Computer freezes up when trying to add contacts for photo sharing.

I am using Potoshop Elements 8. I have a short list of contacts for sharing photos from my previous Version 3. However, when I follow the instructions for adding a contact to my list my computer is freezing up forcing me to Cntrl>Alt>Delete.
Can anyone help?

can you preview it? -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
If that works fine and you still have problems boot into safe mode and try again
LN

Similar Messages

  • My computer freezes up when trying to upload photo book from iPhoto '11. This happens during the upload process.

    My computer freezes up when trying to upload photo book from iPhoto '11. This happens during the upload process.
    When this happens I need to close down the computer and restart.
    Any ideas ?
    I've got Mountain Lion running.
    I'm on a 13" white MacBook with 8GB RAM installed.
    I recently had a 1 TB hard disc installed at the Apple store.

    can you preview it? -
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    If that works fine and you still have problems boot into safe mode and try again
    LN

  • Captivate 5 freezing issue when trying to add closed captions to video

    Hi There --
    I'm trying to add closed captions to a video (.f4v) I inserted as "Slide Video" on a slide in an Adobe Captivate 5 presentation.  I click on the video to select it, go to the properties panel, select "edit video timing" and then click on the closed captions panel to try and add captions and then Captivate completely freezes and locks up so not only can I not add captions to the video, but I have to use Windows task manager to shut it down.
    I've seen this process demonstrated in a Lynda.com tutorial, and the instructor didn't seem to have this issue with Captivate 5.
    Any thoughts?  Have other users found a work around at all?  I mean, I know I could strip the audio from the video, and then attach it to the slide and do closed captions that way, but it would be way easier (and make a lot more sense) to add it directly to the video, especially since that's what you are supposed to be able to do.
    I'm using Captivate 5 on Windows 7.  I also have Captivate 5 on a personal Macintosh and haven't tried yet to see if the issue occurs on that platform as well.  Has anyone else run into this issue?  Sorry for the length -- this is my first forum posting, so I'm trying to provide as much info as possible.

    Hi Dan,
    Welcome to Adobe Captivate Forums.
    You can try to add the closed captions to Video after deleting the preferences.
    Follow these steps to delete the preferences
    1.  Close Captivate if its launched already
    2. Navigate to C:\Users\<userName>\AppData\Local\Adobe
    3. Locate a folder named "Captivate 5"
    4. Delete the folder
    5. Now Launch Captivate and try your workflow
    Let us know if this solved the issue .
    -Ashwin Bharghav B
    Adobe Captivate Team

  • No Keyboard - when trying to add Contacts to Favorites

    If I try to add a contact to My Favorites, after I click in the search field, the list of contacts dims but no keyboard appears for me to type. I'm not sure how long this problem has existed on my phone because its the first time I am trying to use this feature. Does anyone else have this problem and is there a fix for this ?

    The keyboard seems tied into the firmware somehow.
    You can try general resets
    http://support.apple.com/kb/HT1737
    Reset all settings and reset the phone with the two buttons might assist but you will likely end up restoring the iPhone and likely setting up as new.

  • System hangs up when trying to add a folder in "shared folders"

    I'm able to access all my files through a PC when I use the IP of my mac. (After I enable SMB). But instead of giving access to all folders, I would like to share only a couple of them. And whenever I try to add the required folder(s) the MAC hangs up (The menu bar disappears, right click doesn't work.finder doesn't open when clicked). And I have to hard shut down it. Happens everytime I try to add a folder.

    Investigate whether the target topic is actually in the project when you look using Windows Explorer. If these broken links are attributable to the folder bug, then right clicking and selecting Restore does fix the problem. I think there is more to the problem in this case.
    See www.grainge.org for RoboHelp and Authoring tips
    Follow me @petergrainge

  • HT201253 iTunes keeps freezing up when trying to sync my iPod on my Windows 7 computer.  Will not go past "Determining which tracks to sync".  Any advice?

    iTunes keeps freezing up when trying to sync my iPod on my Windows 7 computer.  Will not go past "Determining which tracks to sync".  Any advice?

    Hello clarikr,
    After reviewing your post, I have located an article that can help with iTunes for Windows. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • I get error message when trying to add key tags

    I get error message when trying to add key tags

    You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
    You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

  • When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

    When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • Bizarre error message when trying to add BT Vision...

