Computer freezes after pacman -Syu

Did a pacman -Syu and then rebooted after some programs did not work. When rebooting I get
************FILESYSTEM CHECK FAILED****************
* Please repair manually and reboot. Note that the root        *
* file system is currently mounted read-only. To remount      *
* it read-write: mount -n -o remount,rw /                            *
* When you exit the maintenance shell the will                     *
* reboot automatically.                                                      *
checked drives with fsck and get
/dev/sda3 : Attempt to read block from filesystem resulted in short read while reading block 1545
/dev/sda3 : Attempt to read block from filesystem resulted in short read reading journal superblock
/dev/sda3 : Attempt to read block from filesystem resulted in short read while checking ext3 journal for /dev/sda3
sda is my second drive for backups and documents/music/photos
sdb is the root/boot/swap drive
I commented out /dev/sda3 in fstab and arch booted up but got to the last line which is starting kde??(don't know for sure cause it scrolls by so fast) and then I get a black screen with a steady cursor. I cannot ctl+alt+ anything to get to a tty or out of that screen. So I cannot check any logs or files and I don't know what to do now when the only thing I have been able to do is restart the computer and the same thing happens all over.
I guess I need to get a bootable cd (live cd) to get arch up and try to get a terminal to find problems. But reading the instructions for live cd it appears that I have to be in arch first. I am borrowing a windows computer to get on the internet and research.  How can I burn a live arch cd in a windows system?
Or is there something else to try??

I'll bet that skottish will kindly ask you to not cross post and direct people to your other post: http://bbs.archlinux.org/viewtopic.php?id=65113

Similar Messages

  • [SOLVED] cannot find root device after pacman -Syu

    Today I had a problem after pacman -Syu. Of course, my problem stemmed from not paying attention to the following (from https://bbs.archlinux.org/viewtopic.php?id=57205):
    <b>Read pacman's output while upgrading.</b>
    I could no longer boot. I received a message "cannot find root device" or something similar indicating a device with the appropriate UUID had not been found and I was being dropped into a recovery shell, then, when I typed exit, an emergency shell, followed shortly by a freeze.
    After some investigation it appeared my initramfs was broken/non-existent/something after the install. I booted into a live CD and found that updating pacman again, and mkinitcpio -p linux both displayed the following error: "Failed to create temporary working directory in /tmp". Long story short: mktemp was segfaulting. This should be extremely easy to check if you're having a similar problem. I replaced it with the version on the live CD and ran the pacman update again. Success. If you do this, you may need to make sure your live cd architecture and installed kernel architecture are the same.
    I'm not sure of the etiquette here, so I'm posting this in case someone else has the same problem I did; and benefits from a similar solution. I have checked the etiquette post and I don't think it's clear whether it's kosher to post things that don't actually require a solution. However, if I have misinterpreted the rules/etiquette and/or this type of post is considered extraneous please remove it.

    You have to use lvm first.  As all those vg*, lv*, and pv* commands are actually links to the lvm command, you should have to do something like "lvm vgscan" instead of just "vgscan".
    Edit: oh and at that point in the boot process, you are actually in the initramfs still (ash to be specific).
    Edit2: I was having issues with a USB keyboard and a new machine (actually just a new bios), and found out that because of windows 8's requriement for a fast POST, the default is to turn off the scanning for usb devices.  Though this was for UEFI, and I am not sure if the same would apply for a bios booting machine...
    Last edited by WonderWoofy (2013-03-26 23:10:40)

  • After pacman -Syu my system won't boot (It is not grub problem!)

    My English is not very strong, so you can look at this photo:
    http://img262.imageshack.us/my.php?imag … 102os3.jpg
    After pacman -Syu I rebooted computer and my system crash.
    No hardware changes, notning else change, only I have done system upgrade.
    A little bit more information /etc/fstab:
    /dev/sda1 /boot blablabla
    /dev/sda2 /   blablabla
    /dev/vg-home/home /home blablabla
    Kernel is booting normal (located at /dev/sda1 ; HDD is OK??), but when system starting "software" and checking the file system / (/dev/sda2), you see in photo result.
    Any ideas?
    Last edited by SKazas (2008-12-05 07:48:39)

    I can boot computer from instaliation CD and mount partitions, it is not problem.
    I have forgot about  emergency booting. But this problem is temporary, there is real problem:
    - nvidia-71xx is no longer supported and has been removed from the repositories. Affected users should install xf86-video-nv or xf86-video-vesa, complaints can be sent to nvidia for not providing compatible drivers.
    nv driver doesn`t support direct rendering (and 3D), don`t?  And I can`t use more archlinux AND  other distros after updating to new Xorg?
    My video card is Geforce FX5700 (not very bad and old card).

  • HT3964 My computer freezes after running for about 15 min even after setting the energy saving to 3 hours

    My Mac computer freezes after running for 15 min even after seeting the energy saving to 3 hours. Any ideas how to stop the freezing/

    Hi Teodorafrombc,
    Thanks for visiting Apple Support Communities.
    If your computer is becoming unresponsive, you may want to see if specific applications are causing this behavior. Try using the Force Quit menu to check for unresponsive applications:
    Using the Force Quit feature of OS X makes an application close, even when it is not responsive.
    Important: Normally you should not need to force quit an app to close it. When an app is forced to quit, any unsaved changes to open documents are not saved, so try these methods to normally close the app first:
    Choose Quit from the app menu. For example, in Safari, choose Safari > Quit Safari.
    Choose Quit by right-clicking or control-clicking on an app's icon in the Dock
    You can find the article with these steps here:
    OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    If your display is going blank or seems to be going to sleep unexpectedly, try these steps first:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    You can find the article with these steps and more information here:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    If these steps don't resolve the issue, feel free to reply with more information about the symptoms you are experiencing.
    Best,
    Jeremy

  • Nm-applet,power-manager ....disappeared from panel after "pacman -Syu

    i use gnome-shell ............nm-applet,power-manager ....disappeared from panel after "pacman -Syu............in pacman -Syu.... dbus was updated..............now when i type nm-applet in the panel i get :
    nm-applet
    ** Message: applet now removed from the notification area
    earlier before upgrade it was working perfectly ......please help

    i use gnome-shell ............nm-applet,power-manager ....disappeared from panel after "pacman -Syu............in pacman -Syu.... dbus was updated..............now when i type nm-applet in the panel i get :
    nm-applet
    ** Message: applet now removed from the notification area
    earlier before upgrade it was working perfectly ......please help

  • Computer freezes after going into sleep mode

    My computer freezes after being left idle and I am prompted to restart. I have the screen saver set to view the nature pictures, but that doesn't show. The screen goes blank and then I have to restart. I've read about sleep problems, but not a solution. Have any? Thanks! ~M
    Dual 867 G4   Mac OS X (10.4.3)  

    Hello Dean,
    Yes, the restart prompt looks like the kernel panic alert screen. And I did accesss the panic.log and it doesn't mean much to me! Here is what I copied from the two crashes today:
    Mon Dec 12 11:19:08 2005
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000008 PC=0x000000000012C76C
    Latest crash info for cpu 0:
    Exception state (sv=0x2D53AA00)
    PC=0x0012C76C; MSR=0x00009030; DAR=0x00000008; DSISR=0x40000000; LR=0x0012C7A4; R1=0x177439D0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0012C7A4 0x0012E020 0x0012F4A4 0x0012D310 0x0012F014 0x0028FDA8
    0x00281698 0x0027D238 0x0027CF74 0x002A9BF4 0x000ABE30 0x00000000
    Proceeding back via exception chain:
    Exception state (sv=0x2D53AA00)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x3C5FC780)
    PC=0x9001452C; MSR=0x0000F030; DAR=0xE07FF000; DSISR=0x42000000; LR=0x0000CFAC; R1=0xF0080040; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095698 0x00095BB0 0x0002683C 0x000A8304 0x000ABC80
    Proceeding back via exception chain:
    Exception state (sv=0x2D53AA00)
    PC=0x0012C76C; MSR=0x00009030; DAR=0x00000008; DSISR=0x40000000; LR=0x0012C7A4; R1=0x177439D0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0012C7A4 0x0012E020 0x0012F4A4 0x0012D310 0x0012F014 0x0028FDA8
    0x00281698 0x0027D238 0x0027CF74 0x002A9BF4 0x000ABE30 0x00000000
    Exception state (sv=0x3C5FC780)
    PC=0x9001452C; MSR=0x0000F030; DAR=0xE07FF000; DSISR=0x42000000; LR=0x0000CFAC; R1=0xF0080040; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
    Mon Dec 12 12:44:48 2005
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000008 PC=0x000000000012C76C
    Latest crash info for cpu 0:
    Exception state (sv=0x2D53AA00)
    PC=0x0012C76C; MSR=0x00009030; DAR=0x00000008; DSISR=0x40000000; LR=0x0012C7A4; R1=0x177439D0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0012C7A4 0x0012E020 0x0012F4A4 0x0012D310 0x0012F014 0x0028FDA8
    0x00281698 0x0027D238 0x0027CF74 0x002A9BF4 0x000ABE30 0x00000000
    Proceeding back via exception chain:
    Exception state (sv=0x2D53AA00)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x3C5FC780)
    PC=0x9001452C; MSR=0x0000F030; DAR=0xE07FF000; DSISR=0x42000000; LR=0x0000CFAC; R1=0xF0080040; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095698 0x00095BB0 0x0002683C 0x000A8304 0x000ABC80
    Proceeding back via exception chain:
    Exception state (sv=0x2D53AA00)
    PC=0x0012C76C; MSR=0x00009030; DAR=0x00000008; DSISR=0x40000000; LR=0x0012C7A4; R1=0x177439D0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0012C7A4 0x0012E020 0x0012F4A4 0x0012D310 0x0012F014 0x0028FDA8
    0x00281698 0x0027D238 0x0027CF74 0x002A9BF4 0x000ABE30 0x00000000
    Exception state (sv=0x3C5FC780)
    PC=0x9001452C; MSR=0x0000F030; DAR=0xE07FF000; DSISR=0x42000000; LR=0x0000CFAC; R1=0xF0080040; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
    I'll check into Dr. Smoke's FAQ, and see if I can decipher any of it.
    Let me know what the above text means to you.
    Thanks again~
    Michelle
    Dual 867 G4   Mac OS X (10.4.3)  

  • [SOLVED] Black screen after kernel boot after pacman -Syu

    Hi, after full system upgrade with pacman -Syu, I get after the kernel boot black screen and everything is freezing. Then need to manually shut down the power button!
    Normally when my system starts up after the kernel boot I get straight to the command line terminal login.
    Can anybody help me how to fix this? Any clues? Any advice is welcome!
    The problem is solved by downgrading to kernel 3.6.11.-1
    Many thanks for the help from the people on #archlinux !
    Last edited by OpenEye (2013-01-29 05:14:04)

    jasonwryan wrote:
    Please stop bumping your thread: use the edit button
    https://wiki.archlinux.org/index.php/Fo … te#Bumping
    What have you done about the errors being printed to your logs? You could start by fixing the network error and the broken udev rule...
    Are you still using intiscripts? They are no longer supported: https://www.archlinux.org/news/end-of-i … s-support/
    # edit: not a pacman issue, moving to Newbie Corner
    I have searched for many hours and days for solutions on the internet and forums, tried some things, but with no results! I don't know how to fix the errors! Do you know how to fix that? I'm a total n00b! I'm doing my best as I can! Need help, thanks!

