Computer freezes after connecting zen mi

I formated my computer about a week ago and I didn't connect my micro to computer since then.
But today I install everything that is on CD that came with zen micro and when I plug USB cable ito micro the computer freezes. And I mean FREEZES, I have to reset it because the mouse and anything else is not working.
I've tried it on another computer and it was recognized without problems. So the problem is in my computer.
I have .02.05 firmware on the player.
Did anyone have this problem?

A freezing PC suggests a serious hardware and/or software problem. As it works on another PC obviously the Micro isn't directly at fault, although it could be a USB incompatibility with this PC. USB incompatibilities are always a pain to diagnose, so if you don't mind spending a little extra money you might find a PCI USB card a quick solution. Make sure to get a known good card i.e. Belkin or Adaptec.
Failing this, and if you don't want to get a PCI USB card just yet, there's lots of connection troubleshooting advice here in the Zen FAQ at Nomadness.net.

Similar Messages

HT3964 My computer freezes after running for about 15 min even after setting the energy saving to 3 hours

My Mac computer freezes after running for 15 min even after seeting the energy saving to 3 hours. Any ideas how to stop the freezing/

Hi Teodorafrombc,
Thanks for visiting Apple Support Communities.
If your computer is becoming unresponsive, you may want to see if specific applications are causing this behavior. Try using the Force Quit menu to check for unresponsive applications:
Using the Force Quit feature of OS X makes an application close, even when it is not responsive.
Important: Normally you should not need to force quit an app to close it. When an app is forced to quit, any unsaved changes to open documents are not saved, so try these methods to normally close the app first:
Choose Quit from the app menu. For example, in Safari, choose Safari > Quit Safari.
Choose Quit by right-clicking or control-clicking on an app's icon in the Dock
You can find the article with these steps here:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
If your display is going blank or seems to be going to sleep unexpectedly, try these steps first:
Reset the system
You can reset the Mac's parameter RAM and SMC.
You can find the article with these steps and more information here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
If these steps don't resolve the issue, feel free to reply with more information about the symptoms you are experiencing.
Best,
Jeremy

Computer freezes after going into sleep mode

My computer freezes after being left idle and I am prompted to restart. I have the screen saver set to view the nature pictures, but that doesn't show. The screen goes blank and then I have to restart. I've read about sleep problems, but not a solution. Have any? Thanks! ~M
Dual 867 G4 Mac OS X (10.4.3)

