Computer freezes when trying to reload the OS from the HP recovery disks.

I have an HP Media Center m8300f desktop pc. My hard drive crash and I had to replace it. Since the recovery software was on the hard drive I had to order the recovery disks from HP. Have checked with HP and they are the correct disks for my system. The problem that I am having is this...during the recovery process everything loads from the 2 disks...the next step is to reboot the computer to complete the recovery process. During this part of the process the program is apparently creating the recovery partition on the new hard drive. The screen goes to the icons of files moving from one folder to the other so I'm assuming that it has created the partition and is dowloading the files for the recovery partition. During the process, it just locks up and halts. If i reboot the computer it says the BOOTMGR is missing and will not load windows. I've gone through the process many times and it continually halts at the same point in the process. Any ideas on whats going on and how to get past it?

i am having some success with my touch now by right clicking on the itunes icon and selecting, troubleshoot compatibility, troubleshoot program, program worked on earlier versions,then select, win vista service pack2. this is probably not a permenant fix but for the time being it seems to work. hope you have some joy with your setup. JF

Similar Messages

My creative CC for teams gives an error code (-60) download corrupted when trying to install any app from the CC on my desktop. Any help?

My creative CC for teams gives an error code (-60) download corrupted when trying to install any app from the CC on my desktop. Any help?

Rasco1 it sounds like your managed network needs to be configured to allow you to download successfully. You can find more details in Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

Getting a 1809 error when trying to remote control PC from the Console.

This is message i get when trying to remote view or remote control PC.....
1809: An error has occurred while generating a session key for
encryption.The remote session cannot be initiated. Contact Novell
Techical Services and specify this code.

This is for a 1807 error. My error is and 1809 error. Is there somewhere
else to research on a 1809 error when trying to remote control PC from
the Console?
> Perhaps.................
>
> http://support.novell.com/techcenter/search/search.do?
cmd=displayKC&docType=kc&externalId=10094808html&s liceId=&dialogID=2356487
>
> --
> Craig Wilson
> Novell Product Support Forum Sysop
> Master CNE, MCSE 2003, CCNA
>
> Editor - http://www.ithowto.com
>
> (Seeking Full-Time Expert? Drop me a note :> )
> <[email protected]> wrote in message
> news:09i_e.2044$[email protected]..
> > This is message i get when trying to remote view or remote control
PC.....
> >
> >
> > 1809: An error has occurred while generating a session key for
> > encryption.The remote session cannot be initiated. Contact Novell
> > Techical Services and specify this code.
>
>

I have an iPhone 4S I've been useing a sever for awhile now. Downloaded new iOS now I'm getting 403 forbidden when trying to look up anything from the server. Regular 3G works. How can I fix so I can use the server?

I have an iPhone 4S I've been useing a sever for awhile now. Downloaded new iOS now I'm getting 403 forbidden when trying to look up anything from the server. Regular 3G works. How can I fix so I can use the server?

Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.

Computer freezes when trying to sync ipod touch

I recently upgraded my laptop to Windows 7 64 bit and I'm not sure if I had this problem. I have the 64 bit version of itunes downloaded and I got a new 32gb ipod touch for christmas today. I plugged it in and set it all up and when it goes to sync, it shows that it gets to the 5th song out of like 500? songs I have and my whole computer freezes. I have my itunes setup so that it gets my songs from my external hard drive. I don't know if that would be a problem by trying to send my songs from my hard drive to my computer and then to my ipod. Any ideas would be appreciated. Thanks.

i am having some success with my touch now by right clicking on the itunes icon and selecting, troubleshoot compatibility, troubleshoot program, program worked on earlier versions,then select, win vista service pack2. this is probably not a permenant fix but for the time being it seems to work. hope you have some joy with your setup. JF

Zen Micro freezed when syncing, now freezes when trying to reload or upgrade firmw