  • KDE never finish to start after pacman -Syu [SOLVED]

    Hi to All.
    I have upgraded my system with pacman -Syu (I have to upgrade first broadcom-wl).
    after upgrading to new kernel, I reinstalled pacman and nvidia and nvidia-utils
    started kde and it begins to start session, but 4 processs get full cpu and never ends the session init
    the processes are kbuildsyscoca (2 processes), kded4 and kconf_update
    If I start twm instead of kde it works
    I readed the forums and althoug not seen something similar, decide to downgrade kernel, and recompile (reinstall broadcom-wl, and nvidia drivers)
    then tested again and the same results.
    last test was to move my .kde and .kde4 folders to a backup and start kde again (starting from startx and not kdm)
    this time it launched a lot (more than 100 kconf_update trying to update some stuff of kopete)
    then deinstalled kopete and all kde-meta packages that are not needed now, but still have the same problem,
    the 4 processes keep running and the desktop never comes up. (black screen with cursor I can move)
    anyone with similar sympthoms?
    any thing I can try?
    as a summary x seems to work fine (twm starts)
    wireless works fine
    nvidia works fine
    only kde get stuck ant the init
    any help appreciated.
    Thanks
    Last edited by clmates (2009-11-03 18:32:51)

    Hi.
    I will post here by parts as the post is too long
    test with other user in my system and with root all fails with the same sympthoms
    I attach here the logs of the following test done with another user (charo)
    steps.
    /etc/rc.d/kdm stop
    rm /var/log/kdm.log
    rm /var/log/xorg.o.mslog
    rm /home/charo/.xsession-errors
    rm -r /home/charo/.kde
    rm -r /home/charo/.kde4
    rm -r /tmp/kde-charo
    rm -r /tmp/ksocket-charo
    rm -r /var/tmp/kdecache-charo
    so If I not forhet none, all stuff regarding kde for user charo is non existant
    then started kdm
    /etc/rc.d/kdm start
    then login with user charo in a standard kde4 session
    the splash screen comes up and only the 2 fisrt icons come up (between the first and the second almost 2 minutes passes), then the screen goes blue (default background), and a powerdevil error is shown, we can move the mouse,  and clicking in the error it dissapear, but eh screen keeps blue without any data (icons, applets, panels, etc), no element is shown
    here are the logs
    /var/log/Xorg.0.log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux aragorn 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 14:16:44 CEST 2009 x86_64
    Build Date: 04 September 2009 05:45:43PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 20:57:24 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Layout0"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Device0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "SynapticsTouchpad"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is disabled
    (II) Cannot locate a core pointer device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x1d40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI: (0:0:10:3) 10de:0271:103c:30b7 nVidia Corporation MCP51 PMU rev 163, Mem @ 0xc0040000/262144
    (--) PCI:*(0:5:0:0) 10de:01d6:103c:30b7 nVidia Corporation G72M [GeForce Go 7200] rev 161, Mem @ 0xc7000000/16777216, 0xd0000000/268435456, 0xc6000000/16777216
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 190.40 Thu Oct 15 16:12:47 PDT 2009
    (II) Loading extension GLX
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) LoadModule: "synaptics"
    (II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) NVIDIA dlloader X Driver 190.40 Thu Oct 15 15:08:33 PDT 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 05@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules//libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "HWcursor"
    (**) Oct 21 20:57:24 NVIDIA(0): Enabling RENDER acceleration
    (II) Oct 21 20:57:25 NVIDIA(0): NVIDIA GPU GeForce Go 7200 (G72) at PCI:5:0:0 (GPU-0)
    (--) Oct 21 20:57:25 NVIDIA(0): Memory: 262144 kBytes
    (--) Oct 21 20:57:25 NVIDIA(0): VideoBIOS: 05.72.22.41.c9
    (II) Oct 21 20:57:25 NVIDIA(0): Detected PCI Express Link width: 16X
    (--) Oct 21 20:57:25 NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) Oct 21 20:57:25 NVIDIA(0): Connected display device(s) on GeForce Go 7200 at PCI:5:0:0:
    (--) Oct 21 20:57:25 NVIDIA(0): LPL (DFP-0)
    (--) Oct 21 20:57:25 NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
    (--) Oct 21 20:57:25 NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
    (II) Oct 21 20:57:25 NVIDIA(0): Assigned Display Device: DFP-0
    (WW) Oct 21 20:57:25 NVIDIA(0): No valid modes for "1280x768"; removing.
    (WW) Oct 21 20:57:25 NVIDIA(0): No valid modes for "1280x720"; removing.
    (WW) Oct 21 20:57:25 NVIDIA(0): No valid modes for "1280x600"; removing.
    (WW) Oct 21 20:57:25 NVIDIA(0): No valid modes for "1024x600"; removing.
    (WW) Oct 21 20:57:25 NVIDIA(0): No valid modes for "768x576"; removing.
    (II) Oct 21 20:57:25 NVIDIA(0): Validated modes:
    (II) Oct 21 20:57:25 NVIDIA(0): "1280x800"
    (II) Oct 21 20:57:25 NVIDIA(0): "1024x768"
    (II) Oct 21 20:57:25 NVIDIA(0): "800x600"
    (II) Oct 21 20:57:25 NVIDIA(0): Virtual screen size determined to be 1280 x 800
    (--) Oct 21 20:57:25 NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
    (--) Oct 21 20:57:25 NVIDIA(0): option
    (==) Oct 21 20:57:25 NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) Oct 21 20:57:25 NVIDIA(0): Initialized GPU GART.
    (II) Oct 21 20:57:25 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) Oct 21 20:57:25 NVIDIA(0): enough to receive ACPI display change hotkey events.
    (II) Oct 21 20:57:25 NVIDIA(0): Setting mode "1280x800"
    (II) Loading extension NV-GLX
    (II) Oct 21 20:57:25 NVIDIA(0): Initialized OpenGL Acceleration
    (==) NVIDIA(0): Disabling shared memory pixmaps
    (II) Oct 21 20:57:25 NVIDIA(0): Initialized X Rendering Acceleration
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (**) Option "dpms"
    (**) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (II) Loading extension XINERAMA
    (WW) NVIDIA(0): Option "CalcAlgorithm" is not used
    (WW) NVIDIA(0): Option "PreferredMode" is not used
    (==) RandR enabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing extension GLX
    (II) Synaptics touchpad driver version 1.1.3
    (--) SynapticsTouchpad auto-dev sets device to /dev/input/event8
    (**) Option "Device" "/dev/input/event8"
    (II) SynapticsTouchpad: x-axis range 1472 - 5472
    (II) SynapticsTouchpad: y-axis range 1408 - 4448
    (II) SynapticsTouchpad: pressure range 0 - 255
    (II) SynapticsTouchpad: finger width range 0 - 0
    (II) SynapticsTouchpad: buttons: left right middle double triple
    (**) Option "SHMConfig" "true"
    (**) Option "LeftEdge" "1700"
    (**) Option "RightEdge" "5300"
    (**) Option "TopEdge" "1700"
    (**) Option "BottomEdge" "4200"
    (**) Option "FingerLow" "25"
    (**) Option "FingerHigh" "30"
    (**) Option "MaxTapTime" "180"
    (**) Option "VertScrollDelta" "100"
    (**) Option "HorizScrollDelta" "100"
    (**) Option "VertEdgeScroll" "true"
    (**) Option "HorizEdgeScroll" "true"
    (**) Option "CornerCoasting" "true"
    (**) Option "VertTwoFingerScroll" "true"
    (**) Option "HorizTwoFingerScroll" "true"
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (**) Option "MinSpeed" "0.40"
    (**) Option "MaxSpeed" "0.80"
    (**) Option "AccelFactor" "0.0020"
    (**) Option "CoastingSpeed" "0.30"
    (--) SynapticsTouchpad: touchpad found
    (**) Option "AlwaysCore" "true"
    (**) Option "SendCoreEvents"
    (**) SynapticsTouchpad: always reports core events
    (II) XINPUT: Adding extended input device "SynapticsTouchpad" (type: TOUCHPAD)
    (**) SynapticsTouchpad: (accel) keeping acceleration scheme 1
    (**) SynapticsTouchpad: (accel) filter chain progression: 2.00
    (**) SynapticsTouchpad: (accel) filter stage 0: 20.00 ms
    (**) SynapticsTouchpad: (accel) set acceleration profile 0
    (--) SynapticsTouchpad: touchpad found
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "es"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event8"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device USB 2.0 Camera
    (**) USB 2.0 Camera: always reports core events
    (**) USB 2.0 Camera: Device: "/dev/input/event7"
    (II) USB 2.0 Camera: Found keys
    (II) USB 2.0 Camera: Configuring as keyboard
    (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "es"
    (II) config/hal: Adding input device Sleep Button
    (**) Sleep Button: always reports core events
    (**) Sleep Button: Device: "/dev/input/event5"
    (II) Sleep Button: Found keys
    (II) Sleep Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "es"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event4"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "es"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event9"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "es"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "es"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Oct 21 20:59:19 NVIDIA(0): Setting mode "1280x800"
    (II) Oct 21 20:59:19 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) Oct 21 20:59:19 NVIDIA(0): enough to receive ACPI display change hotkey events.
    (--) SynapticsTouchpad: touchpad found
    (WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) USB 2.0 Camera: Device reopened after 1 attempts.
    (II) Sleep Button: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Oct 21 20:59:36 NVIDIA(0): Setting mode "1280x800"
    (II) Oct 21 20:59:36 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) Oct 21 20:59:36 NVIDIA(0): enough to receive ACPI display change hotkey events.
    (--) SynapticsTouchpad: touchpad found
    (WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) USB 2.0 Camera: Device reopened after 1 attempts.
    (II) Sleep Button: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Oct 21 21:00:27 NVIDIA(0): Setting mode "1280x800"
    (II) Oct 21 21:00:27 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) Oct 21 21:00:27 NVIDIA(0): enough to receive ACPI display change hotkey events.
    (--) SynapticsTouchpad: touchpad found
    (WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) USB 2.0 Camera: Device reopened after 1 attempts.
    (II) Sleep Button: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Oct 21 21:01:50 NVIDIA(0): Setting mode "1280x800"
    (II) Oct 21 21:01:50 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) Oct 21 21:01:50 NVIDIA(0): enough to receive ACPI display change hotkey events.
    (--) SynapticsTouchpad: touchpad found
    (WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) USB 2.0 Camera: Device reopened after 1 attempts.
    (II) Sleep Button: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Oct 21 21:02:32 NVIDIA(0): Setting mode "1280x800"
    (II) Oct 21 21:02:32 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) Oct 21 21:02:32 NVIDIA(0): enough to receive ACPI display change hotkey events.
    (--) SynapticsTouchpad: touchpad found
    (WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) USB 2.0 Camera: Device reopened after 1 attempts.
    (II) Sleep Button: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Oct 21 21:03:17 NVIDIA(0): Setting mode "1280x800"
    (II) Oct 21 21:03:17 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) Oct 21 21:03:17 NVIDIA(0): enough to receive ACPI display change hotkey events.
    (--) SynapticsTouchpad: touchpad found
    (WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) USB 2.0 Camera: Device reopened after 1 attempts.
    (II) Sleep Button: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Oct 21 21:04:25 NVIDIA(0): Setting mode "1280x800"
    (II) Oct 21 21:04:25 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) Oct 21 21:04:25 NVIDIA(0): enough to receive ACPI display change hotkey events.
    (--) SynapticsTouchpad: touchpad found
    (WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) USB 2.0 Camera: Device reopened after 1 attempts.
    (II) Sleep Button: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Oct 21 21:15:04 NVIDIA(0): Setting mode "1280x800"
    (II) Oct 21 21:15:04 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) Oct 21 21:15:04 NVIDIA(0): enough to receive ACPI display change hotkey events.
    (--) SynapticsTouchpad: touchpad found
    (WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) USB 2.0 Camera: Device reopened after 1 attempts.
    (II) Sleep Button: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Oct 21 21:17:09 NVIDIA(0): Setting mode "1280x800"
    (II) Oct 21 21:17:10 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) Oct 21 21:17:10 NVIDIA(0): enough to receive ACPI display change hotkey events.
    (--) SynapticsTouchpad: touchpad found
    (WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) USB 2.0 Camera: Device reopened after 1 attempts.
    (II) Sleep Button: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Power Button: Close
    (II) UnloadModule: "evdev"
    (II) Video Bus: Close
    (II) UnloadModule: "evdev"
    (II) Power Button: Close
    (II) UnloadModule: "evdev"
    (II) Sleep Button: Close
    (II) UnloadModule: "evdev"
    (II) USB 2.0 Camera: Close
    (II) UnloadModule: "evdev"
    (II) UnloadModule: "synaptics"
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) UnloadModule: "synaptics"
    look at times, I started at 20:57, then the server gets to a "final" status at 20:59 t

