Computer freezing on install

Ive been having this problem since June. Whenever I go to install skype desktop version it starts installing and everything but then as soon as it starts to login and finish BAM. Everything freezes and i am forced to shut down everything and try again. Even now with the new skype it still freezes every single time. I wouldnt be writing this if it werent for the fact that Skype in the Store for Windows was recently closed and is now forcing users like me to download this.Cant download and talk to my loved ones anymore now :/ Help?

You have a few issues. One of them being with your wireless card crashing. I suggest you update that software to the latest. You can find the latest drivers here. I would suggest you upgrade the suite. If you still continute to have issues with wireless (if you notice it), try removing the suite software and replace it with the driver software only. Suite
http://downloadmirror.intel.com/25138/eng/Wireless_18.11.0_e164.exe Drivers only
http://downloadmirror.intel.com/25138/eng/Wireless_18.11.0_De164.exe It is also best that you update the drivers for both your video cards since they work in tandem. Currently your GeForce chip is updated but your Intel one is not. You can get the latest drivers for your Intel one here: http://downloadmirror.intel.com/24973/a08/win64_153336.zip If you are unable to run the setup due to it barking about incompatibility, you will need to force update the drivers using Device Manager by browsing to the driver folder in this package (ignoring any warnings).

Similar Messages

Computer freezes when installing bluetooth driver

Hi
I've bought a bluetooth USB dongle with toshiba bluetooth software. The installation freezes at the very end of the progress bar for installing the driver. I'm using Windows XP V. 5.1 SP2. Comm ports currently in use are 1,2,3,5 and one called "BT Port" (COM65) which may be blue tooth but may alternatively be something to do with BT broadband which is installed on the machine. In device manager "Network Adaptors" shows "Bluetooth Personal Area Network" and Bluetooth shows RFBNEP, RFBUS, RFCOMM, RFHID and Generic Bluetooth radio. The Bluetooth local COM utility in Control Panel shows no com ports in use. Any ideas?
Thanks
David

Hi - thanks for input. Have found and disabled sony ericsson software from my old phone which apparently included a bluetooth monitor on COM 500 (although there was no reference to this anywhere else!).
I removed them completely anyway. Still getting the same result however. Last thing to be reported during the install is "Bluetooth Audio Device (WDM)". The progress bar gets all the way to the end and then it freezes - can't use Task Manager or anything and I have to do a hard reset.
I'm installing Bluetooth USB Adapter V2.0 + EDR off the CD. The dongle is plugged into a USB hub (not into the back of the computer - I've run out of USB connections at the back since they are full of things that can't be plugged into a hub).
The install does seem to recognise the device, however, since on one occasion I didn't have it plugged in. It asked me to insert the device about a third of the way through the install and proceeded ok immediately I plugged it in (and then froze again at the end).
Couldn't find anything regarding a "bluetooth monitor" - is this part of Windows? (no reference to it in Help Files). Getting frustrated as you can imagine!! Is there a more recent version of the stack software that I can download - I've looked right through the Toshiba site but can't find anything obvious.
Many thanks for your reply and hoping you have further suggestions
David

Computer freezes while installing sound dri

while i am installing sound driver for my audigy 2ZS, the installation blocks and pc freezes.
when i reser the pc, the pc does respond when windows has finished loading.
What could be the problem?
I disable my onboard sound device.
In safe mode everything seems ok, the creative driver is enable and in good working order.
Pls Heip

Hi Jake,
Your OS. Update.

FIX FOR:computer freezes during install of Leopard on a G4 MDD w/ ATI x800!

