Computer doesn't find my Ipod

I purchased an Asus computer which started off with Windows 8 and I upgraded to Windows 8.1. I have an Apple Ipod shuffle 3rd generation and when I plug it into the USB port, my computer does not find it, even when I search for new devices....HELP PLEASE....I want my music from my ipod on my computer.

Does the iPod's light still come ON when you connect it?  If it does, what does it do immediately after connecting to USB?
Are you using the same USB docking cable, connected to a direct USB port on the computer?  As a test, you should shut down (power off) your computer and disconnect all USB devices, including hub.  You can leave standard keyboard and mouse connected (if used).  If the computer is a laptop, connect its power adapter (so that it's not running on battery power).  Do this to reset the shuffle
http://support.apple.com/kb/ht1655
Start up the computer, run iTunes, and connect the shuffle to a direct USB port on the computer. 

Similar Messages

  • When I conect my iPod 4g to my computer mi computer doesn't find it and in iTunes is the same... HELP ME PLEASE!!!

    when I conect my iPod 4g to my computer mi computer doesn't find it and in iTunes is the same... HELP ME PLEASE!!!

    http://support.apple.com/kb/ts1567
    http://support.apple.com/kb/ht1808
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?

    My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?
    When I connect my iPod to my computer, nothing happens. I've read the tips in the section "support" and I noticed that maybe Windows 8 is not one of the operating systems that are compatible with an iPod nano 7th generation. If I'm right, what can I do if my only device is a Windows 8?

    Hi, Grafiti. 
    Thank you for the question.  Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
    Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • Why is my computer doesn't recognize my Ipod Touch?

    My computer doesn't recognize my Ipod Touch. Any suggestion?

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Why can't my computer see or find my ipod when i plug it in?

    why can't my computer see or find my ipod when i plug it in?
    so frustrating...

    See Here...
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    And Here
    iPhone, iPad, or iPod touch not appearing in iTunes

  • My computer doesn't recognize my ipod, why?

    My computer doesn't recognize my ipod, why?Can u help?T.you (i'm french)

    http://support.apple.com/kb/ts1369

  • My computer doesn't recognize my ipod

    My computer doesn't recognize my ipod. It is not visible in iTunes or in the computer icon

    Click here --> iOS: Device not recognized in iTunes for Windows

  • My computer doesn't recognize my ipod when I plug it in.

    My computer doesn't recognize my ipod when I plug it in.  This happened after my daughter connected her ipod to my pc.

    Try here:
    iOS: Not responding or does not turn on
    Next make an appointment at the Genius Bar of an Apple store.

  • My computer doesn't recognize my ipod nano 2nd gen

    My computer running Windows 7 doesn't recognize my ipod nano 2nd gen.  Also my ipod not seen in my itunes.  I did all the reset stuff and nothing works.  Do you think it is just shot???

    Make sure you have the latest version of iTunes. Are you a Mac or PC user?
    Hm so have you also tried completely erasing your iPod?

  • Computer doesn't recognize that ipod is plugged in

    So I've had this ipod for at least a year now and have been using the same computer for the past 7 months and it's always worked fine. Now all of the sudden my computer doesn't recognize that it is plugged in. It's not even that it doesn't recognize the USB device it's not there period. I tried manually putting it into disk mode but it still didn't recognize it. Please help!!

    http://discussions.apple.com/message.jspa?messageID=11359368#11359368

  • My computer doesn't recognize my iPod and therefore will not sync my new music

    When I plug my iPod up to my computer, my computer doesn't recognize that the iPod is plugged in. I've tried reinstalling iTunes and this iPod has synced with this computer before.

    Hy there,
    In order for you to solve this problem you have to follow these stept if your running windows:
    1'st step is to go into the device manager
    2 step is to go to portable devices (it is right under network adapters)
    3 step is to right clic apple ipod and click update drivers
    4 step is to brows your drivers from C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    After that your itunes will pump up alown and youl see your iphone right there.
    If these doesent work try restarting your device and then see what happens.
    Good luck and sry for my bad righting.
    Andrei

