Computer EXTREMELY slow after download

I have a Macbook Pro running Leopard. Last night I downloaded a large number of fonts (all free legal fonts, fyi ), although while it was downloading I was unsure of exactly how many I was downloading. When all was said and done it turned out there were about 30,000 fonts in the package. Although it was more than I was expecting, it was under a gig in file size so I didn't see any issues installing them. I installed all of them but last night had no issues. I turned off my computer when I went to sleep.
This morning I went to turn my computer on and found it to be EXTREMELY slow. It took 20 minutes for it to even turn on in the first place, it took 20 minutes to open the finder and its taken an hour for the library folder to open and I STILL can't get into it. Obviously the solution is to delete the fonts, but I can't do that if I can't get into the font folder.
Is there a way to delete things in "safe mode" or something? Because obviously I can't do it through the standard display.

A suggestion: boot up from another OS that can read hfs+, then delete the offending fonts.
If you have a firewire HDD that has Mac OS X installed on it you can boot up from it by pressing "T" during bootup.
If you don't, try another OS. If I were you I would use Ubuntu, a linux OS. This will do absolutely no harm to your system at all, since it is booting from a live CD and is completely sandboxed. Go to http://ubuntu.com/ and download the live CD for free (700 MB) and burn it to a CD. Before you boot up from it you should disable journalling on your HDD, since Ubuntu can't write to journalled hfs+. You can do this from your Mac OS X install disc 1, which you boot up from (press "C" at startup to boot from CD), the Disk Utility application, selecting your drive and selecting "Disable Journalling" from the "File" menu.
Then reboot and boot from your Live CD. Say yes to everything until you get to the desktop. You don't have to install it (unless you want), just go to the "Places" button on the "menu bar" and select Macintosh HD, or whatever you named yours, navigate it normally and delete the files. Make sure to leave a few behind. Then restart by pressing the icon in the top right hand corner. This approach is completely harmless, and I have used it several times on my friends' Macs which needed access to files while the OS was down. After you have done all that you should enable journalling again
Hope this helps.

Similar Messages

Lightroom 4 suddenly extremely slow after download free trial of Lr5

Hi I have Lightroom 4 and last night I downloaded Lightroom 5 with a free trial for 30 days, but I couldn't work on that because was very slow, so I uninsalled Lr5, but now I can't work in my Lr4, it is extremely slow and it was perfect before. I have a MacBook Pro OS x Lion 10.75, 2.8 Ghz Intel Core i7, storage of 591GB free out of 749 and I have all my photos in an external drive "my passport" with 737 GB free out of 999 GB. Could you please help me??? I am very upset and desperate, I have been trying to work for 6 hours already, something that will take me only 30 minutes, and I can't even finish it. Please help me!! Thank you.

Get rid of Trusteer. It doesn’t work well under Mac OS.
Trusteer Rapport Uninstall
Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

The video downloading is extremely slow after downloading Flash Player Active X (IE) and FP Plug-in

I have Windows 7 on a 64-bit operating system, and have Firefox 19 and Internet Explorer 8. I tried installing Flash Player 11.6.602.171 from the Adobe Website and got an error message right at 47% download "can not contact reliable source." I also tried uninstalling whatever Flash Player I had, but I continued to get the same error message at 47% "can not contact reliable source." Finally, following the advice found in the link below under "Program Bar Hangs During Download," I downloaded Flash Player ActiveX (internet explorer) and Flash Player Plug-In (all other browsers). It appeared that both downloads were successful and I verified that the installation was complete in the link below under "Verify that installation is complete." It says I have Flash Player 11.6.602.171. My issue now is that whenever I watch videos that use Flash Player, the downloading of videos is extremely slow. For example, a 45 second youtube video might take 30 minutes to watch. I have tried everything (from General Info, Download Issues, Installation Issues, Post-Installation Issues) in this Adobe installation problem page http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html but the problem has not improved. Can someone please help me? It would be greatly appreciated. Thanks!

First, I went on this link under Progress Bar Hangs During Download
http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header
and then I downloaded Flash Player directly by clicking the links provided Flash Player for ActiveX (IE) and then Flash Player Plug-In (All browsers). After my installations were complete, I tried watching any youtube videos or videos on www.ABC.com and the loading of videos was extremely slow.