  • Tablet not working after pacman -Syu

    Hi,
    I recently did a pacman -Syu, and then after restarting my computer, X would not start, telling me that the driver for my tablet couldn't open the device. doing 'cat /proc/bus/input/devices' comes up with the following entry:
    I: Bus=0003 Vendor=5543 Product=0005 Version=0100
    N: Name="UC-LOGIC Tablet WP8060U"
    P: Phys=usb-0000:00:0f.0-3/input0
    S: Sysfs=/devices/pci0000:00/0000:00:0f.0/usb2/2-3/2-3:1.0/input/input1
    U: Uniq=
    H: Handlers=mouse1 event1 ts1
    B: EV=f
    B: KEY=c01 0 3f0001 0 0 0 0 0 0 0 0
    B: REL=303
    B: ABS=100000f
    which is more or less the same as it was before the update. however /dev/input/event1 no longer exists, and trying to point the driver to the other two handlers comes up with the same error.
    since the number after event changes from boot to boot, I had been using the following udev rule to make a symlink called /dev/tablet:
    BUS=="usb", SYSFS{serial}=="0000:00:0f.0", KERNEL=="event*", NAME="%k", SYMLINK="tablet"
    The tablet is a Genius MousePen 8x6, I'm using the wizardpen driver, which is in the aur (I am actually the maintainer.)
    I'm not terribly knowledgeable about udev, which to me it sounds like is at the root of the problem, so I'm at a bit of a loss.
    any help would be appreciated.

    I removed the 'NAME="%k"' from my udev rule and the device is now showing up, but I'm still getting the same error when I try to start X. I've considered the possibility that the driver simply isn't compatible with the latest version of xorg, but downgrading just the xorg-server package results in an xserver which won't start on account of not being able to use any of the drivers, so I'm having trouble verifying this. how do I go about figuring out exactly which other packages need to be downgraded to make the previous version of xorg-server work?

