Computer freezes while installing sound dri

while i am installing sound driver for my audigy 2ZS, the installation blocks and pc freezes.
when i reser the pc, the pc does respond when windows has finished loading.
What could be the problem?
I disable my onboard sound device.
In safe mode everything seems ok, the creative driver is enable and in good working order.
Pls Heip

Hi Jake,
Your OS. Update.

Similar Messages

Computer freezes while updating security.

Hello again. My computer's problems have only intensified. Originally my computer would only freeze while multi-tasking or under heavy graphic stress. Now, the computer freezes while preforming mundane tasks such as moving a window. It's branched into other problems.
I cannot complete the download of the new security update. My computer freezes mid-download, regardless if I'm doing anything else or not.
My computer is even freezing while loading itself up. I have been told previously that my computer has a video-card issue and that the card was integrated into the computer. Now, I'm not so sure that is the problem. These freezes and glitches started some time after I performed a virus and spyware scan. I think that the scan may have corrupted a file during it's search.
Thanks in advance.

Hello again. My computer's problems have only
intensified. Originally my computer would only
freeze while multi-tasking or under heavy graphic
stress. Now, the computer freezes while preforming
mundane tasks such as moving a window. It's branched
into other problems.
I cannot complete the download of the new security
update. My computer freezes mid-download, regardless
if I'm doing anything else or not.
My computer is even freezing while loading itself up.
I have been told previously that my computer has a
video-card issue and that the card was integrated
into the computer. Now, I'm not so sure that is the
problem. These freezes and glitches started some
time after I performed a virus and spyware scan. I
think that the scan may have corrupted a file during
it's search.
Thanks in advance.
I had the same problem. It was finished with the update and when I pressed the restart button, it was ready to restart, then I got the blue screen with that loading image that goes round in a circle. I waited like 5-10 min and by the time that happened the screen was blank, but it still made noise that the computer was still running. So I did the cold shut down and restarted it.

Freeze while installing Photoshop CS 5

I've been trying, unsuccessfully, to install Photoshop Extended on my MacBook. Things to consider:
Yes, I have the Java runtime installed
I've had photoshop in the past, including the trial for CS5. However, I uninstalled them weeks before trying to install the retail copy
I suspect that it's having trouble writing files. It will often freeze while installing fonts, or when installing the actual application for Photoshop.
The installer used to quit, but after I cleared a number of system adobe files, it will not quit, and the instalation process will go further. However, between 50% and 80%, the installer will lock up, and my Mac will lock up, forcing me to shut down by holding the power button.
Has anyone else had similar issues installing photoshop in Mac OS (Specifically Lion)?
Thanks!

I've been trying, unsuccessfully, to install Photoshop Extended on my MacBook. Things to consider:
Yes, I have the Java runtime installed
I've had photoshop in the past, including the trial for CS5. However, I uninstalled them weeks before trying to install the retail copy
I suspect that it's having trouble writing files. It will often freeze while installing fonts, or when installing the actual application for Photoshop.
The installer used to quit, but after I cleared a number of system adobe files, it will not quit, and the instalation process will go further. However, between 50% and 80%, the installer will lock up, and my Mac will lock up, forcing me to shut down by holding the power button.
Has anyone else had similar issues installing photoshop in Mac OS (Specifically Lion)?
Thanks!

Computer freezes while ordering CC

Screen says not to go back or reload while submitting payment, but it's been running for 15 minutes. Any ideas? Should I go back or reload?

Hello again. My computer's problems have only
intensified. Originally my computer would only
freeze while multi-tasking or under heavy graphic
stress. Now, the computer freezes while preforming
mundane tasks such as moving a window. It's branched
into other problems.
I cannot complete the download of the new security
update. My computer freezes mid-download, regardless
if I'm doing anything else or not.
My computer is even freezing while loading itself up.
I have been told previously that my computer has a
video-card issue and that the card was integrated
into the computer. Now, I'm not so sure that is the
problem. These freezes and glitches started some
time after I performed a virus and spyware scan. I
think that the scan may have corrupted a file during
it's search.
Thanks in advance.
I had the same problem. It was finished with the update and when I pressed the restart button, it was ready to restart, then I got the blue screen with that loading image that goes round in a circle. I waited like 5-10 min and by the time that happened the screen was blank, but it still made noise that the computer was still running. So I did the cold shut down and restarted it.

Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
Specs;
Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
Processor - Intel Core i7 Processor - i7-3820 LGA 2011
Processor fan - Intel Thermal Solution RTS2011 AC
RAM - Ballistix by Crucial - 2x 8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
Power Supply - Cooler Master Extreme Power Plus 700W
Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
I have, as far as software goes...
Windows 7 64-bit SP1
Adobe Creative Suite 5, student version or what have you.
- I do have several plugins installed as well for After Effects only.
Autodesk 3ds Max 2012
-I have several maxscripts as well as a couple plugins for 3ds Max.
UDK 2-2012 & 3-2012
NVIDIA PhysX Lab 1.1
NVIDIA Texture Tools 2
NVIDIA plugin for Photoshop
xNormal
ConTEXT
UnCodeX
Quicktime
AVG Free
Malwarebytes
7-Zip
Java
Sculptris
As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
"Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

Computer freezes while running Endeca Tools Service

Hello,
We are facing a problem while running Endeca Tools Service with Experience Manager (v3.1.2 ) on Windows 7.
My computer freezes recurrently while the service is running. The same issue is happening to all of my colleagues who have installed the products.
Any help with this is much much appreciated.
Thanks.
Edem

For your question, you probably want the Endeca Experience Management forum (Endeca Experience Management).
Endeca Information Discovery is a different product.

Computer freezes while browsing the photos

It happened already few times that I was simply browsing the photos in Aperture and suddenly the computer (MBP Retina) has completely frozen and forced shut shut down had to follow. A bit strange ? (while database repair was done few times before, even database rebuilt). Something still not so good in the software ?

I have Nikk plugins but they are not used on those photos. This freezing, as I remember, started after Mavericks. I simply browse among photos (in the large view) and suddenly the cursor and the whole computer freeze (once in few days)
Plug-ins can be causing this, without being used, just by being installed, if they are incompatible.
Check the versions of your NIK plug-ins, if you have missed an update. In November the NIK collection has still been reported as incompatible with Mavericks, I am not sure, if that has changed.
Does a new Aperture library work? Create a test library and import a few images. Freezing might also be caused by having imported corrupted images or videos.

Computer Freezes while importing and converting music

I recently updated to Itunes 10.1.2, and now anytime I want to import a cd to my library or convert a non-aac format song into aac format, my computer freezes. Whats weird is my computer only freezes at 99.9 % importing/converting. i.e If I want to import a cd with 16 tracks, itunes will import the first 15 and then almost finish the 16th when my computer freezes. The first 15 songs are then added to my library and run properly upon restart of my computer but the 16th is not. Converting does the same thing even i convert only one song. I've tried re-installing, and downgrading to an older versions of itunes (9.2.1.5) and the same problem occurs. Any suggestions?

I am also having the same problem. Itunes freezes doesn't respond for awhile. Here is the diagnostic results:
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 1545
iTunes 10.1.2.17
QuickTime 7.6.9
FairPlay 1.10.24
Apple Application Support 1.4.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.3.1.3
Apple Mobile Device Driver 1.52.0.0
Bonjour 2.0.3.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number F42409179A08CE80
Current user is not an administrator.
The current local date and time is 2011-02-11 12:09:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.1.2.17 (x64) is currently running.
iTunesHelper 10.1.2.17 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: TSSTcorp DVD+-RW TS-L633B, Rev D400
Audio CD in drive.
Found 11 songs on CD, playing time 38:52 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:50:22
Track 3, start time 07:30:58
Track 4, start time 10:54:31
Track 5, start time 14:25:70
Track 6, start time 18:01:02
Track 7, start time 21:19:19
Track 8, start time 24:49:00
Track 9, start time 27:58:28
Track 10, start time 31:36:53
Track 11, start time 34:55:51
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 24.
The drive CDRW speeds are: 24.
The drive DVDR speeds are: 24.
The drive DVDRW speeds are: 24.

Computer freezes while transferring information

Hello - if anyone can help me I would very much appreciate it! I bought a new MacBook today and was using a 6-pin to 6-pin firewire cable to transfer files from my old computer (a Powerbook G4). It all started off fine and then seemed to freeze while transferring documents. The blue status bar was about 40% complete and the note at the bottom of the screen said "about 22 minutes remaining". Nothing was happening after about 45 minutes - so I hit "apple-Q" to see if I could reset it (probably a mistake!!), the rainbow spinning circle appeared for about 15 minutes, then went away, then I saw this: "Mac OS X has finished downloading, continue?" and so I clicked yes. That was about an hour ago and still I have the same frozen screen: Transferring documents, about 22 minutes remaining". HELP!!!
Thanks - Diane

Thanks. After canceling the transfer (by unplugging the firewire cord) there was an error code that showed the names of the files it had trouble with. After deleting them, I was able to star the process over.
It seems to have done the trick. Thanks for your help!