I had problems with freezing during installation of Tiger & Leopard on my G4 MDD. It took some trouble shooting, but when I installed Tiger I found out that the freeze was from the video card I had installed, an ATI x800 xt 256mb AGP video card. I do not know why this card freezes the installation process, but I found a way to get the installation to complete without freezing. I took an old ATI PCI video card, installed it in an empty PCI slot, connected monitor to PCI card, and then installed Tiger with no problems. After install I hooked the monitor back up to the AGP ATI card and it worked great. So when my G4 froze with the Leopard installation I did the same thing, switched to an old PCI video card and Leopard installed with no problems whatsoever, then I switched back to AGP card after install. I hope this helps someone.
Message was edited by: jdswier

Thanks for taking the time off to share this information.

Computer freezes after installing new updates

I installed new updates and went to restart the computer, the apple logo came on and the progress bar went a third across then locked up with the curser spinning. Each time I try to restart the same thing happens. I can only restart in safe mode, can anyone help me with this problem.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

After installing the Yosemite upgrade the computer freezes when you click on something and the rainbow wheel pops up and takes forever to execute

computer freezes after installing Yosemite upgrade when you click on something the colored wheel pops up and takes forever to execute

Boot into the Recovery volume (boot with the Command + R keys held down), select Disk Utility and repair both the disk permissions and the disk. Reboot normally and check the performance. Any improvement?
Have you run any "cleaning" or "optimizing" apps on your Mac or install any antivirus software? Download and run Etrecheck. Copy and paste the results into your reply. It's a diagnostic tool that was developed by one of the most respected users here in the ASC to help identify the more obvious culprits.

Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its related to overheating ?

Just done a replacement of the pata DVD drive (its new and is working ok), and a fresh clean install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
I believe its related to overheating ?
iStat Pro shows GPU diode temp at 66 C, CPU at 48 C, Fan rpms is around 1000
Any ideas somebody ?
The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists.

Just installed new OS, computer freezing... HELP!!

Hey all,
So as I've been posting between here and the Panther forums recently, I belatedly upgraded my OS over the few days from the last version of Panther to the last one of Tiger, and now I've been having a frequent problem with the computer freezing.
Granted, I've had this computer crash on me before; sometimes it's with that Glazed-over grey screen & telling you that to hold down the Power button to restart it, sometimes, the mouse icon will just FREEZE up, and I'll also have to hold down the Power button. That latter type is the more common one, and though it may happen every few weeks or so, just today alone, I've had it freeze up on me FOUR TIMES. Even now, I used my old Panther boot partition--which I'd cloned to my external firewire drive--to boot up from and write this.
So I'm lead to believe it's either some problem with the new OS, or the computer itself. The thing is, this is a previously used G4, one I'd inherited from my brother, who said that it used to crash on him almost daily. He suspected it was because of either a problem with
A) the internal drive (the drive IS a 111.8 GB one, which seems a bit unusual for a boot drive; my old G4 came with a 20GB one, I haven't heard of many pre-installed internal drives being 100 GBs, though I could be wrong), or
B) 3rd party RAM that he'd had installed when he bought it, which perhaps wasn't quite as good as Mac-made RAM.
Anyway when I took it over, I made sure to reformat and zero-out the hard drive, and didn't seem to have AS many problems. However, obviously if I've upgraded to a higher OS--which of course would cause more wear on the computer--if the RAM was at all compromised before, then that would DEFINITELY be I'm having an issue now.
I verified and repaired ALL partitions before I installed this--on the 2 partitions of the internal, and my external--and they seemed to come up okay. I'm just like to try trouble-shooting--whether I need to run some tests, or make sense of the Crash Log(s)--on what could not only CONTINUE to be causing to this computer to crash, but have made it worse.
Admittedly I'm a computer noob, so I'm hardly the most knowledgeable person when it comes to detecting problems. Thing is, I really hope that this computer can tide me over until I upgrade to a newer PowerBook or iMac within the year, and was even going to try installing and learning some new design programs in the meantime. However, I don't want to get too comfortable with it--****, I CAN'T--or waste my time and money installing a software or a new RAM or an internal drive if there's no hope to salvage this thing.
PLEASE help! Thanks.
+_Other specifications_:+
+Machine Model: Power Mac G4+
+CPU Type: PowerPC G4 (3.3)+
+Number Of CPUs: 2+
+CPU Speed: 1.25 GHz+
+L2 Cache (per CPU): 256 KB+
+L3 Cache (per CPU): 1 MB+
+Memory: 1.25 GB+
+Bus Speed: 167 MHz+
+Boot ROM Version: 4.6.0f1+
MEMORY
DIMM0/J21:
+Size: 256 MB+
+Type: DDR SDRAM+
+Speed: PC2700U-25330+
DIMM1/J22:
+Size: 512 MB+
+Type: DDR SDRAM+
+Speed: PC2700U-25330+
DIMM2/J23:
+Size: 512 MB+
+Type: DDR SDRAM+
+Speed: PC2700U-25330+
DIMM3/J20:
+Size: Empty+
+Type: Empty+
+Speed: Empty+
+*ATA SPECIFICATIONS:*+
+ATA-6 Bus:+
+Vendor ID: 0x106b+
+Device ID: 0x0033+
+Revision ID: 0x0000+
ST3120026A:
+Capacity: 111.79 GB+
+Model: ST3120026A+
+Revision: 3.76+
+Removable Media: No+
+Detachable Drive: No+
+BSD Name: disk0+
+Protocol: ATA+
+Unit Number: 0+
+Socket Type: Internal+
+OS9 Drivers: No+