  • After pacman -Syu upgrade xfce boots black screen cursor

    Hello,
    I've recently upgraded the system with pacman -Syu and it seem something has gone wrong with new xfce 4.12. I have changed DM from slim to lxdm and can only boot to openbox but not xfce. I also switch to tty2 and try a startx with ~/.xinitrc file with exec startxfce4 but it does not launch properly. What I mean is both the display manager and a startx boots me into a black screen with a cursor when i try to launch xfce. Again I can boot to openbox just fine. I've searched for similar topics but cant seem to find any solution. Can anyone help?
    [ 18.673]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 18.673] X Protocol Version 11, Revision 0
    [ 18.673] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 18.673] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
    [ 18.674] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
    [ 18.674] Build Date: 14 March 2015 06:45:50PM
    [ 18.674]
    [ 18.674] Current version of pixman: 0.32.6
    [ 18.674] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 18.674] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 18.674] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 17 03:38:39 2015
    [ 18.937] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 19.047] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 19.553] (==) No Layout section. Using the first Screen section.
    [ 19.553] (**) |-->Screen "Default Screen" (0)
    [ 19.553] (**) | |-->Monitor "<default monitor>"
    [ 19.586] (==) No monitor specified for screen "Default Screen".
    Using a default monitor configuration.
    [ 19.586] (==) Automatically adding devices
    [ 19.586] (==) Automatically enabling devices
    [ 19.586] (==) Automatically adding GPU devices
    [ 20.294] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 20.294] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 20.294] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 20.354] (II) Loader magic: 0x815d80
    [ 20.354] (II) Module ABI versions:
    [ 20.354] X.Org ANSI C Emulation: 0.4
    [ 20.354] X.Org Video Driver: 19.0
    [ 20.354] X.Org XInput driver : 21.0
    [ 20.354] X.Org Server Extension : 9.0
    [ 20.356] (EE) systemd-logind: failed to get session: PID 940 does not belong to any known session
    [ 20.357] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 20.359] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
    [ 20.359] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 20.422] (II) "glx" will be loaded by default.
    [ 20.423] (II) LoadModule: "vnc"
    [ 20.568] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
    [ 22.029] (II) Module vnc: vendor="Constantin Kaplinsky"
    [ 22.029] compiled for 1.17.1, module version = 1.0.0
    [ 22.029] Module class: X.Org Server Extension
    [ 22.029] ABI class: X.Org Server Extension, version 9.0
    [ 22.029] (II) LoadModule: "glx"
    [ 22.030] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 24.054] (II) Module glx: vendor="X.Org Foundation"
    [ 24.208] compiled for 1.17.1, module version = 1.0.0
    [ 24.208] ABI class: X.Org Server Extension, version 9.0
    [ 24.208] (==) AIGLX enabled
    [ 24.208] (==) Matched ati as autoconfigured driver 0
    [ 24.208] (==) Matched ati as autoconfigured driver 1
    [ 24.208] (==) Matched modesetting as autoconfigured driver 2
    [ 24.208] (==) Matched fbdev as autoconfigured driver 3
    [ 24.208] (==) Matched vesa as autoconfigured driver 4
    [ 24.208] (==) Assigned the driver to the xf86ConfigLayout
    [ 24.208] (II) LoadModule: "ati"
    [ 24.261] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 24.332] (II) Module ati: vendor="X.Org Foundation"
    [ 24.332] compiled for 1.17.0, module version = 7.5.0
    [ 24.332] Module class: X.Org Video Driver
    [ 24.332] ABI class: X.Org Video Driver, version 19.0
    [ 24.332] (II) LoadModule: "radeon"
    [ 24.333] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 24.765] (II) Module radeon: vendor="X.Org Foundation"
    [ 24.765] compiled for 1.17.0, module version = 7.5.0
    [ 24.765] Module class: X.Org Video Driver
    [ 24.765] ABI class: X.Org Video Driver, version 19.0
    [ 24.765] (II) LoadModule: "modesetting"
    [ 24.765] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 24.878] (II) Module modesetting: vendor="X.Org Foundation"
    [ 24.878] compiled for 1.17.1, module version = 1.17.1
    [ 24.878] Module class: X.Org Video Driver
    [ 24.878] ABI class: X.Org Video Driver, version 19.0
    [ 24.878] (II) LoadModule: "fbdev"
    [ 24.878] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 25.005] (II) Module fbdev: vendor="X.Org Foundation"
    [ 25.005] compiled for 1.17.0, module version = 0.4.4
    [ 25.005] Module class: X.Org Video Driver
    [ 25.005] ABI class: X.Org Video Driver, version 19.0
    [ 25.005] (II) LoadModule: "vesa"
    [ 25.006] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 25.099] (II) Module vesa: vendor="X.Org Foundation"
    [ 25.099] compiled for 1.17.0, module version = 2.3.2
    [ 25.099] Module class: X.Org Video Driver
    [ 25.099] ABI class: X.Org Video Driver, version 19.0
    [ 25.099] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
    BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
    HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
    [ 25.111] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 25.111] (II) FBDEV: driver for framebuffer: fbdev
    [ 25.111] (II) VESA: driver for VESA chipsets: vesa
    [ 25.111] (++) using VT number 7
    [ 25.184] (II) [KMS] Kernel modesetting enabled.
    [ 25.184] (WW) Falling back to old probe method for modesetting
    [ 25.184] (WW) Falling back to old probe method for fbdev
    [ 25.184] (II) Loading sub module "fbdevhw"
    [ 25.184] (II) LoadModule: "fbdevhw"
    [ 25.184] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 25.280] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 25.280] compiled for 1.17.1, module version = 0.0.2
    [ 25.280] ABI class: X.Org Video Driver, version 19.0
    [ 25.280] (WW) Falling back to old probe method for vesa
    [ 25.280] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
    [ 25.280] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 25.280] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 25.280] (==) RADEON(0): Default visual is TrueColor
    [ 25.280] (==) RADEON(0): RGB weight 888
    [ 25.280] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 25.280] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
    [ 25.280] (II) Loading sub module "dri2"
    [ 25.280] (II) LoadModule: "dri2"
    [ 25.280] (II) Module "dri2" already built-in
    [ 25.280] (II) Loading sub module "exa"
    [ 25.280] (II) LoadModule: "exa"
    [ 25.281] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 25.406] (II) Module exa: vendor="X.Org Foundation"
    [ 25.406] compiled for 1.17.1, module version = 2.6.0
    [ 25.406] ABI class: X.Org Video Driver, version 19.0
    [ 25.406] (II) RADEON(0): KMS Color Tiling: enabled
    [ 25.406] (II) RADEON(0): KMS Color Tiling 2D: enabled
    [ 25.406] (II) RADEON(0): KMS Pageflipping: enabled
    [ 25.406] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 25.440] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 25.471] (II) RADEON(0): Output HDMI-0 has no monitor section
    [ 25.510] (II) RADEON(0): EDID for output VGA-0
    [ 25.541] (II) RADEON(0): EDID for output HDMI-0
    [ 25.541] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
    [ 25.541] (II) RADEON(0): Year: 2012 Week: 0
    [ 25.541] (II) RADEON(0): EDID Version: 1.3
    [ 25.541] (II) RADEON(0): Digital Display Input
    [ 25.541] (II) RADEON(0): DFP 1.x compatible TMDS
    [ 25.541] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
    [ 25.541] (II) RADEON(0): Gamma: 2.20
    [ 25.541] (II) RADEON(0): DPMS capabilities: Off
    [ 25.541] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 25.541] (II) RADEON(0): First detailed timing is preferred mode
    [ 25.541] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
    [ 25.541] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
    [ 25.541] (II) RADEON(0): Supported established timings:
    [ 25.541] (II) RADEON(0): 720x400@70Hz
    [ 25.541] (II) RADEON(0): 640x480@60Hz
    [ 25.541] (II) RADEON(0): 640x480@67Hz
    [ 25.541] (II) RADEON(0): 640x480@72Hz
    [ 25.541] (II) RADEON(0): 640x480@75Hz
    [ 25.541] (II) RADEON(0): 800x600@56Hz
    [ 25.541] (II) RADEON(0): 800x600@60Hz
    [ 25.541] (II) RADEON(0): 800x600@72Hz
    [ 25.541] (II) RADEON(0): 800x600@75Hz
    [ 25.541] (II) RADEON(0): 832x624@75Hz
    [ 25.542] (II) RADEON(0): 1024x768@60Hz
    [ 25.542] (II) RADEON(0): 1024x768@70Hz
    [ 25.542] (II) RADEON(0): 1024x768@75Hz
    [ 25.542] (II) RADEON(0): 1280x1024@75Hz
    [ 25.542] (II) RADEON(0): 1152x864@75Hz
    [ 25.542] (II) RADEON(0): Manufacturer's mask: 0
    [ 25.542] (II) RADEON(0): Supported standard timings:
    [ 25.542] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 25.542] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 25.542] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 25.542] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 25.542] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 25.542] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 25.542] (II) RADEON(0): Supported detailed timing:
    [ 25.542] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
    [ 25.542] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
    [ 25.542] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
    [ 25.542] (II) RADEON(0): Supported detailed timing:
    [ 25.542] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
    [ 25.542] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
    [ 25.542] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
    [ 25.542] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
    [ 25.542] (II) RADEON(0): Monitor name: NS-20EM50A13
    [ 25.542] (II) RADEON(0): EDID (in hex):
    [ 25.542] (II) RADEON(0): 00ffffffffffff00085920bb01010101
    [ 25.542] (II) RADEON(0): 00160103812c19782a3c25a554559f27
    [ 25.542] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
    [ 25.542] (II) RADEON(0): 81c0010101012f2640a060841a303020
    [ 25.542] (II) RADEON(0): 3500baf91000001a662150b051001b30
    [ 25.542] (II) RADEON(0): 40703600baf91000001e000000fd0037
    [ 25.542] (II) RADEON(0): 4c1e520f000a202020202020000000fc
    [ 25.542] (II) RADEON(0): 004e532d3230454d35304131330a00a6
    [ 25.542] (II) RADEON(0): Printing probed modes for output HDMI-0
    [ 25.542] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
    [ 25.542] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 25.542] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 25.542] (II) RADEON(0): Output VGA-0 disconnected
    [ 25.542] (II) RADEON(0): Output HDMI-0 connected
    [ 25.542] (II) RADEON(0): Using exact sizes for initial modes
    [ 25.542] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
    [ 25.542] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 25.542] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
    [ 25.542] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 25.542] (==) RADEON(0): DPI set to (96, 96)
    [ 25.542] (II) Loading sub module "fb"
    [ 25.542] (II) LoadModule: "fb"
    [ 25.542] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 25.769] (II) Module fb: vendor="X.Org Foundation"
    [ 25.769] compiled for 1.17.1, module version = 1.0.0
    [ 25.769] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 25.769] (II) Loading sub module "ramdac"
    [ 25.769] (II) LoadModule: "ramdac"
    [ 25.769] (II) Module "ramdac" already built-in
    [ 25.769] (II) UnloadModule: "modesetting"
    [ 25.769] (II) Unloading modesetting
    [ 25.769] (II) UnloadModule: "fbdev"
    [ 25.769] (II) Unloading fbdev
    [ 25.769] (II) UnloadSubModule: "fbdevhw"
    [ 25.769] (II) Unloading fbdevhw
    [ 25.769] (II) UnloadModule: "vesa"
    [ 25.769] (II) Unloading vesa
    [ 25.769] (--) Depth 24 pixmap format is 32 bpp
    [ 25.818] (II) RADEON(0): [DRI2] Setup complete
    [ 25.818] (II) RADEON(0): [DRI2] DRI driver: r600
    [ 25.818] (II) RADEON(0): [DRI2] VDPAU driver: r600
    [ 25.818] (II) RADEON(0): Front buffer size: 5652K
    [ 25.818] (II) RADEON(0): VRAM usage limit set to 225496K
    [ 25.853] (==) RADEON(0): Backing store enabled
    [ 25.853] (II) RADEON(0): Direct rendering enabled
    [ 25.853] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 25.853] (II) EXA(0): Driver registered support for the following operations:
    [ 25.853] (II) Solid
    [ 25.853] (II) Copy
    [ 25.853] (II) Composite (RENDER acceleration)
    [ 25.853] (II) UploadToScreen
    [ 25.853] (II) DownloadFromScreen
    [ 25.853] (II) RADEON(0): Acceleration enabled
    [ 25.853] (==) RADEON(0): DPMS enabled
    [ 25.853] (==) RADEON(0): Silken mouse enabled
    [ 25.920] (II) RADEON(0): Set up textured video
    [ 25.920] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [ 25.920] (II) RADEON(0): [XvMC] Extension initialized.
    [ 25.920] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 26.100] (WW) RADEON(0): Option "PasswordFile" is not used
    [ 26.100] (--) RandR disabled
    [ 32.355] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 32.355] (II) AIGLX: enabled GLX_ARB_create_context
    [ 32.355] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 32.355] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 32.355] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 32.355] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 32.355] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 32.355] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 32.355] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 32.357] (II) AIGLX: Loaded and initialized r600
    [ 32.357] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 32.358] (II) RADEON(0): Setting screen physical size to 423 x 238
    [ 35.161] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 35.161] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 35.161] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 35.161] (II) LoadModule: "evdev"
    [ 35.206] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 35.498] (II) Module evdev: vendor="X.Org Foundation"
    [ 35.498] compiled for 1.16.2, module version = 2.9.1
    [ 35.499] Module class: X.Org XInput Driver
    [ 35.499] ABI class: X.Org XInput driver, version 21.0
    [ 35.499] (II) Using input driver 'evdev' for 'Power Button'
    [ 35.499] (**) Power Button: always reports core events
    [ 35.499] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 35.499] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 35.499] (--) evdev: Power Button: Found keys
    [ 35.499] (II) evdev: Power Button: Configuring as keyboard
    [ 35.499] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
    [ 35.499] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 35.499] (**) Option "xkb_rules" "evdev"
    [ 35.499] (**) Option "xkb_model" "pc104"
    [ 35.499] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.975] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 35.975] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 35.975] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 35.975] (II) Using input driver 'evdev' for 'Power Button'
    [ 35.975] (**) Power Button: always reports core events
    [ 35.975] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 35.975] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 35.975] (--) evdev: Power Button: Found keys
    [ 35.975] (II) evdev: Power Button: Configuring as keyboard
    [ 35.975] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
    [ 35.975] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 35.975] (**) Option "xkb_rules" "evdev"
    [ 35.975] (**) Option "xkb_model" "pc104"
    [ 35.976] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.977] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
    [ 35.977] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
    [ 35.977] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
    [ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
    [ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
    [ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
    [ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
    [ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 35.978] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
    [ 35.978] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
    [ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
    [ 35.979] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
    [ 35.979] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
    [ 35.979] (II) No input driver specified, ignoring this device.
    [ 35.979] (II) This device may have been added with another device file.
    [ 35.980] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
    [ 35.980] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 35.980] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 35.980] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 35.980] (**) Generic USB Keyboard: always reports core events
    [ 35.980] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
    [ 35.980] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 35.980] (--) evdev: Generic USB Keyboard: Found keys
    [ 35.980] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 35.980] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:040B:2000.0004/input/input10/event7"
    [ 35.980] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
    [ 35.980] (**) Option "xkb_rules" "evdev"
    [ 35.980] (**) Option "xkb_model" "pc104"
    [ 35.980] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.981] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
    [ 35.981] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 35.981] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 35.981] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 35.981] (**) Generic USB Keyboard: always reports core events
    [ 35.981] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
    [ 35.981] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 35.981] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
    [ 35.981] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
    [ 35.981] (--) evdev: Generic USB Keyboard: Found relative axes
    [ 35.981] (--) evdev: Generic USB Keyboard: Found x and y relative axes
    [ 35.981] (--) evdev: Generic USB Keyboard: Found keys
    [ 35.981] (II) evdev: Generic USB Keyboard: Configuring as mouse
    [ 35.981] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 35.981] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
    [ 35.981] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
    [ 35.981] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 35.981] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:040B:2000.0005/input/input11/event8"
    [ 35.981] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
    [ 35.981] (**) Option "xkb_rules" "evdev"
    [ 35.981] (**) Option "xkb_model" "pc104"
    [ 35.981] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.981] (II) evdev: Generic USB Keyboard: initialized for relative axes.
    [ 35.981] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
    [ 35.982] (**) Generic USB Keyboard: (accel) acceleration profile 0
    [ 35.982] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
    [ 35.982] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
    [ 35.982] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
    [ 35.982] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 35.982] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 35.982] (**) Generic USB Keyboard: always reports core events
    [ 35.982] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
    [ 35.982] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
    [ 36.060] (EE) PreInit returned 2 for "Generic USB Keyboard"
    [ 36.060] (II) UnloadModule: "evdev"
    [ 36.060] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
    [ 36.060] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
    [ 36.060] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
    [ 36.060] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
    [ 36.060] (**) HP Webcam HD-2200: always reports core events
    [ 36.061] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
    [ 36.061] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
    [ 36.061] (--) evdev: HP Webcam HD-2200: Found keys
    [ 36.061] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
    [ 36.061] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input13/event10"
    [ 36.061] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
    [ 36.061] (**) Option "xkb_rules" "evdev"
    [ 36.061] (**) Option "xkb_model" "pc104"
    [ 36.061] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 36.062] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
    [ 36.062] (II) No input driver specified, ignoring this device.
    [ 36.062] (II) This device may have been added with another device file.
    [ 36.063] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
    [ 36.063] (II) No input driver specified, ignoring this device.
    [ 36.063] (II) This device may have been added with another device file.
    [ 36.063] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
    [ 36.063] (II) No input driver specified, ignoring this device.
    [ 36.063] (II) This device may have been added with another device file.
    [ 36.064] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
    [ 36.064] (II) No input driver specified, ignoring this device.
    [ 36.064] (II) This device may have been added with another device file.
    [ 36.064] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
    [ 36.064] (II) No input driver specified, ignoring this device.
    [ 36.064] (II) This device may have been added with another device file.
    [ 53.210] (II) RADEON(0): EDID vendor "BBY", prod id 47904
    [ 53.210] (II) RADEON(0): Using EDID range info for horizontal sync
    [ 53.210] (II) RADEON(0): Using EDID range info for vertical refresh
    [ 53.210] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 53.210] (II) RADEON(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
    [ 53.210] (II) RADEON(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
    [ 62.870] (II) AIGLX: Suspending AIGLX clients for VT switch
    Last edited by mavo (2015-03-17 13:08:53)