Hello Dean,
Yes, the restart prompt looks like the kernel panic alert screen. And I did accesss the panic.log and it doesn't mean much to me! Here is what I copied from the two crashes today:
Mon Dec 12 11:19:08 2005
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000008 PC=0x000000000012C76C
Latest crash info for cpu 0:
Exception state (sv=0x2D53AA00)
PC=0x0012C76C; MSR=0x00009030; DAR=0x00000008; DSISR=0x40000000; LR=0x0012C7A4; R1=0x177439D0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0012C7A4 0x0012E020 0x0012F4A4 0x0012D310 0x0012F014 0x0028FDA8
0x00281698 0x0027D238 0x0027CF74 0x002A9BF4 0x000ABE30 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x2D53AA00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3C5FC780)
PC=0x9001452C; MSR=0x0000F030; DAR=0xE07FF000; DSISR=0x42000000; LR=0x0000CFAC; R1=0xF0080040; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095698 0x00095BB0 0x0002683C 0x000A8304 0x000ABC80
Proceeding back via exception chain:
Exception state (sv=0x2D53AA00)
PC=0x0012C76C; MSR=0x00009030; DAR=0x00000008; DSISR=0x40000000; LR=0x0012C7A4; R1=0x177439D0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0012C7A4 0x0012E020 0x0012F4A4 0x0012D310 0x0012F014 0x0028FDA8
0x00281698 0x0027D238 0x0027CF74 0x002A9BF4 0x000ABE30 0x00000000
Exception state (sv=0x3C5FC780)
PC=0x9001452C; MSR=0x0000F030; DAR=0xE07FF000; DSISR=0x42000000; LR=0x0000CFAC; R1=0xF0080040; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Mon Dec 12 12:44:48 2005
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000008 PC=0x000000000012C76C
Latest crash info for cpu 0:
Exception state (sv=0x2D53AA00)
PC=0x0012C76C; MSR=0x00009030; DAR=0x00000008; DSISR=0x40000000; LR=0x0012C7A4; R1=0x177439D0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0012C7A4 0x0012E020 0x0012F4A4 0x0012D310 0x0012F014 0x0028FDA8
0x00281698 0x0027D238 0x0027CF74 0x002A9BF4 0x000ABE30 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x2D53AA00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3C5FC780)
PC=0x9001452C; MSR=0x0000F030; DAR=0xE07FF000; DSISR=0x42000000; LR=0x0000CFAC; R1=0xF0080040; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095698 0x00095BB0 0x0002683C 0x000A8304 0x000ABC80
Proceeding back via exception chain:
Exception state (sv=0x2D53AA00)
PC=0x0012C76C; MSR=0x00009030; DAR=0x00000008; DSISR=0x40000000; LR=0x0012C7A4; R1=0x177439D0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0012C7A4 0x0012E020 0x0012F4A4 0x0012D310 0x0012F014 0x0028FDA8
0x00281698 0x0027D238 0x0027CF74 0x002A9BF4 0x000ABE30 0x00000000
Exception state (sv=0x3C5FC780)
PC=0x9001452C; MSR=0x0000F030; DAR=0xE07FF000; DSISR=0x42000000; LR=0x0000CFAC; R1=0xF0080040; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
I'll check into Dr. Smoke's FAQ, and see if I can decipher any of it.
Let me know what the above text means to you.
Thanks again~
Michelle
Dual 867 G4 Mac OS X (10.4.3)