Got a Zen Micro, firmware 2..02
I started having problems syncing with my home PC, which uses XP SP2 with Windows Media Player . Trying to sync resulted in a freezed WMP an, after a while returned an error saying it couldn't communicate with Zen Micro or just showed that all the files to be transfer had been stopped.
Tried to sync in my office, XP SP2 with with Windows Media Player 0. It worked a bit better: could transfer files, but the speed of the transfers was unusually slow for USB 2.0. It ended with the WMP freezed and, after a while, all the files I use for testing where in the player.
In both computers, when the WMP freezed, the signal in the player remained with the lines in black, as if it was still communicating. I had to disconnected the player, disregarding the signal, which remained even with the player disconnected from the PC. When powered up the startup process ended in the "Creative" screen staying on forever, I had to remove the battery, go to recovery mode, Reboot the player and, after a library rebuilding it worked.
Read some threads and thoght that reloading the firmware would help. But the sign "erasing firmware" doesn't dissapear in my player's screen. I gave up after 2 hours. At that point, my player starting showing a "firmware error" at startup and going to the recovery screen every time it is powered up.
Tried to upgrade firmware. It gave a "player not connected" error using my home PC (WMP ) but not in my office (WMP 0). I try to "re-upgrade" to 2..02 but it returned a "failed to upgrade firmware" error (after a few minutes with the window freezed) and the player remained in "communicating" status (black lines in the screen's icon). Try then to "downgrade" to last .xx firmware version available, but the operation hangs after the "format completed successfully" message, with only two bars in the progress indicator, and it stays like this for a very long time (tried for 30 minutes), still with the communication black-lines-in-icon status.
If I try to re-run the firmware upgrade inmediately, it says "your player is not connected, please reconnect your player", as it is still in "communicating" status. I have to take battery out and reinsert it to be able to restart the firmware proess.
Any suggestions? I'm really restricted to not to send the player to Creative Customer Service, as it has just finished it warranty period and I'm nowadays in Argentina, from where the post cost would be huge.
Message Edited by raft on <SPAN class=date_text>08-4-2006 <SPAN class=time_text>04:30 PM
Message Edited by raft on 08-4-2006 05:47 PM

Anyone from the Creative board or the guru around has an idea of what can I do?
would be really appreciated.

Computer freezes when inserting a USB Bus Card into the slot.

I use this card as a way to capture video in FCE. I also have 2 external HD's which I use a scratch disks. I have used this configuration in the past and it has worked properly, however now, when I insert my USB card into the slot the computer freezes, has to be shut down, and I get this error message.
Can anyone tell me what's up? Thanks from Korea!!!
Daryn
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000014 PC=0x000000000048EE94
Latest crash info for cpu 0:
Exception state (sv=0x4263AA00)
PC=0x0048EE94; MSR=0x00009030; DAR=0x00000014; DSISR=0x42000000; LR=0x0048EE84; R1=0x2C623B20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0048EE84 0x0048ED44 0x00463C94 0x0048E550 0x002C0CE0 0x002C0AA8
0x002C1510 0x002C1B1C 0x000A9514
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBOHCI(2.5.5)@0x48d000
dependency: com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x483000
com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
Proceeding back via exception chain:
Exception state (sv=0x4263AA00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x42429280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
Proceeding back via exception chain:
Exception state (sv=0x4263AA00)
PC=0x0048EE94; MSR=0x00009030; DAR=0x00000014; DSISR=0x42000000; LR=0x0048EE84; R1=0x2C623B20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0048EE84 0x0048ED44 0x00463C94 0x0048E550 0x002C0CE0 0x002C0AA8
0x002C1510 0x002C1B1C 0x000A9514
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBOHCI(2.5.5)@0x48d000
dependency: com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x483000
com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
Exception state (sv=0x42429280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPCModel: PowerBook5,5, BootROM 4.8.6f0, 1 processors, PowerPC G4 (1.1), 1.5 GHz, 2 GB
Graphics: ATI Mobility Radeon 9700, ATY,RV360M11, AGP, 128 MB
Memory Module: SODIMM0/J20STANDARD, 1 GB, DDR SDRAM, PC2700U-25330
Memory Module: SODIMM1/J23REVERSED, 1 GB, DDR SDRAM, PC2700U-25330
AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
Modem: LastDash, UCJ, V.92, 4.0, APPLE VERSION 2.6.6
Bluetooth: Version 1.7.14f14, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
Parallel ATA Device: MATSHITADVD-R UJ-825, 565.88 MB
Parallel ATA Device: Hitachi HTS541080G9AT00, 74.53 GB
USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
USB Device: Kensington PocketMouse Pro, Kensington, Up to 1.5 Mb/sec, 500 mA
FireWire Device: 1394 Storage Front Panel*, Maxtor, Up to 800 Mb/sec
FireWire Device: LaCie d2 Extreme LUN 0, LaCie Group SA, Up to 400 Mb/sec
Powerbook G4 Mac OS X (10.4.9)