Nope, it'd just been the 1 "loop" (what does that even MEAN, by the way?) that had been the default when you first download and use Rember. Again, I even shut down both the display and computer "sleep" features in Energy Saver, and it ended up taking 4525 seconds, or 75 minutes.
Although "all tests passed," should I consider such a lengthy test-time as a red flag? Why would it be taking so long for such a test??
So assuming the RAM in question IS actually okay, I guess the next question is whether the computer freezing (which happened AGAIN, right before I was going to post this; Firefox was one of the only programs I had running) is due to:
A) Problems with the internal/boot drive itself (again, it IS an 111 GB drive on a G4 a used G4, I'm not sure if that's a standard factory-issue drive, and the family member who passed this computer off to me doesn't remember either). If you know of any OTHER ways to test it to make sure it's not compromised or failing (since it already seemed to come up okay on Disk Utility), I'd appreciate it.
B) Problems with the Tiger OS itself. Although the installation of it went all right, the computer DID freeze while I was doing the upgrade from 10.4 to the 10.4.11 package in Software Upgrade afterwards, so maybe that's somehow compromised the entire OS. So if there's any way to DOWNGRADE to 10.4.1, and REDO the packaged upgrade, let me know.
C) Possibility that I should still increase my RAM either way. Again, of the 4 slots, I have 2 512-pieces, 1 256, and 1 empty. So I COULD upgrade add another to the empty slot, or increase the 256 to a 512, or both. If you know of any reputable places online or elsewhere where I can buy compatible RAM for this G4, I'm all ears. I DO have some RAM on my own OLDER 2000-model G4, assuming it's even compatible (I'm sorry to say I don't know that much about RAM, never having purchased any on my own).
Any feedback or suggestions would be greatly appreciated. Thanks!

Why since installed Lion on my IMac it happened many times that my computer freeze and I have to restart everything before something work again?

Why since installed Lion on my IMac it happened many times that my computer freeze and I have to restart everything before something work again?

To get rid of "pop-up ads and other crap on my computer when I am on the internet", click on Safari in the Menu bar, and select Preferences. Next select Extensions. Delete all of them. Restart Safari.
The first step in addressing the black screen is an SMC reset.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Excerpt from
http://support.apple.com/kb/ht39

Computer freezes after Post (Cannot load/re-install windows)

Hi!
I have the K8T Neo-FIS2R motherboard 1.7 bios with an AMD Athlon 64 3000+ The computer loads up correctly, sees all of the memory, both CD rom drives, and both hard drives. However, after the post my computer goes to the Load win XP in safe mode etc. and the computer freezes right there. Also, when i try to reinstall windows XP, I just get past the boot from CD option and when it says setup is examining system hardware, it freezes at this screen and will not go any further; also when it does this, my numlock key blinks for some reason. Any answers???