    alphaniner wrote:The preferred way to test a 'default session' is with a clean non-root user. Logging in as root can hide other issues.
    Ok i get that. Here is xorg log and journalctl -b log. I rebooted tried to login through lxdm and got the cursor and blank screen. I then tty3 and startx and launched into openbox to post these results. Still cannot get into xfce as normal user. Thoughts???
    ~.local/share/xorg/Xorg.1.log
    [ 84.848]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 84.848] X Protocol Version 11, Revision 0
    [ 84.848] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 84.848] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
    [ 84.848] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
    [ 84.848] Build Date: 14 March 2015 06:45:50PM
    [ 84.849]
    [ 84.849] Current version of pixman: 0.32.6
    [ 84.849] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 84.849] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 84.850] (==) Log file: "/home/molmedo1/.local/share/xorg/Xorg.1.log", Time: Wed Mar 18 10:06:18 2015
    [ 84.850] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 84.850] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 84.851] (==) No Layout section. Using the first Screen section.
    [ 84.851] (**) |-->Screen "Default Screen" (0)
    [ 84.851] (**) | |-->Monitor "<default monitor>"
    [ 84.851] (==) No monitor specified for screen "Default Screen".
    Using a default monitor configuration.
    [ 84.851] (==) Automatically adding devices
    [ 84.851] (==) Automatically enabling devices
    [ 84.851] (==) Automatically adding GPU devices
    [ 84.851] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 84.851] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 84.851] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 84.851] (II) Loader magic: 0x815d80
    [ 84.851] (II) Module ABI versions:
    [ 84.851] X.Org ANSI C Emulation: 0.4
    [ 84.851] X.Org Video Driver: 19.0
    [ 84.851] X.Org XInput driver : 21.0
    [ 84.851] X.Org Server Extension : 9.0
    [ 84.856] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
    [ 84.856] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 84.857] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 84.859] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
    [ 84.859] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 84.859] (II) "glx" will be loaded by default.
    [ 84.859] (II) LoadModule: "vnc"
    [ 84.860] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
    [ 84.868] (II) Module vnc: vendor="Constantin Kaplinsky"
    [ 84.868] compiled for 1.17.1, module version = 1.0.0
    [ 84.868] Module class: X.Org Server Extension
    [ 84.868] ABI class: X.Org Server Extension, version 9.0
    [ 84.868] (II) LoadModule: "glx"
    [ 84.868] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 84.870] (II) Module glx: vendor="X.Org Foundation"
    [ 84.870] compiled for 1.17.1, module version = 1.0.0
    [ 84.870] ABI class: X.Org Server Extension, version 9.0
    [ 84.870] (==) AIGLX enabled
    [ 84.870] (==) Matched ati as autoconfigured driver 0
    [ 84.870] (==) Matched ati as autoconfigured driver 1
    [ 84.870] (==) Matched modesetting as autoconfigured driver 2
    [ 84.870] (==) Matched fbdev as autoconfigured driver 3
    [ 84.870] (==) Matched vesa as autoconfigured driver 4
    [ 84.870] (==) Assigned the driver to the xf86ConfigLayout
    [ 84.870] (II) LoadModule: "ati"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 84.871] (II) Module ati: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 7.5.0
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "radeon"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 84.871] (II) Module radeon: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 7.5.0
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "modesetting"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 84.871] (II) Module modesetting: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.1, module version = 1.17.1
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "fbdev"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 84.871] (II) Module fbdev: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 0.4.4
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "vesa"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 84.871] (II) Module vesa: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 2.3.2
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
    BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
    HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
    [ 84.876] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 84.876] (II) FBDEV: driver for framebuffer: fbdev
    [ 84.876] (II) VESA: driver for VESA chipsets: vesa
    [ 84.876] (++) using VT number 3
    [ 84.876] (--) controlling tty is VT number 3, auto-enabling KeepTty
    [ 84.876] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
    [ 84.876] (II) [KMS] Kernel modesetting enabled.
    [ 84.876] (WW) Falling back to old probe method for modesetting
    [ 84.876] (WW) Falling back to old probe method for fbdev
    [ 84.876] (II) Loading sub module "fbdevhw"
    [ 84.876] (II) LoadModule: "fbdevhw"
    [ 84.876] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 84.876] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 84.876] compiled for 1.17.1, module version = 0.0.2
    [ 84.876] ABI class: X.Org Video Driver, version 19.0
    [ 84.876] (WW) Falling back to old probe method for vesa
    [ 84.876] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
    [ 84.876] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
    [ 84.876] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 84.876] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 84.876] (==) RADEON(0): Default visual is TrueColor
    [ 84.876] (==) RADEON(0): RGB weight 888
    [ 84.876] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 84.876] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
    [ 84.876] (II) Loading sub module "dri2"
    [ 84.876] (II) LoadModule: "dri2"
    [ 84.876] (II) Module "dri2" already built-in
    [ 84.876] (II) Loading sub module "exa"
    [ 84.876] (II) LoadModule: "exa"
    [ 84.877] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 84.877] (II) Module exa: vendor="X.Org Foundation"
    [ 84.877] compiled for 1.17.1, module version = 2.6.0
    [ 84.877] ABI class: X.Org Video Driver, version 19.0
    [ 84.877] (II) RADEON(0): KMS Color Tiling: enabled
    [ 84.877] (II) RADEON(0): KMS Color Tiling 2D: enabled
    [ 84.877] (II) RADEON(0): KMS Pageflipping: enabled
    [ 84.877] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 84.920] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 84.951] (II) RADEON(0): Output HDMI-0 has no monitor section
    [ 84.990] (II) RADEON(0): EDID for output VGA-0
    [ 85.021] (II) RADEON(0): EDID for output HDMI-0
    [ 85.021] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
    [ 85.021] (II) RADEON(0): Year: 2012 Week: 0
    [ 85.021] (II) RADEON(0): EDID Version: 1.3
    [ 85.021] (II) RADEON(0): Digital Display Input
    [ 85.021] (II) RADEON(0): DFP 1.x compatible TMDS
    [ 85.021] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
    [ 85.021] (II) RADEON(0): Gamma: 2.20
    [ 85.021] (II) RADEON(0): DPMS capabilities: Off
    [ 85.021] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 85.021] (II) RADEON(0): First detailed timing is preferred mode
    [ 85.021] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
    [ 85.021] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
    [ 85.021] (II) RADEON(0): Supported established timings:
    [ 85.021] (II) RADEON(0): 720x400@70Hz
    [ 85.021] (II) RADEON(0): 640x480@60Hz
    [ 85.021] (II) RADEON(0): 640x480@67Hz
    [ 85.021] (II) RADEON(0): 640x480@72Hz
    [ 85.021] (II) RADEON(0): 640x480@75Hz
    [ 85.021] (II) RADEON(0): 800x600@56Hz
    [ 85.021] (II) RADEON(0): 800x600@60Hz
    [ 85.021] (II) RADEON(0): 800x600@72Hz
    [ 85.021] (II) RADEON(0): 800x600@75Hz
    [ 85.021] (II) RADEON(0): 832x624@75Hz
    [ 85.021] (II) RADEON(0): 1024x768@60Hz
    [ 85.021] (II) RADEON(0): 1024x768@70Hz
    [ 85.021] (II) RADEON(0): 1024x768@75Hz
    [ 85.021] (II) RADEON(0): 1280x1024@75Hz
    [ 85.021] (II) RADEON(0): 1152x864@75Hz
    [ 85.021] (II) RADEON(0): Manufacturer's mask: 0
    [ 85.021] (II) RADEON(0): Supported standard timings:
    [ 85.021] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 85.021] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 85.021] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 85.021] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 85.021] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 85.021] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 85.021] (II) RADEON(0): Supported detailed timing:
    [ 85.021] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
    [ 85.021] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
    [ 85.021] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
    [ 85.021] (II) RADEON(0): Supported detailed timing:
    [ 85.021] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
    [ 85.021] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
    [ 85.021] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
    [ 85.021] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
    [ 85.021] (II) RADEON(0): Monitor name: NS-20EM50A13
    [ 85.021] (II) RADEON(0): EDID (in hex):
    [ 85.021] (II) RADEON(0): 00ffffffffffff00085920bb01010101
    [ 85.021] (II) RADEON(0): 00160103812c19782a3c25a554559f27
    [ 85.021] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
    [ 85.021] (II) RADEON(0): 81c0010101012f2640a060841a303020
    [ 85.021] (II) RADEON(0): 3500baf91000001a662150b051001b30
    [ 85.021] (II) RADEON(0): 40703600baf91000001e000000fd0037
    [ 85.022] (II) RADEON(0): 4c1e520f000a202020202020000000fc
    [ 85.022] (II) RADEON(0): 004e532d3230454d35304131330a00a6
    [ 85.022] (II) RADEON(0): Printing probed modes for output HDMI-0
    [ 85.022] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
    [ 85.022] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 85.022] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 85.022] (II) RADEON(0): Output VGA-0 disconnected
    [ 85.022] (II) RADEON(0): Output HDMI-0 connected
    [ 85.022] (II) RADEON(0): Using exact sizes for initial modes
    [ 85.022] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
    [ 85.022] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 85.022] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
    [ 85.022] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 85.022] (==) RADEON(0): DPI set to (96, 96)
    [ 85.022] (II) Loading sub module "fb"
    [ 85.022] (II) LoadModule: "fb"
    [ 85.022] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 85.022] (II) Module fb: vendor="X.Org Foundation"
    [ 85.022] compiled for 1.17.1, module version = 1.0.0
    [ 85.022] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 85.022] (II) Loading sub module "ramdac"
    [ 85.022] (II) LoadModule: "ramdac"
    [ 85.022] (II) Module "ramdac" already built-in
    [ 85.022] (II) UnloadModule: "modesetting"
    [ 85.022] (II) Unloading modesetting
    [ 85.022] (II) UnloadModule: "fbdev"
    [ 85.022] (II) Unloading fbdev
    [ 85.022] (II) UnloadSubModule: "fbdevhw"
    [ 85.022] (II) Unloading fbdevhw
    [ 85.022] (II) UnloadModule: "vesa"
    [ 85.022] (II) Unloading vesa
    [ 85.022] (--) Depth 24 pixmap format is 32 bpp
    [ 85.023] (II) RADEON(0): [DRI2] Setup complete
    [ 85.023] (II) RADEON(0): [DRI2] DRI driver: r600
    [ 85.023] (II) RADEON(0): [DRI2] VDPAU driver: r600
    [ 85.023] (II) RADEON(0): Front buffer size: 5652K
    [ 85.023] (II) RADEON(0): VRAM usage limit set to 225496K
    [ 85.023] (==) RADEON(0): Backing store enabled
    [ 85.023] (II) RADEON(0): Direct rendering enabled
    [ 85.023] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 85.023] (II) EXA(0): Driver registered support for the following operations:
    [ 85.023] (II) Solid
    [ 85.023] (II) Copy
    [ 85.023] (II) Composite (RENDER acceleration)
    [ 85.023] (II) UploadToScreen
    [ 85.023] (II) DownloadFromScreen
    [ 85.023] (II) RADEON(0): Acceleration enabled
    [ 85.023] (==) RADEON(0): DPMS enabled
    [ 85.023] (==) RADEON(0): Silken mouse enabled
    [ 85.023] (II) RADEON(0): Set up textured video
    [ 85.023] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [ 85.023] (II) RADEON(0): [XvMC] Extension initialized.
    [ 85.023] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 85.023] (WW) RADEON(0): Option "PasswordFile" is not used
    [ 85.023] (--) RandR disabled
    [ 85.047] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 85.047] (II) AIGLX: enabled GLX_ARB_create_context
    [ 85.047] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 85.047] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 85.047] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 85.047] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 85.047] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 85.047] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 85.047] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 85.048] (II) AIGLX: Loaded and initialized r600
    [ 85.048] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 85.048] (II) RADEON(0): Setting screen physical size to 423 x 238
    [ 85.088] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 85.088] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 85.088] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 85.088] (II) LoadModule: "evdev"
    [ 85.088] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 85.089] (II) Module evdev: vendor="X.Org Foundation"
    [ 85.089] compiled for 1.16.2, module version = 2.9.1
    [ 85.089] Module class: X.Org XInput Driver
    [ 85.089] ABI class: X.Org XInput driver, version 21.0
    [ 85.089] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 13 paused 0
    [ 85.090] (II) Using input driver 'evdev' for 'Power Button'
    [ 85.090] (**) Power Button: always reports core events
    [ 85.090] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 85.090] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 85.090] (--) evdev: Power Button: Found keys
    [ 85.090] (II) evdev: Power Button: Configuring as keyboard
    [ 85.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
    [ 85.090] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 85.090] (**) Option "xkb_rules" "evdev"
    [ 85.090] (**) Option "xkb_model" "pc104"
    [ 85.090] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.123] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 85.123] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 85.123] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 85.124] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 14 paused 0
    [ 85.124] (II) Using input driver 'evdev' for 'Power Button'
    [ 85.124] (**) Power Button: always reports core events
    [ 85.124] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 85.124] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 85.124] (--) evdev: Power Button: Found keys
    [ 85.124] (II) evdev: Power Button: Configuring as keyboard
    [ 85.124] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
    [ 85.124] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 85.124] (**) Option "xkb_rules" "evdev"
    [ 85.124] (**) Option "xkb_model" "pc104"
    [ 85.124] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.125] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
    [ 85.125] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 15 paused 0
    [ 85.125] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
    [ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
    [ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
    [ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
    [ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
    [ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 85.125] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
    [ 85.125] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
    [ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
    [ 85.126] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
    [ 85.126] (II) No input driver specified, ignoring this device.
    [ 85.126] (II) This device may have been added with another device file.
    [ 85.126] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
    [ 85.126] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 85.126] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 85.126] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 16 paused 0
    [ 85.126] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 85.126] (**) Generic USB Keyboard: always reports core events
    [ 85.126] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
    [ 85.126] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 85.126] (--) evdev: Generic USB Keyboard: Found keys
    [ 85.126] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 85.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:040B:2000.0004/input/input10/event7"
    [ 85.126] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
    [ 85.126] (**) Option "xkb_rules" "evdev"
    [ 85.126] (**) Option "xkb_model" "pc104"
    [ 85.126] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.127] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
    [ 85.127] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 85.127] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 85.127] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 17 paused 0
    [ 85.127] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 85.127] (**) Generic USB Keyboard: always reports core events
    [ 85.127] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
    [ 85.127] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 85.127] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
    [ 85.127] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
    [ 85.127] (--) evdev: Generic USB Keyboard: Found relative axes
    [ 85.127] (--) evdev: Generic USB Keyboard: Found x and y relative axes
    [ 85.127] (--) evdev: Generic USB Keyboard: Found keys