ITunes 12.0.1.26 freezes after connecting iDevices

iTunes 12.0.1.26 freezes after connecting iDevices, iphone 6, ipod and ipad

13/1/15 23:35:55,720 iTunes[425]: Entered:_AMMuxedVersion2DeviceConnected, mux-device:2
13/1/15 23:35:55,725 iTunes[425]: tid:117 - unable to query device capabilities
13/1/15 23:35:55,971 com.apple.usbmuxd[51]: LOCKDOWN_V2_BONJOUR_SERVICE_NAME is _apple-mobdev2._tcp,8e6607c1
13/1/15 23:35:58,314 com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.domain.pid.MediaLibraryService.441) Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/MediaLibrary.framework/Versions/A/XPCServices/com.ap ple.MediaLibraryService.xpc
13/1/15 23:35:58,315 com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.domain.pid.MediaLibraryService.441) Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/MediaLibrary.framework/Versions/A/XPCServices/com.ap ple.MediaLibraryService.xpc
13/1/15 23:35:58,872 com.apple.MediaLibraryService[441]: Preflight for plugin com.apple.ILPhotosPlugin failed, so it will not load. Error Domain=NSCocoaErrorDomain Code=3587 "The bundle “iLMBPhotosPlugin” couldn’t be loaded because it is damaged or missing necessary resources." (dlopen_preflight(/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin): Library not loaded: /System/Library/PrivateFrameworks/PhotoLibraryPrivate.framework/Versions/A/Phot oLibraryPrivate
Referenced from: /Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin
Reason: image not found) UserInfo=0x7fba1bd243a0 {NSLocalizedFailureReason=The bundle is damaged or missing necessary resources., NSLocalizedRecoverySuggestion=Try reinstalling the bundle., NSFilePath=/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin, NSDebugDescription=dlopen_preflight(/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin): Library not loaded: /System/Library/PrivateFrameworks/PhotoLibraryPrivate.framework/Versions/A/Phot oLibraryPrivate
Referenced from: /Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin
Reason: image not found, NSBundlePath=/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin, NSLocalizedDescription=The bundle “iLMBPhotosPlugin” couldn’t be loaded because it is damaged or missing necessary resources.}
13/1/15 23:35:58,903 com.apple.SecurityServer[52]: Session 100028 created
13/1/15 23:36:00,129 SyncServer[443]: [0x7fc8e2c19df0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 275261014016 bytes free in tatianarodriguez.
13/1/15 23:36:00,131 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[443]) Service exited with abnormal code: 1
13/1/15 23:36:01,201 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:36:01,355 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:36:06,323 com.apple.xpc.launchd[1]: (com.apple.PhotoApps.AVCHDConverter) Unknown key for dictionary: EnvironmentVarialbles
13/1/15 23:36:06,323 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
13/1/15 23:36:09,075 WindowServer[121]: disable_update_timeout: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
13/1/15 23:36:09,294 WindowServer[121]: common_reenable_update: UI updates were finally reenabled by application "iPhoto" after 1.22 seconds (server forcibly re-enabled them after 1.00 seconds)
13/1/15 23:36:10,509 SyncServer[449]: [0x7fcc79d074e0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 275260944384 bytes free in tatianarodriguez.
13/1/15 23:36:10,510 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[449]) Service exited with abnormal code: 1
13/1/15 23:36:11,370 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:36:11,526 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:36:13,474 WindowServer[121]: Received display connect changed for display 0x4272902
13/1/15 23:36:13,484 WindowServer[121]: Found 34 modes for display 0x04272902 [34, 0]
13/1/15 23:36:13,505 WindowServer[121]: Received display connect changed for display 0x3f003f
13/1/15 23:36:13,505 WindowServer[121]: Found 1 modes for display 0x003f003f [1, 0]
13/1/15 23:36:13,505 WindowServer[121]: Received display connect changed for display 0x3f0040
13/1/15 23:36:13,505 WindowServer[121]: Found 1 modes for display 0x003f0040 [1, 0]
13/1/15 23:36:13,506 WindowServer[121]: Received display connect changed for display 0x3f0041
13/1/15 23:36:13,506 WindowServer[121]: Found 1 modes for display 0x003f0041 [1, 0]
13/1/15 23:36:13,507 WindowServer[121]: CGXMuxAcknowledge: Posting glitchless acknowledge
13/1/15 23:36:13,524 WindowServer[121]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04272902 device: 0x7f8390d0ad20 isBackBuffered: 1 numComp: 3 numDisp: 3
13/1/15 23:36:13,551 WindowServer[121]: Received display connect changed for display 0x4272902
13/1/15 23:36:13,552 WindowServer[121]: Found 1 modes for display 0x04272902 [1, 0]
13/1/15 23:36:20,556 SyncServer[452]: [0x7fc931e074e0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274186420224 bytes free in tatianarodriguez.
13/1/15 23:36:20,556 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[452]) Service exited with abnormal code: 1
13/1/15 23:36:21,548 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:36:21,703 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:36:22,707 CoreServicesUIAgent[258]: unexpected message <OS_xpc_error: <error: 0x7fff7abcfc60> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff7abcff70> { length = 18, contents = "Connection invalid" }
