Computer freezes upon trying to activate screen saver?

I recently went on vacation and downloaded some pictures to use as my screen saver. But everytime I go into Prefrences to choose a picture to be used as my screen saver, my computer freezes on me. Does anybody know how I can resolve this problem?

Ces:
A drive that's too full can cause all sorts of problems, but I doubt that freeing up space will, in itself, resolve it. Let's hope I'm wrong! We'll soon see, once you free up some space on your startup volume. If this is the only abberration you're experiencing with the operating system, I'd go ahead and resolve your drive space issue first, keeping this issue open for some suggestions from the Members.
BTW - The reason I previously asked if you can launch System Preferences and change the Screensaver to one of the standard ones (without crashing) is to eliminate the files in that particular pictures folder - as well as the slideshow routine that drives the screensaver - as the cause of the problem.
Gary

Similar Messages

  • Computer Freezes After iPhoto Album Mosaic Screen Saver

    After using the Mosaic screen saver, my Mac will freeze, therefore resulting in me having to perform a hard shutdown, and reboot my Mac. When my Mac turns back on and I log in, Crash Reporter reports that AdobeResourceSychronizer crashed. The log is found with in ~/Library/Logs/CrashReporter/ This occurs approximately once every 3-5 days. The only Adobe software I should have installed is:
    Reader
    Flash
    Shockwave
    I switched my screen saver about 1 1/2 weeks ago. I switched it to Spectrum today. Should this solve the issue, or should I check for Adobe junk installed on my computer, or both?

    After using the Mosaic screen saver, my Mac will freeze, therefore resulting in me having to perform a hard shutdown, and reboot my Mac. When my Mac turns back on and I log in, Crash Reporter reports that AdobeResourceSychronizer crashed. The log is found with in ~/Library/Logs/CrashReporter/ This occurs approximately once every 3-5 days. The only Adobe software I should have installed is:
    Reader
    Flash
    Shockwave
    I switched my screen saver about 1 1/2 weeks ago. I switched it to Spectrum today. Should this solve the issue, or should I check for Adobe junk installed on my computer, or both?

  • Time Machine crashes whenever the computer goes to sleep or into screen saver mode.

    Apologies if there is an obvious answer or post about this.  Every time I try to initialize Time Machine, it will begin backing up until the computer goes to sleep or the screen saver kicks in.  When I wake the computer up, I get a message that says "The backup was not performed because an error occurred while copying files to the backup disk."  The message also tells me that the problem might be temporary and to try Disk Utility to repair the backup disk if the problem persists.
    When I run Disk Utility, I am told that the volume cannot be repaired and that it needs to be reformatted.  I reformat the disk, try to run Time Machine again, and get the same problem whenever the computer goes to sleep or into screen saver mode.  Lather, rinse, repeat.
    I managed to get an initial backup only if I turned off the screen saver and the sleep function.  However, once I turned them back on, I ran into the same problem when Time Machine tried to update the backup.
    I am running OS X v.10.6.8 on an iMac5,1.  The backup is a Toshiba 1TB USB external HD. I saw this same problem posted in the Lion forum (and I cribbed the title of this post from there).  Nobody has offered a solution yet, but it was a very recent post.
    Thanks in advance.

    Oh yeah I forgot to say I use an ETHERNET connection.

  • System preferences freezes whenever try to change screen saver settings

    When I try to change the screen saver settings in the system preferences, it locks up and I have to force quit. Is this a graphics issue? Anyone else having this issue? It looks like my computer is having problems processing the screen saver previews. I have the new Macbook Pro Unibody (June 2009).
    Any help would be awesome, thanks!

    Edit/add to the above: I just realised that the iLife Support update had (supposedly) already been installed -- it's listed in the updates in the system preferences, but not with today's date (which fixed the issue), but with the date when I got the MBP. Strange. A bug in the update? Not installed completely? Didn't get any error messages though. Anyway, all's well now

  • HT1338 whenever I access my screen saver my computer freezes. Trying to change my background picture.