    [ 85.127] (II) evdev: Generic USB Keyboard: Configuring as mouse
    [ 85.127] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 85.127] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
    [ 85.127] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
    [ 85.127] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 85.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:040B:2000.0005/input/input11/event8"
    [ 85.127] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
    [ 85.127] (**) Option "xkb_rules" "evdev"
    [ 85.127] (**) Option "xkb_model" "pc104"
    [ 85.127] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.128] (II) evdev: Generic USB Keyboard: initialized for relative axes.
    [ 85.128] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
    [ 85.128] (**) Generic USB Keyboard: (accel) acceleration profile 0
    [ 85.128] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
    [ 85.128] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
    [ 85.128] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
    [ 85.128] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 85.128] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 85.128] (**) Generic USB Keyboard: always reports core events
    [ 85.128] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
    [ 85.128] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
    [ 85.220] (EE) PreInit returned 2 for "Generic USB Keyboard"
    [ 85.220] (II) UnloadModule: "evdev"
    [ 85.220] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
    [ 85.220] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
    [ 85.220] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
    [ 85.221] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 18 paused 0
    [ 85.221] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
    [ 85.221] (**) HP Webcam HD-2200: always reports core events
    [ 85.221] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
    [ 85.221] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
    [ 85.221] (--) evdev: HP Webcam HD-2200: Found keys
    [ 85.221] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
    [ 85.221] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb6/6-5/6-5:1.0/input/input13/event10"
    [ 85.222] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
    [ 85.222] (**) Option "xkb_rules" "evdev"
    [ 85.222] (**) Option "xkb_model" "pc104"
    [ 85.222] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.223] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
    [ 85.223] (II) No input driver specified, ignoring this device.
    [ 85.223] (II) This device may have been added with another device file.
    [ 85.223] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
    [ 85.223] (II) No input driver specified, ignoring this device.
    [ 85.223] (II) This device may have been added with another device file.
    [ 85.224] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
    [ 85.224] (II) No input driver specified, ignoring this device.
    [ 85.224] (II) This device may have been added with another device file.
    [ 85.224] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
    [ 85.225] (II) No input driver specified, ignoring this device.
    [ 85.225] (II) This device may have been added with another device file.
    [ 85.225] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
    [ 85.225] (II) No input driver specified, ignoring this device.
    [ 85.225] (II) This device may have been added with another device file.
    journalctl -b
    Mar 18 10:05:02 arch-server kernel: 00000-9FFFF write-back
    Mar 18 10:05:02 arch-server kernel: A0000-EFFFF uncachable
    Mar 18 10:05:02 arch-server kernel: F0000-FFFFF write-protect
    Mar 18 10:05:02 arch-server kernel: MTRR variable ranges enabled:
    Mar 18 10:05:02 arch-server kernel: 0 base 000000000000 mask FFFF80000000 write-back
    Mar 18 10:05:02 arch-server kernel: 1 base 000080000000 mask FFFFC0000000 write-back
    Mar 18 10:05:02 arch-server kernel: 2 base 0000C0000000 mask FFFFF0000000 write-back
    Mar 18 10:05:02 arch-server kernel: 3 disabled
    Mar 18 10:05:02 arch-server kernel: 4 disabled
    Mar 18 10:05:02 arch-server kernel: 5 disabled
    Mar 18 10:05:02 arch-server kernel: 6 disabled
    Mar 18 10:05:02 arch-server kernel: 7 disabled
    Mar 18 10:05:02 arch-server kernel: TOM2: 0000000430000000 aka 17152M
    Mar 18 10:05:03 arch-server kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Mar 18 10:05:03 arch-server kernel: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
    Mar 18 10:05:03 arch-server kernel: e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
    Mar 18 10:05:03 arch-server kernel: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
    Mar 18 10:05:03 arch-server kernel: Scanning 1 areas for low memory corruption
    Mar 18 10:05:03 arch-server kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Mar 18 10:05:03 arch-server kernel: Using GB pages for direct mapping
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x00000000-0x000fffff] page 4k
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b3e000, 0x01b3efff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b40000, 0x01b40fff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41fe00000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x41fe00000-0x41fffffff] page 2M
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b41000, 0x01b41fff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41c000000-0x41fdfffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x41c000000-0x41fdfffff] page 2M
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x400000000-0x41bffffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x400000000-0x41bffffff] page 2M
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00100000-0xcff8ffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x00100000-0x001fffff] page 4k
    Mar 18 10:05:03 arch-server kernel: [mem 0x00200000-0x3fffffff] page 2M
    Mar 18 10:05:03 arch-server kernel: [mem 0x40000000-0xbfffffff] page 1G
    Mar 18 10:05:03 arch-server kernel: [mem 0xc0000000-0xcfdfffff] page 2M
    Mar 18 10:05:03 arch-server kernel: [mem 0xcfe00000-0xcff8ffff] page 4k
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x100000000-0x3ffffffff] page 1G
    Mar 18 10:05:03 arch-server kernel: RAMDISK: [mem 0x3784e000-0x37c1efff]
    Mar 18 10:05:03 arch-server kernel: ACPI: RSDP 00000000000f8d00 000014 (v00 ACPIAM)
    Mar 18 10:05:03 arch-server kernel: ACPI: RSDT 00000000cff90000 00003C (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: FACP 00000000cff90200 000084 (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131218/
    Mar 18 10:05:03 arch-server kernel: ACPI: DSDT 00000000cff90660 009DF0 (v01 A7641 A7641100 00000100 INTL 20051117)
    Mar 18 10:05:03 arch-server kernel: ACPI: FACS 00000000cff9e000 000040
    Mar 18 10:05:03 arch-server kernel: ACPI: APIC 00000000cff90390 00010C (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: MCFG 00000000cff904a0 00003C (v01 7641MS OEMMCFG 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: OEMB 00000000cff9e040 000072 (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: HPET 00000000cff9a660 000038 (v01 7641MS OEMHPET 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: SSDT 00000000cff9a6a0 000D40 (v01 A M I POWERNOW 00000001 AMD 00000001)
    Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
    Mar 18 10:05:03 arch-server kernel: No NUMA configuration found
    Mar 18 10:05:03 arch-server kernel: Faking a node at [mem 0x0000000000000000-0x000000041fffffff]
    Mar 18 10:05:03 arch-server kernel: Initmem setup node 0 [mem 0x00000000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: NODE_DATA [mem 0x41fff9000-0x41fffdfff]
    Mar 18 10:05:03 arch-server kernel: [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040fa00000-ffff88041f5fffff] on node 0
    Mar 18 10:05:03 arch-server kernel: Zone ranges:
    Mar 18 10:05:03 arch-server kernel: DMA [mem 0x00001000-0x00ffffff]
    Mar 18 10:05:03 arch-server kernel: DMA32 [mem 0x01000000-0xffffffff]
    Mar 18 10:05:03 arch-server kernel: Normal [mem 0x100000000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: Movable zone start for each node
    Mar 18 10:05:03 arch-server kernel: Early memory node ranges
    Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00001000-0x0009efff]
    Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00100000-0xcff8ffff]
    Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x100000000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: On node 0 totalpages: 4128558
    Mar 18 10:05:03 arch-server kernel: DMA zone: 64 pages used for memmap
    Mar 18 10:05:03 arch-server kernel: DMA zone: 21 pages reserved
    Mar 18 10:05:03 arch-server kernel: DMA zone: 3998 pages, LIFO batch:0
    Mar 18 10:05:03 arch-server kernel: DMA32 zone: 13247 pages used for memmap
    Mar 18 10:05:03 arch-server kernel: DMA32 zone: 847760 pages, LIFO batch:31
    Mar 18 10:05:03 arch-server kernel: Normal zone: 51200 pages used for memmap
    Mar 18 10:05:03 arch-server kernel: Normal zone: 3276800 pages, LIFO batch:31
    Mar 18 10:05:03 arch-server kernel: ACPI: PM-Timer IO Port: 0x808
    Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: IOAPIC (id[0x14] address[0xfec00000] gsi_base[0])
    Mar 18 10:05:03 arch-server kernel: IOAPIC[0]: apic_id 20, version 33, address 0xfec00000, GSI 0-23
    Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Mar 18 10:05:03 arch-server kernel: ACPI: IRQ0 used by override.
    Mar 18 10:05:03 arch-server kernel: ACPI: IRQ2 used by override.
    Mar 18 10:05:03 arch-server kernel: ACPI: IRQ9 used by override.
    Mar 18 10:05:03 arch-server kernel: Using ACPI (MADT) for SMP configuration information
    Mar 18 10:05:03 arch-server kernel: ACPI: HPET id: 0x8300 base: 0xfed00000
    Mar 18 10:05:03 arch-server kernel: smpboot: Allowing 24 CPUs, 20 hotplug CPUs
    Mar 18 10:05:03 arch-server kernel: nr_irqs_gsi: 40
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff90000-0xcff9dfff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff9e000-0xcffdffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xd0000000-0xffdfffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    Mar 18 10:05:03 arch-server kernel: e820: [mem 0xd0000000-0xffdfffff] available for PCI devices
    Mar 18 10:05:03 arch-server kernel: Booting paravirtualized kernel on bare hardware
    Mar 18 10:05:03 arch-server kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:24 nr_node_ids:1
    Mar 18 10:05:03 arch-server kernel: PERCPU: Embedded 27 pages/cpu @ffff88040f600000 s81664 r8192 d20736 u131072
    Mar 18 10:05:03 arch-server kernel: pcpu-alloc: s81664 r8192 d20736 u131072 alloc=1*2097152
    Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- --
    Mar 18 10:05:03 arch-server kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4064026
    Mar 18 10:05:03 arch-server kernel: Policy zone: Normal
    Mar 18 10:05:03 arch-server kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
    Mar 18 10:05:03 arch-server kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Mar 18 10:05:03 arch-server kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340
    Mar 18 10:05:03 arch-server kernel: Checking aperture...
    Mar 18 10:05:03 arch-server kernel: No AGP bridge found
    Mar 18 10:05:03 arch-server kernel: Node 0: aperture @ 0 size 32 MB
    Mar 18 10:05:03 arch-server kernel: Your BIOS doesn't leave a aperture memory hole
    Mar 18 10:05:03 arch-server kernel: Please enable the IOMMU option in the BIOS setup
    Mar 18 10:05:03 arch-server kernel: This costs you 64 MB of RAM
    Mar 18 10:05:03 arch-server kernel: Mapping aperture over 65536 KB of RAM @ c4000000
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
    Mar 18 10:05:03 arch-server kernel: Memory: 16106196K/16514232K available (5183K kernel code, 859K rwdata, 1640K rodata, 1128K init, 1300K bss, 408036K reserv
    Mar 18 10:05:03 arch-server kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
    Mar 18 10:05:03 arch-server kernel: Hierarchical RCU implementation.
    Mar 18 10:05:03 arch-server kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=24.
    Mar 18 10:05:03 arch-server kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
    Mar 18 10:05:03 arch-server kernel: NR_IRQS:8448 nr_irqs:872 16
    Mar 18 10:05:03 arch-server kernel: spurious 8259A interrupt: IRQ7.
    Mar 18 10:05:03 arch-server kernel: Console: colour dummy device 80x25
    Mar 18 10:05:03 arch-server kernel: console [tty0] enabled
    Mar 18 10:05:03 arch-server kernel: allocated 66060288 bytes of page_cgroup
    Mar 18 10:05:03 arch-server kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Mar 18 10:05:03 arch-server kernel: hpet clockevent registered
    Mar 18 10:05:03 arch-server kernel: tsc: Fast TSC calibration using PIT
    Mar 18 10:05:03 arch-server kernel: tsc: Detected 4199.946 MHz processor
    Mar 18 10:05:03 arch-server kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 8399.89 BogoMIPS (lpj=41999460)
    Mar 18 10:05:03 arch-server kernel: pid_max: default: 32768 minimum: 301
    Mar 18 10:05:03 arch-server kernel: ACPI: Core revision 20131218
    Mar 18 10:05:03 arch-server kernel: ACPI: All ACPI Tables successfully acquired
    Mar 18 10:05:03 arch-server kernel: Security Framework initialized
    Mar 18 10:05:03 arch-server kernel: Yama: becoming mindful.
    Mar 18 10:05:03 arch-server kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    Mar 18 10:05:03 arch-server kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Mar 18 10:05:03 arch-server kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    Mar 18 10:05:03 arch-server kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys memory
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys devices
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys freezer
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys net_cls
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys blkio
    Mar 18 10:05:03 arch-server kernel: tseg: 0000000000
    Mar 18 10:05:03 arch-server kernel: CPU: Physical Processor ID: 0
    Mar 18 10:05:03 arch-server kernel: CPU: Processor Core ID: 0
    Mar 18 10:05:03 arch-server kernel: mce: CPU supports 7 MCE banks
    Mar 18 10:05:03 arch-server kernel: LVT offset 1 assigned for vector 0xf9
    Mar 18 10:05:03 arch-server kernel: Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
    tlb_flushall_shift: 6
    Mar 18 10:05:03 arch-server kernel: Freeing SMP alternatives memory: 20K (ffffffff819f2000 - ffffffff819f7000)
    Mar 18 10:05:03 arch-server kernel: ftrace: allocating 20141 entries in 79 pages
    Mar 18 10:05:03 arch-server kernel: Switched APIC routing to physical flat.
    Mar 18 10:05:03 arch-server kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Mar 18 10:05:03 arch-server kernel: smpboot: CPU0: AMD FX(tm)-4170 Quad-Core Processor (fam: 15, model: 01, stepping: 02)
    Mar 18 10:05:03 arch-server kernel: Performance Events: Fam15h core perfctr, AMD PMU driver.
    Mar 18 10:05:03 arch-server kernel: ... version: 0
    Mar 18 10:05:03 arch-server kernel: ... bit width: 48
    Mar 18 10:05:03 arch-server kernel: ... generic registers: 6
    Mar 18 10:05:03 arch-server kernel: ... value mask: 0000ffffffffffff
    Mar 18 10:05:03 arch-server kernel: ... max period: 00007fffffffffff
    Mar 18 10:05:03 arch-server kernel: ... fixed-purpose events: 0
    Mar 18 10:05:03 arch-server kernel: ... event mask: 000000000000003f
    Mar 18 10:05:03 arch-server kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Mar 18 10:05:03 arch-server kernel: x86: Booting SMP configuration:
    Mar 18 10:05:03 arch-server kernel: .... node #0, CPUs: #1 #2 #3
    Mar 18 10:05:03 arch-server kernel: x86: Booted up 1 node, 4 CPUs
    Mar 18 10:05:03 arch-server kernel: smpboot: Total of 4 processors activated (33599.56 BogoMIPS)
    Mar 18 10:05:03 arch-server kernel: devtmpfs: initialized
    Mar 18 10:05:03 arch-server kernel: PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes)
    Mar 18 10:05:03 arch-server kernel: pinctrl core: initialized pinctrl subsystem
    Mar 18 10:05:03 arch-server kernel: RTC time: 15:04:53, date: 03/18/15
    Mar 18 10:05:03 arch-server kernel: NET: Registered protocol family 16
    Mar 18 10:05:03 arch-server kernel: cpuidle: using governor ladder
    Mar 18 10:05:03 arch-server kernel: cpuidle: using governor menu
    Mar 18 10:05:03 arch-server kernel: ACPI: bus type PCI registered
    Mar 18 10:05:03 arch-server kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 18 10:05:03 arch-server kernel: PCI: not using MMCONFIG
    Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for base access
    Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for extended access
    Mar 18 10:05:03 arch-server kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    Mar 18 10:05:03 arch-server kernel: mtrr: probably your BIOS does not setup all CPUs.
    Mar 18 10:05:03 arch-server kernel: mtrr: corrected configuration.
    Mar 18 10:05:03 arch-server kernel: bio: create slab <bio-0> at 0
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Module Device)
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Device)
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Mar 18 10:05:03 arch-server kernel: ACPI: Executed 4 blocks of module-level executable AML code
    Mar 18 10:05:03 arch-server kernel: ACPI: Interpreter enabled
    Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580)
    Mar 18 10:05:03 arch-server kernel: ACPI: (supports S0 S1 S4 S5)
    Mar 18 10:05:03 arch-server kernel: ACPI: Using IOAPIC for interrupt routing
    Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Mar 18 10:05:03 arch-server kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Mar 18 10:05:03 arch-server kernel: ACPI: No dock devices found.
    Mar 18 10:05:03 arch-server kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    Mar 18 10:05:03 arch-server kernel: PCI host bridge to bus 0000:00
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: set SATA to AHCI mode
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: supports D1 D2
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: System wakeup disabled by ACP