}>
13/1/15 23:36:22,831 WindowServer[121]: Received display connect changed for display 0x4272902
13/1/15 23:36:22,837 WindowServer[121]: Found 17 modes for display 0x04272902 [17, 0]
13/1/15 23:36:22,878 WindowServer[121]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04272902 device: 0x7f8390d0ad20 isBackBuffered: 1 numComp: 3 numDisp: 3
13/1/15 23:36:22,885 WindowServer[121]: CGXMuxAcknowledge: Posting glitchless acknowledge
13/1/15 23:36:22,897 WindowServer[121]: Received display connect changed for display 0x4272902
13/1/15 23:36:22,897 WindowServer[121]: Found 1 modes for display 0x04272902 [1, 0]
13/1/15 23:36:22,898 WindowServer[121]: Received display connect changed for display 0x3f003f
13/1/15 23:36:22,898 WindowServer[121]: Found 1 modes for display 0x003f003f [1, 0]
13/1/15 23:36:22,898 WindowServer[121]: Received display connect changed for display 0x3f0040
13/1/15 23:36:22,898 WindowServer[121]: Found 1 modes for display 0x003f0040 [1, 0]
13/1/15 23:36:22,898 WindowServer[121]: Received display connect changed for display 0x3f0041
13/1/15 23:36:22,898 WindowServer[121]: Found 1 modes for display 0x003f0041 [1, 0]
13/1/15 23:36:30,755 SyncServer[453]: [0x7fd261607420] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188038144 bytes free in tatianarodriguez.
13/1/15 23:36:30,756 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[453]) Service exited with abnormal code: 1
13/1/15 23:36:31,728 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:36:31,880 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:36:40,903 SyncServer[454]: [0x7f9bf04198f0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188038144 bytes free in tatianarodriguez.
13/1/15 23:36:40,904 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[454]) Service exited with abnormal code: 1
13/1/15 23:36:41,900 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:36:42,055 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:36:51,081 SyncServer[455]: [0x7fb922507c90] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188029952 bytes free in tatianarodriguez.
13/1/15 23:36:51,081 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[455]) Service exited with abnormal code: 1
13/1/15 23:36:52,086 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:36:52,238 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:37:01,265 SyncServer[456]: [0x7f8edad07c90] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187849728 bytes free in tatianarodriguez.
13/1/15 23:37:01,266 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[456]) Service exited with abnormal code: 1
13/1/15 23:37:02,256 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:37:02,408 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:37:11,435 SyncServer[457]: [0x7f9ae1c198f0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187849728 bytes free in tatianarodriguez.
13/1/15 23:37:11,435 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[457]) Service exited with abnormal code: 1
13/1/15 23:37:12,441 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:37:12,595 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:37:21,621 SyncServer[458]: [0x7ffb6bc19b40] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187485184 bytes free in tatianarodriguez.
13/1/15 23:37:21,621 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[458]) Service exited with abnormal code: 1
13/1/15 23:37:22,625 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:37:22,780 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:37:31,804 SyncServer[459]: [0x7f91da507c90] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187485184 bytes free in tatianarodriguez.
13/1/15 23:37:31,805 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[459]) Service exited with abnormal code: 1
13/1/15 23:37:32,800 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:37:32,957 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:37:41,984 SyncServer[460]: [0x7fa46bc19b40] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187468800 bytes free in tatianarodriguez.
13/1/15 23:37:41,984 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[460]) Service exited with abnormal code: 1
13/1/15 23:37:42,987 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:37:43,140 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:37:52,168 SyncServer[461]: [0x7fb7e0c19b40] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187464704 bytes free in tatianarodriguez.
13/1/15 23:37:52,169 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[461]) Service exited with abnormal code: 1
13/1/15 23:37:53,160 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:37:53,317 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:38:02,346 SyncServer[462]: [0x7fcd20e079e0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187464704 bytes free in tatianarodriguez.
13/1/15 23:38:02,347 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[462]) Service exited with abnormal code: 1
13/1/15 23:38:03,333 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:38:03,490 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:38:12,513 SyncServer[463]: [0x7f8502e077c0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187440128 bytes free in tatianarodriguez.