Fully Qualified Computer Name while Installing Sun One Directory Server

Hi All,
While Installing SunOne Directory Server 5.2, Im getting error i "Fully Qualified Computer Name"
Defualtly it is taking as myhostname.domain.com.
Any one help me how to proceed the installation .............
Thanks
Kumar
Edited by: 915734 on Jul 2, 2012 12:56 PM
Edited by: 915734 on Jul 6, 2012 9:54 AM
Edited by: 915734 on Jul 6, 2012 9:55 AM

hopefully, you have gone through the installation doc. before installation configure hostname/IP properly
check with this link and look at page no 21 for all the required information
http://docs.oracle.com/cd/E19850-01/816-6697-10/816-6697-10.pdf

Computer freezes while checking NVRAM

my keyboard doesn't work after the computer boots up. It's like my computer freezes right after it boots and where it asks if u wanna enter the set up screen or logo screen. If I press the tab button rapidly while the computer starts up, it goes to the logo screen and then freezes. On the boot up screen it displays my memory size correctly, my clockspeed incorrectly (1250mhz instead of the correct value), and the DRAM clock = 200, SDRAM CAS Latency = 2. It displays "CHECKING NVRAM" and freezes there.

Please read all these:
http://www.msi.com.tw/program/service/forum/index.php?threadid=1131&boardid=13&styleid=1
http://www.msi.com.tw/program/service/forum/index.php?threadid=6090&boardid=13&styleid=1
Your problem is one of the most common one - either CPU heatsink installation, PSU underpowered or RAM. The resolutions were addressed in the thread above.

Pacman randomly freezes while installing packages.

Whatever I do, I can't get xfce4 to install because every time computer freezes at different package installation. It was the same before I reformatted and the issue is not cpu/temperature-related.

Yeah, ram is fine, disk is checked.
Last edited by Lockheed (2010-06-14 17:12:32)

Help! computer stuck while installing automatic updates

Hi there, I'm having a problem while installing the automatic updates. I bought this iMac about 7 months ago and I've installed all the automatic updates without any problems, but since 2 weeks ago when the updated software asked me to restart my computer to install the new updates, the computer just got stuck after loging out when the INSTALLING UPDATES windows appears. It stayed there for about 6 hours (I thought it was like a really large update) but the process bar was still like in 1%. So I just pressed the ON/OFF button and restarted the computer.
Now I have 4 updates outstanding and everytime I tried to install them the same happens, the computer gets stuck in the installation window.
Does anyone here know what could be wrong and how to fix it? is there any way to delete the installations remaining and start right from scratch or something?
Please I need help! this is the first Mac I've ever had!
Thank you all.
Cheers,
German D Salamanca
<Edited by Moderator>

Hi German D. Salamanca;
You really should not post you email address in your thread. Addresses posted in this manner can be harvested for use with spam. If you wish to you can place your email address in your profile instead.
I am going to suggest to the monitors that they edit your message to remove the address.
Allan

Computer freezes while reading from serial port

My computer freezes when i tried to read from a serial port for a longer period of time such as 10 hours. I always close the serial port after reading. please, help me solve this problem

I too experienced a similar problem twice on my machine and I have no idea how to stop it because it is so intermittent and I cannot replicate it.
Perhaps I can offer some clues.
The Labview screen cannot be stopped and some parts of Windows appears frozen. Oddly enough I can switch to the block diagram but thats about all I can do. The LV stop button will indicate a mouse click on it but the VI does not stop. iT also cannot be closed.
Even the reset button and power button on the PC does not work. I am forced to power down the PC (pull the plug) to get back control.
I believe it is related to a visa call to my serial Balance.
ANyway no solution but hopefully some clues.
Dell Optiplex GX260 w/ 500MB RAM
Win2K 500.2195 w service pak 4,
NI
serial Hardware and NI serial ver1.45 (16 com ports)
Labview 6.1 and 7

Computer freezes while syncing

I am trying to sync my Touch to my laptop for the first time. At the top of my iTunes screen in states that it is optimizing photos and beneath that it states a number out of 3750. My entire computer freezes when it reaches 835 of 3750. I had to actually take the battery out of my laptop in order to unfreeze it and restart.
I've tried twice now to sync and it froze at the exact same spot both times.
What do I do?

Welcome to the discussions,
did you try to delete the photo cache folder? http://support.apple.com/kb/TS1314

Computer freezes while installing sound dri

Similar Messages

Maybe you are looking for