    Hey, I am trying to change my background picture but everytime I try my computer freezes.What do I need to do, help.
    Thanks in advance!

    I just did a little test and changed something in my Screen Saver settings and looked to see what changed (just had a Finder window open in my ~/Library/Preferences and had the "Date Modified" column selected so that the most recent change would appear at the top) and noticed that the file called com.apple.screensaver.xxxx.plist file changed (the xxxx is a hex number that is part of your UUID, or perhaps the whole UUID, as have seen it both ways). This screensaver preferences file is located in ~/Library/Preferences/ByHost which makes sense, as every user would need their own set of screen saver preferences on each host.
    Looking at this file in TextWrangler it looks like this:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>askForPassword</key>
    <integer>0</integer>
    <key>idleTime</key>
    <integer>300</integer>
    <key>lastNonRandomModuleName</key>
    <string>Flurry</string>
    <key>moduleName</key>
    <string>Flurry</string>
    <key>modulePath</key>
    <string>/System/Library/Screen Savers/Flurry.saver</string>
    <key>tokenRemovalAction</key>
    <integer>0</integer>
    </dict>
    </plist>
    Hope that helps.
    One thing I did have a question about is how to find the UUID. On a Mac Pro system the command:
    system_profiler | grep -i uuid
    returned the expected number that was part of the com.apple.screensaver.xxxx.plist file, but this did not work on a MacBook Pro. No luck trying to find out why so far. Anyone have any ideas? There is also a UUID associated with a disk volume, that appears to have nothing to do with the UUID associated with the system. So the UUID I'm talking about here is for the system, not a disk.
    -Bob

  • When trying to change screen saver computer locks up

    when I go to desktop/screen saver and click slide show it's goes into the loading mode with the rainbow ball turning the only way to stop it is go to the activity monitor where I find a system preferences (not responding) error and have to click it to stop process any ideas how to get my screen saver to start responding?

    What Mac OS version are you running and what processor type is in your computer?
    You can find both by clicking the Apple icon at the left end of the menubar and selecting "About this Mac" from the menu that appears. The info I requested will be in the About ths Mac window:
    The two lines I've indicated with red arrrows will tell us a lot about your iMac.

  • IMac G5 freezes or locks up in Screen Save Mode

    After about 5 minutes in the screen saver mode my iMac G5 locks up and will not go to the password menu. The fans turn on the only way to get out of this is to power down. I have tried to force quit but the keyboard locks out too. I am running the Apple screen saver the beach scene one. The only thing I have changed is when the screen saver comes on. I have 95 gigs open on my hard drive too.
    Any thoughts? Thanks

    Hopefully all that you need is to perform disk repair (not permissions) using the Disk Utility version located on your grey-label Install Disc 1, once you have booted from that disc.
    Insert the disc into your optical drive and immediately choose "Restart" from your blue apple menu. Upon hearing the startup chord, immediately press and hold the "c" key until you see the progress indicator. First install screen is language selection, second install screen at the top of the display you see pull-downs, one of which is Utilities. Select Disk Utility, from the drives listed on the left, choose the entire internal hard drive which should be the first listed. On the right verify you're on First Aid panel, then click "Repair Disk" button and allow to run until completion. Re-run if necessary until it reports "No repairs necessary"
    Quit Disk Utility, Quit installation sequence, restart to usual startup disk.
    Please note that your HDD is now over 80 percent full, and many believe that beyond that point you might start to see the iMac's operating efficiency steadily deteriorate. [click the iMac G5 link, search "swap space" or "defrag"] You might want to consider adding an external firewire/usb hard drive for additional storage, but certainly get something for backing up. There is probably a little on your current HDD that you would rather not lose:) This is the time to protect yourself.

