playlists will never happen. 
    I'll read you link, but I wrote a blog posting how I was disappointed with the service so far.
    Thanks!

  • IPod Shuffle 2 no longer updating playlist play count and last played date

    I use my shuffle 2 in the gym.  When I'm done working out I sync and the most recently played songs are rotated off using a smart play list.  This is no longer working.  I reset the shuffle 2, I've forced sync and auto filled many times.  My latest workout it still lists all the songs I just listened to in the order I listened to them and has their last played date as many months ago.
    This seems to be affecting my other iPod too, but it is tougher to diagnose.  I signed up to iTunes Match and after several days that is still running but I noticed this problem long before iTunes Match became available in Canada.  Both my iPod Shuffle and iTunes are up to date but my music is on an older but upgraded Mac.  It has a G4 so no Lion upgrade, I just checked it is 10.5.8

    All my tracks should be MP3s or AAC.  I ripped them myselfs with iTunes.  I may have bought some songs directly off of record labels or some other online music store, but I own my music legally whether I bought it on CD or got given it by magazines or record labels.
    I went to the gym today.  I set the shuffle to random.  Some songs were synched back to iTunes but they weren't the songs I listened to, at least not all of them.  Some of them may have been the songs I listened to last workout, at least one or two of the songs updated I did listen to today.
    I listened to some other songs last night on my main Mac so it is easy to determine which songs iTunes updated this morning.
    I haven't had much time to play with Match.  It is still updating and uploading, it has 6000 songs to go.  That means in a half month of trying it has managed to find and/or upload a little over 1000 songs actually close to 2000 now.  It is something, but it isn't the service I was sold.  All my songs and playlists were supposed to be available in the cloud.  That hasn't happened and in the case of my smart playlists will never happen. 
    I'll read you link, but I wrote a blog posting how I was disappointed with the service so far.
    Thanks!

  • How can I use a gating counter and an input counter in countinuous mode

    Hi,
    I have a PXI 6259 with LV 7.1 and I am trying to generate a retriggerable finite pulse train (using Counter 1) in order to gate the input counter (Counter 0).
    For generating I found : Gen Dig Pulse Train-Finite-Retriggerable.vi that works well.
    For Counting: Count Digital Events-Buffered-Continuous-Ext Clk.vi that is OK.
    I am trying to merge these examples to generate and count on the same program, but I don't now how !!!

    So, once every 200 microsec (5 kHz laser pulses), you want to trigger a finite pulse train generation.  That pulse train will pulse 25 times at 10 MHz freq.  You would like to take a PMT count sample on each of these 25 pulses.  Is this correct?  If so, sorry, I mainly have bad news.
    1. (Not hard but costs $)  The speeds you need prevent you from using the AI, AO, or DIO features of your board to compensate for the limited # of counters on the M-series 6259.  You really do need 3 counters here, 2 to generate a retriggerable finite pulse train and 1 to buffer count samples.  A dedicated counter/timer board like the 6602 may be worth considering.
    2. (Hard.)  However, based on various threads here I'm quite doubtful that you'll be able to achieve counter sample rates of 10 MHz.  Most of the discussion seems to set a ceiling in the low 100's of kHz, and reliability will suffer as you approach the limit.
    -Kevin P.

Maybe you are looking for