Computer extremely slow after Yosemite

Hi! My computer became very slow after updating to Yosemite. And when I try to force quit applications, I see that the one creating conflict is something called Safari (or sometimes MAIL) web content. I have no idea of what that is or why they are open or ...
I would appreciate all help. Thank you

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 461455494 3627668074 1083382502 1274181950 1855907737 1848501757 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 3301885676 891055588 998894468 695903914 4136085286 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' 's/^.+: //p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit sudo\ smcDiagnose );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D13 40 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help

my final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me. I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5

What did Apple tell you about what they did (or did not) find here?
See if working on the main disk is any faster.
USB2 is glacial, as I/O interconnects go. And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too. FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't.

My MacPro is extremely slow after upgrading to Yosemite 10.10, even while reading my newspaper on PDF

Problem description:
My Mac Pro is extremely slow after upgrading to Yosemite 10.10, even while reading my newspaper on PDF
This is my EtreCheck print
EtreCheck version: 2.0.11 (98)
Report generated 17. november 2014 kl. 10.49.28 CET
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: one day 15:45:13
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (290.89 GB free)
Encrypted AES-XTS UnlockedConverting
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] net.telestream.driver.TelestreamAudio (1.1.1 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Support
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Support
Launch Agents: ℹ️
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.torch.update.agent.plist Support
User Launch Agents: ℹ️
[loaded] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.ltvbit.plist Support
[loaded] com.genieo.completer.update.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 4.5.5f1 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User Internet Plug-ins: ℹ️
NPRoblox: Version: 1, 2, 8, 25 - SDK 10.10 Support
Google Earth Web Plug-in: Version: 7.1 Support
Safari Extensions: ℹ️
Omnibar
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 207.99 GB
Destinations:
Elements [Local]
Total size: 1.00 TB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Adequate
Backup size 1.00 TB > (Disk used 207.99 GB X 3)
Top Processes by CPU: ℹ️
      89% lsregister
      3% WindowServer
      1% mds
      1% sysmond
      0% mtmd
Top Processes by Memory: ℹ️
142 MB Preview
125 MB com.apple.WebKit.WebContent
125 MB Finder
86 MB ocspd
77 MB com.apple.WebKit.Plugin.64
Virtual Memory Information: ℹ️
335 MB Free RAM
1.63 GB Active RAM
1.32 GB Inactive RAM
776 MB Wired RAM
17.27 GB Page-ins
345 MB Page-outs

Check out this thread: https://discussions.apple.com/thread/6466590?start=0&tstart=0.
For many users, the Folder Action Dispatcher is the culprit that eats almost all available memory if it is enabled on ~/Library/LaunchAgents.

Blackberry Z10 became extremely slow after OS update to version 10.3.1.2243

Hi,
My Blackberry Z10 became extremely slow after OS update to version 10.3.1.2243. For example it sends text message 10-15 seconds after send button has been hit.
Can not answer the phone when a caller is calling (answer slide interface is unrespnsovie), if I want to launch any application screen turns black and nothing happens, etc.
Does anyone experience similar issues?
Thank you.
Michal.

Hi and Welcome to the Community!
A quick read of this site will answer your final question quite clearly. The "fix" depends on several factors, but given what you describe I recommend you immediately update, via AutoLoader, to the most recent version (.2582)...some of the prior versions contain some particularly challenging issues, which are reported to be fixed in this version.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Itunes starts extremely slow after an update of windows 8.1.