  • Vi Freezes upon Trying to Edit or Select

    I am trying to edit a VI. Upon trying to delete or select a command with I/O Assistant 1 (the first write command) the computer freezes. Everytime I try to delete this command or commands below it the computer freezes. It seems to be a software bug. I have tried deleting the I/O Assistant and starting from scratch but I don't have enough skill yet in VI writing to do this. Any help would be appreciated. 
    Nevica
    Message Edited by nevica on 07-30-2009 05:53 AM
    Message Edited by nevica on 07-30-2009 05:53 AM
    Solved!
    Go to Solution.
    Attachments:
    Baratron2.7.1.vi ‏482 KB

    check this
    Attachments:
    Untitled 2.vi ‏214 KB

  • I attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded, now computer freezes after trying to load everything.  possible to reverse this?  options?  restore hd from time machine?  pls help!!!

    long story short...i attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded to my desktop and now my computer freezes up after trying to load everything, and i'm not able to just drag the photos into the folder.  is it possible to reverse this?  what are my options?  restore hd from time machine?  
    a further question to restoring my hd from a previous backup on time machine...it says it will erase the hd.  does it actually erase everything or does it just erase anything that may have been added or downloaded since that backup?  this is confusing to me.
    another problem which is part of the original problem is it seems that when i connect my iphone to my computer and iphoto uploads my pics...it doesn't just upload new ones, it duplicates and uploads every picture again...which is why i have 45,000 pics...they are 40,000 duplicates!  what's up with that? 
    I have a macbook pro, and recently updated the os to Yosemite.  the iphoto app is out of date, but i'll worry about that once i can figure out how to get all those pics off the desktop.  also, i recently purchased and installed 8g of new ram, but that hasn't seemed to help. 
    any advice would be appreciated! 
    thanks!!

    thanks for replying. 
    the booting and walking away and then attempting to browse and clean method is what i've been trying to do.  it won't let me drag and drop and just freezes up and goes to sleep after 2 minutes.  it's a never ending battle with very few results. which is why i questioned the method of just restoring the hd from a time machine backup.
    do you think restoring the hd from time machine will resolve the issue with all pics on the desktop?  and everything will be as it was from the date i restore it from?  sorry, as you can tell, i'm not overly computer savvy. 
    i have a really old desktop mac...i can try connecting the two...how does one boot a mac in 'target mode'? 
    as for the iphoto cleaning and organizing issue...that is what i was trying to accomplish with importing them to a folder.  was going to browse and clean from there...but somehow imported to desktop which is what's complicating everything.  once i get them off the desktop i can work on the iphoto issue...which as i mentioned...i didn't take 45,000 pics...i've just taken about 4,500 over the last few years, and they are being duplicated in iphoto.  this was my attempt to clean it out entirely and start over.  it will basically be a lot of deleting.
    one problem, seems to lead me to more...which is just my luck.  :-) 
    thanks again, for your help.

  • My computer freezes on the HP logo screen can someone help me fix? (details inside)

    ok so i wiped my Drive clean because it had some nasty malware on it. i had some stuff backed up on a different drive which i installed an operating system on. after i wiped the first drive clean and tried to boot up the system it wouldnt boot anymore. after installing a portable OS on a flash drive i was able to get the computer to load up and i checked and reallocated the drive that was wiped so it could be used again. then i put in my system recovery disks in to install vista back on to the drive but during the recovery my computer got the blue screen. since then i cant do anything with my computer i have tried changing drives and using the USB to run an OS but it wont work it always gets stuck at the HP logo screen. is there any way to fix this?

    Hi,
    First try to boot up without connecting the USB device. Remove any type of external storage devices if connected and check..
    If that doesnt help you can follow the steps from the link below and check if it helps..
    Computer Does Not Start (Windows Vista)  
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • Computer freezes when trying to sync ipod touch

    I recently upgraded my laptop to Windows 7 64 bit and I'm not sure if I had this problem. I have the 64 bit version of itunes downloaded and I got a new 32gb ipod touch for christmas today. I plugged it in and set it all up and when it goes to sync, it shows that it gets to the 5th song out of like 500? songs I have and my whole computer freezes. I have my itunes setup so that it gets my songs from my external hard drive. I don't know if that would be a problem by trying to send my songs from my hard drive to my computer and then to my ipod. Any ideas would be appreciated. Thanks.