  • My computer doesn't recognize my Ipod and it is disabled

    After not using my ipod touch fro a while, I forgot the password. I used up all the tries, and now it says that it is diabled and i have to connect it to my itunes. When I plug it into my Windows 8 computer, itunes doesn't recgonize my ipod. It is on file for back up, but nothing happens. My itunes is up to date. I don't know what to do. I've tried so many different things.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • HELP! My Computer doesn't recognize my ipod nano

    so i have one of the older nanos.(the one's that are either white or black and thin). So I go to plug it in and *my ipod doesn't show up on my itunes*! i'm scared because not all of my songs are backed up and I don't want to restore it! please, any help would be much appreciated.
    <3lyndsp<3

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod shows up in Windows but not in iTunes
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

  • My New computer doesn't recognize my ipod nano

    my old computer crashed. i now have a new laptop. i have installed my iPod software and the latest iTunes. i can go into iTunes, access the music store, and everything else... but when i plug up my iPod, it doesnt pop up in the source menu in iTunes. the iPod is showing DO NOT DISCONNECT so i know that the cable and USB port are good. i registered it on this new computer and everything but i dont know why it wont recognize that its plugged up and let me put more songs on it. ive searched these threads and cant find a straight up answer that doesnt involve erasing my whole iPod. is that my only option? ive spent $100+ on iTunes from my old computer and granted i know i cant put these songs onto my new laptop, i at least want them to stay on my iPod! can anyone please help?
    IBM ThinkPad   Windows 2000  

    thanks for replying! im assuming you mean these...
    1. Reset your iPod, iPod nano, iPod mini, or iPod shuffle.
    2. Retry your iPod with a different USB or FireWire port on your computer (please note that the latest iPods can only be synced through USB).
    3. Restart your computer, and make sure that you have the latest software updates installed.
    4. Reinstall your iPod and iTunes software. You can download the latest versions of iPod Updater and iTunes from our website.
    5. Restore your iPod using the latest iPod Updater. Important: Please note that restoring an iPod will erase all songs and files on your iPod and restore it back to its original settings. Make a backup of any files on your iPod before restoring it. After restoring, you can transfer your music and files from your computer back to your iPod again.
    I did reset my iPod, tried restarting the computer, and reinstalled iPod on here AND updated iTunes to the latest version. I only have one USB port on this laptop, so its possible it isn't high-powered (is that the right term?) enough for iPod? This computer is pretty old. So aside from that the last option in your suggestion is the Restore. I just don't understand how that can be the only option just because I got a new computer. If so I wish I had known that before using iTunes to buy my music

  • My computer doesn't recognize my iPod when hooked up through a USB port?

    I restarted my computer and my iPod, and it doesn't work. The iPod does not recognize being hooked up to a computer, and the computer does not recognize that the iPod is hooked up to it. My iPod's not even charging when connected to my computer. This first occured when I disconnected my iPod from my XBox 360 while the 'Do Not Disconnect' screen was shown. However, the iPod still works with my XBox 360 as well as my AC adapter charger. The iPod also does not show in Device Manager, so it's not recognized by Windows or iTunes. Any help is greatly appreciated, thanks in advance.
    Windows XP   Windows XP   Compaq Presario Intel Pentium 4

    Try here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Yu need iTunes 10.5 or later

Maybe you are looking for

  • Reg: passing totals /subtotals of a ALV to a smartform

    I have a editable ALV report which has a button to call a smartform . Once the user edits some  fields I need to pass the refreshed total to the smartform.  I want to know - in what structure the totals/subtotals  of the ALV report are stored.

  • LMS 4.2.3 Update Issue

    Is anybody else seeing an issue in applying package updates in LMS 4.2.3? I am getting an error whether going via the GUI or CLI. The key issue appears to be (acroding to the PSU.log): [ Sat May 11 16:41:25 EST 2013 ] ERROR  [PsuPkgResolver : pickUns

  • Error while starting JBOSS Server

    We had deployed OIM 10g on a JBOSS server for testing purposes. While starting the server i am able to see some errors in the error log. The design console is working fine and there is no issues. But the admin console is not opening properly.I am cur

  • Data in InfoSet not Displaying after TR

    Hi, I just transported an InfoSet to Production. All the DSO's seem to be displaying data and working fine. But the InfoSet is not displaying any data.The InfoSet was working fine in QAS. How can i fix this? Thanks

  • Cinestyle Colour Profile For iPhone 6 Video

    Hi ! I'm a pro photographer and just started playing with the iPhone 6 video ... it's amazing. However, I find the colours and contrast too punchy and severe - so the video files it creates are not great to edit and grade in Final Cut Pro X. Does any