13/1/15 23:38:12,514 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[463]) Service exited with abnormal code: 1
13/1/15 23:38:13,512 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:38:13,666 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:38:22,689 SyncServer[464]: [0x7fa469419b40] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188554240 bytes free in tatianarodriguez.
13/1/15 23:38:22,690 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[464]) Service exited with abnormal code: 1
13/1/15 23:38:23,682 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:38:23,838 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:38:32,864 SyncServer[465]: [0x7fe0b04199f0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188554240 bytes free in tatianarodriguez.
13/1/15 23:38:32,865 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[465]) Service exited with abnormal code: 1
13/1/15 23:38:33,864 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:38:34,016 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:38:43,042 SyncServer[466]: [0x7fca1ac19b40] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188496896 bytes free in tatianarodriguez.
13/1/15 23:38:43,043 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[466]) Service exited with abnormal code: 1
13/1/15 23:38:44,045 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:38:44,198 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:38:53,225 SyncServer[467]: [0x7fcfe9d07790] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188496896 bytes free in tatianarodriguez.
13/1/15 23:38:53,226 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[467]) Service exited with abnormal code: 1
13/1/15 23:38:54,222 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:38:54,378 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:39:03,406 SyncServer[468]: [0x7fbd016074e0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188492800 bytes free in tatianarodriguez.
13/1/15 23:39:03,407 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[468]) Service exited with abnormal code: 1
13/1/15 23:39:04,398 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:39:04,549 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:39:09,949 sharingd[221]: 23:39:09.948 : Starting Handoff advertising
13/1/15 23:39:13,578 SyncServer[469]: [0x7ff213507c90] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188419072 bytes free in tatianarodriguez.
13/1/15 23:39:13,579 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[469]) Service exited with abnormal code: 1
13/1/15 23:39:14,583 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:39:14,739 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:39:19,342 sharingd[221]: 23:39:19.342 : Starting Handoff advertising
13/1/15 23:39:20,635 sharingd[221]: 23:39:20.635 : Starting Handoff advertising
13/1/15 23:39:22,640 sharingd[221]: 23:39:22.639 : Stopping Handoff advertising
13/1/15 23:39:23,763 SyncServer[470]: [0x7ff141419920] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188398592 bytes free in tatianarodriguez.
13/1/15 23:39:23,764 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[470]) Service exited with abnormal code: 1
13/1/15 23:39:24,760 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:39:24,912 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:39:25,587 Office365Service[471]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.1 instead of 10.10.1. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
13/1/15 23:39:25,588 Office365Service[471]: 0   CarbonCore                          0x987a97e7 ___Gestalt_SystemVersion_block_invoke + 135
13/1/15 23:39:25,588 Office365Service[471]: 1   libdispatch.dylib                   0x99d84130 _dispatch_client_callout + 50
13/1/15 23:39:25,588 Office365Service[471]: 2   libdispatch.dylib                   0x99d840b5 dispatch_once_f + 251
13/1/15 23:39:25,588 Office365Service[471]: 3   libdispatch.dylib                   0x99d850d8 dispatch_once + 31
13/1/15 23:39:25,588 Office365Service[471]: 4   CarbonCore                          0x9873bfb8 _Gestalt_SystemVersion + 1050
13/1/15 23:39:25,588 Office365Service[471]: 5   CarbonCore                          0x9873bb69 Gestalt + 150
13/1/15 23:39:25,588 Office365Service[471]: 6   Office365Service                    0x000589a3 Office365Service + 358819
13/1/15 23:39:33,939 SyncServer[472]: [0x7fcec36076c0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188382208 bytes free in tatianarodriguez.
13/1/15 23:39:33,940 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[472]) Service exited with abnormal code: 1
13/1/15 23:39:34,937 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:39:35,094 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:39:44,124 SyncServer[473]: [0x7ffb386076c0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188451840 bytes free in tatianarodriguez.
13/1/15 23:39:44,125 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[473]) Service exited with abnormal code: 1
13/1/15 23:39:45,103 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:39:45,258 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.