Quote
Originally posted by MSUHattrick
fixed... just had to disable Legacy USB support
That would have been our next route.. haha
Good to hear, bro.
Ian

Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
Specs;
Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
Processor - Intel Core i7 Processor - i7-3820 LGA 2011
Processor fan - Intel Thermal Solution RTS2011 AC
RAM - Ballistix by Crucial - 2x 8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
Power Supply - Cooler Master Extreme Power Plus 700W
Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
I have, as far as software goes...
Windows 7 64-bit SP1
Adobe Creative Suite 5, student version or what have you.
- I do have several plugins installed as well for After Effects only.
Autodesk 3ds Max 2012
-I have several maxscripts as well as a couple plugins for 3ds Max.
UDK 2-2012 & 3-2012
NVIDIA PhysX Lab 1.1
NVIDIA Texture Tools 2
NVIDIA plugin for Photoshop
xNormal
ConTEXT
UnCodeX
Quicktime
AVG Free
Malwarebytes
7-Zip
Java
Sculptris
As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
"Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

ITunes and Computer freezes when ipod is connected

When I connect my video ipod to my computer (dell desktop) the system freezes, as in it will not respond to mouse clicks and keyboard (but can still get to task manager). When I unplug the ipod it comes back to life. Programs always freeze, but sometimes I am able to navigate within windows without it freezing, but as soon as a program is brought up, my computer falls to its knees.
I have the latest version of iTunes, and updater v. 1.1, (but I have not been able to update the firmware yet from v 1.0).
The odd thing is last night I was able to download several gigs worth of music to it without incident. I then tried to load movies (they were in the wrong format, but I didn't know it at the time), and so in an effort to correct that I uninstalled itunes, the ipod drivers, and the ipod updater programs several times.
I cannot update the ipod firmware because the computer freezes when the ipod is plugged in, so the program freezes as well. Kind of a catch 22 situation.
I have been over the forums and help archives for about an hour and a half now and I have come up dry.
Windows XP does recognize the ipod when the cable is connected, and the ipod flashes, "Do not disconnect", which it is supposed to do.
I suspect this is drivers/software, but I have no idea where to go from here.
Help?

Hey!
That EXACT thing happened to me! 2 nights ago I'm downloading like crazy, all is well. I got on LimeWire and downloaded some videos and tried to put them on my iPod. Imported them into iTunes then tried to put em on my iPod and it completely wiped out all my songs! So I get back on, put the songs back in, and about half way through the update the thing freezes. I've re-installed everything, and have reset my iPod. Did you figure out what to do? Maybe your fix will fix my problem, too.
Thank you!

Mouse stops, computer freezes. this problem occurs with any mouse: bluetooth, wired, and a spare logitech wired mouse. iMac 0S10.6.8

Help! Mouse stops, computer freezes. Restart helps for a while, then mouse doesn't respond. Problem occurs with my 4 "mice" - bluetooth, apple wireless, logitech wired & microsoft wired. Any solutions?

Problem solved!
First, the underlying cause MAY have been an unusual circumstance: a smartphone (Galaxy Android) was placed next to the iMac, turned on and with Bluetooth enabled, and left for hours to charge. Could this proximity have resulted in the Mac getting some strange Bluetooth input?
Fix: Using the temporarily-installed mouse and keyboard, I removed the existing Bluetooth keyboard and trackpad entries. (I just removed every Bluetooth device.) Then I used the standard procedure to re-pair the wireless keyboard and trackpad.
After removing all Bluetooth devices, I could not get the Mac to detect any Bluetooth devices until I restarted the Mac, at which point device detection and pairing worked flawlessly.
My best --and admittedly ignorant, sketchy-- theory: Some mal-formed event got stuck in the Bluetooth input stream, causing the trackpad up and/or down states to be hyper-sticky. That event couldn't be cleared without removing the originating device and re-pairing.
HTH

I attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded, now computer freezes after trying to load everything. possible to reverse this? options? restore hd from time machine? pls help!!!

long story short...i attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded to my desktop and now my computer freezes up after trying to load everything, and i'm not able to just drag the photos into the folder. is it possible to reverse this? what are my options? restore hd from time machine?
a further question to restoring my hd from a previous backup on time machine...it says it will erase the hd. does it actually erase everything or does it just erase anything that may have been added or downloaded since that backup? this is confusing to me.
another problem which is part of the original problem is it seems that when i connect my iphone to my computer and iphoto uploads my pics...it doesn't just upload new ones, it duplicates and uploads every picture again...which is why i have 45,000 pics...they are 40,000 duplicates! what's up with that?
I have a macbook pro, and recently updated the os to Yosemite. the iphoto app is out of date, but i'll worry about that once i can figure out how to get all those pics off the desktop. also, i recently purchased and installed 8g of new ram, but that hasn't seemed to help.
any advice would be appreciated!
thanks!!

thanks for replying.
the booting and walking away and then attempting to browse and clean method is what i've been trying to do. it won't let me drag and drop and just freezes up and goes to sleep after 2 minutes. it's a never ending battle with very few results. which is why i questioned the method of just restoring the hd from a time machine backup.
do you think restoring the hd from time machine will resolve the issue with all pics on the desktop? and everything will be as it was from the date i restore it from? sorry, as you can tell, i'm not overly computer savvy.
i have a really old desktop mac...i can try connecting the two...how does one boot a mac in 'target mode'?
as for the iphoto cleaning and organizing issue...that is what i was trying to accomplish with importing them to a folder. was going to browse and clean from there...but somehow imported to desktop which is what's complicating everything. once i get them off the desktop i can work on the iphoto issue...which as i mentioned...i didn't take 45,000 pics...i've just taken about 4,500 over the last few years, and they are being duplicated in iphoto. this was my attempt to clean it out entirely and start over. it will basically be a lot of deleting.
one problem, seems to lead me to more...which is just my luck. :-)
thanks again, for your help.

Computer freeze when updating from OS 9.2 to 10.2

Hi,
I have a grey/blue ibook 366Mhz purchased the summer of 2000. I'm trying to update to OS 10.2. So far, I've updated from 9.06 to 9.2.1 to 9.2.2 (the required sequence), updated the firmware to 4.1.7, and installed third party RAM. I bought the install discs (10.2)from ebay. They are white colored and should work, according to the help files, although the seller did not send me the third "tools" disk.
When I try to install 10.2, the computer freezes at startup. A grey screen with the apple logo appears, and then the screen freezes and splits.
The point of this upgrade is to use our Verizon internet service, which requires OS X. If there's a way around that requirement, it would be just as good.
Does this sound familiar to anyone. Thanks for any help you can offer,
Andrew

Andrew:
You apparently have an Upgrade Version, which requires that you have the previous version installed on the HDD. What you need is the Full Retail Version. Check the picture of the disks posted by ali brown by clicking here However, instead of upgrading to Jaguar, since you have to purchase new install disks anyway, I suggest that you consider upgrading to Panther, which is a lot more powerful and stable OS. Your computer will easily support Panther if it meets that other the minimum system requirements for Panther.
Panther is no longer available directly from Apple, but you can find the Full Retail Version of Panther, if you shop carefully, at online outlets like FastMac; HardcoreMac, AllMac etc. If you know what you are looking for, read all documentation carefully and ask questions of the seller, you may be able to get
Panther on eBay.
I will probably contact the ebay seller, since he gave the impression that he was selling the full retail version.
I definitely think you should do so.
Please do post back with further questions or comments.
Cheers
cornelius

Computer freezing on install

Similar Messages

Maybe you are looking for