  • After installing 10.9.4 computer freezes  after sleep

    After I installed 10.9.4, my Imac bean to freeze after being asleep.  Sometimes I can move the mouse, but it has no effect on anything.  Most of the time I move the mouse or keyboard and I get eh color wheel of death.  Here is my info, can you help?
    EtreCheck version: 1.9.12 (48)
    Report generated August 6, 2014 at 7:06:43 PM MDT
    Hardware Information:
      iMac (27-inch, Mid 2010) (Verified)
      iMac - model: iMac11,3
      1 2.93 GHz Intel Core i7 CPU: 4 cores
      8 GB RAM
    Video Information:
      ATI Radeon HD 5750 - VRAM: 1024 MB
      iMac 2560 x 1440
    System Software:
      OS X 10.9.4 (13E28) - Uptime: 0 days 5:12:25
    Disk Information:
      WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 902.82 GB (631.84 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 84.56 GB (38.76 GB free)
      PIONEER DVD-RW  DVRTS09 
    USB Information:
      Apple Inc. iPhone
      Logitech USB Receiver
      Apple Internal Memory Card Reader 31.91 GB
      NIKON D7000 (disk1s1) /Volumes/NIKON D7000: 31.91 GB (28.3 GB free)
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple, Inc. Keyboard Hub
      Fitbit Inc. Fitbit Base Station
      Apple, Inc Apple Keyboard
      Apple Computer, Inc. IR Receiver
      Apple Inc. Built-in iSight
    FireWire Information:
      G-TECH OEM ATA Device 00 800mbit - 800mbit max
      EFI (disk2s1) <not mounted>: 209.7 MB
      G-DRIVE (disk2s2) /Volumes/G-DRIVE: 999.86 GB (937.8 GB free)
    Gatekeeper:
      Mac App Store and identified developers
    Kernel Extensions:
      [not loaded] arcana.PRAM (6.1) Support
      [loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
      [loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
      [not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.52) Support
      [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) Support
    Startup Items:
      ArcanaStartupSound: Path: /Library/StartupItems/ArcanaStartupSound
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.avast.init.plist Support
      [loaded] com.avast.uninstall.plist Support
      [loaded] com.avast.update.plist Support
      [running] com.crashplan.engine.plist Support
      [running] com.fitbit.galileod.plist Support
      [failed] com.google.keystone.daemon.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [running] com.rim.BBDaemon.plist Support
      [loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
      [failed] com.vmware.launchd.vmware.plist Support
      [not loaded] com.vsearch.daemon.plist Support
      [failed] com.vsearch.helper.plist Support
    Launch Agents:
      [loaded] com.avast.userinit.plist Support
      [failed] com.google.keystone.agent.plist Support
      [running] com.rim.BBLaunchAgent.plist Support
      [failed] com.vsearch.agent.plist Support
    User Launch Agents:
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.avast.home.userinit.plist Support
      [running] com.google.keystone.agent.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
      [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
    User Login Items:
      SpeechSynthesisServer
      Canon IJ Network Scanner Selector EX
      Dropbox
      CrashPlan menu bar
      Fitbit Connect Menubar Helper
    Internet Plug-ins:
      Easy-WebPrint EX: Version: 1.1.0 Support
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
      AdobePDFViewerNPAPI: Version: 10.1.10 Support
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      Silverlight: Version: 5.1.10516.0 - SDK 10.6 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewer: Version: 10.1.10 Support
      npDDRia: Version: 0.0.14.2 - SDK 10.9 Support
      EPPEX Plugin: Version: 3.0.5.0 Support
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    Safari Extensions:
      avast! Online Security: Version: 9.0.2022.120
      1Password: Version: 4.2.3
      Dragon Dictate: Version: 12.81.000.006
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
      Flash Player  Support
      Flip4Mac WMV  Support
      Secrets  Support
      ArcanaStartupSound  Support
    Time Machine:
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Macintosh HD: Disk size: 840.81 GB Disk used: 252.37 GB
      Destinations:
      G-DRIVE [Local] (Last used)
      Total size: 931.19 GB
      Total number of backups: 33
      Oldest backup: 2014-03-03 19:34:10 +0000
      Last backup: 2014-03-13 00:00:27 +0000
      Size of backup disk: Adequate
      Backup size 931.19 GB > (Disk used 252.37 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          1% WindowServer
          1% fontd
          1% CrashPlan menu bar
          0% Fitbit Connect Menubar Helper
          0% Dropbox
    Top Processes by Memory:
      164 MB softwareupdated
      131 MB mds_stores
      131 MB com.avast.daemon
      123 MB CrashPlanService
      106 MB Finder
    Virtual Memory Information:
      4.89 GB Free RAM
      1.83 GB Active RAM
      525 MB Inactive RAM
      781 MB Wired RAM
      1.96 GB Page-ins
      0 B Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\) \\(.+\\)/\\\2x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • I attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded, now computer freezes after trying to load everything.  possible to reverse this?  options?  restore hd from time machine?  pls help!!!