Itunes starts extremely slow after an update of windows 8.1.
It takes up to 10 minutus.
If I see the appliction log in event viewer then I see the following errors on the Bonjour service.
For instance:
Client application bug: DNSServiceResolve(a8:fa:d8:3a:1e:8f@fe80::aafa:d8ff:fe3a:1e8f._apple-mobdev2._t cp.local.) active for over two minutes. This places considerable burden on the network.
followed by
SendWakeupPacket error: sent -1 bytes: 10065
What can this be?
Already thanks,
John

I did all the step with save mode and that didn't gave the same result.
Then I created a new account and there itunes started up normally.
So I contued with the user section.
I removed the itunes directory from
c:\Users\username\AppData\Local\Apple Computer\iTunes
This gave the same result in not starting up.
Then I removed the itunes directory from
c:\Users\username\AppData\Roaming\Apple Computer\iTunes
The a popup appears that the Bonjour Service has been disabled.
I looked in services and saw that is was still running.
But I tried to restart this service and it took a long time to stop this service.
Even if I selected restart the Bonjour Service didn't start.
Manually starting was not a problem.
Clicking OK on the popup let itunes start quickly. And closing and starting it again was also quickly.
So Matt thanks for your answer.
If it happens again I have to see if it was the removing of the itunes directory from roaming or restarting the Bonjour Service.

Why is my mac mini running slow after downloading Yosemite?

My mac mini is running significantly slower after downloading Yosemite and I am wondering if it is to better to try to go back to an older operating system or if Apple is working on a fix for this.
Here is what I am Running it on:
Model Name: Mac mModel Identifier: Macmini3,1
                                    Processor Name Processor Name: Intel Core 2 Duo
                                   Processor Speed: 2.26 GHz
                                    Number of Processors: 1
                                    Total Number of Cores: 2
                                       L2 Cache: 3 MB
                                        Memory: 2 GB
                                        Bus Speed: 1.07 GHz
                                       Boot ROM Version: MM31.00AD.B00
                                        SMC Version (system): 1.35f1
                                           Hardware UUID: 2DF68C91-A8F8-536A-87EF-14DDEF6FAB32

I thought I had gotten rid of the HP shortcut manager and can no longer find it but when I re ran my Test it is still there. Were could it be hiding that I can not find it now?
EtreCheck version: 2.0.10 (97)
Report generated November 1, 2014 at 10:39:40 PM CDT
Hardware Information: ℹ️
Mac mini (Late 2009) (Verified)
Mac mini - model: Macmini3,1
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
Panasonic-TV spdisplays_720p
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 3 days 6:35:47
Disk Information: ℹ️
FUJITSU MHZ2160BH G1 disk0 : (160.04 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 159.18 GB (71.82 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5670S
USB Information: ℹ️
Sunplus Technology Co.,Ltd. USB to Serial-ATA bridge 1 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
ROCSTAR BACKUP (disk2s2) /Volumes/ROCSTAR BACKUP : 999.86 GB (848.90 GB free)
Eastman Kodak Company ESP Office 6100 Series AiO
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Firewire Information: ℹ️
0x30F0 ATA Device 00 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Time Machine (disk1s2) /Volumes/Time Machine : 145.52 GB (42.09 GB free)
Main Drive 2 (disk1s3) /Volumes/Main Drive 2 : 854.21 GB (699.03 GB free)
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.sbd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.diagnosticd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.installd.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.coupons.coupond.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
[running] com.kodak.BonjourAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.backblaze.bzserv.plist Support
[running] com.google.keystone.daemon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
User Launch Agents: ℹ️
[running] com.backblaze.bzbmenu.plist Support
[invalid?] com.google.GoogleContactSyncAgent.plist Support
[loaded] com.kodak.KODAK AiO Firmware Updater.plist Support
[loaded] com.kodak.KODAK AiO Software Updater.plist Support
[running] com.kodak.StatisticCollection.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
HPShortcutManager Application (/Library/Application Support/Hewlett-Packard/HP Scanjet Scanner/HPShortcutManager.app)
Google Chrome ApplicationHidden (/Users/[redacted]/Desktop/Google Chrome.app)
Alfred Application (/Applications/Alfred.app)
Printer Pro Desktop Application (/Applications/Printer Pro Desktop.app)
Google Software Update Application (/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/Contents/Reso urces/GoogleSoftwareUpdateAgent.app)
HPShortcutManager Application (/Library/Application Support/Hewlett-Packard/HP Scanjet Scanner/HPShortcutManager.app)
HPShortcutManagerStartup Application (/Library/Application Support/Hewlett-Packard/HP Scanjet Scanner/HPShortcutManagerStartup.app)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.9r620 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
Google Earth Plugin: Version: 5.1 Support
RealPlayer Plugin: Version: (null) Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: Unknown
CouponPrinter-FireFox_v2: Version: 5.0.3 - SDK 10.6 Support
Photo Center Plugin: Version: Photo Center Plugin 1.1.2.2 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
Move_Media_Player: Version: npmnqmp 07103007 Support
fbplugin_1_0_1: Version: (null) Support
fbplugin_1_0_3: Version: (null) Support
3rd Party Preference Panes: ℹ️
Backblaze Backup Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 159.18 GB Disk used: 87.36 GB
Destinations:
Main Drive [Local]
Total size: 999.86 GB
Total number of backups: 2
Oldest backup: 2013-04-03 01:58:20 +0000
Last backup: 2013-05-15 17:53:48 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 159.18 GB X 3)
Top Processes by CPU: ℹ️
      99% HPShortcutManager
      7% WindowServer
      0% coreduetd
      0% bzserv
      0% AppleSpell
Top Processes by Memory: ℹ️
60 MB Mail
34 MB WindowServer
28 MB Google Chrome
28 MB Safari
26 MB mds
Virtual Memory Information: ℹ️
116 MB Free RAM
360 MB Active RAM
362 MB Inactive RAM
514 MB Wired RAM
82.08 GB Page-ins
1.99 GB Page-outs