After installing 10.9.4 computer freezes after sleep

After I installed 10.9.4, my Imac bean to freeze after being asleep. Sometimes I can move the mouse, but it has no effect on anything. Most of the time I move the mouse or keyboard and I get eh color wheel of death. Here is my info, can you help?
EtreCheck version: 1.9.12 (48)
Report generated August 6, 2014 at 7:06:43 PM MDT
Hardware Information:
iMac (27-inch, Mid 2010) (Verified)
iMac - model: iMac11,3
1 2.93 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
ATI Radeon HD 5750 - VRAM: 1024 MB
iMac 2560 x 1440
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 5:12:25
Disk Information:
WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 902.82 GB (631.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 84.56 GB (38.76 GB free)
PIONEER DVD-RW DVRTS09
USB Information:
Apple Inc. iPhone
Logitech USB Receiver
Apple Internal Memory Card Reader 31.91 GB
NIKON D7000 (disk1s1) /Volumes/NIKON D7000: 31.91 GB (28.3 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Fitbit Inc. Fitbit Base Station
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
G-TECH OEM ATA Device 00 800mbit - 800mbit max
EFI (disk2s1) <not mounted>: 209.7 MB
G-DRIVE (disk2s2) /Volumes/G-DRIVE: 999.86 GB (937.8 GB free)
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] arcana.PRAM (6.1) Support
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.52) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) Support
Startup Items:
ArcanaStartupSound: Path: /Library/StartupItems/ArcanaStartupSound
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[running] com.crashplan.engine.plist Support
[running] com.fitbit.galileod.plist Support
[failed] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.rim.BBDaemon.plist Support
[loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
[failed] com.vmware.launchd.vmware.plist Support
[not loaded] com.vsearch.daemon.plist Support
[failed] com.vsearch.helper.plist Support
Launch Agents:
[loaded] com.avast.userinit.plist Support
[failed] com.google.keystone.agent.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[failed] com.vsearch.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.avast.home.userinit.plist Support
[running] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items:
SpeechSynthesisServer
Canon IJ Network Scanner Selector EX
Dropbox
CrashPlan menu bar
Fitbit Connect Menubar Helper
Internet Plug-ins:
Easy-WebPrint EX: Version: 1.1.0 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Silverlight: Version: 5.1.10516.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.10 Support
npDDRia: Version: 0.0.14.2 - SDK 10.9 Support
EPPEX Plugin: Version: 3.0.5.0 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
avast! Online Security: Version: 9.0.2022.120
1Password: Version: 4.2.3
Dragon Dictate: Version: 12.81.000.006
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Secrets Support
ArcanaStartupSound Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 840.81 GB Disk used: 252.37 GB
Destinations:
G-DRIVE [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 33
Oldest backup: 2014-03-03 19:34:10 +0000
Last backup: 2014-03-13 00:00:27 +0000
Size of backup disk: Adequate
Backup size 931.19 GB > (Disk used 252.37 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      1% WindowServer
      1% fontd
      1% CrashPlan menu bar
      0% Fitbit Connect Menubar Helper
      0% Dropbox
Top Processes by Memory:
164 MB softwareupdated
131 MB mds_stores
131 MB com.avast.daemon
123 MB CrashPlanService
106 MB Finder
Virtual Memory Information:
4.89 GB Free RAM
1.83 GB Active RAM
525 MB Inactive RAM
781 MB Wired RAM
1.96 GB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$ \$.+\$/\\\2x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded, now computer freezes after trying to load everything. possible to reverse this? options? restore hd from time machine? pls help!!!

long story short...i attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded to my desktop and now my computer freezes up after trying to load everything, and i'm not able to just drag the photos into the folder. is it possible to reverse this? what are my options? restore hd from time machine?
a further question to restoring my hd from a previous backup on time machine...it says it will erase the hd. does it actually erase everything or does it just erase anything that may have been added or downloaded since that backup? this is confusing to me.
another problem which is part of the original problem is it seems that when i connect my iphone to my computer and iphoto uploads my pics...it doesn't just upload new ones, it duplicates and uploads every picture again...which is why i have 45,000 pics...they are 40,000 duplicates! what's up with that?
I have a macbook pro, and recently updated the os to Yosemite. the iphoto app is out of date, but i'll worry about that once i can figure out how to get all those pics off the desktop. also, i recently purchased and installed 8g of new ram, but that hasn't seemed to help.
any advice would be appreciated!
thanks!!

thanks for replying.
the booting and walking away and then attempting to browse and clean method is what i've been trying to do. it won't let me drag and drop and just freezes up and goes to sleep after 2 minutes. it's a never ending battle with very few results. which is why i questioned the method of just restoring the hd from a time machine backup.
do you think restoring the hd from time machine will resolve the issue with all pics on the desktop? and everything will be as it was from the date i restore it from? sorry, as you can tell, i'm not overly computer savvy.
i have a really old desktop mac...i can try connecting the two...how does one boot a mac in 'target mode'?
as for the iphoto cleaning and organizing issue...that is what i was trying to accomplish with importing them to a folder. was going to browse and clean from there...but somehow imported to desktop which is what's complicating everything. once i get them off the desktop i can work on the iphoto issue...which as i mentioned...i didn't take 45,000 pics...i've just taken about 4,500 over the last few years, and they are being duplicated in iphoto. this was my attempt to clean it out entirely and start over. it will basically be a lot of deleting.
one problem, seems to lead me to more...which is just my luck. :-)
thanks again, for your help.