    long story short...i attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded to my desktop and now my computer freezes up after trying to load everything, and i'm not able to just drag the photos into the folder.  is it possible to reverse this?  what are my options?  restore hd from time machine?  
    a further question to restoring my hd from a previous backup on time machine...it says it will erase the hd.  does it actually erase everything or does it just erase anything that may have been added or downloaded since that backup?  this is confusing to me.
    another problem which is part of the original problem is it seems that when i connect my iphone to my computer and iphoto uploads my pics...it doesn't just upload new ones, it duplicates and uploads every picture again...which is why i have 45,000 pics...they are 40,000 duplicates!  what's up with that? 
    I have a macbook pro, and recently updated the os to Yosemite.  the iphoto app is out of date, but i'll worry about that once i can figure out how to get all those pics off the desktop.  also, i recently purchased and installed 8g of new ram, but that hasn't seemed to help. 
    any advice would be appreciated! 
    thanks!!

    thanks for replying. 
    the booting and walking away and then attempting to browse and clean method is what i've been trying to do.  it won't let me drag and drop and just freezes up and goes to sleep after 2 minutes.  it's a never ending battle with very few results. which is why i questioned the method of just restoring the hd from a time machine backup.
    do you think restoring the hd from time machine will resolve the issue with all pics on the desktop?  and everything will be as it was from the date i restore it from?  sorry, as you can tell, i'm not overly computer savvy. 
    i have a really old desktop mac...i can try connecting the two...how does one boot a mac in 'target mode'? 
    as for the iphoto cleaning and organizing issue...that is what i was trying to accomplish with importing them to a folder.  was going to browse and clean from there...but somehow imported to desktop which is what's complicating everything.  once i get them off the desktop i can work on the iphoto issue...which as i mentioned...i didn't take 45,000 pics...i've just taken about 4,500 over the last few years, and they are being duplicated in iphoto.  this was my attempt to clean it out entirely and start over.  it will basically be a lot of deleting.
    one problem, seems to lead me to more...which is just my luck.  :-) 
    thanks again, for your help.

  • Computer freezes after Post (Cannot load/re-install windows)

    Hi!
    I have the K8T Neo-FIS2R motherboard 1.7 bios with an AMD Athlon 64 3000+  The computer loads up correctly, sees all of the memory, both CD rom drives, and both hard drives.  However, after the post my computer goes to the Load win XP in safe mode etc. and the computer freezes right there.  Also, when i try to reinstall windows XP, I just get past the boot from CD option and when it says setup is examining system hardware, it freezes at this screen and will not go any further; also when it does this, my numlock key blinks for some reason.  Any answers???

    Quote
    Originally posted by MSUHattrick
    fixed... just had to disable Legacy USB support
    That would have been our next route.. haha
    Good to hear, bro.
    Ian

  • [SOLVED] Broken SLiM after pacman -Syu

    I know that it's good to understand the rolling release approach from ArchLinux and that an update may have unforeseen consequences.
    Yesterday I wasn't that smart and updated my system using pacman -Syu. I'm having the system with SLiM and Cinnamon on top. Now
    when I login I get the message: "failed to execute login command".
    I already googled the error (SLIM+error) here: https://www.google.nl/#q=slim%20error%2 … %20command
    And I've checked .xinitrc and slim.conf. everything looks just fine.
    When I put in my ArchLinux cd, boot from it, /mnt my /dev/SDA1, bash and try to see what error I get from the system then I see a message
    about PulseAudio (but guess my check was useless ). Anyway, my Pacman log is down here, my log from SLiM and Xorg.
    Pacman:
    http://pastebin.com/Pe03DVNm
    Xorg.0:
    http://pastebin.com/AhVnQvex
    SLiM:
    http://pastebin.com/3LdcUBPc
    Am I that stupid? Guess so but well, who can help me out without reinstalling my system?
    My image I built with CloneZilla was corrupted so I'm kind of lost for now.
    Last edited by Anoniem (2013-10-14 10:00:17)

    .xinitrc:
    #!/bin/sh
    # ~/.xinitrc
    # Executed by startx (run your window manager from here)
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    exec gnome-session-cinnamon
    # exec startkde
    # exec startxfce4
    # ...or the Window Manager of your choice
    slim.conf:
    # Path, X server and arguments (if needed)
    # Note: -xauth $authfile is automatically appended
    default_path /bin:/usr/bin:/usr/local/bin
    default_xserver /usr/bin/X
    xserver_arguments -nolisten tcp vt07
    # Commands for halt, login, etc.
    halt_cmd /sbin/shutdown -h now
    reboot_cmd /sbin/shutdown -r now
    console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
    #suspend_cmd /usr/sbin/suspend
    # Full path to the xauth binary
    xauth_path /usr/bin/xauth
    # Xauth file for server
    authfile /var/run/slim.auth
    # Activate numlock when slim starts. Valid values: on|off
    # numlock on
    # Hide the mouse cursor (note: does not work with some WMs).
    # Valid values: true|false
    # hidecursor false
    # This command is executed after a succesful login.
    # you can place the %session and %theme variables
    # to handle launching of specific commands in .xinitrc
    # depending of chosen session and slim theme
    # NOTE: if your system does not have bash you need
    # to adjust the command according to your preferred shell,
    # i.e. for freebsd use:
    # login_cmd exec /bin/sh - ~/.xinitrc %session
    login_cmd exec /bin/bash -login ~/.xinitrc %session
    # Commands executed when starting and exiting a session.
    # They can be used for registering a X11 session with
    # sessreg. You can use the %user variable
    # sessionstart_cmd some command
    # sessionstop_cmd some command
    # Start in daemon mode. Valid values: yes | no
    # Note that this can be overriden by the command line
    # options "-d" and "-nodaemon"
    # daemon yes
    # Available sessions (first one is the default).
    # The current chosen session name is replaced in the login_cmd
    # above, so your login command can handle different sessions.
    # see the xinitrc.sample file shipped with slim sources
    sessions xfce4,icewm-session,wmaker,blackbox
    # Executed when pressing F11 (requires imagemagick)
    screenshot_cmd import -window root /slim.png
    # welcome message. Available variables: %host, %domain
    welcome_msg Welcome to %host
    # Session message. Prepended to the session name when pressing F1
    # session_msg Session:
    # shutdown / reboot messages
    shutdown_msg The system is halting...
    reboot_msg The system is rebooting...
    # default user, leave blank or remove this line
    # for avoid pre-loading the username.
    default_user farid
    # Focus the password field on start when default_user is set
    # Set to "yes" to enable this feature
    #focus_password no
    # Automatically login the default user (without entering
    # the password. Set to "yes" to enable this feature
    auto_login no
    # current theme, use comma separated list to specify a set to
    # randomly choose from
    current_theme archlinux
    # Lock file
    lockfile /var/lock/slim.lock
    # Log file
    logfile /var/log/slim.log

  • [SOLVED] X fails after pacman -Syu

    After a year or so without upgrading (not recommended) I did a pacman -Syu; it took like ages 'cause I was on kernel 2.26, and now my arch is a complete mess: user modules don't load at boot, dhcpcd is not working so I don't have internet access and the X server is erratic too. Now I have to repair it step by step, and I think I should start with X.
    Here is the startx/ xinit output:
    [root@HAL-9000 ~]# startx
    xauth: (argv):1: bad display name "HAL-9000:0" in "list" command
    xauth: (stdin):1: bad display name "HAL-9000:0" in "add" command
    X.Org X Server 1.11.2
    Release Date: 2011-11-04
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.1.1-1-ARCH i686
    Current Operating System: Linux HAL-9000 3.1.1-1-ARCH #1 SMP PREEMPT Fri Nov 11 22:05:37 UTC 2011 i686
    Kernel command line: root=/dev/disk/by-uuid/67fb73d6-b981-47d1-a07c-223b5b730551 ro vga=0x0318
    Build Date: 16 November 2011 11:26:40AM
    Current version of pixman: 0.24.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 20 19:02:40 2011
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (EE) synaptics: Touchpad: Synaptics driver unable to detect protocol
    (EE) PreInit returned 11 for "Touchpad"
    gnome-session: error while loading shared libraries: libdevkit-power-gobject.so.1: cannot open shared object file: No such file
    or directory
    xinit: connection to X server lost
    waiting for X server to shut down Server terminated successfully (0). Closing log file.
    I guess the gnome-session error with libdevkit-powe-gobject.so.1 is what causes the x server to close. And this is the complete X log:
    http://pastebin.com/UBficJVi
    *note: I have a Nvdia card which already worked perfectly with the privative driver, and supposedly I still have gnome 2 (that was the only packages group I didn't upgrade)
    Last edited by isacdaavid (2011-11-21 06:27:07)

    isacdaavid wrote:
    knopwob wrote:
    isacdaavid wrote:*note: I have a Nvdia card which already worked perfectly with the privative driver, and supposedly I still have gnome 2 (that was the only packages group I didn't upgrade)
    So you updated everything except gnome-stuff? Update the gnome-stuff.
    But I'm all for gnome 2 , and X should work despite of the gnome version or the desktop environment. Shouldn't it?
    No, not if you're using gdm or autoboot into gnome or something similar.
    gnome-session: error while loading shared libraries: libdevkit-power-gobject.so.1: cannot open shared object file: No such file
    or directory
    This sounds like one of gnome-sessions dependencies have been updated and isn't compatible with gnome-session anymore.
    Before you continue trying to repair your system, you should read this

Maybe you are looking for