Computer does not automaticatly go into Standby when iTunes 9 running

Hi
I have Windows XP computer and have installed iTunes on it for my iPod.
I have set on the 'power options properties' panel 'Power Schemes' tab for the computer to go into standby automatically if idle after 5 mins. This works well with any programs running EXCEPT iTunes. I had the same problem on my last computer - the problem is specifically with iTunes.
I have chosen iTunes settings that do not share the library or search for remote speakers etc but nothing works.
Any ideas welcome?
Thanks
Tim

What OS is PC running?
Is your device connected to the PC while going into standby mode?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Similar Messages

HT1386 I have an iphone 4 which quit working and I had my iphone 3 reactivated until I get my 4 replaced or fixed. My computer does not recognize my iphone 3 when I plug it in. I also cannot figure out how to apply my last backup to my iphone 3

I have an iphone 4 which quit working and I had my iphone 3 reactivated until I get my 4 replaced or fixed. My computer does not recognize my iphone 3 when I plug it in. I also cannot figure out how to apply my last backup to my iphone 3

If your iPhone 4 was running iOS 5, you can't install iOS 5 on an iPhone 3G which means you can't restore the 3G from the backup of the iPhone 4 running iOS 5.
http://support.apple.com/kb/TS1538

HT203167 My iTunes library on laptop is correct/up to date with recent purchases and downloads; however, our desktop computer does not have any of these when logged into Itunes.... how do I add these so both computers have current info?

The iTunes library on our laptop is correct and up to date with recent purchases and downloads; however, our desktop does not have any of these when using it. Home sharing is turned "ON" with both computers. Why is the desktop not showing the same content and how do I resolve this?

From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
Also see this migrate iTunes library post by turingtest2

Computer does not put itself to sleep when used in lid-closed mode

Hi. I'm having a small problem when using my macbook pro with the LED display, lid closed and with external keyboard and mouse. If I leave the computer unattended, the display goes to sleep at the time specified in system settings under energy saver. The computer, however, does not go to sleep - the white power indicator remains solid and noises for new email etc can still be heard.
I should probably just try to remember to put it to sleep manually but I keep forgetting. Does anybody know what settings I need to adjust?

I tried cycling the old battery many times, and the computer would still shut down unexpectedly instead of going to sleep when it ran out of power. I got a free replacement from the supplier [http://myworld.ebay.com/cbkusaelectronics>, but I have cycled this new battery twice now, and it still does not go to sleep when it runs out of power. The capacity of the battery is fine (4.9 Ah), and the timing calibration seems fine as well. I have two older batteries from NewerTech and they allow sleep every time, so I think my computer is fine. Can anyone enlighten me about the cause of this problem? Does my battery lack some 'sleep battery' cell in it for use after the other 4 cells discharge? Or does my battery lack a chip that communicates with the computer? Is there any hope of getting this battery to support sleep when discharged?
Has anyone else seen this problem consistently in a brand of battery? Does anyone have a recommendation for a cheaper battery that does not exhibit this problem? I have been happy with NewerTech, but they cost over $130.
(I only paid $44 plus $10 shipping, so I probably got what I paid for. It is maybe still worth it to have a high capacity battery for such a low cost, but I can't rely upon it in those last few minutes or I may lose work.)

My windows 8.1 computer does not Recognize my Ipod Touch when connected

I recently bought a Windows computer running 8.1 When I connect my IPod touch it does not seem to srcognize it and it does not show up in I tunes

Hey Kettletom,
I understand that your iPod touch isn't recognized in iTunes for your new Windows computer. I would run through the troubleshooting steps in the following link:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Let us know if following that article helped the situation.
Welcome to Apple Support Communities!
Regards,
Delgadoh

HT1688 How do you set up photo streaming to your home computer/windows? My computer does not show an iclod icon when I go to the control panel/network and internet

How can I set up icloud phote streaming to my home computer?
When I follow their directions my comuter does not show the Icloud icon uner the control panel / netwrok internet

http://www.apple.com/icloud/setup/pc.html
To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows (Windows Vista with Service Pack 2 or Windows 7 required).

Macbook Air (11 inch) does NOT go in hibernation mode when battery runs out

Hi,
I have a problem with my new Macbook Air. When the battery runs out to 0% it does NOT go into hibernation mode, it just turns itself off and all my data is lost. It never happened to my old 2008 Macbook Air!
I have all updates, the 1.4Ghz Macbook with 4GB RAM upgrade in case that matters. Hope anyone can help? Is there perhaps a setting where I can set at which Percentage (%) the Macbook should go into hibernation? Thanks in advance!

Noone knows a solution? I also still have problems with my Macbook not waking up properly (like everyone else). The main problem is, however, that it SHUTS down when the battery is empty and does not hibernate!
And I can't install the MacBook Air Late 2010 Software Update 2.0 - I always get this message: "MacBook Air (Late 2010) Software Update can’t be installed on this disc. This volume does not meet the requirements for this update."
- The update also does not show up in Software Update, I had to download it manually!
And I believe its NOT because I have 10.6.6 because I have talked to others who have the same problem under 10.6.5!

