Computer doesn't recognize my mini!

I just updated, then read on the forum that perhaps my ipod is set on manual instead of auto - so I checked under preferences. It said no ipod connected, but it is! the pod, meanwhile, simply says "do not disconnect" and iTunes just sits there with the icon. this has never happened before and I checked the port and everything. I'm at a loss and frustrated.
osx   Mac OS X (10.3.9)  

First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are.
Still no joy? See these.
iPod doesn't appear in iTunes or on the Mac desktop.
iPod does not appear in iPod Updater or iTunes in Mac OS X.
iPod appears on the Mac OS X desktop but not in iTunes.
Try to restore it in disk mode.
Putting iPod into disk mode.

Similar Messages

  • Computer doesn't recgonize ipod mini

    In mid October after the release of the 10-11-2005 updater my computer stopped recognizing my ipod mini. The ipod no longer shows up in Explorer and does not receive a charge. Was excited to see the 1-10-06 updates but have not had any luck with this version either. I've had the ipod since 12/04 and had no issues prior to the last round of updates.
    I have tried the following fixes. Any suggestions would be greatly appreciated!
    Tested USB ports, they work with other devices
    Tested hooked ipod up to another XP machine was not found as new hardware, tested another device on the same machine it was recognized as new hardware
    Replaced the USB cable
    Deinstalled/reinstalled Itunes and Ipod
    Tried all teh steps to reset ipod, can't get it to go to disk mode, can't restore because the computer doesn't think its connected.
    Reinstalled XP SP2
    Deinstalled any new or funky software, disabled any virus or security software.

    "i've tried hooking my ipod up to every usb port i
    have, including a usb hub, but each time i get a
    message saying that the usb device is not recognized
    and there are no drivers installed for the device. i
    have tried restarting my computer and reseting the
    ipod. the battery is charged. I even downloaded and
    installed the newest ipod updater but then realized
    it couldnt do anything because the computer doesn't
    recognize the mini.
    urgh.
    i've been working on this for like a month.
    please help.
    much love.
    dell  
    Windows XP  
    dell   Windows XP   "
    I am having the same problem! I don't know what to do. Can anyone help please?
    Toshiba   Windows XP  

  • My ipad mini has water damage but when I plug into wall it says to connect to itunes. When I plug into Mac nothing happens. Not even a charging sign and nothing happens with itunes. Computer doesn't recognize it's plugged in.

    my ipad mini has water damage but when I plug into wall it says to connect to itunes. When I plug into Mac nothing happens. Not even a charging sign and nothing happens with itunes. Computer doesn't recognize it's plugged in.

    If moisture got inside, it may have shorted the iPad's electronics.
    Solutions for wet iPad.
    http://www.gazelle.com/how-to/ipad/ipad-recover-from-water-damage
    http://www.knowyourmobile.com/appleiphone/ipad/ipaduserguides/701079/how_to_fix_ an_ipad_if_it_gets_wet.html
     Cheers, Tom

  • Computer doesn't recognize my Zen Mozaic

    I have a new Zen Mozaic MP3 player (about 2 months old). I have been using Windows Media player to transfer music from my PC (XP OS) to the player without any problems until now.
    Now my computer doesn't recognize the MP3 player as being connected to the USB port. I uninstalled the Creative software that came with the player and then reinstalled and it didn't fix the problem. Also I've tried connecting other flash dri'ves and the computer recognizes them.... Also, shutting down and restarting the PC didn't help either.
    Is anybody having this same issue?
    Any help would be appreciated.

    mskatdavis wrote:
    Don't know if this will help but if you are not using the usb port that came with your player the computer may charge but not? reconize the player. At least that is what is happening with mine.
    same as to what i was thinking. if this is really the case, i always do stick with its original accessories like the usb port.

  • My ipod touch (4gen) won't turn on or charge. My computer doesn't recognize when I plug the ipod in. What can I do?

    My ipod touch (4gen) won't turn on or charge. My computer doesn't recognize when I plug the ipon in. What can I do?

    same problem over here

  • My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?

    My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?
    When I connect my iPod to my computer, nothing happens. I've read the tips in the section "support" and I noticed that maybe Windows 8 is not one of the operating systems that are compatible with an iPod nano 7th generation. If I'm right, what can I do if my only device is a Windows 8?