My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd.

My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd. Earlier I thought this behavior is due to spotlight indexing but it finished after 3 days. I deleted all caches from library. But no luck, still running extremely slow. I checked activity monitor for cpu usage, it shows above 90% is idle. The memory usage always shows PM - 4 GB, Memory Used 3.96 GB, VM - 4 GB, Swaped used 0 bytes, App Memory 1.82 GB, File Cache 1.44 GB, Wired Memory 480 MB.
Thanks in adavnce for help.

Was it the combo updater that was installed or the OS X 10.9.3 update. There is a difference.
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.8.4 install from a regular update, just run the 10.8.4 Combo Updater on that system.
"Delta" updaters can only take you from one version to the next. For example: 10.9.1 to 10.9.2. If somehow the 10.9.2 is missing something it should have, and that something isn't changed between 10.9.1 and 10.9.2 it will still be stale after the delta update.

IPhoto is extremely slow after upgrading to OSX Maveric

Has anyone noticed that iPhoto is extremely slow after upgrading to OSX Maverick

I've noticed that it isn't.
There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

I am trying to reinstall Master Collection after a computer crash and after download it will not accept the serial number that it lists on my purchased products. The purchase was in 2012.

I am trying to reinstall Master Collection after a computer crash and after download it will not accept the serial number that it lists on my purchased products. The purchase was in 2012.The message says the serial number is invalid. What do I do nest?

Hi there,
Please see help here - https://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
If still you are facing problem, I would recommend to reach out to support through the link which is available at the bottom of the support page.
^Ani

Running slow after downloading a mandatory update

running slow after downloading an update!
I had zero complaints until today when I downloaded an update and restarted my machine.
Now It feels like I'm back in the PC world.
Any suggestions?

If it is Safari loading web pages slowly, I would suggest http://support.apple.com/kb/ts3230 or http://support.apple.com/kb/TS1594, one of these will surely help. If not, as previously suggested, more detail will greatly help.

I am using iPhone 5C. My wifi is extremely slow after upgrade to ios8. Buffering online video and songs taking forever. What's going on?

I am using iPhone 5C. My wifi is extremely slow after upgrade to ios8. Buffering online video and songs taking forever. What's going on?

I have same problem. Reboot helps for a few minutes.

Slow after download and installing Aperture 3 on my Mac with OS X Lion 10.7.3. Have any one else same experience and an idea of how to solve the problem ?

My recently bought and up to date MacBook Pro 17" became very slow after downloading and installing Aperture 3. Is there onyone out there who have experienced the same problem and have an idea of how to go about fixing the problem ?

Are you experiencing the slowness only when you are running Aperture or all the time since you installed it?
Have you done anything with Aperture, imported images, iPhoto library etc?
How much memory is in your system? Did you have any external disks attached? How big and how much free space is there on your internal disk?

Computer EXTREMELY slow after download

Similar Messages

Maybe you are looking for