Computer Does not turn off after i when to start and turn off

Ok here is my Problem when i want to shut down my computer. the screen stay in window is shutting down and freezed. the only way i can shut it down is by pressing reset and then press the power button to have my computer shut down. does anyone know what is this ? and how can i fix it ?

well it been like that when i first build the computer i just want to see if something is wrong and i can fix it without format the computer or anyting i have let it sit there for over few hours and it still won't shut down. so not sure what is wrong with it .

My computer does not auto read my iphone when connected. How? Can't sync.

When i plug in my iphone 3GS to my laptop, there was no auto read.
I tried switching off my phone and rebooting my laptop and just downloaded the latest version of itunes. Nothing seemed to work. How?

http://support.apple.com/kb/TS1495

Computer does not "see" iPod in Explorer or iTunes in USB connection

I used my iPod ( 20G Color Photo ) as a hard-drive and transferred files onto it but after I disconnected it, no system recognizes it as either an iPod or a drive. Nothing! It is fully charged from a direct plug-in.
Tried "Install New Hardware" in Windows... nothing found. Tried the 5 "R"'s... nothing.
iPod is "running" but shows no songs and no photos in storage when you check "Settings"/"About", Capacity is 18.5G and Available is 3.8 G.
Any thoughts? PLEASE HELP!

This is a good place to start:
iPod missing in "My Computer" or in iTunes on Windows

Computer does not recognize powershot a590 is

When I plug the camera to my laptop with windows 8.1 with the usb cable it came with the computer does not recognize the device. When I hit device trouble shooter same thing. I can not run the software cd because my new laptop doesnt have a cd drive. I did go to the canon site and upload the software thinking that may solve the issue, but when I get to step two of the installation and I connect the camera per directions it again can not find the device.
I can not seem to find a driver alone for a manual installation.
Any help or thoughts greatly appreciated!!!

Hi sasbuckeye!
Thanks for posting about this.
The drivers needed are built into Windows, so no additional driver installation is required. I would like to gather some additional information to help determine what is causing the issue.
Is the camera still recognized at all by other computers?
Is your laptop connection to AC power?
Are there any devices connected to your laptop other than the camera?
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

User defined fields does not get added into database

Hello Experts
                          User defined fields does not get added into database , when i click add button it
shows data added sucessfully , but when i check data base no entry is made , only entry is made for
B1 fields , like DocEntry ,DocNum etc.., no entry is made for U_fields..
I have check every thing databound is also set to true
Actually first few 6 data was added properly but now its not geeting added for user fields
I have used 2 document row child table for 2 matrix and for remaining Document table
What might be the problem
reply soon
plz suggest

Hello sir
I have checked Default form , in that entry is made into database
but running the form in screen painter in preview mode or through coding it does not get added for user field
this id my binding code
LoadFromXML("updateopd.srf")
            oForm = SBO_Application.Forms.Item("updopd")
            oForm.DataBrowser.BrowseBy = "txtpatid"
            'Adding combo in Obervation
            oItem = oForm.Items.Item("txtpatid")
            oEdit2 = oItem.Specific()
            oEdit2.DataBind.SetBound(True, "@UPDATE", "U_PID")
            oItem = oForm.Items.Item("txtmnane")
            oEdit3 = oItem.Specific()
            oEdit3.DataBind.SetBound(True, "@UPDATE", "U_FName")
            oItem = oForm.Items.Item("txtlname")
            oEdit3 = oItem.Specific()
            oEdit3.DataBind.SetBound(True, "@UPDATE", "U_LName")
Plz suggest

"Your computer does not seem to be connected to the internet." when trying to sign into Lightroom Mobile

I want to connect Lightroom 5.5 with Lightroom mobile. I click on the identity plate in Lightroom and select "sign in". A window opens saying "connecting...". Eventually the message changes to "Your computer does not seem to be connected to the internet." My machine is a Windows 8.1 PC and I already tried to solve the issue by allowing LR through the firewall.

I just found a solution:
- Close Lightroom
- Rename your .lrprefs file to e.g. .lrprefs.old
- Launch LR
- Sign in
- Close LR
- Delete the newly created .lrprefs file
- Rename your previous .lrprefs file from .lrprefs.old to .lrprefs
- Launch LR again and sign in

HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
Sounds like a repair issue, which is not easy to do in India :(

HT1277 Mail on my Mac computer does not update when I update my mail on my phone and iPad. Can anyone help me with this? Is there a setting I need to check?

Mail on my Mac computer does not update when I update my mail on my iPhone and iPad. Can anyone help me with this? Is there a setting that I need to check?

All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
Did you try signing into the store settings with your new ID and see what happens with the updates then?

Computer does not automaticatly go into Standby when iTunes 9 running

Similar Messages

Maybe you are looking for