Itunes freezes after connecting ipod

This is a second problem I have been having before the whole computer freezing up. When I run itunes by itself it wrks fine, but when I connect the ipod itunes stops responding after about 5 to 8 seconds. It's itunes version 7.0.2 with a 5th gen ipod.
Help!
Windows XP

I Have the same Problem. I connecteda brandnew iPod 30GB. When I connect it. It is found by iTunes. The screen with Overview|Music|.... appears and nothing is going on anymore. If You got an answer plase forward to me. [email protected]

My Keyboard and Mouse freeze after connecting USB device

In the past few weeks I got this situation where my MacBook Air (13" Late 2010 model) would stop responding to the keyboard and trackpad after I connect a USB device (like an external hard disk, or even my iPhone).
I found one (quite inconvenient) solution: if I connect an external USB mouse and keyboard they work, and after a while the built in trackpad and keyboard start working again. But if I do not have an external mouse and keyboard around me, I am quite stuck and only a reboot fixes the situation.
Any idea what might be causing this, or if there is any solution? It is clearly a software issue, as the hardware can be returned to normal state after reboot.
Note: I have the latest OS - Mac OS X Lion 10.7.3 (11D50) and regularly update my software.

I have the same issue, on the same model (late 2010 13" MBA).
I haven't been able to figure out a solution either. Strangely, I recently bought a USB external drive and it *never* causes a freeze upon connection. Only smaller devices (iPod, iPad, FitBit, USB stick) cause it. I need to reboot the computer with the device attached to be able to access it.

Computer freezes after idle after installing yosemite

I would like to know if there is a way to uninstall yosemite and go back to mountain lion, everytime I come back from idle my mini mac freezes and I have to constantly restart my mini mac to get it to work

You can downgrade by repartitioning the drive, then reinstalling Mountain Lion from your backup made prior to installing Yosemite. If you have no backup then you can use Internet Recovery if your hardware supports it: Computers that can be upgraded to use OS X Internet Recovery.
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.
If your model does not support the above, then you must install Snow Leopard:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. You can then upgrade to Mountain Lion provided you have a Mountain Lion installer.

Computer freezes after Post (Cannot load/re-install windows)

Hi!
I have the K8T Neo-FIS2R motherboard 1.7 bios with an AMD Athlon 64 3000+ The computer loads up correctly, sees all of the memory, both CD rom drives, and both hard drives. However, after the post my computer goes to the Load win XP in safe mode etc. and the computer freezes right there. Also, when i try to reinstall windows XP, I just get past the boot from CD option and when it says setup is examining system hardware, it freezes at this screen and will not go any further; also when it does this, my numlock key blinks for some reason. Any answers???

Quote
Originally posted by MSUHattrick
fixed... just had to disable Legacy USB support
That would have been our next route.. haha
Good to hear, bro.
Ian

Explorer and Computer freezes after installation of Creative Cloud

First I had a hard time installing the programs, because the downloads always froze and I had to do it over and over. From the first start of the adobe application manager my computer were stopping, froze in and did not shut down anymore. And I have trouble using the internet, because my explorer is freezing all the time, too. Than I have to restart the whole system, until it freezes again. And the Computer as always been resetted the hard way, what brings up the Windows "the computer did not shut down..." screen and is really anoying.
System HP with 10 Gigs Memory, Intel I7 quad processor, 3600 mhz, Windows 7, NVIDIA 620

No issus with Win 7 before, no error messages. The computer starts normal, stays normal, as long as I do not use one of the Adobe products. I can start all programs, work with the programs, go into the internet, shut it down normal. As soon as I work with a application from adobe, I can use the programs, work with them , but as soon, as I try to go to the internet, i get no connection. Shutting down does not work, the computer freezes on the "shutting down" screen. Disconect power, start again, I can find no other reason than the Adobe Application manager, but creative cloud needs this thing on to work. As long as this thing is not in use, every thing is normal. I was trying ti re-install , but it did not change. The manager also keeps to "forget" my Adobe ID and is asking for it over and over.