    i am having some success with my touch now by right clicking on the itunes icon and selecting, troubleshoot compatibility, troubleshoot program, program worked on earlier versions,then select, win vista service pack2. this is probably not a permenant fix but for the time being it seems to work. hope you have some joy with your setup. JF

  • Movie is playing from my computer and sound is there but screen saver is up with no picture

    Trying to stream from my Mac to Apple TV and the sound is going to speakers but screen saver is all I get....help

    More information, please:
    Was it working and then stopped, or has it never worked for you with this iMac and this Apple TV?
    What vintage iMac are you using?
    What version of Mac OS X are you running? Your profile says 10.0.x, but that's really, really old.
    What version of iTunes are you running?
    What version of Apple TV do you have, and what version of its software is it running?
    Are you using AirPlay inside iTunes, or the system-wide AirPlay?

  • Hot Corners do not seem to put Mac to sleep or activate screen saver

    All was been working fine and as expected on my Macbook until the 10.6.2 update. I have left hot corner set as screen saver, and right hot corner set to sleep the display. When I go to the hot corners, sleep or screen saver is activated, but then I walk away and a few minutes later the screen comes on again...
    At first I thought this was just my macbook (nothing was running but email and no external devices attached), but then It started doing this to my MacPro after the last update...exact same thing.. Then it started happening to my work iMac, then my daughters iMac and now my sons iMac. The only machine that doesn't seem to be effected is my wifes MacMini - and she is still running 10.6.1.
    Does anyone know if there is an update somewhere, or how to fix this issue?
    thanks

    I would not regard myself as expert and you are going to get opinions for both approaches. I have just passed on a 3 year-old MacBook Pro that has never been off, apart from updating when restarts are required. Similarly, my iMac sleeps (protected by UPS) and is not turned off. I am happy this way.
    I would take slight exception to your process, however. In my opinion, I put the MacBook Pro to sleep by using OptionCommandDelete (or the Apple menu) and wait until the power light pulses before closing the lid.

  • Computer freezez while trying to import

    Just today my computer is starting to freeze when I import songs from a CD using iTunes. I tried to run the CD diagnostic and it freezes it up during that as well. It was working perfectly fine and now it doesn't. I tried ripping from the same CD drive using Windows Media Player and it worked totally fine. I even checked the box in preferences that says: use error correction (under the import tab) and that doesn't even work. I'm really very frustrated because my computer never freezes up, ever. Until now. I can't even do anything I have to manually reset the computer.

    I have the same problem. I have only just upgraded to an 80G iPod, it worked for a few weeks and now can't import any CDs (stopped working just over a week ago). I've removed the iTunes software (and QuickTime) and reinstalled, I've tried using an external USB CD drive in place of my internal drive and get the same symptoms. iTunes takes over a minute to open but appears OK. When I insert a CD the drive spins, I get the automatic pop up asking what I want to do with the CD and regardless of whether I close this window or choose import using iTunes, iTunes freezes. I originally suspected the Matshita drive but the external drive (Iomega Super DVD) has the same problem. The diagnostics don't work either unless I start them and then immediately insert the CD (see below). Is there anyone in Apple that can help with this? My iPod is now useless.
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Hewlett-Packard HP Compaq nc6120 (PY508ET#ABU)
    iTunes 7.2.0.35
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), DRVMCDB (1.0.0.1), SSCDBHK5 (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
    Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
    Connected Device Information:
    DiskDrive, FUJITSU MHV2080AH, Bus Type ATA, Bus Address [0,0]
    CDROM, MATSHITA UJ-840D, Bus Type ATA, Bus Address [1,0]
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: MATSHITA UJ-840D, Rev 1.02
    Audio CD in drive.
    Found 18 songs on CD, playing time 75:59 on Audio CD.
    Track 1, start time 00:02:32
    Track 2, start time 05:33:37
    Track 3, start time 09:34:02
    Track 4, start time 13:38:10
    Track 5, start time 19:09:20
    Track 6, start time 23:21:72
    Track 7, start time 26:42:32
    Track 8, start time 31:01:52
    Track 9, start time 35:07:05
    Track 10, start time 39:03:17
    Track 11, start time 44:44:20
    Track 12, start time 48:25:52
    Track 13, start time 52:06:70
    Track 14, start time 55:13:40
    Track 15, start time 58:34:60
    Track 16, start time 62:55:47
    Track 17, start time 66:45:20
    Track 18, start time 71:32:67
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12 16 24.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    Thanks
    Compaq nc6120 laptop   Windows XP Pro  