Bad card

Why does photoshop elements 12 freeze when trying to save an image for the web?

Everytime I try to save an animated GIF image for the web the whole application freezes and I have to force quit. The file sizes are small. Can someone help me with this issue?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Crashes while trying to reload Snow Leopard from the disc.

I am trying to reload Snow Leopard onto a MacBook Pro. It crashes every time I attempt it. When starting up without the disc, I get a folder with a question mark. What is wrong? When attempting to start up using the Snow Leopard disc, it crashes.
Any suggestions?

The folder on the question mark is the firmware telling you it can't the bootable volume it was told to boot from.
It might not know, or it's gone or the drive is dead or some other issue it can't find it.
Hold the option/alt key down on a wired or built in keyboard and boot the machine into Startup Manager, there you can select from the bootable options if they exist or not corrupted.
Also the disk can be inserted and booted (and ejected) from here as well.
If after booting from the disk it crashes, the disk is likely bad or not compatible with that machine.
How to erase and install Snow Leopard 10.6
Reset your Mac
How to revert your Mac to Snow Leopard

ITunes store keeps saying that my session has timed out when trying to buy a product from the store

I Tunes is telling me that my session has timed out when trying to buy a gift voucher, which i have done many times before.
The most recent change i'v made to my computer before this happened was to download an update (MacOSX updatecombo 10.7.3dmg)
a couple of weeks ago. I'v turned off the firewall as suggested whilst trying to transact and turned it back on again, but don't know
what else to try. The problem is three days old as i left and came back to it to see if there might be a glitch in the system.
I'v been able to access the credit i have in the store, but not buy the itunes voucher to email to my own a/c. Please help someone if you can
Sandystone.

Thanks for your suggestion Ned01, I tried this as a last ditch attempt, unfortunatly it made no difference in my case, but i'm pleased it did for you. However, because you reminded me to have another go at this problem, i tried something else (which i'd unsucsessfuly tried before), that is, i deleted the 'CLICK & SAVE " a/c i'd set up recently, and reverted to my previous payment me and would you know it , this time it worked !! I set up a trail purchase and it worked.
It seems to me that other poeple with this problem have to solve it by trail and error, but thank you for your help.Sandystone..

New version of Firefox is hanging when trying to play a file from the BBC iPlayer

When trying to click on the 'Play' button on the BBC iPlayer site http://www.bbc.co.uk/iplayer/radio/categories/drama, Firefox hangs and does not allow me to click on anything else on any of the open tabs.
If I use the task master to close Firefox and then try to reopen it, I get a message saying that it is already open. Only restarting the computer will allow me to start it again.

do some working around, remove the old version, download the latest version from mozilla official, and do the new install, and install the addons. update problems are more than you can think over, so just do a new complete for sure. update sometimes is really time wasting......

HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps. It also has stop work when trying to down load new Apps. Any suggestions out their???

For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???

I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

Why do I keep getting an unknown error when trying to download an app from the app store on my iPod touch 4th generation when I put in the correct password?