Computer Freezes after 5 minutes or less of uptime

iMac g5 17" Ambient Light Sensor
1.8 ghz, 512 mb ram, 160 gb hd
Computer randomly freezes after 5 minutes or less of uptime, regardless of what it is doing.
Even freezes during Apple Hardware Test
Changed memory
Reset PRAM
Replaced HD
Removed CD Drive
Tested power supply - perfect working condition
I started in verbose mode and this is what I got. Can anyone help me out with what it is telling me?
standard timesplicing quantum is 1000 us
vmpagebootstrap: 124531 free pages
migtable_maxdispl = 70
91 prelinked modules
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
using 1310 buffer headers and 1310 cluster IO buffer headers
AppleKauaiATA shasta-ata features enabled
DART enabled
USB caused awake event (EHCI)
FireWire (OHCI) Apple ID 52 built-in now active, GUID 001124ff feccbeba; max speed s400
CSRHIDTransitionDriver::probe: -v
CSRHIDTransitionDriver::start before command
Security auditing service present
BSM auditing present
disabled
rooting via boot-uuid from /chosen: 219A46D4-EC3D-3CAC-8CCF-FFFF41F7635A
Waiting on <dict ID="0"><key>IOProviderClass</key><stringID="1">IOResources</string><key>IOResou rceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/MacRISC4PE/ht@,f2000000/AppleMacRiscHT/pci@3/IOPCI2PCIBridge/k2-sata -root@C/AppleK2SATRoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDriver/ST3160023AS Media/IOApplePartitionScheme/Untitled 3@3
BSD root: disk0s3, major 14, minor 2
jnl: replay_journal: from 3501056 to: 7775744 (joffset 0xa701000)
AppleSMU -- shutdown cause = 3
AppleSMU::PMU vers = 0x000d006b, SPU vers = 0x26, SDH vers = 0x01,
CSRHIDTransitionDriver::stop
^^ That is where it freezes. Fans start whirring very loudly.
Any help would be great.
Thanks in advance!

UPDATE: now verbose mode tells me this:
standard timesplicing quantum is 1000 us
vmpagebootstrap: 124531 free pages
migtable_maxdispl = 70
91 prelinked modules
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
using 1310 buffer headers and 1310 cluster IO buffer headers
AppleKauaiATA shasta-ata features enabled
DART enabled
USB caused awake event (EHCI)
FireWire (OHCI) Apple ID 52 built-in now active, GUID 001124ff feccbeba; max speed s400
CSRHIDTransitionDriver::probe: -v
CSRHIDTransitionDriver::start before command
Security auditing service present
BSM auditing present
disabled
rooting via boot-uuid from /chosen: 219A46D4-EC3D-3CAC-8CCF-FFFF41F7635A
Waiting on <dict ID="0"><key>IOProviderClass</key><stringID="1">IOResources</string><key>IOResou rceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/MacRISC4PE/ht@,f2000000/AppleMacRiscHT/pci@3/IOPCI2PCIBridge/k2-sata -root@C/AppleK2SATRoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDriver/ST3160023AS Media/IOApplePartitionScheme/Untitled 3@3
BSD root: disk0s3, major 14, minor 2
jnl: replay_journal: from 3501056 to: 7775744 (joffset 0xa701000)
AppleSMU -- shutdown cause = 2
AppleSMU::PMU vers = 0x000d006b, SPU vers = 0x26, SDH vers = 0x01,
Checking disk
Mounting local filesystems
Then it freezes and the fans start whirring.

Computer freezes after installing new updates

I installed new updates and went to restart the computer, the apple logo came on and the progress bar went a third across then locked up with the curser spinning. Each time I try to restart the same thing happens. I can only restart in safe mode, can anyone help me with this problem.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

IPod freezes after connecting to PC/iTunes

I think it's a common problem that iPods freeze after plugging in the USB cable. I don't know if it's working for others, but if i do a reset (hold menu plus select) on the iPod while it is plugged and iTunes is running it works. But i have to do this every time i plug it in... So much to years of software development...

"All of my songs that were numbered or had numbers in the title are not at the bottom of the songs list instead of being the first songs listed."
I assume you meant to say "now" at the bottom of the list?
Unfortunately, like it or not this how the latest version of iTunes sorts songs. Numbers now appear at the end of the listings.

Just tried to connect my I-Pad to my new Mac and the iPad starts flashing trust this computer and the computer freezes after saying can't connect to this I-phone

Just tried to connect my I-Pad to my new I-mac and the I-Pad starts flashing with trust this computer, but it is too fast to catch and on the computer it says cannot connect to this I-phone....Computer then freezes and i have to do a force close...

What version of iTunes is on the computer?
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

Computer freezes after connecting zen mi

Similar Messages

Maybe you are looking for