    I am getting a bizarre message when trying to add BT Vision to my BT Infinity broadband which is due to install on Thursday.  I'm hoping it is only due to the fact the order has not completed and will be fine in a week.  I did speak to an "advisor" but I helpfully was told the line cannot be checked until the current order is complete and I'd obviously want to know if there will be any problem with me getting BT Vision prior to that!
    Has anyone else seen this error message and have any advice?  Note that I am definitely not in any trial and the 0800 number is now dead.

    Hi Evil_Dan,
    Welcome to the forum.
    If you can email in your details we'll check this, you can get our "Contact Us" link by clicking on my profile page.
    Thanks,
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • CUPC goes offline when trying to add user

    CUPC 8.03 will go offline and reconnect when trying to add a user and it will say something about unable to add user to group. I would have to check again to see exactly what it says. This is only happening on a few users. I have tried logging in with my account on their computer and I can add the same people they could not. I have tried deleting everything in their local settings and application data related to cisco with no luck.
    I attached a detailed and simple log.
    The user that I was trying to add was Patti
    Has anyone seen this before? We have had nothing but trouble since upgrading to CUPC 8

    Hello,
    Please go the user option page of the user for CUPS and check the privacy policy if they are blocked or not
    if that fails try re-licensing the users from callmanager > system > licensing > capabilities assignment > "concerned user"
    and then restart the "intercluster sync agent" service from CUPS.
    Thanks

  • HT2480 hi i am getting message that CANNOT GET MAIL  THE CONNECTION TO THE SERVER FAILED when trying to add official mail to Exchange in IPHONE 5

    hi i am getting message that CANNOT GET MAIL  THE CONNECTION TO THE SERVER FAILED when trying to add official mail to Exchange in IPHONE 5

    Talk to your IT department...
    Or if you're at University, talk to the computer team.
    Most Uni's are using outlook.com as the server connection not mail.youruniversity.edu

  • Labview crashes when trying to add CLIP

    When trying to add component level IP into Labview FPGA the program crashes (non-gracefully) when performing the check syntax.
    Steps to reproduce
    Load Project (Happens with a new unsaved project as well).
    Under FPGA Target (<Any Device>) -> Properties -> Component-Level IP
    Select Create File
    Add any VHDL file (also used the DemoClipAdder.vhd from the High-Throughput Example)
    Choose User-defined IP
    Check Syntax
    As syntax is being checked, the following appears in the log :
       Built simulation executable x.exe
       Fuse Memory Usage: 136412 KB
       Fuse CPU Usage: 468 ms
    Labview hangs for a couple of seconds then crashes
    Alternatively :
    Load Project (Or create a new project)
    Under FPGA Target (<Any Device>) -> New -> VI
    In Block Diagram, add IP Integration Block
    Save VI
    Double click IP Block
    Add Synthesis File -> DemoClipAdder.vhd
    Check Syntax (Completes successfully in this flow)
    Generate
    The following is produced in the log:
       Built simulation executable x.exe
       Fuse Memory Usage: 136668 KB
       Fuse CPU Usage: 421 ms
    Labview Hangs for a couple of seconds then Crashes
    I have tested this multiple times with multiple projects and FPGA devices with the same result every time.

    Hi ThatOtherGuy
    I have followed the steps to try to reproduce your problem but I have not been able to reproduce the error. I used this link to create the file and used notepad to create the file.
    The Check sintax is successful and I do not get any error.
    Have you try to do this in a different computer?
    Which operating system do you have?
    Which version of LabVIEW and drivers are you using?
    Regards
    Esteban R.

  • Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

    Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.  How can I fix this?
    Thanks
    [email protected]

    What is your operating system?  Reader version?

  • Computer shuts down when trying to create or open a pdf file

    My computer shuts down when trying to create or open a pdf file.

    In that case, you need to update the Acrobat Version at your end. Click on Help -> Check for Updates. Download and install the updates. Make sure your version is 9.5.1

  • Error  message when trying to add new user

    Hello,
    Customer is working on 2005B (2005B 7.40.252 SP00 PL39).
    They are working on this database since 2009.
    No upgrade was recently done.
    when trying to add a new user they get athe following error:
    "A user was added outsite the application. Delet it, or preform'Restore Numbering' [Message 3512-7]"
    Could you please advice.
    Regards,
    Maya

    Hi Maya......
    Go to Administration--> Utility and select the restore no. series.
    Update this and try to add User.
    But do it first in your test DB.....
    Regards,
    Rahul

Maybe you are looking for