    Hi, Grafiti. 
    Thank you for the question.  Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
    Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • I have an 11" MacBook Air.  When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer.  Is there another way to get the computer to recognize the adapter?  (It works with my MacBook Pro)

    I have an 11" MacBook Air.  When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer.  Is there another way to get the computer to recognize the adapter?  (It works with my MacBook Pro)

    Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
    If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
    -USB-to-VGA
    http://www.cablestogo.com/product/30545
    -Convert s-video or composite video signals to high resolution VGA
    http://www.cablestogo.com/product/40971
    The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
    el7

  • Computer doesn't recognize my printer since upgrade

    my computer doesn't recognize my printer since upgrade to yosemite

    Hi ..
    Try a reset >  Mac OS X: How to reset the printing system
    If a reset doesn't help, visit the website for your printer manufacture then search for v10.10 Yosemite drivers to download and install.

  • Computer doesn't recognize administrator password.  How to override or reset?

    Computer doesn't recognize administrator password.  How to override or reset?

    You cannot override but you can chage it, the approach depends on the Mac OS X you are using.

  • My computer doesn't recognize my Zen Creative Vision:M (30 GB) anymore

    ? I still use XP and I have this mp3-player for a year now and it has been working fine until yesterday. I ripped Stefani's first album and tried to drag one of her songs on my mp3-player, but the player couldn't handle the file it seemed. So it fell out, on, out, on and I just unplugged it. Then I plugged it back in, but ever since my computer doesn't recognize it (in the media explorer it also says it's not plugged in). The videos in my library also seemed to be missing all of the sudden (only the maps remained).. and?I re-installed every programm, including windows media player, and the only outcome of it is that my computer now labels it as a MTP Media Player. So now it does connect, but i still can't transfer files or get into the player's system.
    It's strange, because many people have encountered this problem and the solutions seem to vary; one even solved it by simply re-installing WMP, which didn't work for me.
    Help would be awesome, guys!

    From the recovery screen do a Clean-up,reboot. If you have copies of all your music you may need to Format the player (do not choose reload firmware or anything like that)? http://forums.creative.com/creativel...scending&page=

  • My computer doesn't recognize my SD card! what can I do?

    When I insert my SD card from my camera, the computer doesn't recognizes it. What can I do?
    thnx

    try a diff. SD card.   What then?   Tried an SD card to USB reader to verify if the SD card slot is bad?

  • Why is my computer doesn't recognize my Ipod Touch?

    My computer doesn't recognize my Ipod Touch. Any suggestion?

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • There is a DVD stuck in my drive on my iMac, the computer doesn't recognize it's there, how do it get it out?

    There is a DVD stuck in my drive on my iMac, the computer doesn't recognize it. How do I get it out?  I was trying to burn some photos onto it. Some error camer up, and then I coudn't get it out.

    Hello, try holding the Mouse button down while booting up.

  • Hey my iPod is not showing up on iTunes and my computer doesn't recognize it. It runs out of battery very fast and only shows the 'Connect to iTunes" screen. What do I do?

    Hey my iPod is not showing up on iTunes and my computer doesn't recognize it. It runs out of battery very fast and only shows the 'Connect to iTunes" screen. What do I do?

    http://support.apple.com/kb/ht1808
    http://support.apple.com/kb/ts1567
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I just test drove a Lexus ES with the Entune system, and it not only didn't play the music I expected, it caused the iPod to become totally unresponsive, even my computer doesn't recognize it?  Is there a fix for this?

    I just test drove a Lexus ES with the Entune system, and it not only didn't play the music I expected, it caused the iPod to become totally unresponsive, even my computer doesn't recognize it?  Is there a fix for this?

    This problem sort of solved itself.  The iPod kept running until the battery went dead, and when I plugged it in to power this morning, it behaved normallyh.

Maybe you are looking for

  • Complete Check Box in Version

    Dear All User has entered values for version change, and he forgot to click the "complete" check box and saves the document. So release is not get effected. I want this "complete" check box to be mandatory, in the case of purchase order. Any user Exi

  • How to check, when the Maintenance Order was deleted

    Hello Experts,                       Can you please tell me of how to check for the maintenance order that when it was deleted and who has deleted that. If any T-Code is there or at the Table level also to check the requirement. Regards, Yawar Khan

  • How to rotate the view of numbers spreadsheet in iphone?

    Hi, I can rotate the veiw of numbers's spreadsheet in ipad but somehow the view in iphone didn't? is there any setting or that's the limitation of iphone?

  • Beforeparameterform trigger

    Hi, In the beforeparameterform trigger I call a store procedure passing a paramenter to the procedure, but I don' succeed in passing the paramenter to the trigger, is it possible to have a input form to pass the parameter to the trigger so that the t

  • Customizing HR Administrator 1.41

    We are trying to configure the HR Administrator scenario in R3 to be able to Start and Display processes in sap  EP 7.0 SP6.Somebody have any manual or tutorial about it? The Business Package we are using is HR Administrator 1.41 thanks.