  • Computer freezes upon playing itunes with other programs open!!!

    When I run itunes with only a few other programs open, such as internet explorer, my computer completely freezes and will not even allow the ctrl/alt/delete shutdown. This problem also occurs when I have been running itunes by itself for a few songs. My itunes library is about 13Gb in size and is organized by itunes (i.e. through the preferences option) in ACC format. My computer is fully cabable of handling the requirements of this program - or so I thought - with an 80Gb hard drive and 512RAM. My suspicion from looking at the task manager, however, is that itunes is a RAM hog taking up an average memory usage of 40,000 to 45,000 K. My computer is not at all prone to freezing and operates like a dream without itunes running. For starters, how do I fix this problem so that I might keep itunes? Some additional logistics of my problem are listed below and I hope they are of help in solving this problem, but I partially suspect that this issue stems from my large quantity of songs organized by itunes because it didn't freeze when my music file size was smaller (i.e. 4Gb) Thanks.
    -I have tried uninstalling and reinstalling Quicktime.
    -I have tried msconfig, but too many possibilities present themselves for a potential program inhibitor.
    -Firewall and Antivirus software by symmantec.
    -Have Divx, but doubt this to be the problem because it was installed after.
    -Have been getting very depressed that this is such a problem.
    -I don't want to lose itunes, but am running out of options.

    iTUnes, in basic terms, does not play nice with the "Fast user switching" feature in windows turned on. THis feature (If memory serves me right) is automaticly turned on in windows when you create another user account. to turn it off, goto control panel>user accounts>change the way users log on and off.
    Afew aricals about iTUnes and fast user switching can be found here http://search.info.apple.com/?search=Go&lr=lang_en&kword=kipod%20OR%20kipodwin%2 0OR%20kitunes%20OR%20kituneswin&type=ktechORklearn&newstype=&q=Fast%20user%20switching

Maybe you are looking for

  • Since upgrading to Mountain Lion 10.8.2, I can no longer print head shot photos from CONTACTS.  Please assist.

    Before upgrading to Mountain Lion, I was able to print head shots - in ALPHABETICAL order, mind you - from Contacts.  Why do we not have this feature any more?  Please bring back the way it was!  Thank you! Issue printing from Contacts: can't print h

  • How can I create a function of sound volue from time using AudioQueueBufferRef??

    I have a question how can I analyze class AudioQueueBufferRef, for creating a function of sound volue from time?? Here is what I get . there is AudioQueueBufferRef fillBuf = audioQueueBuffer[fillBufferIndex]; volume height is 2000 elements from SInt1

  • Best camera for Cisco Video Advantage

    Hi, I am looking for a camera which is having the best specifications for Video advantage. It looks like the Microsoft LifeCam NX-6000 is the one. (1600 x 1190 with 30 fps) Does anyone have experience with this camera or who has good experience with

  • Nokia 6080 and DKU 5

    Hi everyone, I have a Nokia 6080 and i bought a new DKU-5 Data Cable, I downloaded the latest nokia pc suite from nokia website., and the DKU cable driver from the Nokia Site., when I run Pc suite according to the steps it says connect your data cabl

  • Does "aaa accounting commands" not support radius?

    When I issue this command: aaa accounting commands 15 default start-stop group myradiusgroup I get this error: %AAAA-4-SERVNOTACPLUS: The server-group "myradiusgroup" is not a tacacs+ server group. Please define "myradiusgroup" as a tacacs+ server gr