I keep getting the same unknown error has occurred when trying to download an app what is wrong?

as an example.. from the sprint forum for a different device (unsure what device.. it's just not an iphone since no iphone or ios device has these settings -- ive seen this advice several times and I believe it's some form of android.. but not sure)
advice from the carrier advisor --
"Clear data in the Dialer and Dialer storage.... under manage Applications> All.
That is Settings - Applications - Choose All to view All choices - then find Dialer and clear the Data. Repeat this for the Dialer Storage as well. I personally also deleted the message thread first from the text message window and my log history which is a menu item from your call screen."
and another for you from a customer -- it is sprint again.. but this time a Samsung Epic
"OMG ... if someone can't tell me how to fix this "9230: Message sent using invalid number of digits..." error, I'm going to scream. My husband and I both have Sprint Epic phones and love them EXCEPT for this one problem! Help!"
Maybe they should sue Samsung?

I keep getting "hash mismatch" when trying to download Mountain Lion from the App store

I've been trying to download the new Mountain Lion from the App Store & keep getting "hash mismatch" message. I was able to download on my 1 computer, but no luck on the 2nd computer, which is up-to-date on all updates & software. Support even put a fresh copy of the App in my account & I still get that same message. Someone suggested AppCleaner, but how do you delete the OS to re-install the new. Didn't think that was possible. Any suggestions - I've tried quitting & logging out of the App Store & even re-starting (several times)

- Temporarily disable anti virus software if installed.
- Apps such as Little Snitch, Net Nanny, and Hands Off can prevent apps from downloading including Mountain Lion.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select Mountain Lion. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.

Error when trying to run a procedure from the .xsql file

Here is the error message pasted below.
- <test>
- <xsql-error action="xsql:include-owa">
<statement>declare buf htp.htbuf_arr; param_names owa.vc_arr; param_values owa.vc_arr; rows integer := 32767; outclob CLOB;begin param_names(1) := 'HTTP_COOKIE'; param_values(1) := ''; param_names(2) := 'SERVER_NAME'; param_values(2) := 'shanthi.ijs.com'; param_names(3) := 'SERVER_PORT'; param_values(3) := '8080'; param_names(4) := 'SCRIPT_NAME'; param_values(4) := '/xsql/test/myex.xsql'; param_names(5) := 'PATH_INFO'; param_values(5) := ''; param_names(6) := 'HTTP_USER_AGENT'; param_values(6) := 'Mozilla/4.0 (compatible; MSIE 5.0; Windows NT; DigExt)'; owa.init_cgi_env(6,param_names,param_values); scott.get_date; owa.get_page(buf,rows); dbms_lob.createtemporary(outclob,true,dbms_lob.session); for i in 1..rows loop dbms_lob.writeappend(outclob,length(buf(i)),buf(i)); end loop; ? := outclob; ? := DBMS_LOB.INSTR(outclob,CHR(10)| |CHR(10));end;</statement>
<message>ORA-06550: line 3, column 75: PLS-00302: component 'SESSION' must be declared ORA-06550: line 3, column 28: PL/SQL: Statement ignored ORA-06550: line 3, column 120: PLS-00302: component 'WRITEAPPEND' must be declared ORA-06550: line 3, column 111: PL/SQL: Statement ignored</message>
</xsql-error>
<xsql-error action="xsql:include-owa" />
</test>
My .xsql file is:
<test connection="system" xmlns:xsql="urn:oracle-xsql">
<xsql:include-owa>
scott.get_date;
</xsql:include-owa>
</test>
Any help in this regard is greatly appreciated.
Shanthi
null

I tried this way:
<?xml version="1.0"?>
<datapage connection="system" xmlns:xsql="urn:oracle-xsql">
<xsql:dml>
begin
get_rec;
end;
</xsql:dml>
</datapage>
Here it doesn't give any error, Why is it that it works here but not with <xsql:include-owa>, ofcourse I need to get a proper output from the procedure yet. Looks like the procedure doesn't support "out" variable, should I specifically use a function ?
Anyhelp will be appreciated.
Shanthi

Computer freezes when trying to reload the OS from the HP recovery disks.

Similar Messages

Maybe you are looking for